Manual Honeywell HEGS5001

68 pages 0.84 mb
Download

Go to site of 68

Summary
  • Honeywell HEGS5001 - page 1

    HEGS5000/HEGS5001 Joystick Controller PTZ, MUX, and VCR Control User Guide 900.0800 – June 2006 - Rev 1.01 ...

  • Honeywell HEGS5001 - page 2

    Rev. 1.01 ii 900.0800 19-Jun-06 ISSUE DATE REVISIONS 900.0394 1.0 February 2006 Initial Release 900.0800 1.0 June 2006 Correct power supply par t # and voltage 1.01 June 2006 Correct RS232 wiring ...

  • Honeywell HEGS5001 - page 3

    FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: This equipment has been tested and found to comply with the limits for a Class A digital device, pu rsuant to part 15 of the FCC rules. These limits are designed to provide reasonab le protection against harmful interference when the equipment is operated in a commercial environment. This equipment ...

  • Honeywell HEGS5001 - page 4

    IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS – All safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS – All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INST ...

  • Honeywell HEGS5001 - page 5

    Rev. 1.01 v 900.08 00 19-Jun-06 IMPORTANT SAFEGUARDS 14. POWER-CORD PROTECTION – Powe r supply cords should be r outed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular atte ntion to cords and plugs, convenience receptacles, and the point where they exit from the monitor. 15. OBJECT AND ...

  • Honeywell HEGS5001 - page 6

    EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is inten ded to alert the user to the presence of uninsu lated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point with i ...

  • Honeywell HEGS5001 - page 7

    Rev. 1.01 vii 900.0800 19-Jun-06 TABLE OF CONTENTS SECTION 1: INTRODUCTON ................................................................................................................... 1 1.1 PRODUCT DESCRIPTION ............................................................................................................ 1 1.2 FEATURES .......... ...

  • Honeywell HEGS5001 - page 8

    Rev. 1.01 viii 900.0800 19-Jun-06 TABLE OF CONTENTS, CONTINUED 5.2.8 List VectorScan Contents .............................................................................................. 32 5.2.9 Program a Tour .............................................................................................................. 33 5.2.10 Run a Tour ..... ...

  • Honeywell HEGS5001 - page 9

    LIST OF FIGURES, CONTINUED Figure 6. HEGS5000 Icon Overlay ................................................................................................................. 19 Figure 7. MUX Mode English Text Version .................................................................................................... 43 Figure 8. MUX Mode Icon Versio ...

  • Honeywell HEGS5001 - page 10

    Rev. 1.01 x 900.0800 19-Jun-06 Notes: ...

  • Honeywell HEGS5001 - page 11

    SECTION 1: INTRODUCTON 1.1 PRODUCT DESCRIPTION The HEGS5000 is a controller designed to pr ovide simple operati on of the Honeywell KD6/HD6 series domes, V CRs, and multiplexers: 16 multiplexers, 16 VCRs and 256 domes can be controlled via the HEGS5000’s two seri al ports. All function s of the individual units are supported remotely and intellig ...

  • Honeywell HEGS5001 - page 12

    Rev. 1.01 2 900.0800 19-Jun-06 Notes: ...

  • Honeywell HEGS5001 - page 13

    SECTION 2: INSTALLATION AND EQ UIPMENT SETUP 2.1 CONNECTIONS A terminal block is provided for connect ion bet ween the HEGS5000 controller and peripheral equipment. A coiled cable is provided for connection b etween the HEGS5000 and the ter minal block. Plu g one end of the coi led cable into the connector on the back of the HEGS5000 and the other ...

  • Honeywell HEGS5001 - page 14

    2.2 INSTALLATION DIAGRAMS Input Input Cam 16 Cam 1 Output Outpu t Sp o t Sp o t Monitor Main Monitor Main RS-48 5 PSU 12 VDC 2A RS-23 2 HEGS5000 System Controller VCR KX1610CN Multiplexe r 2 - RX (data in) 5 - Ground 2 - RX (data in) 5 - Ground RS-2 32 RS-2 32 +12VDC GND RS-232 (TX) RS-232 (R X) RS-485 (D +) RS-485 (D -) 1 1 2 2 3 3 4 4 5 5 6 6 7 7 ...

  • Honeywell HEGS5001 - page 15

    2.2 INSTALLATION DIAGRAMS, CONTINUED +12VDC GND RS-232 ( TX) RS-232 ( RX) RS-485 ( D+) RS-485 (D-) KD6 / KD6Z Dom e -32 KD6 / KD6Z Dom e - 1 5 5 1 1 9 9 6 6 6 6 9 9 1 1 5 5 DB-9 F emale re ar vi ew of co nn e cto r DB-9 Ma le re ar vi ew of co nn e cto r DB-9 Ma le re ar vi ew of co nn e cto r DB-9 F emale re ar vi ew of co nn e cto r Multip le x e ...

  • Honeywell HEGS5001 - page 16

    2.2 INSTALLATION DIAGRAMS, CONTINUED +12V DC +12VDC GND GND RS -232 (T X ) RS- 232 (TX ) RS -232 (RX ) RS-232 ( RX) RS- 232 VC R c abl e c o nne ct i on s RS-232 MUX cabl e co nnections RS -485 (D +) RS-485 ( D+) RS- 48 5 (D -) RS-485 ( D-) 1 5 6 9 9 6 RS-232 to VCR RS-232 to MUX T o HEGS5000 T o HEGS5000 DB-9 Female rear v iew of connec tor DB-9 M ...

  • Honeywell HEGS5001 - page 17

    Rev. 1.01 7 900.0800 19-Jun-06 2.3 EQUIPMENT SETUP 2.3.1 KD6/HD6 Setup The KD6/HD6 Dome must be set to Honeywell Diamond protocol. The address of the KD6/HD6 dome must be se t to match the address set for that camera number in the HEGS5000. That is, the KD6/HD 6 camera defined as c amera 1 in the HE GS5000 system setup must be physically addressed ...

  • Honeywell HEGS5001 - page 18

    Rev. 1.01 8 900.0800 19-Jun-06 Notes: ...

  • Honeywell HEGS5001 - page 19

    SECTION 3: MODES OF OPERATION 3.1 MODES OF OPERATION There are two modes of operation when usin g the HEGS5000 as a standalone controller: 1. HEGS50 00 = Standal one = PTZ control (K D6/HD6 and KDZ ser ies) only. Note : KDZ series domes have been discontinued. 2. HEGS5001 = MUX Mode = MUX/VCR control capability and PTZ control There is a third mode ...

  • Honeywell HEGS5001 - page 20

    3.2 MODE CONFIGURATION, CONTINUED 3. Press  or  keys to scroll through th e available options. • Standalone (control KD6/ HD6 PTZs only) • Mux Mode (control multiplexers, VCRs, and KD6/HD6 PTZs) • System Mode (must be us ed with HSX3208L switcher) • Stdalone/Mux Fw. (upload new firmware to the HEGS5000). Refer to Section 7 for uploadi ...

  • Honeywell HEGS5001 - page 21

    3.3.1 Default Password Master Default Password is 1994 . Operator Default Password is 1111 . Master mode has acces s to all menus. Operator mode allows access to all menus except those in which ch anges to system setup are i nvolved. The table below shows which menus and function s are available for each mode. Description Operator Master Save PreSh ...

  • Honeywell HEGS5001 - page 22

    3.3.4 Log Out To log off the controller, p erform the following steps. 1. Press the Run Me nu ( Run 1. ___ 3. ___ ) key until Logout is displayed on the LCD di splay. 2. Press Enter ( ) . Yes is displayed on the LCD display. 3. Press Enter ( ) to select Ye s or press Menu ESC ( 1. ____ 2. ____ 3. ____ ) to cancel logging out. The LCD display return ...

  • Honeywell HEGS5001 - page 23

    SECTION 4: SYSTEM SETUP 4.1 SETTING UP THE CONTROLLER The components controlled by the HEGS5000 are defined in the SYSTEM MENU. This menu is available only wh en logged in as a Master User. • The SYSTEM MENU is in tree structure. • Several tools, including the LEFT (  ) and RIG HT (  ) keys, Enter ke y ( ), and the UP (  )and DOW N ( ? ...

  • Honeywell HEGS5001 - page 24

    4.2 NAVIGATING THE MENUS, CONTINUED • To exit the System Menu, use the joystick to choose menu 8 (Exit ) , then press Enter ( ) or “ Z oom Out ” until the setup menu is exited. When you exit a menu, the controller displays Saving Settings, Please Wait. After the settings have been saved, the controller returns to normal operation. 4.3 MENUS M ...

  • Honeywell HEGS5001 - page 25

    4.3 MENUS, CONTINUED Cameras Menu Name Menu Number Description Cameras 3.0 Used to set the type of camera and the address to which the controller sends commands when this camera is selected on the monitor or spot moni tor if the controller is in Mux Mode . Press Enter ( ) to ac cess this menu. Camera Num 3.1 Camera Number – use the number keys or ...

  • Honeywell HEGS5001 - page 26

    4.3 MENUS, CONTINUED KDZ SETUP Menu Name Menu Number Description KDZ Setup 4.0 Used to program the address of any KDZ connected to the HEGS5000. Press Enter ( ) to access this menu. Serial No. 4.1 Using the number keys, enter the serial number of the KDZ dome. Press Enter ( ). The serial number is supplied with the dome and is printed on the dome. ...

  • Honeywell HEGS5001 - page 27

    4.3 MENUS, CONTINUED General Menu Name Menu Number Description General 7.0 Used to deactivate the buzzer or set language options. Press Enter ( ) to access this menu. Buzzer 7.1 Use the + and – keys to toggle the buzzer ON or OFF. Press Clear/Manual ( ) to exit this menu. Language 7.2 Menus are currently only available in English . Use the + and ...

  • Honeywell HEGS5001 - page 28

    Rev. 1.01 18 900.0800 19-Jun-06 Notes: ...

  • Honeywell HEGS5001 - page 29

    SECTION 5: STANDALONE MODE HEGS5000 5.1 OPERATION When the HEGS5000 Controller is in Standalone Mode , a user can control and p rogram KD6/HD6 PTZ camer as. The KD6/HD 6 PTZ cameras must be defined in the HEGS5000 as defined in Section 2. 3.1 and 4.3. There are two overlays, English text version and Icon version, for th e standalone mode. System Co ...

  • Honeywell HEGS5001 - page 30

    5.1.1 Camera (KD6/HD6) Selection To select a camera for control: 1. Enter the camera number (1-256) using the numeric keyp ad. 2. Press the Camera ( ) key. 5.1.2 Manual Control Table 1. Manual Control Function Description Pan/Tilt Use the joystick to control (pan and tilt) the camera. Move the joystick up and down for tilt functions and left and ri ...

  • Honeywell HEGS5001 - page 31

    Table 1. Manual Control, Contin ued Function Description Freeze Video ( ) Press the Freeze Video ( ) key to freeze or unfreeze the current video scene. When the video is frozen, an asterisk is displayed in the bottom left corner of the display and the camera remains on the current scene until the operator unfreezes the video. An operator can manual ...

  • Honeywell HEGS5001 - page 32

    5.2 KD6/HD6 DOME MENUS The HEGS5000 contr oller can be used to program KD6/HD 6 PTZ units. 1. Press the Dome M enu ( 1. __ _ 3. __ _ ) key. The following is displayed on the LCD screen. < DOME MENU > Dome Setup Menu 2. Press the + or – keys to scroll through the available menus. When the desired menu is displayed, press Enter ( ) to access ...

  • Honeywell HEGS5001 - page 33

    Table 2. DOME MENU ( 1. __ _ 3. __ _ ) Key – Access/Exit Dome Menus, Continued Menu Description Tour Menu Accesses the KD6/HD 6 Tour menu. Use +/- keys to scroll through menu options:  Program Tour (1-3)  Run Tour (1-3)  Delete Tour (1-3) Keys Description  Position the cursor when entering text  Move to the previous/next field with ...

  • Honeywell HEGS5001 - page 34

    5.2.1 Dome Setup Menu, Contin ued The on-screen menu is displayed on the monitor whe re the KD6/HD6 video is viewed. 518584-2980 Rev X 1 Language ............... English 2 Display Options 3 Control Options 4 Diagnostic Options 5 Camera Options 6 Function Programming ESC TO EXIT UltraDome HD6i To access a menu, press the number b eside the option. T ...

  • Honeywell HEGS5001 - page 35

    5.2.2 Program PreShot There are two methods for programming and sa ving PreShots. The first method quickly saves the current camera scene and assigns a pr edefined title. For example, PreShot 1 is titled PS1, PreShot 2 is titled PS2, et c. The second method allows the user to program a 24-character title. Note: Operators may program PreSho ts 0-10. ...

  • Honeywell HEGS5001 - page 36

    5.2.2 Program PreShot, Continued 6. Press the Enter ( ) key. The following is displayed on the controller’s LCD. Rev. 1.01 26 900.0800 19-Jun-06 Follow the on-screen prompts th at appear on the mo nito r where the KD6/HD6 video is viewed. 7. Enter the PreShot number (0- 99) using the numeric keypad and press the Enter ( ) key. If the selected Pre ...

  • Honeywell HEGS5001 - page 37

    5.2.2 Program PreShot, Continued 9. Press the + or – key until the character for the desired action is displayed on the LCD and Press Character Select ( A BC ) . Refer to the above table for the required steps after selecting a character. 10. Program another PreShot by repeating steps 7 through 9 or press Clear/Manual ( ) to exit the PreShot Prog ...

  • Honeywell HEGS5001 - page 38

    5.2.2 Program PreShot, Continued g. Press the +/- key until uppe r case D is displayed on t he controller LCD and the n press Character Select ( A BC ). h. Press the +/- key until lower case o is displayed on the controller LCD and the n press Character Select ( A BC ). i. Press the +/- key until lower case o is displayed on the controller LCD and ...

  • Honeywell HEGS5001 - page 39

    5.2.4 List Programmed PreShots To view a listing of the programmed PreShots, perform the followi ng steps. This display cannot be edited; it is for viewing purposes only. 1. Press Dome Menu ( 1. __ _ 3. __ _ ). 2. Press + or – until PreShot Menu is displayed on t he controller LCD. 3. Press Enter ( ). 4. Press + or – until List is displayed on ...

  • Honeywell HEGS5001 - page 40

    5.2.5 Programming a VectorScan N ote: VectorScan Programming is only available to Master users. 1. Press the Dome Menu ( 1. __ _ 3. __ _ ) key. 2. Press the + or – key until VectorScan Menu is displayed. 3. Press the Enter ( ) key. 5. Press the + or – key until Program is displayed. 6. Press the Enter ( ) key. Follow the on-screen prompts that ...

  • Honeywell HEGS5001 - page 41

    5.2.5 Programming a Vecto rScan, Continued 13. Press Enter ( ) when finish ed adding PreShots. The follo wing commands are displayed on the bottom of the monit or. VectorScan Comma nds E= Edit Press + or – key until E is displayed on LCD and press Char Select. Reposition the PTZ and/or change the lens settings, then repeat ste ps 6 and 7. D = Del ...

  • Honeywell HEGS5001 - page 42

    5.2.7 List VectorScans To view a list of the programmed Vector Scans: 1. Press the Dome Menu ( 1. __ _ 3. __ _ ) key. 2. Press + or – until VectorScan Menu is displayed on the LCD and press Enter ( ). 3. Press + or – until List is displayed on the LCD and press Enter ( ). The VectorScan list, includi ng number and title, is displayed on t he mo ...

  • Honeywell HEGS5001 - page 43

    5.2.8 List VectorScan Contents, Continued 5. When finished viewing the VectorScan contents, press Enter ( . 6. To exit the menu on the LCD controller , press Dome Men u ( 1. __ _ 3. __ _ ) or press the Menu Esc ( 1. ____ 2. ____ 3. ____ ) key until the LCD display is cleared of all menus. 5.2.9 Program a Tour Note: Tour Programming is only availabl ...

  • Honeywell HEGS5001 - page 44

    5.2.11 Delete a Tour 1. Press the Dome Menu ( 1. __ _ 3. __ _ ) key. 2. Press + or – until Tour Menu is displayed. 3. Press Enter ( ). 4. Press + or – until Delete is disp layed. 5. Press Enter ( ). 6. Enter the desired tour # ( 1-3 ) using the numeric keys. 7. Press Enter ( ). 5.2.12 Programming Sector IDs Sector IDs are used for labeling spec ...

  • Honeywell HEGS5001 - page 45

    5.2.12 Programming Sect or IDs, continued 8. Enter the Sector title (up to 24 characters) a. Press the + or – key until the desired character is displayed on the LCD screen, and then press Character Select ( A BC ). The controller sends the character to the KD6/HD6. b. Continue selecting characters and press Character Select ( ABC ) until the des ...

  • Honeywell HEGS5001 - page 46

    5.2.12 Programming Sect or IDs, continued b. Using the joystick, move the PTZ so the upper right corner of the sector is centered on the monitor, and then press Enter ( ). Factory set password If the upper right tilt position is below the lower left til t position, the message “Illegal Tilt Direction” is dis played. Readjust the tilt p osition ...

  • Honeywell HEGS5001 - page 47

    5.2.13.1 Programming/Editing/Deleting Pri vacy Zones, Sony Camera, C ontinued a. Press the + or – key until the desired character is displayed on the LCD screen, and then press Character Select ( A BC ). The controller sends the character to the KD6/HD6. b. Continue selecting characters and press Character Select ( ABC ) until all the characters ...

  • Honeywell HEGS5001 - page 48

    5.2.13.1 Programming/Editing/Deleting Pri vacy Zones, Sony Camera, C ontinued 12. Press + or – until the character for the desir ed action is displaye d on the LCD and then press Character Select ( A BC ). To save Privacy coordinates , press + or – until S is displayed on the LCD and press Character Select ( A BC ). Refer to the diagram below f ...

  • Honeywell HEGS5001 - page 49

    5.2.13.2 Programming/Editing/Deleti ng Privacy Zones, Hitachi Ca mera To program privacy zo nes in a KD6/HD 6 with a Sony c amera: 1. Press the Dome Menu ( 1. __ _ 3. __ _ ) key. 2. Press + or - until Sector/Priv Menu is displayed. 3. Press Enter ( ). 4. Press + or – until Program is displayed. 5. Press Enter ( ). 6. Press + or - until P is displ ...

  • Honeywell HEGS5001 - page 50

    5.2.13.2 Programming/Editing/Deleting Privacy Zo nes, Hitachi Camera, Conti nued c. Press Enter ( ). The following options are displayed on the monitor: E to Edit the Title Press + or – key until E is displayed on LCD and press Char Select. Repeat step 10. D to Delete Zone Coordinates Press + or – key until D is displayed on LCD and press Char ...

  • Honeywell HEGS5001 - page 51

    5.2.13.3 Changing the Privacy Zone Password 1. Press the Dome Menu ( 1. __ _ 3. __ _ ) key. 2. Press + or – until Sector/Priv Menu is displayed on the LCD. 3. Press Enter ( ). 4. Press + or – until P is displayed on t he LCD and press Char Select . 5. Enter the current password . a. Press the + or – key until the desired character is displaye ...

  • Honeywell HEGS5001 - page 52

    5.2.14 Nightshot Mode The nightshot feature is only available on KD6/HD6 models with th e following cameras: 843216-1011 Sony Color NTSC w/ 4.1-73.8mm, IR 843216-1013 Sony Color PAL w/4.1-7 3.8mm, IR 843216-0984 Hitachi Color NTSC Camera w/3.6- 82.8mm, IR 843216-0985 Hitachi Color PAL Camer a w/3.6-82.8m m, IR To toggle between standard operation a ...

  • Honeywell HEGS5001 - page 53

    SECTION 6: MUX MODE OPERATION HEGS5001 6.1 INTRODUCTION In the MUX mode of operation, the HEGS5001 is cap able of controlling mu ltiplexers, VCRs, and KD6/HD 6 PTZ cameras. Refer to Section 5 for informat ion on controlling the KD6/HD6 PTZ cameras. There are two overlays, English Text versio n and Icon Version, for MUX mode of operation. System Con ...

  • Honeywell HEGS5001 - page 54

    6.1 INTRODUCTION, CONTINUED The initial display after a user logs on the controller is shown below. The operator has control of camera 1 and Spot Monitor 1 (mu ltiplexer 1). Tip: Press + and – to select the next or previous camera. Tip: Press Moni tor ( ) followed by + or - to select the next or previous sp ot monitor. 6.2 SPOT MONITOR OPERATION ...

  • Honeywell HEGS5001 - page 55

    6.2.1 Absolute Mode In absolute mode, the camera number is displayed and selected b y a number in the range 001 to 256. Cameras 001 to 016 are from the first multip lexer, 017 to 0 32 the second, and so on. The multiplexer to be controlled is automatically calculat ed and indicated by the number after SPOT. Ab solute mode is indicated by displaying ...

  • Honeywell HEGS5001 - page 56

    6.3 MULTIPLEXER CONTROL The HEGS5001 controller sends basic commands t o the multiplexer to simulat e pressing the buttons on the front panel of the multiplexer. Refe r to the Multiplexer User Manual for details on the operation of the multiplexer. ICON KEY DESCRIPTION MUX Press once to send a sing le multiplexer command (L ED will flash). Press t ...

  • Honeywell HEGS5001 - page 57

    6.4 VCR CONTROL The HEGS5001 controller sends basic commands t o the VCR. Refer to the VCR User Manual for details on the operation of the VCR. To lock the controller into the VCR mode, press the VCR ( ) button twice. The LED lights to indicate that the controller is now in the VCR mode. Use the joystick and keys 7-14 as described in Section 2.1 to ...

  • Honeywell HEGS5001 - page 58

    Rev. 1.01 48 900.0800 19-Jun-06 Notes: ...

  • Honeywell HEGS5001 - page 59

    SECTION 7: DOWNLOADING NEW FIRMWARE TO THE HEGS5000 7.1 INTRODUCTION New firmware for the HEG S5000 and HEGS5 001 controllers can be downloaded thr ough the RS-232 port. This is d one through a simple wi ndows program called Ultrak Code Server. To download the latest ver sion of the Code Server, visit the down load section o n the Honeywell website ...

  • Honeywell HEGS5001 - page 60

    7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 5. Press . The controller will clear the memory and, when ready to d ownload, will display the message “ Begin Download. ” The HEGS5000 is now waiti ng for data from the PC. 6. From the START bar on your PC, Select Programs → Ultrak → Ultrak Code Server. The following window app ears. ...

  • Honeywell HEGS5001 - page 61

    7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 8. Click on the red dot on the right of the d ialog box to enable the por t. Red Dot Figure 11: Enabling the CommPort If the port is unavailable you will get an “Invalid port number” error message. This is because the port is being used by another device, usually the mouse or a modem. Clic ...

  • Honeywell HEGS5001 - page 62

    7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 10. Click on the Transmit Hex File Icon to bring up the Send Hex File windo w. Note: the hex file is located where you se lected to save the Ultrak Code Server during the download process in Secti on 7.1. Figure 14: Send Hex File Window 11. Double click the CCTV folder and then do uble click o ...

  • Honeywell HEGS5001 - page 63

    7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED 12. Select the latest version of the firmware (e.g. 519686-1980_A_HE GS5000-5001. hex) and click OPEN. The Sending Hex File window displays, indi cating the file being transmitted and the progress of the download . “ Downlo ad Bu sy” appears on the HEGS5000 L CD. Figure 16: Sending Hex Fil ...

  • Honeywell HEGS5001 - page 64

    Rev. 1.01 54 900.0800 19-Jun-06 Notes: ...

  • Honeywell HEGS5001 - page 65

    SECTION 8: TROUBLESHOOTING AND MAINTENANCE 8.1 TROUBLESHOOTING If problems occur at the initial i nstallation phase, verify the unit i s installed correctly and the connectors are seated fully into the inte rconnectin g equipment. Because thi s unit is just one part of an overall system , it may be ne cessary to verify that the other equipment type ...

  • Honeywell HEGS5001 - page 66

    Rev. 1.01 56 900.0800 19-Jun-06 8.3 SERVICING THE CONTROLLER If problems still exist after verifying correct installation and the problem has been isolated to the controller, then it m ust be remo ved for servicing. THERE A RE NO USER- SERVICEABLE PARTS . REFER SERVICING TO QUALIFIED PERSONNEL ON LY. 8.4 PREVENTIVE MAINTENANCE Use of preventive mai ...

  • Honeywell HEGS5001 - page 67

    Rev. 1.01 57 900.0800 19-Jun-06 SECTION 9: SPECIFICATIONS Input Voltage 9-12V dc Power 6W Controls Push-button switches with backlit LCD display Rate-proportional 3-axis joystick Pan/Tilt Functions Pan left, pan right, tilt up, tilt down Zoom Lens Functions Zoom in, Zoom out, Focu s near, Focus far, Iris open, I ris close Control Ports RJ-12 connec ...

  • Honeywell HEGS5001 - page 68

    Honeywell Video Systems (Head Offic e) 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 www.honeywellvideo.com TEL+1-800-796–2288 Honeywell Video Systems No rthern Europe Netwerk 121 1446 TR Purmerend, The Netherlands www.SecurityHouse.nl TEL +31.299.410.200 Honeywell Security Aus tralia Pty Ltd. Unit 5, Riverside Centre, 24-28 River Road W ...

Manufacturer Honeywell Category Video Game Controller

Documents that we receive from a manufacturer of a Honeywell HEGS5001 can be divided into several groups. They are, among others:
- Honeywell technical drawings
- HEGS5001 manuals
- Honeywell product data sheets
- information booklets
- or energy labels Honeywell HEGS5001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honeywell HEGS5001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honeywell HEGS5001, service manual, brief instructions and user manuals Honeywell HEGS5001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honeywell HEGS5001.

Similar manuals

A complete manual for the device Honeywell HEGS5001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honeywell HEGS5001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honeywell HEGS5001.

A complete Honeywell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honeywell HEGS5001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honeywell HEGS5001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honeywell HEGS5001, that we can find in the current document
3. Tips how to use the basic functions of the device Honeywell HEGS5001 - which should help us in our first steps of using Honeywell HEGS5001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honeywell HEGS5001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honeywell HEGS5001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honeywell HEGS5001?

Use the form below

If you did not solve your problem by using a manual Honeywell HEGS5001, ask a question using the form below. If a user had a similar problem with Honeywell HEGS5001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)