English dropdown-ico

Manual Planar 020-1229-00A

103 pages 3.78 mb
Download

Go to site of 103

Summary
  • Planar 020-1229-00A - page 1

    Plan ar UltraRes TM User Manual ...

  • Planar 020-1229-00A - page 2

    Copyright © 14 May 2013 by Planar Systems, Inc. All rights reserved. Cont ents of this publication ma y not be repr oduc ed in any f orm without permission of Planar Systems, I nc. T rademark Credits Windows™ is a trademark of Microsof t Corp . Planar's Big Picture™ is a trademark of Planar Systems , Inc. All other names ar e trademarks o ...

  • Planar 020-1229-00A - page 3

    Copyright © 22 Mar 2013 by Planar Systems, Inc. All rights reserved. Cont ents of this publication ma y not be repr oduc ed in any fo rm without permission of Planar Systems, I nc. T rademark Credits Windows™ is a trademark of Microsof t Corp . Planar's Big Picture™ is a trademark of Planar Systems , Inc. All other names ar e trademarks o ...

  • Planar 020-1229-00A - page 4

    Planar UltraRes User Manual i T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Planar 020-1229-00A - page 5

    Table of Contents ii Planar UltraRes User Manual L CD Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Installing an UltraRes Display on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Planar 020-1229-00A - page 6

    Table of Contents Planar UltraRes User Manual iii Optional Pedestal Mount - Top an d Bottom Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Optional Pedestal Mount - Single and Doub le Sided . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Planar Ultr ...

  • Planar 020-1229-00A - page 7

    Table of Contents iv Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 8

    Planar UltraRes User Manual 1 Introduction Planar UltraRes 4K professional displa y is a family of 84” Ultra HD displays that produce r esolution and pic ture quality not be f ore seen in large fo rmat L CD displays. There ar e three differ e nt off erings: the UR8450-LX, UR8450-MX and the UR8450-3D . Designed specifically f or resolution-rich co ...

  • Planar 020-1229-00A - page 9

    2 Planar UltraRes User Manual Impor t ant Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 F ollow all instructions. 5 Do not use any of the Planar UltraRes products near water . 6 Clean the L CD screens with an L C D screen cleaner or L CD wipes. 7 Do not install near any hea t sources such as radiat ...

  • Planar 020-1229-00A - page 10

    Planar UltraRes User Manual 3 16 Slight pressur e on the L C D will cause distor tion of th e image. Heavier pr essure will cause permanent damage. Planar UltraRes c onfigurations should be mounted where view ers cannot touch the sc reen or insert small objec ts in the openings that will create hazar ds by contac ting bare conductive parts. Caut io ...

  • Planar 020-1229-00A - page 11

    4 Planar UltraRes User Manual European Union Disposal Inf orm ation English ■ Disposal of old Electrical & Electronic Equipment (Applicable throughout the European Union and other European countries with separate collection programs) This symbol found on your product or on its packaging, indicates that this product should not be treated as ho ...

  • Planar 020-1229-00A - page 12

    Recommended Usage Planar UltraRes User Manual 5 Recommended Usage In order to get the most out of your L CD modules, use the f ollowing recommended guidelines to optimize the display . Burn-In V ersus T emporar y Im age Retention Burn-in causes the screen to retain an image essentially for ever , with little or no way to correct the problem. Under ...

  • Planar 020-1229-00A - page 13

    Recommended Usage 6 Planar UltraRes User Manual Norm al Use Therm al Guidelines Normal use of the L CD module is defined as operating in th e open air to prevent heat buildup , and without direct or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight that can cause the modules to experience high oper ating temperature ...

  • Planar 020-1229-00A - page 14

    Basic Concept of Planar UltraRes Display Planar UltraRes User Manual 7 Basic Concept of Plan ar UltraRes Display The Planar UltraRes display u ses f o ur separate outputs that f eed into the 84” display as one image. Y ou can use any combin a t ion of HDMI, DisplayP or t or DVI. There ar e two main modes of oper ation for the Ultr aRes Display: ? ...

  • Planar 020-1229-00A - page 15

    Using the Remote Control 8 Planar UltraRes User Manual Using the Remote Control The UltraRes r emote control can be used f or a variety of fu nc tions, including turning the display on and off and assigning individual inputs . Tu r n d i s p l a y on/off Select single or multiple input connec tions Select individua l inputs ...

  • Planar 020-1229-00A - page 16

    Turning Power On/Off Planar UltraRes User Manual 9 T urning P o wer On/Off There ar e several ways to turn th e pow er on and off : • Using the On/Off buttons on the remote contr ol. See "Using the Remote Contr o l" on page 8 f or more inf o rmation. • Using the P ower On/P ower Off buttons in the UltraRes Contr ol software tool. See ...

  • Planar 020-1229-00A - page 17

    Input Setup 10 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 18

    Planar UltraRes User Manual 11 Inst alling a Plan ar UltraRes Display This section explains how to install a Planar UltraRes display . W e suggest that you read this entire section bef ore you attempt t o install a display . Bef ore Y ou Begin Make sure y ou have all the it ems in the f ollowing lists bef ore y ou begin unpacking and installing you ...

  • Planar 020-1229-00A - page 19

    Supported Graphics Cards 12 Planar UltraRes User Manual Suppor ted Graphics Cards UltraRes suppor ts a variety of graphics cards fr om leading manufacturers, such as Nvdia and AMD . I n general, y ou s hould be looking for graphics car ds that have the follo wing fea tures: • Can output 3840 x 2160 at 24 Hz or 30 Hz over a single Displa yPort of ...

  • Planar 020-1229-00A - page 20

    Powering On/Off Planar UltraR es Displays Planar UltraRes User Manual 13 P o wering On/Off Planar UltraRes Displays There ar e several diff erent ways to turn on or off the Plan ar UltraRes Display: • Using the On/Off buttons on the remote contr ol. See "Using the Remote Contr o l" on page 8 f or more inf o rmation. • Using the P ower ...

  • Planar 020-1229-00A - page 21

    Powering On/Off Planar UltraRes Displays 14 Planar UltraRes User Manual Plan ar UltraRes in St andby Mode If you are unsur e about whethe r or not the display is on b ut in standby mode , look for the small Standby LED . If it is off , you will not see the LED . If it is on but in Standby mode, y ou will see a blue LED . As the display star ts, the ...

  • Planar 020-1229-00A - page 22

    Powering On/Off Planar UltraR es Displays Planar UltraRes User Manual 15 If an image is present on th e current input, it will be display ed on the UltraRes display . Ot herwise, you will see a blank screen color (the default is black). ...

  • Planar 020-1229-00A - page 23

    Powering On/Off Planar UltraRes Displays 16 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 24

    Unpacking and Checking Accessories Planar UltraRes User Manual 17 Unpacking and Checking Accessories LCD Module Bo x The follo wing items are inc luded in the L CD module box. Pa rt Description Number Picture L CD module One per box. 1 LC D m o u n t s (optional) I f o r d er e d , t hi s w i l l b e i n s i d e a separate box inside the L CD box. ...

  • Planar 020-1229-00A - page 25

    Unpacking and Checking Accessories 18 Planar UltraRes User Manual Kick st and bracket Mounts to the displa y when Planar mounts are purchased. 1 M4 x 8 Pa n h ea d screws Used to mount the kickstand bracket. 4 Pa rt Description Number Picture ...

  • Planar 020-1229-00A - page 26

    Unpacking and Checking Accessories Planar UltraRes User Manual 19 Accessor y Kit The follo wing items are inc luded in the acc essor y kit. Par t De s cr ip ti on Number Included Pic tu re AC power co rd Power cord. 1 IR sensor Used to r eceive signals fr om the remote control. 1 Double -sided tape Used to help in mounting the IR sensor module. 2 U ...

  • Planar 020-1229-00A - page 27

    Unpacking and Checking Accessories 20 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 28

    Planar UltraRes User Manual 21 LCD Inst allation Befor e installation, keep the follo wing points in mind: • These displays ar e heavy . Make sure that you ha ve an adequate studs to suppor t the we ight of each display if installing on a wall . • The UltraRes must be inst alled on a flat sur face . • If you order ed the optional wall moun ts ...

  • Planar 020-1229-00A - page 29

    Installing an UltraRes Display on a Wall 22 Planar UltraRes User Manual Inst alling an UltraRes Display on a W all Caut ion : For what ever structure is used t o mount the display , be sure tha t it is sufficiently engineered to handle the weight of the display . Also be sure to purchase the correct hardware needed to suppor t the display mounted t ...

  • Planar 020-1229-00A - page 30

    Installing an UltraRes Display on a Wall Planar UltraRes User Manual 23 3 Use the provided template t o determine the center points of the wall mounts. The “ V ” notches are labeled “L ” for a landscape display or “P” for a portrait display . Use the appropriate “ V” notch to align wi th the horizontal line drawn in the previous ste ...

  • Planar 020-1229-00A - page 31

    Installing an UltraRes Display on a Wall 24 Planar UltraRes User Manual 4 In the hole marked “ T op ” on the template, mark the center of the hole on the wall. Note: If you ar e installing a landscape display and the template is too long, y ou can break the temp late at the n otch l abel ed “P . ” 5 Let the templat e hang vertically so it i ...

  • Planar 020-1229-00A - page 32

    Installing an UltraRes Display on a Wall Planar UltraRes User Manual 25 8 Line up the middle hole of the top wall mount with the screw hole drilled fr om the template. Note: This pi cture shows moun ts for a landscape installa tion. 9 Tighten the screw into the mount. 10 Use a level to make sur e the mount is level . 11 Then install additional scre ...

  • Planar 020-1229-00A - page 33

    Installing an UltraRes Display on a Wall 26 Planar UltraRes User Manual 13 Install the k ickstand bracket to the back of the display using f our M4 x 8 Panhead screws. Landscape holes for kickstand brack et installation Portrait k ickstand installed on display ...

  • Planar 020-1229-00A - page 34

    Installing an UltraRes Display on a Wall Planar UltraRes User Manual 27 14 Using two people , carefully hang the back display onto the top wall mount bracket using the square br ack ets on the back of the display . Caut ion : Be sure that these ar e securely hung , as the top of the wall mou nt will hold most of the weight of the display . ...

  • Planar 020-1229-00A - page 35

    Installing an UltraRes Display on a Wall 28 Planar UltraRes User Manual 15 On the bottom wall mount, th ere is locking hardware in the bottom c orners of the mount. Push the har dware up and fing er tighten the captive screws on the bottom t o secure the di spla y to the wall . ...

  • Planar 020-1229-00A - page 36

    Installing an UltraRes Display on a Wall Planar UltraRes User Manual 29 Using the Kickst and Bracket The kickstand bracket is used for ser vice mo de, without having to r emove the display from the wall. U se the follo wing instructions to put the display in service mode. 1 Loosen the captiv e lock ing screws on both sides of the bottom mount. 2 Pu ...

  • Planar 020-1229-00A - page 37

    Connections 30 Planar UltraRes User Manual Conn ections In order to get your UltraRes display up and running , you need to make thr ee main connections: AC power to the displa y , th e wired IR module and your sour ces. Conn ecting AC P o wer Using the supplied A C power cor d, connect one end to a grou nded outlet and the other to the AC pow er in ...

  • Planar 020-1229-00A - page 38

    Connections Planar UltraRes User Manual 31 Conn ecting Sources The graphics car d that you install on y our main PC will determine what outputs will be plugged into the Planar UltraRes displa y. F or example, some g raphics cards hav e two HDMI outputs and two DisplayP or t outp uts. An y combination of these outputs is fine. Below is a visual exam ...

  • Planar 020-1229-00A - page 39

    Connections 32 Planar UltraRes User Manual Setting Up UltraRes Using Multiple Inputs Y ou will have a computer that c ontains four video outputs . All four outputs will then be connected to the UltraRes display . The f ollowing formats are suppor ted f or multiple inputs: • (4x) DisplayP or t or HDMI/DVI 1080p @ 24/50/60Hz • PC with DisplayP or ...

  • Planar 020-1229-00A - page 40

    Connections Planar UltraRes User Manual 33 Below are two examples of setu ps in UltraRes Control software that ar e acceptable . ...

  • Planar 020-1229-00A - page 41

    Connections 34 Planar UltraRes User Manual Setting Up UltraRes Using Single Inputs Instead of having one centr a l device into which you ca n c onnect and define your source inputs , single source setup requir es connecting from a single-headed source to the display . F or example, connecting one input directly from a Blu-ray player into the 84” ...

  • Planar 020-1229-00A - page 42

    Connections Planar UltraRes User Manual 35 Using the Remote Control The UltraRes r emote control has individual inputs that can be selected. So if this UltraRes input is connected to HDMI 2, press the HDMI 2 b utton on the remote control. ...

  • Planar 020-1229-00A - page 43

    Connections 36 Planar UltraRes User Manual Using the UltraRes Control Software On the Source tab , select the input that is connec ted to the U ltraRes display . F or example, if this UltraRes input is connected to HDMI 2, select the HDMI 2 radio button in the Input Source section on the lef t. ...

  • Planar 020-1229-00A - page 44

    Planar UltraRes User Manual 37 Inst alling the UltraRes Control Software The UltraRes C ontrol software is used as your primar y t ool for display setup . Use the follo wing instructions to install the UltraRes Control software. 1 Save the Ultr aRes Control.ex e program to your c omputer’ s hard driv e. 2 Double click the .exe file to open the in ...

  • Planar 020-1229-00A - page 45

    38 Planar UltraRes User Manual 3 Click Next to contin ue. 4 If you want to save the U ltraRes Contr ol files to a dif ferent location, click the Bro wse button and save to the folder of y our choice. 5 If you want to see how much space is on your har d drive, click the Disk Cost... button to review storage capacity . 6 Do one of the following: • ...

  • Planar 020-1229-00A - page 46

    Planar UltraRes User Manual 39 8 Click Next on the next window to continue. 9 As the installation is oc curring , you will see the status bar f or up to a couple of minutes. ...

  • Planar 020-1229-00A - page 47

    Installing USB Drivers 40 Planar UltraRes User Manual 10 Once the installation is c omplete, click Close to close the program. Inst alling USB Drivers When you install the UltraR es Contr ol soft ware , it wi ll automatically install the necessary USB dr ivers n eeded for c ommuni cation between your comput er and to the UltraRes display . Y ou onl ...

  • Planar 020-1229-00A - page 48

    Installing USB Drivers Planar UltraRes User Manual 41 3 If the USB driver installati on is successful, you will see a message similar to the example below . Y ou are now done with the USB driver installation pr ocess. ...

  • Planar 020-1229-00A - page 49

    Installing USB Drivers 42 Planar UltraRes User Manual Using the UltraRes Control Software When you first open the UltraRes Control software, you will see a windo w similar to the following . Notice that until you connect the inputs to the display , the “Status” at the top of the window wi ll sho w “Disconnected. ” 1 Connect from the PC on w ...

  • Planar 020-1229-00A - page 50

    Installing USB Drivers Planar UltraRes User Manual 43 3 The tool will then attempt to auto detect any inputs that are alr eady connec ted . I f one is detected, the follo wing window ap pears with information already filled in. If no inputs are auto- detected, you will see a window similar to the following . Notice all fields are gra yed out and ca ...

  • Planar 020-1229-00A - page 51

    Setting Up Sources 44 Planar UltraRes User Manual 4 If the connection is successf ul, the “Status ” at the top of the window will show “C onnec ted. ” Note that all tabs are no w accessible and can now be changed if needed. Setting Up Sources This info rmation is cov ered earlier in th e manual. Please see "S etting Up UltraRes Using M ...

  • Planar 020-1229-00A - page 52

    Auto Power Off Timer Planar UltraRes User Manual 45 Auto P o wer Off T imer If you want th e power to aut omatically turn off if ther e is no incoming source f or a certain amount of time, use the AUTO POWER OFF TIMER slider on the Settings tab and select bet ween 1-60 seconds . St andby Mode This mode allows y ou to choose between a low pow er set ...

  • Planar 020-1229-00A - page 53

    Changing Backlight Intensity 46 Planar UltraRes User Manual Changing Backlight Intensity T o change the brightness of the display , use the BACKLIGHT slider on the Display tab . If you want a brighter display , mov e the slider towards a higher number . I f you want to conser ve po wer and increase backlight life, mov e the slider towards a lowe r ...

  • Planar 020-1229-00A - page 54

    Upgrading Firmware Planar UltraRes User Manual 47 Upgrading F irmware Upgrading software can only be done th rough the UltraRes C ontrol software. Note: F ir mwar e upgrades can only be done over a USB connection. 1 Select the File menu bar and then Upgrade F irmw are . ...

  • Planar 020-1229-00A - page 55

    Upgrading Firmware 48 Planar UltraRes User Manual 2 A file called 4K.xml will be par t of the release pa ckage. Navigate to this section and click Open to begin the upgrade process. Note: The upgrade can be initiated fr om ON or standby mode . ...

  • Planar 020-1229-00A - page 56

    Upgrading Firmware Planar UltraRes User Manual 49 3 The upgrade proc ess will take about 40 minutes . Be sure you are prepared f or this amount of time befor e yo u initiate the upgrade pr ocess. 4 The upgrade proc ess status bar will show where y ou are in the upgrade process as the upgrade proc eeds. 5 When the upg rade is complete , you wi ll se ...

  • Planar 020-1229-00A - page 57

    Error Codes 50 Planar UltraRes User Manual Error Codes T o see the last 50 errors that hav e occurr ed , selec t the Error L og tab in the UltraRes Contr ol soft ware , as shown below . F or a c omplete list of the er ror codes, see "Err or Codes in the UltraRes C ont rol Software" on page 85. ...

  • Planar 020-1229-00A - page 58

    Planar UltraRes User Manual 51 UltraRes Dimensions Display Dimensions - F ront and Side Vie ws                    ...

  • Planar 020-1229-00A - page 59

    Display Dimensions - Rear View 52 Planar UltraRes User Manual Display Dimensions - Rear Vie w                 ;0;02817+2/(6 6(59,&(3$1(/ &$37,9(6&5(:6 6(59,&(3$1(/ ...

  • Planar 020-1229-00A - page 60

    Landscape Wall Mounts - Front View Planar UltraRes User Manual 53 Landscape W all Mounts - F ront Vie w                          ? ...

  • Planar 020-1229-00A - page 61

    Landscape Wall Mou nts - Sides Views 54 Planar UltraRes User Manual Landscape W all Mounts - Sides Views           0,18080 &(,/,1* :$//      Installed position Ser vice position - with kicks tand supporti ng dis ...

  • Planar 020-1229-00A - page 62

    Portrait Wall Mounts - Front View Planar UltraRes User Manual 55 P or trait W all Mounts - F ront Vie w                          ? ...

  • Planar 020-1229-00A - page 63

    Portrait Wall Mounts - Sides Views 56 Planar UltraRes User Manual P or trait W all Mounts - Sides Vie ws           0,1,080 &(,/,1* :$//      Installed position Ser vice position - with kickstand supporting disp lay ...

  • Planar 020-1229-00A - page 64

    Optional Pedestal Mount - Front View Planar UltraRes User Manual 57 Option al P edest al Mount - F ront View Note: This view sho ws the pedestal without the display mount ed on it.                  ...

  • Planar 020-1229-00A - page 65

    Optional Pedestal Mount - Top and Bottom Views 58 Planar UltraRes User Manual Option al P edest al Mount - T op and Bottom Vie ws                     ;  ...

  • Planar 020-1229-00A - page 66

    Optional Pedestal Mount - Single and Double Sid ed Planar UltraRes User Manual 59 Option al P edest al Mount - Single and Dou ble Sided             5($575,0 6+((76,1*/( 3('(67$/21/< 6,1*/(6,'(' 3('(67$/ 81,7 ...

  • Planar 020-1229-00A - page 67

    Optional Pedestal Mo unt - Single and Double Sided 60 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 68

    Planar UltraRes Remote Monitoring Software Planar UltraRes User Manual 61 Plan ar UltraRes Remote Monitoring Software Planar UltraRes Remote M onitoring is soft ware that displays inf or mation about the display via a web br owser . I t is used prima rily f or monitoring, r e porting and some contr ol (f or example, manually po wering the displa ys ...

  • Planar 020-1229-00A - page 69

    Planar UltraRes Remote Monitoring Software 62 Planar UltraRes User Manual Unit St atus The Unit Status page shows a list of the differ ent sy stem settings for the displa y , including powe r , signal f ormat and which so urces are connected with which inputs. It also shows all current firm ware information, the displa y ID and the serial number of ...

  • Planar 020-1229-00A - page 70

    Planar UltraRes Remote Monitoring Software Planar UltraRes User Manual 63 P o wer On/Off P ower On/O ff buttons contr ol the LED power , not the AC power . Y ou cannot control AC pow er through Planar Ul traRes Remote Monitoring . This section has four options for which yo u can schedule an auto matic power on/off . The options are: no aut omatic p ...

  • Planar 020-1229-00A - page 71

    Planar UltraRes Remote Monitoring Software 64 Planar UltraRes User Manual Source Setup The Source Setup page allows you to per f orm the same tasks th at you can using the UltraRes Control software: select single or multiple input model, select an input source f or each input in single input mode , and diff erent options for selecting inputs in mul ...

  • Planar 020-1229-00A - page 72

    Planar UltraRes Remote Monitoring Software Planar UltraRes User Manual 65 Adv anced Setup The Advanc ed Setup page allo ws you to per form man y of the same tasks that you can on the UltraRes Control software prog r am, including selecting the power mode that works best f or your displa y, which includes low pow e r or fast startup. Y ou can also s ...

  • Planar 020-1229-00A - page 73

    Planar UltraRes Remote Monitoring Software 66 Planar UltraRes User Manual Admin Setup The Admin Setup page contains four sub -pages: Network Setup, Da te and Time , Acc ess Control and Software Setup. These are described in the f ollowing pages. ...

  • Planar 020-1229-00A - page 74

    Planar UltraRes Remote Monitoring Software Planar UltraRes User Manual 67 Network Setup This page allows y ou to configure n etwork settings and wheth er or not you use DHCP . 1 In the Hostna me bo x it now says P lanar . Change this name to something more appropriat e. T his will be th e name for this par ticular ser ver . The hostname is limited ...

  • Planar 020-1229-00A - page 75

    Planar UltraRes Remote Monitoring Software 68 Planar UltraRes User Manual b Y ou do no need to fill in anything under the Sta tic (non-DHCP) Networ k Settings sec tion. Howev er , if you do, th ese settings will be used in the event that the DHCP attempts to time out. c Go to step 6 . 5 Under the DHCP section, choose No , use static settings . a In ...

  • Planar 020-1229-00A - page 76

    Planar UltraRes Remote Monitoring Software Planar UltraRes User Manual 69 Date and T ime Use this page to change date and time information as needed . 1 Set the date and time manually in the bo x under the Manual Date and Time section. The date format is ver y exac t. F ill in the current da te and time using exactly the f ormat sho wn on the page. ...

  • Planar 020-1229-00A - page 77

    Planar UltraRes Remote Monitoring Software 70 Planar UltraRes User Manual Access Control The Acc ess Contr o l page allows you t o set pa rameters needed to access the web , the Remote Monitoring net work, RS232 commands , as w ell as selec t the correct baud rate. ...

  • Planar 020-1229-00A - page 78

    Planar UltraRes Remote Monitoring Software Planar UltraRes User Manual 71 Software Setup (Upgrading Network F irmware) This page allow s you to up load the latest Ultr aRes Remo te Monitoring soft ware . Y o u can also reset all of y our settings to the factor y defaults, as w ell as choose the web page link that is associated with the Plan ar logo ...

  • Planar 020-1229-00A - page 79

    Planar UltraRes Remote Monitoring Software 72 Planar UltraRes User Manual Monitoring software may not conf igure t o the same net work address after the system rebo ots. 4 When you click Reset ALL to F actor y Default , you r eceive the Confirm F ac tory Reset page. Click OK, Reset to F actor y Defaults and Reboot if you are sur e you want to reset ...

  • Planar 020-1229-00A - page 80

    RS232 Communication Planar UltraRes User Manual 73 RS232 Comm unication RS232 control is not nec essar y for operatio n, but is a conv enie nt way to control displays fr om a computer a t a distance . If yo ur installation will not use RS232 control, skip this sec tion. Most things you can do with the r emote, y ou can do with RS232 commands. P lus ...

  • Planar 020-1229-00A - page 81

    RS232 Communication 74 Planar UltraRes User Manual Setting Up Single Inputs Y ou can set up single inputs using RS232 commands. As is typical with using RS232 commands, y ou can pull up a basic program such as T era T erm to send commands. Below is an small example. ...

  • Planar 020-1229-00A - page 82

    RS232 Commands Planar UltraRes User Manual 75 RS232 Comm ands The RS232 connection must us e the following settings: • 19200 baud rate • 8 data bits • 1 stop bit • No parity bit • No HW (RTS/C TS) or SW (X ON/XOFF) flow c ontrol Comm and F orm at Commands sent fr om the initiator to the fo llower must ha ve th e following f ormat: (www:xy ...

  • Planar 020-1229-00A - page 83

    Response Format 76 Planar UltraRes User Manual Response F orm at Responses sent from the fo llower to the in itiator shall have th e f ollowing format: (u;www:x=z) [CR] Where: • ‘(‘ and ‘)’ indicate the start and end of the command data. If these characters are present, the CLI pr ocessor sh all assume that “valid” CL I data is presen ...

  • Planar 020-1229-00A - page 84

    Response Format Planar UltraRes User Manual 77 Comm and/Response Examples The follo wing section gives examp les of commands and their responses: Example: Power query when unit is powered on Command: (PWR?) [CR] Response: (0;PWR=1) [CR] Example: Set power to 0 (off) Command: (PWR=0) [CR] Response: (0;PWR=0) [CR] Example: Increment brightness from 2 ...

  • Planar 020-1229-00A - page 85

    Supported UltraRes 4K Comman ds 78 Planar UltraRes User Manual Suppor ted UltraRes 4K Comm ands The follo wing section lists the commands that are curr ently suppor t on the UltraRes display . Setting Command  Code Read/ Write Inc/Dec Min  Valu e Max  Value Str ing? Password  Protected? Notes Aut o Po wer Off Enable APE R/W No 0 1 No No ...

  • Planar 020-1229-00A - page 86

    Supported UltraR es 4K Commands Planar UltraRes User Manual 79 Setting Command  Code Read/ Write Inc/Dec Min  Valu e Max  Value Str ing? Password  Protected? Notes Info rmati on FPG A 1 Ver s i on IF1 R No N/A N/A Y es No Info rmati on FPG A 2 Ver s i on IF2 R No N/A N/A Y es No Info rmati on FPG A 3 Ver s i on IF3 R No N/A N/A Y es No ...

  • Planar 020-1229-00A - page 87

    Supported UltraRes 4K Comman ds 80 Planar UltraRes User Manual Setting Command  Code Read/ Write Inc/Dec Min  Valu e Max  Value Str ing? Password  Protected? Notes Multiple Input 3 MI3 R/W No 0 2 No No 0 = Auto 1 = DisplayPort 3 2 = HDMI 3 Multiple Input 4 MI4 R/W No 0 2 No No 0 = Auto 1 = DisplayPort 4 2 = HDMI 4 Pow er PW R R /W N o 0 ...

  • Planar 020-1229-00A - page 88

    Planar UltraRes User Manual 81 Specif ications LCD Module Specif ications Specification UltraRes Display Dimensions in/lbs mm/kg Widt h 75.5” 1918.7mm Height 43.7” 1110.7mm Diagonal overall 87.28” 2217mm Depth - without mount 3.05” 77.5mm Depth - with m ount 3.17” 80.5mm We ig h t LC D o nl y 180lbs 82kg Landscape mounts 32lbs 14.5kg Port ...

  • Planar 020-1229-00A - page 89

    82 Planar UltraRes User Manual Col or ga mut 72% NTSC 100% REC709 Red (x,y) Green (x,y) Blue (x,y) White (x,y) 0.645, 0.335 0.300, 0.620 0.150, 0.060 0.279, 0.292 Native c olor temperature 10,000K Number of colors 16.7M Native r esolution 3840 x 2160 LCD Optical Specif ications (Continued) Specification Maximum Minimum T ypical Environment al Speci ...

  • Planar 020-1229-00A - page 90

    Signal Compatibility Planar UltraRes User Manual 83 Sign al Compatibility The UltraRes display supports the following video modes . Compatible Video Sources Signa l T ype Resolution F rame Rat e (Hz) Line Ra te (kHz) Pix el Rat e (MHz) PC 960 x 2160 60 135.000 148.500 HD T V 1080p 24 27.000 74.2 50 1080p 25 28.125 74.250 1080p 30 33.750 74.250 1080 ...

  • Planar 020-1229-00A - page 91

    Signal Compatibility 84 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 92

    Error Codes in the UltraRes Control Software Planar UltraRes User Manual 85 T rou bleshooting During Inst allation This section includes troubleshooting in formation about diff erent issues y ou may encounter during the installation proc ess or af ter your display has been running for some time. If you ar e not able to solve y o ur issue in this se ...

  • Planar 020-1229-00A - page 93

    Error Codes in the Ultr aRes Control Software 86 Planar UltraRes User Manual Error C ode Meaning Display Behavior and Solution AC Pow er Sup p ly 1 F ail ure One of the two A C power supplies is not wor kin g properly . The backlight will be dimmed to a maximum setting of 10, which is necessar y in order to r educe power c onsumption. Solution : Re ...

  • Planar 020-1229-00A - page 94

    Symptoms, Possible Ca uses and Solutions Planar UltraRes User Manual 87 Symptoms, P ossible Causes and Solutions Below are diff erent symptoms that you mi ght encounter as y ou install your UltraRes display . F irst look at the di ffer ent symptoms to see if yo u can find y our issue. And then look at the possible cause and tr y the suggested solut ...

  • Planar 020-1229-00A - page 95

    Symptoms, Possible Causes and Solutions 88 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 96

    Planar UltraRes User Manual 89 Accessing Plan ar’ s T echnical Suppor t W ebsite 1 Go to www .p lana rpartne rs. com 2 Once you en ter your login and passwor d, you can access downloadable utility sof tware, new firmwar e, user manuals, and service manuals. Do wnloading Addition al Document ation and F irmware Some of the other documents for the ...

  • Planar 020-1229-00A - page 97

    Downloading Utility Software 90 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 98

    Planar UltraRes User Manual 91 Regulator y Inf orm ation Manufacturer's Name: Planar Systems, Inc. Manufacturer's Address: 1195 NW Compton Drive Beaver ton, OR 97006 Declares that the products Mode l Numbers: Planar UR8450-3D , UR8450-LX, UR8450-MX Conforms with the provisions of : Council Directive 2004/108/EC on El ectromagnetic Compati ...

  • Planar 020-1229-00A - page 99

    92 Planar UltraRes User Manual ...

  • Planar 020-1229-00A - page 100

    Planar UltraRes User Manual i Inde x A AC p owe r connecting, 30 access control in Remote Monitoring, 70 accessories accessor y ki t contents, 19 checking, 17 checking and unpack ing, 17 electronics box contents, 17 L CD module box contents, 17 admin setup in Remote Monitoring, 66 ambient operating temper ature, 82 aspect ratio landscape, 81 por tr ...

  • Planar 020-1229-00A - page 101

    Index Planar UltraRes User Manual ii F fast startup power standby mode, 45 firmware upgrading, 47 frame delay changing, 46 frame tearing fixing, 46 H humidity, 82 I input setup, 9 inputs suppor ted formats, 9 installation befor e you build, 21 of display on a wall, 22 of L CD, 21 of video wall, 1 1 planning, 11 space requir ements, 11 UltraRes Cont ...

  • Planar 020-1229-00A - page 102

    Index iii Planar Ul traRes User Manual pedestal mount, 57 using the kickstand bracket, 29 orientation of L CD module, 81 P pedestal mount front view, 57 Planar UltraRes, 1 Remote Mo nitoring, 61 planning your ins tallation, 11 portrait wall moun ts front view, 55, 56 power off auto timer via UltraRes Contr ol, 45 off display via UltraRes Control, 1 ...

  • Planar 020-1229-00A - page 103

    Index Planar UltraRes User Manual iv low pow er, 45 via UltraRes Control, 45 supported f ormats for multiple inputs, 32 T temp erature operating, 82 requirements for normal use, 6 temporary image retention avoidin g, 5 definition, 5 thermal guidelines, 6 time changing in Remo te Monitoring, 6 9 TIR see temporary image retention tools/equipment list ...

Manufacturer Planar Category Digital Camera

Documents that we receive from a manufacturer of a Planar 020-1229-00A can be divided into several groups. They are, among others:
- Planar technical drawings
- 020-1229-00A manuals
- Planar product data sheets
- information booklets
- or energy labels Planar 020-1229-00A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planar 020-1229-00A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planar 020-1229-00A, service manual, brief instructions and user manuals Planar 020-1229-00A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planar 020-1229-00A.

Similar manuals

A complete manual for the device Planar 020-1229-00A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planar 020-1229-00A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planar 020-1229-00A.

A complete Planar manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planar 020-1229-00A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planar 020-1229-00A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planar 020-1229-00A, that we can find in the current document
3. Tips how to use the basic functions of the device Planar 020-1229-00A - which should help us in our first steps of using Planar 020-1229-00A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planar 020-1229-00A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planar 020-1229-00A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planar 020-1229-00A?

Use the form below

If you did not solve your problem by using a manual Planar 020-1229-00A, ask a question using the form below. If a user had a similar problem with Planar 020-1229-00A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)