English dropdown-ico

Manual Omega Engineering OM5-C

56 pages 0.77 mb
Download

Go to site of 56

Summary
  • Omega Engineering OM5-C - page 1

    ...

  • Omega Engineering OM5-C - page 2

    OMEGAnet SM On-Line Service http://www.omega.com Internet e-mail info@omega.com Servicing North America: USA: One Omega Drive, Box 4047 Stamford, CT 06907-0047 Tel: (203) 359-1660 e-mail: info@omega.com FAX: (203) 359-7700 Canada: 976 Berger Laval (Quebec) H7L 5A1 Tel: (514) 856-6928 e-mail: canada@omega.com FAX: (514) 856-6886 For immediate techni ...

  • Omega Engineering OM5-C - page 3

    1 GENERAL DESCRIPTION ............................................................................................................ .. 2 OM5 SELECTION GUIDE ............................................................................................................ ... 2 ANALOG VOLTAGE INPUT MODULES, NARROW BANDWIDTH: OM5-IMV/IV .................... ...

  • Omega Engineering OM5-C - page 4

    22 OM5-WMV/WV Analog V oltage Input Modules, Wide Bandwidth FEA TURES ● ACCEPTS MILLIVOLT AND VOLTAGE LEVEL SIGNALS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 100dB CMR ● 10kHz SIGNAL BANDWIDTH ● ± 0.05% ACCURACY ● ± 0.02% ...

  • Omega Engineering OM5-C - page 5

    23 Module OM5-WMV OM5-WV Input Range ± 10mV to ± 100mV ± 1V to ± 40V Input Bias Current ± 0.5nA ± 0.05nA Input Resistance Normal 200M Ω 650k Ω (minimum) Power Off 40k Ω 650k Ω (minimum) Overload 40k Ω 650k Ω (minimum) Input Protection Continuous 240Vrms Max * Transient ANSI/IEEE C37.90.1-1989 * CMV, Input to Output Continuous 1500 ...

  • Omega Engineering OM5-C - page 6

    24 OM5-TX 2-Wire T ransmitter Interface Modules ter. This allows a 2-wire loop powered transmitter to be directly connected to the module without requiring an external power supply. The regulated supply will provide a nominal +20VDC at a loop current of 4mA to 20mA. The OM5-TX will provide a 1500V isolation barrier for non-isolated 2-wire field tra ...

  • Omega Engineering OM5-C - page 7

    25 SPECIFICA TIONS Typical at T A = +25 ° C and +5V power . ORDERING INFORMA TION MODEL I NPUT RANGE OUTPUT RANGE OM5-TX-1-C 4mA to 20mA +1V to +5V OM5-TX-2-C 4mA to 20mA +2V to +10V NOTES: (1) Includes nonlinearity, hysteresis and repeatability. (2) RTI = Referenced to input. SCM5B Module OM5-TX Input Range 4mA to 20mA Input Resistor Value 20.00 ...

  • Omega Engineering OM5-C - page 8

    26 OM5-DT General Purpose Input Modules, with DC Excitation controlled, which allows these modules to share a common analog bus without the requirement of external multiplexers. The modules are designed with a completely isolated computer side circuit which can be floated to ± 50V from Power Common, pin 16. This complete isolation means that no co ...

  • Omega Engineering OM5-C - page 9

    27 Module OM5-DT Input Range ± 1V to ± 10V Input Bias Current ± 0.05nA Input Resistance Normal 2M Ω (minimum) Power Off 2M Ω (minimum) Overload 2M Ω (minimum) Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 (formerly IEEE-472) Excitation Voltage, V EXC +10.0VDC ± 2mV Excitation current 40mA (maximum) Excitation L ...

  • Omega Engineering OM5-C - page 10

    28 OM5-IFI Frequency Input Modules FEA TURES ● ACCEPTS FREQUENCY INPUTS OF 0 to 100kHz ● PROVIDES HIGH LEVEL VOLTAGE OUTPUTS ● TTL LEVEL INPUTS ● 1500 VOLT TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● ± 0.05% ACCURACY ● MIX AND MATCH OM5 TYPES ON BACKPANEL ● CSA CER ...

  • Omega Engineering OM5-C - page 11

    29 Module OM5-IFI Input Range 0 to 100KHz Input Threshold Zero Crossing Minimum Input 60mVp-p Maximum Input 350Vp-p Minimum Pulse Width 4 µ s TTL Input Low 0.8V max TTL Input High 2.4V min Input Hysteresis Zero Crossing 0.04V TTL 1.5V Input Resistance Normal 100K Ω Power Off 100K Ω Overload 100K Ω Input Protection Continuous 240Vrms max Tran ...

  • Omega Engineering OM5-C - page 12

    30 OM5-L TC Linearized Thermocouple Input Modules FEA TURES ● INTERFACES TO TYPES J, K, T, E, R, S, N, AND B THERMOCOUPLES ● LINEARIZES THERMOCOUPLE SIGNAL ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60Hz ...

  • Omega Engineering OM5-C - page 13

    31 SPECIFICA TIONS Typical at T A = +25 ° C and +5V power . Module OM5-LTC Input Range –0.1V to +0.5V Input Bias Current –25nA Input Resistance Normal 50M Ω Power Off 40k Ω Overload 40k Ω Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 CMV, Input to Output Continuous 1500Vrms max Transient ANSI/IEEE C37.90.1-198 ...

  • Omega Engineering OM5-C - page 14

    32 FEA TURES ● ACCEPTS HIGH LEVEL VOLTAGE INPUTS TO ± 10V ● PROVIDES HIGH LEVEL VOLTAGE OUTPUTS TO ± 10V ● 1500 VOLT TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1e-1989 TRANSIENT PROTECTION ● 5 POLES OF FILTERING ● 110dB CMR ● 400Hz SIGNAL BANDWIDTH ● ± 0.05% ACCURACY ● ± 0.02% LINEARITY ● MIX AND MATCH OM5 TYPES ON BACKPANEL ? ...

  • Omega Engineering OM5-C - page 15

    33 Module OM5-AV Input Voltage Range ± 5V, 0 to +5V, ± 10V, 0 to +10V Input Voltage Maximum ± 36V (no damage) Input Resistance 50M Ω Output Voltage Range ± 5V, 0 to +5V, ± 10V, 0 to +10V Over Range Capability 5% @ 10V output Output Drive 50mA max Output Resistance 0.5 Ω Output I Under Fault, Max 75mA Output Protection Transient ANSI/IEEE C ...

  • Omega Engineering OM5-C - page 16

    34 number 50865-5. The captive nut for the 3mm mounting screw can be obtained from PEM (Penn Engineering and Manufacturing), part number KFS2-M3. The following mechanical drawing is useful if designing circuit boards to mount the OM5 modules. Many sockets are available which accept the mounting pins. As an example, AMP Inc. provides a socket with p ...

  • Omega Engineering OM5-C - page 17

    35 Accessories for OM5 Analog Modules FEA TURES ● SINGLE, DUAL, 8-, AND 16-POSITION BACKPANELS ● DIN RAIL MOUNT BACKPANELS ● 19-INCH MOUNTING RACK FOR BACKPANELS ● MULTIPLEXED AND NON-MULTIPLEXED BACKPANELS ● INTERFACE CABLES ● MODULE EVALUATION BOARD ● CABLE-TO-SCREW-TERMINAL INTERFACE BOARD OM5-BP-16-C 16 POSITION ANALOG I/O BACKP A ...

  • Omega Engineering OM5-C - page 18

    36 FIGURE 2. OM5-BP-16-C Schematic. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 6 4 2 5 3 1 –EXC +EXC –In +In TB1 TB17 PCOM LED +In +EXC +SEN OMX-1362-C OMX-CJC-C –In –EXC –SEN Channel 1 12 3 4 Fuse (4A) F1 PCOM +5 +5 DZ1 5.6V PCOM 4 Amps Jumper J3 Jumper J1 Jumper J2 Signal Ground and Grounding Bolt R 1 1 2 3 4 5 ...

  • Omega Engineering OM5-C - page 19

    37 ELECTRICAL P1 AND P2 CONNECTOR Connection to the host system is made at connectors P1 and P2. These connectors are electrically equivalent. Two connectors are provided to allow both analog input and analog output from host systems having individual input and output connectors. ADJACENT CHANNEL JUMPERS Adjacent channels may be connected together ...

  • Omega Engineering OM5-C - page 20

    38 DESCRIPTION The OM5-BP-16-MUX-C 16 channel backpanel (Figure 5) can accept any of the OM5 analog modules in any mixture. It can be mounted on the OMX-1363-C 19-inch metal rack. The OM5-BP-16-MUX-C has two analog buses; one for analog input and one for analog output. This two- bus configuration takes advantage of the switch controlled outputs on ...

  • Omega Engineering OM5-C - page 21

    39 FIGURE 6. OM5-BP-16-MUX-C Schematic. SCM5B 22 20 18 16 6 4 2 5 3 1 23 21 19 17 PCOM I/O COM –EXC +EXC –In +In +5 TB1 TB17 PCOM RD EN V OUT V IN +In +EXC +SEN –In –EXC –SEN Channel 1 WR EN NC OP1 12 3 4 Fuse F1 PCOM 4 Amps +5 +5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 VREAD ACOM VWRITE SNS LO ACOM ACOM R0 ...

  • Omega Engineering OM5-C - page 22

    40 ELECTRICAL P1 CONNECTOR The 26 pin P1 connector provides the signal interface between the OM5-BP- 16-MUX-C backpanel and the host measurement system. Two separate analog bus connections are provided; one for analog input signals and one for analog output signals. Two sets of six address lines and an enable pin allow input and output modules to b ...

  • Omega Engineering OM5-C - page 23

    41 OM5-BP-SKT -C /-2-C ONE / TWO POSITION ANALOG I/O BACKP ANELS DESCRIPTION The OM5-BP-SKT-C is a single channel mounting panel for the OM5 modules. The OM5-BP-2-C is a dual channel mounting panel for the OM5 modules. They both are DIN rail compatible. See Figures 9 and 10 for wiring diagrams, Figures 11 and 12 for schematics. The following access ...

  • Omega Engineering OM5-C - page 24

    42 FIGURE 12. OM5-BP-2-C Schematic. FIGURE 11. OM5-BP-SKT-C Schematic. * NOTE: OMX-1362-C resistors are not installed at factory. OMX-CJC-C 22 RD EN 20 V OUT 18 V IN 16 PCOM 6 4 2 5 3 1 23 21 19 17 –EXC +EXC –In/ –Out +In/ +Out +5V TB1 +In +EXC +SEN OMX-1362-C –In –EXC –SEN WR EN DATA I/O COM 12 3 4 PCOM +5V J1 TB2 43 2 1 I/O COM/ – ...

  • Omega Engineering OM5-C - page 25

    43 OM5-BP-8-C 8 POSITION ANALOG I/O BACKP ANEL, NON-MUL TIPLEXED A temperature sensor is mounted on each channel to provide cold junction compensation for thermocouple input modules (See Figure 14 for Schematic- DESCRIPTION The OM5-BP-8-C analog module mounting board has a capacity of eight analog input and/or output modules in any combination. It ...

  • Omega Engineering OM5-C - page 26

    44 FIGURE 14. OM5-BP-8-C Schematic. I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 I/O 8 I/O 9 I/O 10 I/O 11 I/O 12 I/O 13 I/O 14 I/O 15 I/O 16 1 5 7 11 13 17 19 23 2 4 8 10 14 16 20 22 25 3 6 9 12 15 18 21 24 26 Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 Channel 11 Channel 12 Channel 13 Channel ...

  • Omega Engineering OM5-C - page 27

    45 OM5-BP-8-MUX-C 8 POSITION ANALOG I/O BACKP ANEL, MUL TIPLEXED DESCRIPTION The OM5-BP-8-MUX-C backpanel (Figure 15) can accept up to eight OM5 modules in any combination. It can be mounted on the OMX-1363-C 19-inch metal rack. The OM5-BP-8-MUX-C has two analog buses; one for analog input and one for analog output. This two-bus configuration takes ...

  • Omega Engineering OM5-C - page 28

    46 FIGURE 16. OM5-BP-8-MUX-C Schematic. VREAD ACOM SNS LO ACOM ACOM RD EN R5 R4 R3 R2 R1 R0 WR EN W5 W4 W3 W2 W1 W0 Data DCOM DCOM P1 7 6 5 4 Y3 Y2 Y1 Y0 G B A 1 3 2 Data NC NC 1 2 3 4 5 1 2 3 4 5 6 19 12 11 10 9 8 7 20 18 17 16 15 14 13 22 23 24 25 26 VWRITE 9 10 11 12 1/2 U1 74LS139 Y3 Y2 Y1 Y0 G B A 15 13 14 6 7 8 9 10 1/2 U1 74LS139 P2 J6 J5 ...

  • Omega Engineering OM5-C - page 29

    47 DESCRIPTION The OMX-1324-C is a universal interface board which converts a 26-pin ribbon cable input to 26 screw terminals for discrete wire. It can be mounted on the back of the OMX-1363-C mounting rack or on a DIN rail. Required mounting hardware is included. Use OMX-1315-xx-C cable (See Figure 18 for dimensions). OMX-1324-C UNIVERSAL INTERF A ...

  • Omega Engineering OM5-C - page 30

    48 OM5-BP-SKT -C ANALOG MODULE EV ALUA TION BOARD FIGURE 19. OM5-BP-SKT-C Evaluation Board Dimensions And Pin Layout. FIGURE 20. OM5-BP-SKT-C Evaluation Board Schematic. DESCRIPTION The OM5-BP-SKT-C is a single channel board with a test socket for OM5 module evaluation (Figure 19). All signal input/output, control, and power connections are connect ...

  • Omega Engineering OM5-C - page 31

    49 OM5-1315-XX-C, OMX-CAB-01-C INTERF ACE CABLES OMX-CAB-01-C Daisy-chain cable provides interconnection between a maximum of four OM5-BP-16-MUX-C and eight OM5-BP-8-MUX-C backpanels (See Figure 22). FIGURE 21. OMX-1315-XX-C System Interface Cable. FIGURE 22. OMX-CAB-01-C Daisy-Chain Cable. FIGURE 23. Application Of OMX-CAB-01-C Daisy-Chain Cable. ...

  • Omega Engineering OM5-C - page 32

    50 OMX-CJC-C ENCAPSULA TED COLD JUNCTION COMPENSA TION DESCRIPTION The OMX-CJC-C is the identical circuit used on the OM5-BP backpanels except it is packaged as a component for use in customer designed mounting boards (Figure 24). When interfaced to an OM5-ITC or OM5-LTC module, the transfer function of the voltage across the +SEN and –SEN pins i ...

  • Omega Engineering OM5-C - page 33

    51 OMX-955-C, OMX-955-220-C POWER SUPPLIES FIGURE 25. OMX-955/955-220-C Physical Dimensions. DESCRIPTION The OMX-955-C encapsulated power supplies are available in 120VAC or 220VAC input voltage ranges and provide 5VDC outputs suitable for all OM5 modules. They are designed to mount on the OMX-1363-C metal rack. The supplies are UL-recognized and C ...

  • Omega Engineering OM5-C - page 34

    52 OMX-977-C, OMX-977-220-C POWER SUPPLIES FIGURE 26. OMX-977/977-220-C Physical Dimensions. DESCRIPTION The OMX-977 Linear Power Supplies are available in 120VAC or 220VAC input. They have sufficient output current capacity to supply any combination of OM5 modules. The OMX-1363-C metal rack provides mounting capability for the power supplies (See ...

  • Omega Engineering OM5-C - page 35

    2 SCM5B OMEGA® OM5 Series Isolated Signal Conditioning Modules are low cost, high performance, plug-in signal conditioners. Each OM5 module provides a single channel of isolated analog input or output. Input modules interface to all types of external sensors. The modules filter, isolate, amplify, and convert the input signal to a high-level analog ...

  • Omega Engineering OM5-C - page 36

    3 VOLTAGE OUTPUT MODULES, 50mA DRIVE CAPACITY (400 Hz BW) MODEL INPUT RANGE OUTPUT RANGE OM5-AV-1-C 0 to +5V ± 5V OM5-AV-2-C ± 5V ± 5V OM5-AV-3-C ± 5V 0 to +5V OM5-AV-4-C 0 to +10V ± 10V OM5-AV-5-C ± 10V ± 10V OM5-AV-6-C ± 10V 0 to +10V OM5-AV-7-C ± 5V ± 10V ACCESSORIES MODEL DESCRIPTION OM5-BP-16-C Non-multiplexed, 16 channel backpanel O ...

  • Omega Engineering OM5-C - page 37

    4 OM5-IMV/IV Analog V oltage Input Modules, Narrow Bandwidth FEATURES ● ACCEPTS MILLIVOLT AND VOLTAGE LEVEL SIGNALS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60Hz, 90dB at 50Hz ● ± 0.05% ACCURACY ● ? ...

  • Omega Engineering OM5-C - page 38

    5 SPECIFICA TIONS Typical at T A = +25 ° C and +5V power. MODEL INPUT RANGE OUTPUT RANGE OM5-IMV-10A-C –10mV to +10mV –5V to +5V OM5-IMV-50A-C –50mV to +50mV –5V to +5V OM5-IMV-100A-C –100mV to +100mV –5V to +5V OM5-IMV-10B-C –10mV to +10mV 0V to +5V OM5-IMV-50B-C –50mV to +50mV 0V to +5V OM5-IMV-100B-C –100mV to +100mV 0V to +5V ...

  • Omega Engineering OM5-C - page 39

    6 OM5-II Analog Current Input Modules FEA TURES ● ACCEPTS MILLIAMP LEVEL SIGNALS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60Hz, 90dB AT 50Hz ● ± 0.05% ACCURACY ● ± 0.02% LINEARITY ● CSA CERTIFIED ...

  • Omega Engineering OM5-C - page 40

    7 Input Range 0mA to 20mA or 4mA to 20mA Input Resistor Value 20.00 Ω Accuracy ± 0.1% Stability ± 10ppm/ ° C Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 CMV, Input to Output Continuous 1500Vrms max Transient ANSI/IEEE C37.90.1-1989 CMR (50Hz or 60Hz) 160dB NMR 95dB at 60Hz, 90dB at 50Hz Accuracy (1) ± 0.05% span ...

  • Omega Engineering OM5-C - page 41

    8 FEA TURES ● INTERFACES RMS VOLTAGE (0 – 300V) OR RMS CURRENT (0 – 5A) ● DESIGNED FOR STANDARD OPERATION WITH FREQUENCIES OF 45HZ TO 1000HZ (EXTENDED RANGE TO 20Khz) ● COMPATIBLE WITH STANDARD CURRENT AND POTENTIAL TRANSFORMERS ● INDUSTRY STANDARD 0-5V OUTPUT ● ± 0.25% FACTORY CALIBRATED ACCURACY (ACCURACY CLASS 0.2) ● 1500 VRMS C ...

  • Omega Engineering OM5-C - page 42

    9 MODEL INPUT* (rms) OUTPUT* (dc) OM5-IAC-100B-C 0-100mV 0-5V OM5-IAC-1B-C 0-1V 0-5V OM5-IAC-10B-C 0-10V 0-5V * Modules can be ordered with other input/output ranges. Consult factory for ordering details and specifications. ORDERING INFORMA TION Input Signal Range 100mV to 10V rms, 0 to 5A rms Standard Frequency Range 45Hz to 1000Hz Extended Freque ...

  • Omega Engineering OM5-C - page 43

    10 OM5-IP/IC/IN Linearized 2- or 3-Wire R TD Input Modules FIGURE 1. OM5-IP/IC/IN Block Diagram. circuit which can be floated to ± 50V from Power Common, pin 16. This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the output switch. If desired, the output switch can be turned on ...

  • Omega Engineering OM5-C - page 44

    11 Module OM5-IP/IC/IN Input Range Limits –200 ° C to +850 ° C (100 Ω Pt) –80 ° C to 320 ° C (120 Ω Ni) –100 ° C to 260 ° C (10 Ω Cu) Input Resistance Normal 50M Ω Power Off 40k Ω Overload 40k Ω Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 Sensor Excitation Current 1 00 Ω Pt, 120 Ω Ni 0.25mA ...

  • Omega Engineering OM5-C - page 45

    12 Each OM5 4-wire RTD input module provides a single channel of RTD input which is filtered, isolated, amplified, linearized, and converted to a high level analog voltage output. This voltage output is logic switch controlled, which allows these modules to share a common analog bus without the requirement of external multiplexers. The OM5 modules ...

  • Omega Engineering OM5-C - page 46

    13 Input Range Limits –200 ° C to +850 ° C (100 Ω Pt) –80 ° C to +320 ° C (120 Ω Ni) –100 ° C to +260 ° C (10 Ω Cu) Input Resistance Normal 50M Ω Power Off 40k Ω Overload 40k Ω Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 Sensor Excitation Current 100 Ω Pt, 120 Ω Ni 0.25mA 10 Ω Cu 1.0mA Lea ...

  • Omega Engineering OM5-C - page 47

    14 FEA TURES ● INTERFACES TO POTENTIOMETERS UP TO 10,000 OHMS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500 VOLT TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60HZ, 90dB AT 50HZ ● MIX AND MATCH OM5 TYPES ON BACKPANEL ● CSA CERTIFIED, FM APPROVED, CE COMP ...

  • Omega Engineering OM5-C - page 48

    15 Input Range 0 to 10K Ω Input Resistance Normal 50M Ω Power Off 40K Ω Overload 40K Ω Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 Sensor Excitation Current 0.25mA; 100 Ω , 500 Ω , 1K Ω sensor 0.10mA; 10K Ω sensor Lead Resistance Effect ± 0.01 Ω / Ω ; 100 Ω , 500 Ω , 1K Ω sensor ± 0.02 Ω / ...

  • Omega Engineering OM5-C - page 49

    16 OM5-ITC Thermocouple Input Modules The OM5-ITC modules are designed with a completely isolated computer side circuit which can be floated to ± 50V from Power Common, pin 16. This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the output switch. If desired, the output switch ca ...

  • Omega Engineering OM5-C - page 50

    17 Module OM5-ITC Input Range -0.1V to +0.5V Input Bias Current -25nA Input Resistance Normal 50M Ω Power Off 40k Ω Overload 40k Ω Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 CMV, Input to Output Continuous 1500Vrms max Transient ANSI/IEEE C37.90.1-1989 CMR (50Hz or 60Hz) 160dB NMR 95dB at 60Hz, 90dB at 50Hz Accu ...

  • Omega Engineering OM5-C - page 51

    18 OM5-WBS Strain Gage Input Modules, Wide Bandwidth FEA TURES ● INTERFACES TO 100 Ω THRU 10k Ω , FULL-BRIDGE, HALF-BRIDGE, OR QUARTER-BRIDGE STRAIN GAGES ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● FULLY ISOLATED EXCITATION SUP ...

  • Omega Engineering OM5-C - page 52

    19 Full Bridge Half Bridge Module OM5-WBS38-01-C, -WBS-1/-2/-4/-5-C OM5-WBS38-03-C,-WBS-3-C Input Range ± 10mV to ± 100mV * Input Bias Current ± 0.3nA * Input Resistance Normal 50M Ω * Power Off 40k Ω * Overload 40k Ω * Signal Input Protection Continuous 240Vrms max * Transient ANSI/IEEE C37.90.1-1989 * Excitation Output (-1/-2/ -3/ -5-C) ...

  • Omega Engineering OM5-C - page 53

    20 FEA TURES ● ACCEPTS HIGH LEVEL VOLTAGE OR PROCESS CURRENT INPUT ● UNIPOLAR OR BIPOLAR CURRENT OUTPUT ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● OUTPUT PROTECTED TO 240VAC CONTINUOUS ● 110dB CMR ● 400Hz SIGNAL BANDWIDTH ● ± 0.05% ACCURACY ● ± 0.02% LINEARITY ● CSA CERTIFIED, FM APPROVED ...

  • Omega Engineering OM5-C - page 54

    21 Unipolar Output Current Module OM5-IVI Input Voltage Range ± 5V or 0V to +5V Input Current Range (–05) 0 to 20mA Input Voltage Maximum ± 36V (no damage) Input Current, Maximum (–05) 75mA (no damage) Input Resistance 50M Ω Input Resistance (–05) 20 Ω Output Current Range 0 to 20mA or 4 to 20mA Over Range Capability 10% Output Complian ...

  • Omega Engineering OM5-C - page 55

    WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months 13 months from date of purchase. OMEGA Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty one (1) year product warranty to cover handling and shipping time. This ...

  • Omega Engineering OM5-C - page 56

    TEMPERATURE þ Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies þ Wire: Thermocouple, RTD & Thermistor þ Calibrators & Ice Point References þ Recorders, Controllers & Process Monitors þ Infrared Pyrometers PRESSURE, STRAIN AND FORCE þ Transducers & Strain Gauges þ Load Cells & Pressure Gauges ...

Manufacturer Omega Engineering Category Electric Heater

Documents that we receive from a manufacturer of a Omega Engineering OM5-C can be divided into several groups. They are, among others:
- Omega Engineering technical drawings
- OM5-C manuals
- Omega Engineering product data sheets
- information booklets
- or energy labels Omega Engineering OM5-C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Omega Engineering OM5-C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Omega Engineering OM5-C, service manual, brief instructions and user manuals Omega Engineering OM5-C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Omega Engineering OM5-C.

Similar manuals

A complete manual for the device Omega Engineering OM5-C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Omega Engineering OM5-C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Omega Engineering OM5-C.

A complete Omega Engineering manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Omega Engineering OM5-C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Omega Engineering OM5-C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Omega Engineering OM5-C, that we can find in the current document
3. Tips how to use the basic functions of the device Omega Engineering OM5-C - which should help us in our first steps of using Omega Engineering OM5-C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Omega Engineering OM5-C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Omega Engineering OM5-C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Omega Engineering OM5-C?

Use the form below

If you did not solve your problem by using a manual Omega Engineering OM5-C, ask a question using the form below. If a user had a similar problem with Omega Engineering OM5-C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)