English dropdown-ico

Manual Onkyo AVX-390

56 pages Not applicable
Download

Go to site of 56

Summary
  • Onkyo AVX-390 - page 1

    AV Receiver HT-R390 HT-R290 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughl y before making connections and plugg ing in the unit. Following th e instructions in this manual will enable you to obtain opti mum performance and listening enjoyment from your new AV Receiver. Please retain th is manual ...

  • Onkyo AVX-390 - page 2

    2 En Introduction Important Safety Instructions 1. Read these ins tructions. 2. Keep these instruct ions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. In stall in accordance wit h the manufact urer’s instructions. 8. Do not instal ...

  • Onkyo AVX-390 - page 3

    3 En Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted ma terial is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot tu rn o n the unit, contact your Onkyo dealer. 3. Care —Occasionally you should dust the unit a ...

  • Onkyo AVX-390 - page 4

    4 En For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead ar e coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not cor ...

  • Onkyo AVX-390 - page 5

    5 En Contents Important Safety Instruction s ......................................... 2 Precautions ................................................................ ....... 3 Supplied Accessories ...................................................... 4 Features ............................................................................ 6 Front &a ...

  • Onkyo AVX-390 - page 6

    6 En Features Amplifier • 110 Watts/Channel @ 6 ohms • 100 Watts/Channel @ 6 ohms (IEC) • 120 Watts/Channel @ 6 ohms (JEITA) • Optimum Gain Volume Circuitry • H.C.P.S. (High Current Power Supply) Massive High Power Transfo rmer Processing • HDMI (Audio Return Chan nel, 3D, DeepColor, x.v.Color *1 , Lip Sync, DTS *2 -HD Master Audio, DTS ...

  • Onkyo AVX-390 - page 7

    7 En Front & Rear Panels The page numbers in pa rentheses show where you can find th e main explanation for each item. a 8 ON/STANDBY button ( 17 ) b HDMI THRU indicator ( 35 ) c SPEAKERS A and B buttons ( 24 ) d Remote control sensor ( 4 ) e LISTENING MO DE buttons ( 21 ) f Display ( 8 ) g DIMMER button (North American and Brazilian models) ( ...

  • Onkyo AVX-390 - page 8

    8 En For detailed information , se e the pages in parentheses. a A and B speaker indicators ( 24 ) b Audio input indicators c Listening mode and fo rmat indi cators ( 21 , 25 ) d Audyssey indicators ( 32 ) e Tuning ind icators ( 18 ) f RDS indicator (excluding North American and Brazilian models) ( 19 ) g SLEEP indicator ( 24 , 34 ) h MUTING indica ...

  • Onkyo AVX-390 - page 9

    9 En Remote Controller For detailed informat ion, se e the pages in parentheses. a 9 ON/STANDBY button ( 17 ) b REMOTE MODE/INPUT SELECTOR buttons ( 18 , 41 to 42 ) c TONE and Tone Level buttons ( 36 ) d SP A/B button ( 24 ) e Arrow q / w / e / r and ENTER buttons f SETUP button ( 27 ) g LISTENING MODE buttons ( 21 ) h DIMMER button ( 25 ) i DISPLA ...

  • Onkyo AVX-390 - page 10

    10 En Connections Connecting the AV Receiver Connecting the Speaker Cables The following illustration shows wh ich speaker should be connec ted to each pair of terminals. ■ Using a Passive Subwoofer . To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various p ...

  • Onkyo AVX-390 - page 11

    11 En Speaker Configura tion The following table indicate s the channels you sh ould use depending on the number of speakers that you have. No matter how many speake rs you use, a passive subwoofer is recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speak er settings manual ly ( ...

  • Onkyo AVX-390 - page 12

    12 En Connected image with AV components • Before making any AV connections, read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed and double-check ed all AV connections. • Push plugs in all the way to make good connect ions (loose connections can cause noise or malfunctions). • To prev ...

  • Onkyo AVX-390 - page 13

    13 En Connect your components to the appropriate jacks. The default input assi gnments are shown below. ✔ : Assignment can be changed ( ➔ page 28 ). See also: • “Connection Tips and Video Signal Path” ( ➔ page 48 ) • “About HDMI” ( ➔ page 49 ) • “Using an RIHD-compati ble TV, Player, or Recorder” ( ➔ page 50 ) ■ Audio ...

  • Onkyo AVX-390 - page 14

    14 En Connect your components to the appropr iate jack s. The default input assi gnments are shown below. ✔ : Assignment can be changed ( ➔ page 28 ). *1 Connect a turntable (MM) that has a phono pr eamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially available phono preamp. If your turntable has a moving coil ( ...

  • Onkyo AVX-390 - page 15

    15 En With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , if the AV receiver is on Standby, it will automatically turn on and sele ct that component as the input source. ■ Direct Change When playback is started on a component connected via u ...

  • Onkyo AVX-390 - page 16

    16 En This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so yo u must connect the antenna to use the tuner. Note • Once your AV receiver is rea dy for use, yo u’ll need to tune into a radio station and position the antenna to a ...

  • Onkyo AVX-390 - page 17

    17 En Turning On & Basi c Operations Turning On/Off the AV Receiver Tip • See “Auto Standby” about a power management setting ( ➔ page 34 ). Turning On 1 Press 8 ON/STANDBY on the front panel. or Press RECEIVER followed by 9 ON/STANDBY on the remote controller. The AV receive r comes on, the display lights. Turning Off 1 Press 8 ON/STAN ...

  • Onkyo AVX-390 - page 18

    18 En Playback ■ Operating wi th the remote controller ■ Operating on the AV receiver Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favor ite st ations as presets for quick selection. You can change the frequency steps ( ➔ page 34 ). Tuning into Radio St ations ■ Auto tuning mode The on-s ...

  • Onkyo AVX-390 - page 19

    19 En ■ Manual tuning mode In manual tuning mode, FM stations will be in mono. ■ Tuning into stati ons by frequency You can tune into AM and FM stations directly by entering the appropriate frequency. Presetting AM/F M Stations You can store a combination of up to 40 of your favorite AM/FM radio stations as presets. ■ Selecting Presets ■ De ...

  • Onkyo AVX-390 - page 20

    20 En ■ Displaying Radio Te xt (RT) ■ Finding Stations by Type (PTY) You can search for ra dio stations by type. ■ Listening to Traffic News (TP) You can search for stations that broadcast traffic news. RDS progra m types (PTY ) 1 Press RT/PTY/TP once. The RT information scro lls across the display. Note • The message “ Waiting ” may ap ...

  • Onkyo AVX-390 - page 21

    21 En Using Basic Functions Selecting L istening Modes See “Listening Modes” for detailed in formation about the listening modes ( ➔ page 2 2 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the listening modes intended for use with musi ...

  • Onkyo AVX-390 - page 22

    22 En Speaker Layout The illustration shows which spea kers are activated in each channel. See “S p Config (Sp eaker Configuration)” for the speaker setup ( ➔ pa ge 29 ). ■ Onkyo-Original DSP Listen ing Modes ■ Listening Modes Listening Mode Description Input Source Speaker Layout Orchestra Suitable for classical or operatic music, th is ...

  • Onkyo AVX-390 - page 23

    23 En Note *1 For the Blu-ray Discs, Dolby Digital is used. *2 AV receiver can input the DSD signal from HDMI IN. Setting the outp ut setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output settin g on the player side to PCM. • The listening modes cannot be se lected with some source for ...

  • Onkyo AVX-390 - page 24

    24 En The Home menu provides you qu ick access to frequently used menus without having to go throu gh the long standard menu. This menu enab les you to change settings and view the current information. Note *1 For the PORT input selector, the na me of Universal Port Option Dock will be displayed. *2 Depending on the input source and listening mode, ...

  • Onkyo AVX-390 - page 25

    25 En You can adjust the brightne ss of the AV receiver’s display. You can display various info rmation about the current input source as follows. (Components connected to the UNIVERSAL PORT jack are excluded.) The following information ca n typically be displayed. Tip • Alternatively, you can use the AV receiver’s DISPLAY . *1 When AM or FM ...

  • Onkyo AVX-390 - page 26

    26 En You can temporarily mute the output of the AV receiver. This section explains how to record t he selected inpu t source to a component with recording capability, and how to record audio and vide o from different sources. AV Recording Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD record er). Video sources can b ...

  • Onkyo AVX-390 - page 27

    27 En Advanced Op erations Advanced Setup Note • The on-screen setup me nus are displayed when: – There is no video input, or – The video input is 480p, 576p, 720 p, 1080i, or 1080p. The on-screen setup menus a ppear on the connected TV and provide a convenient way to change the AV receiver’s various settings. Sett ings are organized into 1 ...

  • Onkyo AVX-390 - page 28

    28 En Explanator y Notes Menu HDMI In put If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector. Here are the defa ult assignments. ■ BD/DVD , VCR/DVR , CBL/SAT , ...

  • Onkyo AVX-390 - page 29

    29 En Note •W h e n a n HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ page 28 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., COAXIAL , etc.), you can also select HDMI inputs. • Available sampling rate for PCM signals from a digital input (optical and coaxial) i ...

  • Onkyo AVX-390 - page 30

    30 En Menu Sp Distance Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the list ener’s ears as the sound designer intended. Note • These settings are disabled when: – a pair of headphones is connected , or –t h e “ Audio TV Out ” setting is set to “ On ” ( ...

  • Onkyo AVX-390 - page 31

    31 En Menu Audio Adjust With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. Multiplex/Mono Settings ■ Multiplex Input Ch (Mux) ` Main ` Sub ` Main/Sub This setting determ ines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex source ...

  • Onkyo AVX-390 - page 32

    32 En Menu Source Setup Audyssey ■ Dynamic EQ ` Off ` On : Audyssey Dynamic EQ ® becomes activ e. The Dynamic EQ indicator will light ( ➔ pa ge 8 ). With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking ...

  • Onkyo AVX-390 - page 33

    33 En Tip • To fully enjoy Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® , we recommend that you manually adjust the level of each speaker using “Level Cal (Level Calibration)” ( ➔ page 30 ). A/V Sync ■ A/V Sync ` 0m s to 400 ms in 10 ms steps When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the p ...

  • Onkyo AVX-390 - page 34

    34 En . Menu Hardware OSD ■ Volume OSD ` On ` Off You can select if you wish to display the volume level on- screen, when it is adjust ed. Remote Control ■ Remote ID ` 1 , 2 , or 3 When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from the other components, you can chang ...

  • Onkyo AVX-390 - page 35

    35 En Note • When set to “ On ” and close the menu, the name of connected p -compatible components and “ RIHD On ” are displayed on the AV receiv er. “ Search… ” → “ (name) ” → “ RIHD On ” When the AV receiver cannot receive the name of the component, it i s displayed as “ Player* ” or “ Record er* ”, e tc (“ * ...

  • Onkyo AVX-390 - page 36

    36 En You can change various audi o settings from the Home menu ( ➔ page 24 ). Note • These settings are disabled when: – a pair of headphones is connected , or –t h e “ Audio TV Out ” setting is set to “ On ” ( ➔ page 35 ) and an input selector other th an HDMI is selected, or –“ HDMI Ctrl (RIHD) ” is set to “ On ” ( ? ...

  • Onkyo AVX-390 - page 37

    37 En Note • The effect of the Lat e Night function depends on the material that you are playing and the in tention of the original sound designer, and with some material there will be little or no effect when you select the different options. • The Late Night function can be used only when the input source is Dolby Digital, Dolby Digital Plus, ...

  • Onkyo AVX-390 - page 38

    38 En Controlling Other Components iPod/iPhone Playback via Onkyo Dock UP-A1 Dock With the UP-A1 Dock, you can easily play the mu sic, photo, or movie stored on your Apple iPod/iPhone through the AV receiver and enjoy great sound. You can use the AV receiver’s remote controller to operate your iPod/iPhone. ■ System Function Auto Power On If you ...

  • Onkyo AVX-390 - page 39

    39 En ■ Status Messages If either of the following me ssage is not displayed on the AV receiver’s display, check the connection to your iPod/iPhone. • P ORT Reading The AV receiver is checking the connection with the dock. • P ORT Not Support The AV receiver do not support the connected dock. •P O R T U P - A 1 UP-A1 Dock is connected. No ...

  • Onkyo AVX-390 - page 40

    40 En ✔ : Available buttons Note • With some iPod/iPhone models and generations , certain buttons may not work as expected. • For detailed operation of the iPod/iPhone, please ref er to the instruction manua l. *1 This button does not tur n the Onkyo DS-A2 or DS-A2X RI Dock on or of f. Your iPod/iPhone may not r espond the first time you pres ...

  • Onkyo AVX-390 - page 41

    41 En Controlling Other Onkyo Components You can use the AV receiver’s remote controller to control your other Onkyo AV compon ents. This section explains how to enter the re mote control code (with the default underlined) for a com ponent that y ou want to control: DVD, CD, etc. The following REMOTE MODE are preprogrammed with remote control cod ...

  • Onkyo AVX-390 - page 42

    42 En You can reset a REMOTE MODE to its default remote control code. You can reset the remote contro ller to its default settings. By pressing REMOTE MODE that’s been programmed with the remote control c ode for your component, you can control Onkyo component as below. For details on entering a re mote control code for a different component ( ? ...

  • Onkyo AVX-390 - page 43

    43 En Note • With some components, certain butto ns may not work as expected, and some may not work at all. ✔ : Available buttons *1 The p function is not suppor ted. The p supported by the AV receiver is the CEC system control function of the HDMI standar d. *2 These buttons function as colored buttons or A, B, C, D buttons. *3 3 (Pause) funct ...

  • Onkyo AVX-390 - page 44

    44 En Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The AV receiver tu rns off unexpectedly ■ When the power is restored after a power interruption, “CHECK SP WIRE” appear ...

  • Onkyo AVX-390 - page 45

    45 En ■ Only the front speakers produce sound ■ Only the cent er speaker produces soun d ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The subwoo fer produces no sound ■ There’s no sound with a certain signal format ■ Can’t get 5.1 playbac k ■ The speaker volume cannot be set as required ■ N ...

  • Onkyo AVX-390 - page 46

    46 En ■ There’s no picture from a source connected to an HDMI IN ■ The on-screen menu s don’t appear ■ Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light ■ The remote contro ller doe sn’t work ■ Can’t control other components ■ There’s no sound ■ There’s no video ■ The AV receive ...

  • Onkyo AVX-390 - page 47

    47 En ■ The AV receiver unexp ectedly selects your iPod/iPhone as the input source ■ Can’t record ■ Standby power consumpti on ■ The sound ch anges whe n I connect my headphones ■ How do I change the langua ge of a multiplex source ■ The u functions don’t w ork ■ The following set tings can be made fo r the composite video inputs ...

  • Onkyo AVX-390 - page 48

    48 En Connection Tips and Video Signal Path The AV receiver supports seve ral connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your com ponents. Use the followi ng sections as a guide. Note • The on-screen setup men us are displayed when: – There is no video in ...

  • Onkyo AVX-390 - page 49

    49 En About HDMI Designed to meet the increased demand s of digital TV, HDMI (Hi gh Definition Multimedia Inte rface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD player s, set-top boxes, and other video components. Until now, several separate video and a udio cables have been required to connect AV component ...

  • Onkyo AVX-390 - page 50

    50 En Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be us ed with CEC (Consumer Elect ronics Control), which al lows system control over HDMI and is part of the HDMI standa rd. CEC provides interope rabilit ...

  • Onkyo AVX-390 - page 51

    51 En ■ How to connec t and setup 1 Confirm the connecting and settin g. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return chan nel (ARC) function is used with an ARC capable TV, this co n ...

  • Onkyo AVX-390 - page 52

    52 En Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notic e. Rated Output Power All channels: (North Am erican) 110 watts mini mum continuous power per channel , 6 ohm loads, 1 ch ...

  • Onkyo AVX-390 - page 53

    53 En Memo ...

  • Onkyo AVX-390 - page 54

    54 En Memo ...

  • Onkyo AVX-390 - page 55

    55 En Memo ...

  • Onkyo AVX-390 - page 56

    * 2 9 4 0 0 5 9 8 * Y1012-1 SN 29400598 (C) Copyright 2010 ONKY O SOUND & VISION CORPORA TION Japan. All rights reser ved. ONKY O SOUND & VISION CORPORA TION 2-1, Nisshin-cho , Ney agawa-shi, OSAKA 572-8540, JAP AN T el: 072-831-8023 Fax: 072-831-8163 ONKY O U.S.A. CORPORA TION 18 P ark W ay , Upper Saddle Riv er , N.J. 07458, U .S.A. T el: ...

Manufacturer Onkyo Category Home cinema set

Documents that we receive from a manufacturer of a Onkyo AVX-390 can be divided into several groups. They are, among others:
- Onkyo technical drawings
- AVX-390 manuals
- Onkyo product data sheets
- information booklets
- or energy labels Onkyo AVX-390
All of them are important, but the most important information from the point of view of use of the device are in the user manual Onkyo AVX-390.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Onkyo AVX-390, service manual, brief instructions and user manuals Onkyo AVX-390. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Onkyo AVX-390.

Similar manuals

A complete manual for the device Onkyo AVX-390, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Onkyo AVX-390 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Onkyo AVX-390.

A complete Onkyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Onkyo AVX-390 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Onkyo AVX-390, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Onkyo AVX-390, that we can find in the current document
3. Tips how to use the basic functions of the device Onkyo AVX-390 - which should help us in our first steps of using Onkyo AVX-390
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Onkyo AVX-390
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Onkyo AVX-390 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Onkyo AVX-390?

Use the form below

If you did not solve your problem by using a manual Onkyo AVX-390, ask a question using the form below. If a user had a similar problem with Onkyo AVX-390 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)