Manual Harbor Freight Tools 91142

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • Harbor Freight Tools 91142 - page 1

    PRESSURE W ASHER WITH ROBIN 6 HP ENGINE Model 91 142 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 ...

  • Harbor Freight Tools 91142 - page 2

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 2 Specications Gas Engine Robin , OHV Engine 6 HP , unleaded gas, recoil, 3400 RPM, low oil shut- down; Oil capacity: 20 oz. (0.6 L); Gas capacity: 4 quarts (3.8 Liter) Refer to the Robin maintenance manual for further details Pressure W asher Gun 2900 PSI Maximum, Safety trigg ...

  • Harbor Freight Tools 91142 - page 3

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 3 Use eye and ear protection . Always wear ANSI approved impact safety goggles and heavy rubber boots. During pressure washing, debris can y back into your face. Wear an ANSI approved dust mask or respirator when working around chemi- cal dusts and mists. Do not overreach . Kee ...

  • Harbor Freight Tools 91142 - page 4

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 4 W arning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, b ...

  • Harbor Freight Tools 91142 - page 5

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 5 Unpacking When unpacking, check and make sure that the following parts are included. If any parts are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual as soon as possible. Upper Bracket (3A) Engine (4A) Pump (5A) Bracket Screw (12A) ...

  • Harbor Freight Tools 91142 - page 6

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 6 Operation Important Guidelines • Do leave the engine running without spraying water . If it is left on for more than three minutes without discharging the high pressure water , damage could occur to the internal pump and high pressure hose. • The water hose should provide at ...

  • Harbor Freight Tools 91142 - page 7

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 7 Use 4. Pick up the Spray Gun (2A) and point it away from you. Squeeze the T rigger Handle until all internal air is released, and a steady ow of water comes out. Release the T rigger Handle. 5. Move the Choke Lever (C) to the closed (left) position. See engine photo below . 6 ...

  • Harbor Freight Tools 91142 - page 8

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 8 Using Detergent CAUTION! T o avoid injury , ONL Y run pressure washer detergent through the Detergent Suction Hose. Place the end of the transparent Detergent Suction Hose into the detergent container or bottle. High pressure Low pressure Figure B Do not dilute the detergent. Th ...

  • Harbor Freight Tools 91142 - page 9

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 9 Maintenance 1. Wipe down the entire unit with a clean cloth. Do not use any solvents. 2. Store the unit in a clean and dry location, away from anything ammable. 3. Read and follow maintenance instructions for the engine in the Robin Subaru 6 HP Engine Maintenance Manual. 4. I ...

  • Harbor Freight Tools 91142 - page 10

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 10 Pump Assembly Parts List Item Description Qty . 1 Adjusting Cap, P A66 1 2 High Pressure Screw Cap, 59-1 1 3 Adjusting Spring, 65 Mn 1 4 V alve Core, 59-1 1 5 O-ring, ¢1 1x1.9 1 6 Junction Screw Cap, 59-1 1 7 O-ring, ¢22x1.9 1 8 O-ring, ¢9x1.9 1 9 O-ring, ¢16x1.9 1 10 Air-p ...

  • Harbor Freight Tools 91142 - page 11

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 1 1 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER NOR DISTRIBUTOR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND TO THE BUYER THA T HE OR SHE IS QU ...

  • Harbor Freight Tools 91142 - page 12

    SKU 91 142 For technical questions, please call 1-800-444-3353. Page 12 Major Assembly Parts List Item Description Qty . 1A Hose, High Pressure 1 2A Spray Gun 1 3A Bracket, Upper 1 4A Engine, Gas 1 5A Pump 1 6A Wheel, Left 1 7A Bracket, Bottom 1 8A Connector , W ater Inlet 1 9A Connector , W ater Outlet 1 10A Wheel, Right 1 1 1A Screw 2 12A Screw , ...

Manufacturer Harbor Freight Tools Category Pressure Washer

Documents that we receive from a manufacturer of a Harbor Freight Tools 91142 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 91142 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 91142
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 91142.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 91142, service manual, brief instructions and user manuals Harbor Freight Tools 91142. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 91142.

A complete manual for the device Harbor Freight Tools 91142, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 91142 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 91142.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 91142 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 91142, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 91142, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 91142 - which should help us in our first steps of using Harbor Freight Tools 91142
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 91142
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 91142 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 91142?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 91142, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 91142 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)