Manual Canon XL1

88 pages 3.02 mb
Download

Go to site of 88

Summary
  • Canon XL1 - page 1

    DIGIT AL VIDEO CAMCORDER Instruction Manual CAMÉSCOPE ET LECTEUR VIDEO NUMÉRIQUES Mode d’emploi VIDEOCÁMARA Y GRAB ADORA DIGIT AL Manual de Instrucciones ENGLISH FRANÇAIS ESP AÑOL Mi ni D igital Video Cassette A (NTSC) E F Es ...

  • Canon XL1 - page 2

    Introduction 2 E W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Impor tant Usa ge Instructions Digital Video Camcorder , XL1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) ...

  • Canon XL1 - page 3

    Introduction 3 E IMPOR T ANT SAFETY INSTR UCTIONS In these safety instructions the word “product” refers to the Canon Digital Video Camcorder DM-XL1A and all its accessories. 1. Read Instructions — All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions — The safety and operating instr ...

  • Canon XL1 - page 4

    Introduction 4 E 19. Damage Requiring Service — Disconnect this product from the wall outlet and all power sources including battery , and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into, the product ...

  • Canon XL1 - page 5

    ~ When Making Manual Adjustments ...~ Adjusting the Focus ..........................................44 Adjusting the Exposure ......................................45 Using AE Shift ..................................................46 Using the Zebra Pattern ......................................47 Adjusting the Gain ............................... ...

  • Canon XL1 - page 6

    Introduction 6 E Thank y ou f or choosing a Canon The XL1 is supplied with the following accessories: WL-D2000 Wireless Controller T wo AAA batteries SS-1000 Shoulder Strap Lens cap BP-927 Battery Pack CA-900/CA-910 Compact Power Adapter Lithium button battery DC-900 DC Coupler S-150 S-video Cable STV -150 Stereo Video Cable Digital Video Cassette ...

  • Canon XL1 - page 7

    Introduction 7 E Choose to operate the XL1 using the Manual recording program to access the complete set of manual functions, for exceptional creative freedom. From wide-angle to 16 × telephoto — with unparalleled optical quality . The digital zoom doubles this magnification for even more dramatic results. Canon’ s latest advances in stabiliza ...

  • Canon XL1 - page 8

    Preparation 8 E Any lens bearing the mark can be used with this camcorder . 1. Remove the dust cap from the lens and the body cap fr om the camcorder . 2. Align the red dot on the camera body with the mount positioning point (the r ed dot) on the lens, then turn the lens clockwise until it clicks and locks into place. Mounting the lens 1. Slide and ...

  • Canon XL1 - page 9

    Preparation 9 E 1. Remove the lens cap. 2. Align the hood with the lens lengthways, and the Canon logo facing to the left. 3. T wist it 90° into position (clockwise), so that the Canon logo is to the top. • Y ou do not need to assert any pressure — screw the hood lightly into place. 4. Finally , tighten the locking screw . • T o remove, reve ...

  • Canon XL1 - page 10

    Preparation 10 E Y ou can slide the viewfinder unit along the bracket to a position that best suits you — for use with either the left or right eye. 1. Loosen the locking screw and slide the unit to the position you requir e along the bracket. 2. Tighten the locking scr ew . 3. Switch the eye cup around (if necessary). • Slide and hold the rele ...

  • Canon XL1 - page 11

    Preparation 11 E T o monitor the scene with your eye near to the viewfinder turn the EYE POINT SELECT switch to NEAR. T o view the scene at a distance from the viewfinder , turn the switch to F AR. Adjusting to y our viewing point EYE POINT SELECT NEAR FAR • In record pause mode, turn the viewfinder focusing ring (focusing the display between – ...

  • Canon XL1 - page 12

    Preparation 12 E 1. Loosen the microphone attachment scr ew on the viewfinder unit and insert the microphone into the micr ophone clamp. 2. Align the mark on the microphone with the mark on the clamp and tighten the scr ew to hold the microphone firmly in place. 3. Plug the microphone cable to the camera’ s MIC terminals. Note: • Make sure that ...

  • Canon XL1 - page 13

    Preparation 13 E P owering the XL1 Before operating your camera, you will need to use the power adapter to: provide power from an AC outlet or charge a battery pack Notes: • The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz) to the DC current used by your camera. • If the adapter is used next to a TV , i ...

  • Canon XL1 - page 14

    Preparation 14 E Charging and attac hing the battery pack Y our battery pack was partially charged before it left the factory . It should have enough power for you to check that your camera is working properly . However , you must charge the battery pack fully if you want it to power the camera for more than a few minutes. 1. Attach the battery pac ...

  • Canon XL1 - page 15

    Preparation 15 E Loading a Cassette 1. Make sure that you have inserted a power sour ce. 2. Slide the EJECT 5 button acr oss to release the cover . • W ait a couple of seconds for the cassette compartment to open automatically . 3. Load or unload the cassette. • Insert the cassette gently with the window facing out. • Remove the cassette by p ...

  • Canon XL1 - page 16

    Preparation 16 E Protecting tapes fr om accidental erasure T o protect your recording from accidental erasure, slide the tab on the cassette so that it exposes the hole and the red mark. (This switch position is usually labeled SA VE or ERASE OFF .) If you load this cassette and put the camera in record pause mode (p. 23), “THE T APE IS SET FOR E ...

  • Canon XL1 - page 17

    Preparation 17 E Suppor ting the Camera • For extra comfort and control, attach the shoulder pad to the camera. • Clip the adapter unit onto the base of the camcorder and tighten the fixing screw using a coin. • When you are not using the shoulder pad, fold it in towards the camera until it clicks into the storage position. Prepare the lens c ...

  • Canon XL1 - page 18

    Preparation 18 E Selecting fr om the Menus Many of the camera’ s advanced functions are selected from menus which appear in the viewfinder . There are two main menus: 1. Camera menu (when the camera is in record pause mode: the POWER dial set to a recording pr ogram.) 2. VCR menu (when the POWER dial is set to VCR) Camera menu (CAM. MENU) 1 Zebra ...

  • Canon XL1 - page 19

    Preparation 19 E PHOTO SELF TIMER WT ZOOM START/ STOP DATA CODE ON SCREEN MENU POWER VCR OFF Tv Av M A MENU 4, 5, 6 3, 7 1 2 1. T urn the POWER dial to a recording pr ogram or to VCR. 2. Slide open the red cover to r eveal the menu operation keys. 3. Press the MENU button to open the menu. 4. Press r or t cursor key to move the arr ow up or down th ...

  • Canon XL1 - page 20

    Preparation 20 E Using the Wireless Controller/T ally Lamps The supplied wireless controller can operate the camera from a distance of up to 16 feet (5 m). Point it at either of the camera’ s remote sensors while you press the buttons. The tally lamps light up to let you know that the camera is in range and responding to your commands. There are ...

  • Canon XL1 - page 21

    Preparation 21 E T urning off the tally lamps The tally lamps let you know that the camera is recording. However , the flashing of the front lamp may be reflected into the lens during close-up recording, or when recording through glass. Y ou may therefore decide to turn them of f. TALLY LAMP••OFF 1. Open either the camera menu or the VCR menu, ...

  • Canon XL1 - page 22

    Preparation 22 E Setting the Date and Time The date and/or time display forms part of the data code. Y ou can choose to display or hide it during playback (see p. 54). Set the date and time display when you first start using your camera. Install the backup battery before you begin (see p. 63). 1. T urn the POWER dial to a recording pr ogram or to V ...

  • Canon XL1 - page 23

    Recording E 23 Basic Recor ding • Attach a power source (p. 13). • Load a cassette (p. 15). • Remove the lens cap and fasten the shoulder pad (p. 17). • Adjust the viewfinder (p. 10). • Choose your grip — side or top (p. 65). Y ou may also want to install the backup battery (p. 63) in order to set the date and time display (p. 22). POWE ...

  • Canon XL1 - page 24

    Recording E 24 Y ou can record and play back a tape in SP (standard play) and LP (long play) modes. LP extends tape usage by 1.5 times. T o switch to LP mode, select REC MODE from the camera or VCR menu, select LP and then close the menu (for instructions on how to use the menus, refer to page 18). Changing the recording mode (SP/LP) Y ou can show/ ...

  • Canon XL1 - page 25

    Recording E 25 Zooming (f or Zoom Lenses) Operate the zoom controls from either the side grip or the camera handle. T urn the zoom control towards W to zoom out to wide-angle. T urn it towards T to zoom in to telephoto. Y ou can also zoom in and out using the lens’ s zoom ring. T o control the speed of zooming (using the zoom control on the side ...

  • Canon XL1 - page 26

    Recording E 26 32 × digital zoom Activate the digital zoom to double the camera’ s zoom range. The zoom control continues to work as usual — the camera automatically switches between optical zooming and digital zooming. • Image resolution is slightly lower when the magnification exceeds the optical zoom range. 1. T urn the POWER dial to any ...

  • Canon XL1 - page 27

    Recording E 27 T urning the SuperRange Optical Image Stabiliz er On/Off ON STABILIZER OFF The Optical Image Stabilizer can compensate for a wide range of camera movement — you can record stable images even if you are shooting from a moving car . Before you start recording, slide the ST ABILIZER switch on the video lens to turn the image stabilize ...

  • Canon XL1 - page 28

    Recording E 28 On bright days or when recording very bright scenes, despite the iris being at its smallest aperture, blurring of the image may occur . In such cases, using an ND filter should remove this problem. The 16 × zoom lens XL comes with a built-in ND filter . The ND FIL TER switch is located on the body of the XL lens. Slide the ND FIL TE ...

  • Canon XL1 - page 29

    Recording E 29 T aking Still Pictures (Photo Mode) Y ou can record still pictures like a photograph. The camera records the picture to tape for approximately 6 seconds. The exposure is automatically adjusted. There are two PHOTO buttons, to let you take still images from both gripping positions. 1. Set the camera to standby mode (turn the POWER dia ...

  • Canon XL1 - page 30

    Recording E 30 Choosing the Mo vie Mode (Normal/Frame) The Frame mode can be used when you want to look at a video, scene by scene, free from field slippage (the “flicker” that normally occurs when you pause a video). The vertical resolution of the image is improved by 1.5 × . During playback, pause the video any time you like to view a crysta ...

  • Canon XL1 - page 31

    Recording E 31 Sear ching and Re viewing While Recor ding When the camera is in record pause mode, you can use record review to play back the last few seconds of your recording and then return automatically to record pause mode. 1. Make sure the camera is in r ecord pause mode. 2. Press and r elease the c (record r eview) button while you check the ...

  • Canon XL1 - page 32

    Recording E 32 Using the V arious Recor ding Pr ograms The camera provides you with a choice of six recording programs. They use dif ferent combinations of camera settings in order to adjust the exposure and other functions to match the recording situation. The name of your selected recording program appears constantly on the left of the display , ...

  • Canon XL1 - page 33

    Recording E 33 Select this program for total creative freedom when operating the camcorder . Y ou can set aperture and shutter speeds completely independently to give you exactly the exposure you require. There are 27 shutter speed settings, between 1/60 and 1/15000 of a second and 27 aperture values, between f/1.6 and f/16 (you can also close the ...

  • Canon XL1 - page 34

    Recording E 34 Use this program to let you select the aperture (iris diameter) to give you maximum control over the depth of field. A lar ge F number (a small aperture) gives a greater depth of field. Giving priority to the aper ture (aperture-priority: A v) Av Av F2.8 Use this program to let you select the shutter speed. The camera sets the approp ...

  • Canon XL1 - page 35

    Recording E 35 • The flashing display changes to show which effect you can select. • The camera only displays selectable effects. Activ ating the Slow Shutter D.EFFECT SELECT ON/OFF POWER VCR OFF Tv Av M A E- T FA D No Display W S SLO 0 .3 OO M D. Z W S SL O 5 .1 W S SLO . 8 3. Press the D.EFFECT ON/OFF button to activate the slow shutter . • ...

  • Canon XL1 - page 36

    Recording E 36 The XL1 can record sound in three audio modes: • 16-bit (48kHz, 2 channel) for the highest sound quality • 12-bit ST -1 (32kHz, 2 from 4 channels) for recording on two channels (stereo 1), leaving two channels (stereo 2) free for you to add new sound at a later date. • 12-bit ST -1, 2 (32kHz, 4 channels) for simultaneous record ...

  • Canon XL1 - page 37

    Recording E 37 Set the input for Stereo 1 in one of two ways, A or B, depending on the source for the input: Setting the A udio Input — T w o Channel Recording 1. Change the audio mode at the menu if necessary (see page 36). 2. Slide the INPUT SELECT switch to AUDIO 1. • This assigns the AUDIO 1 RCA jacks as the source for the audio input. In n ...

  • Canon XL1 - page 38

    Recording E 38 In normal recording conditions, the camera sets the audio recording level automatically as long as you slide the REC LEVEL switch to A (automatic). Y ou can also set the recording level manually: 1. Set the recording level for ster eo 1 in exactly the same way as for two channel recording. 2. Set the recording level for ster eo 2 by ...

  • Canon XL1 - page 39

    Recording E 39 Press the AUDIO MONITOR button to make a sound check — stereo 1 only (ST1), stereo 2 only (ST2) or both (MIX) [each in turn]. • Y our choice is selected a few seconds after you last pressed the button, and shown in the viewfinder and audio LCD panel. • Unlike selecting the audio output in VCR mode, you cannot mix the balance at ...

  • Canon XL1 - page 40

    Recording E 40 Set the fade trigger each time you wish to use it (both before you fade in and again before you fade out). F ADE-T is shown constantly in the viewfinder when it is ready for use. 1. T urn the POWER dial to any recording program (except Easy Recording). 2. Press the D.EFFECT SELECT button to move through the list of effects in the vie ...

  • Canon XL1 - page 41

    Recording E 41 Notes: • Y ou cannot select a different digital effect while the fade trigger is still turned on. • Y ou can turn the fade trigger off before you use it by pressing the D.EFFECT ON/OFF button again. • Y ou are unable to use the fade trigger with the Easy Recording program. • The fade trigger setting is remembered by the camer ...

  • Canon XL1 - page 42

    Recording E 42 Setting the Self-Timer 1. Press the wir eless controller’s SELF TIMER button. • SELF TIMER appears in the viewfinder . 2 Press the wir eless controller’s ST AR T/STOP button. • The camera starts to record after a 2 second countdown period (or after 10 seconds if you press the start/stop button on the camera). The time remaini ...

  • Canon XL1 - page 43

    Recording E 43 Using a Canon Speedlite f or Flash Photograph y (optional) For SLR-style flash photography , attach a Canon Speedlite 380EX to the camera using the optional F A-100 Flash Adaptor . Attach its hot shoe cube to the XL1’ s accessory shoe, and the flash cable to the flash adapter terminal. Use the camera in exactly the same way as you ...

  • Canon XL1 - page 44

    Recording E 44 Adjusting the Focus The camera can focus automatically . All you have to do is point it, and whatever is in the center of the display will usually be in sharp focus. If it does not seem to be focusing well, it may be because the subject is not suitable for autofocus (page 70). Also, if you attach a filter other than UV or ND, the aut ...

  • Canon XL1 - page 45

    Recording E 45 Adjusting the Exposure Notes: • Y ou cannot lock the exposure in the M (Manual) recording program. • The standard exposure level depends on which recording program you have selected, but the shutter normally operates at 1/60 of a second. • Exposure lock is canceled if you change the setting of the POWER dial. • Y ou cannot us ...

  • Canon XL1 - page 46

    Recording E 46 By controlling the level of the automatic exposure (AE) function, you can lighten or darken the image slightly . This allows you to compensate for backlit subjects or subjects with predominately dark or light tones. Using AE Shift 1. T urn the POWER dial to the Auto, Tv or A v recording program. 2. T urn the AE SHIFT dial to adjust t ...

  • Canon XL1 - page 47

    Recording E 47 The zebra pattern is a series of diagonal stripes that appear in the viewfinder to highlight areas of overexposure. Use as a guide to setting the aperture (iris) and shutter speed. 1. Open the camera menu and select ZEBRA. 2. Select the ON setting and close the menu. Using the Zebra P attern POWER VCR OFF Tv Av M A MENU ZEBRA••? ...

  • Canon XL1 - page 48

    Recording E 48 When the GAIN knob is set to n (auto) the camera adjusts the gain automatically . Y ou can also rotate the GAIN dial to one of the five preset levels that range from –3 to +12 dB. 1. T urn the POWER dial to any recording pr ogram except [ [ (Easy Recording) or (Spotlight). 2. Press the GAIN knob so that it pops out. Y ou can now tu ...

  • Canon XL1 - page 49

    1. T urn the POWER dial to any recording pr ogram (except the [ Easy Recording program). 2. Press the white balance selector knob so that it pops out. Y ou can now turn it to choose between A for auto white balance, for indoor lighting, for outdoor lighting, or turn it to the right to set the white balance manually . • / appears in the viewfinder ...

  • Canon XL1 - page 50

    Recording E 50 Notes: • If the lighting conditions change, reset the white balance by first returning to the auto setting, and then reselecting the manual balance. • Try to record with light from a single source. Correct white balance cannot be obtained for two types of lighting at once. • Y ou cannot set the white balance manually or use the ...

  • Canon XL1 - page 51

    Playbac k E 51 Pla ying back a Cassette Y ou can use the viewfinder for instant, on-the-spot playback. T o play back your recordings on a TV , see p. 56. T o use the wireless controller , see p. 20. Note: • T o avoid accidental recording, make sure that you slide the tab on the cassette so that it exposes the hole (the switch position is usually ...

  • Canon XL1 - page 52

    Playbac k E 52 Playback Pause T o view the video as a still picture press the P AUSE a button. T o resume normal playback, press it again, or press the PLA Y e button. The camera automatically goes into stop mode after about five minutes’ playback pause. Edit Search When the camera is in playback pause, you can use edit search to play the tape fo ...

  • Canon XL1 - page 53

    Playbac k E 53 Note: • Mosaic-like noise appears on the screen during some of the VCR modes. These can only be operated from the wireless controller (p. 20) Frame Advance T o play back frame by frame, press the +/ ae button repeatedly during playback pause. Press and hold to play back continuous frame advance. Frame Reverse T o play back on rever ...

  • Canon XL1 - page 54

    Playbac k E 54 A data code, containing the date and time the recording was made and other camera data (shutter speed and exposure settings) is automatically recorded on a special data section of the tape. During playback, the data code can be displayed or hidden while the camera is in play , reverse playback, slow forward/reverse playback or frame ...

  • Canon XL1 - page 55

    Playbac k E 55 Sear ching Thr ough Y our Recor ded “Photos” (Photo Search) Move quickly through still pictures recorded anywhere on a tape. • Y ou can only use this function from the W ireless Controller . 1. T urn the POWER dial to VCR. 2. Press the and buttons to move backwards or forwards through the still pictur es. • Press once to move ...

  • Canon XL1 - page 56

    Playbac k E 56 Connections f or Pla yback on a TV Screen Y ou can connect the camera to a TV or VCR in order to play back your recordings. Y ou will need to attach a power source to the camera (see p. 13). See your TV or VCR instruction manual for further details. • Use the S-150 S-video Cable to connect the S-video terminal d . Use the STV -150 ...

  • Canon XL1 - page 57

    Playbac k E 57 R L V L R S AUDIO 1 S-VIDEO AUDIO VIDEO STV -150 Stereo Video Cable S-150 S-video Cable Editing to a VCR 1. Find a point on your recorded cassette slightly ahead of the section you want to copy . 2. Start to play it back while you monitor the picture on the TV . 3. Start recording on the VCR as soon as the section you want to copy ap ...

  • Canon XL1 - page 58

    Playbac k E 58 REC Digital video equipment fitted with this terminal lets you edit, copy and transfer data digitally , with imperceptible loss in image and sound quality . The DV terminal is for both line-in and line-out, since a single DV cable can handle data in both directions. Use a Canon CV -150F DV cable to connect two digital devices togethe ...

  • Canon XL1 - page 59

    Playbac k E 59 REMOTE The REMOTE m terminal allows you to connect the camera to editing equipment. Some buttons on editing equipment may operate differently from those on the camera. • m (LANC) is a trademark. It stands for Local Application Control Bus System. • W e cannot guarantee the results when connecting to equipment not bearing the LANC ...

  • Canon XL1 - page 60

    Playbac k E 60 a) Press the AUDIO MONITOR button to display “STEREO1”, “STEREO2”, and “MIX”, each in turn. • Y our choice is selected a few seconds after you last pressed the button. If you choose “MIX” you can go on to mix the balance. • Use the r / t cursor keys to choose the mix balance. (or the ST -1/ST -2 MIX BALANCE button ...

  • Canon XL1 - page 61

    Playbac k E 61 (ii) Choosing the output channel 1. Make sure the camera is set to VCR mode. 2. Open the menu and select the output channel. Notes: • When you have chosen the output, “STEREO1”, “STEREO2”, or “MIX” is shown in the top left of the viewfinder and in the audio LCD panel. If you turn the power off, the output (and display) ...

  • Canon XL1 - page 62

    Additional Information E 62 Notes on Using the Batteries Charging and recor ding times Battery pack BP-927 BP-941 (supplied) (option) T ime needed for full recharge 3h 50 min. 4h 40 min. Maximum recording time 1h 30 min. 2h 15 min. • These times may vary . • Y ou will get more recording time if you turn the camera off between shots, instead of ...

  • Canon XL1 - page 63

    Additional Information E 63 T aking care of the batter y pac k Always attach the terminal cover . • Do not allow any metal objects to touch the terminals, as this can cause a short circuit and damage the battery pack. Attach the terminal cover whenever the battery pack is not being used. Installing the backup battery Pull out the battery holder f ...

  • Canon XL1 - page 64

    Additional Information E 64 Cautions: • Do not pick up the battery using tweezers or other metal tools — this will cause a short circuit. • Wipe the battery with a clean, dry cloth to ensure proper contact. • Keep the back-up battery out of reach of children — if it is swallowed, contact a physician immediately , as the battery case may b ...

  • Canon XL1 - page 65

    Additional Information E 65 Camera Holding Styles For maximum stability , place your right hand through the side grip belt and keep your right elbow pressed against your body . Rest the rear of the camera against the front of your shoulder and then support the lens with your left hand. • Y ou can grip the camera from the side grip, or top handle. ...

  • Canon XL1 - page 66

    Additional Information E 66 Maintenance A void high temperatur es and high humidity . • Do not leave the camera inside a car in hot weather , for example. • Be careful of heat radiating from video lighting equipment. • Do not take the camera into a humid room. A void sudden changes in temperatur e. • If you take the camera from a cold place ...

  • Canon XL1 - page 67

    Additional Information E 67 Power sources • Y ou can use the compact power adapter to operate your camera and charge battery packs in any country where the electricity supply is between 1 10 and 240 V AC, 50/60 Hz. Contact your Canon dealer for information about plug adapters for overseas use. TV playback • Although you can always play back you ...

  • Canon XL1 - page 68

    Additional Information E 68 Condensation Condensation may form on the camera when it is moved from a cold place to a warm place. Using the camera while condensation is present can damage both the tape and the camera. Condensation may become a problem: • When you bring the camera from a cold place to a warm room • When a cold room is heated rapi ...

  • Canon XL1 - page 69

    Additional Information E 69 T roubleshooting Cause and/or what to do about it • The camera is not switched on (p. 23, 51). • The cassette is not loaded or is set for erasure prevention (p. 15-16). • The tape has reached the end. • The battery pack is exhausted or not properly attached (p. 13, 14, 62). • The function cannot be used in that ...

  • Canon XL1 - page 70

    Additional Information E 70 Note: Some subjects are not suitable for autofocus. In these situations, you will often get better results using manual focus (see p. 44). • Horizontal stripes • Many subjects at different distances • Behind glass • Without much contrast (e.g. a white wall) • Reflective surfaces (e.g. shiny car surfaces) • Fa ...

  • Canon XL1 - page 71

    Additional Information E 71 Cause and/or what to do about it • The remote sensor is turned off (p. 21). • The batteries are dead or not inserted. • They are turned off (p. 21). • This is unlikely , but may happen if you use the camera in places where the air pressure is low , in an airplane for example. The bubbles will disappear a week or ...

  • Canon XL1 - page 72

    Additional Information E 72 The XL1 System Diagram (A v ailability differs fr om area to area) BP-911, BP-914, BP-924, BP-927, BP-941 Battery Pack WL-D2000 Wireless Controller MiniD V Video Cassette FS-72U Filter Set Extender XL 1.6 × 16 × Zoom Lens 3 × Zoom XL 3.4–10.2mm EF Adapter XL EF lens CB-900 Car Battery Adapter CA-900/CA-910 Compact P ...

  • Canon XL1 - page 73

    Additional Information E 73 HC-3000 System Case A solid, lockable case that provides safe and stylish protection for the camera during transportation and storage. MA-100 Microphone Adapter/Shoulder Pad Allows you to use a mic. that has XLR connectors with the XL1, plus makes shoulder-mounted shooting possible. In addition, use it to attach a wirele ...

  • Canon XL1 - page 74

    Additional Information E 74 VL-10Li Battery V ideo Light This compact yet powerful video light can be used for both indoor and outdoor shooting. • Lithium ion battery packs can be used to power the light. Approximate usage times are as follows: BP-91 1 45 min BP-924 90 min BP-914 50 min BP-927 100 min BP-941 160 min Extender XL 1.6 × Attach this ...

  • Canon XL1 - page 75

    Additional Information E 75 380EX Speedlite Attaches to the XL1 to give SLR-style flash photography (the optional F A-100 Flash Adapter is also necessary). CH-900 Dual Battery Charger/ Holder This holds two battery packs and can charge them both consectively . It can then be connected directly to the XL1 using its DC Coupler to give twice the playb ...

  • Canon XL1 - page 76

    Additional Information E 76 Finding Y our W ay Ar ound the XL1 LIGHT Remote sensor (p. 21) Tally lamp (p. 21) Accessory shoe (p. 43) Stereo microphone (p. 12) Viewfinder cable (p. 67) Zooming ring (p. 25) Focusing ring (p. 44) Lens hood (p.9 ) EXP. LOCK button (p. 45) IRIS wheel (p. 34, 45) EYE POINT SELECT switch (p. 11) Eye cup (p. 10) REC LEVEL ...

  • Canon XL1 - page 77

    Additional Information E 77 AE Shift dial (p. 46) Audio LCD panel (p. 84) Remote sensor (p. 21) Tally lamp (p. 21) AUDIO 2 RCA jack (R) (p. 60) AUDIO 2 RCA jack (L) (p. 60) EJECT button (p. 15) BATT. RELEASE button (p. 13) Microphone cable (p. 12) PHOTO button (p. 29) Zoom control (p. 25) Lens hood locking screw (p. 9) Grip belt (p. 17) Start/stop ...

  • Canon XL1 - page 78

    Additional Information E 78 T W PHOTO START/STOP HOLD REC SHUTTER REC SEARCH EVF DISPLAY ON/OFF D.EFECT SELECT ON/OFF Zoom control (p. 25, 65) START/STOP button (p. 23, 65) HOLD lever (p. 65) PHOTO button (p. 29, 65) PAUSE button (p. 52) STOP button (p. 51) REW button (p. 51) REC button (p. 58) FF button (p. 51) PLAY button (p. 51) Viewfinder focus ...

  • Canon XL1 - page 79

    Additional Information E 79 PHOTO SELF TIMER WT ZOOM START/ STOP AUDIO MONITOR REVERSE FORWARD JOG SHUTTLE DATA CODE ON SCREEN MENU MIX BALANCE PHOTO SEARCH ST-2 ST-1 REW PAUSE SLOW PLAY STOP FF 2 + START/STOP button (p. 23) SELF TIMER button (p. 42) ON SCREEN button (p. 80) MENU button (p. 19) cursor key (p. 19) cursor key (p. 19) AUDIO MONITOR bu ...

  • Canon XL1 - page 80

    Additional Information E 80 Screen Displa ys T o display the date and time on a connected TV , press the wireless controller ’ s DA T A CODE button when the camera is in VCR mode with a tape loaded. Press the wireless controller ’ s ON SCREEN button to see the other displays on the TV screen. (The displays appear white on-screen.) They will not ...

  • Canon XL1 - page 81

    Additional Information E 81 F 1/ 12 0 0 :A M JA N 2.8 1997 500 . .1 LE N S Playback pause (forward and reverse) (p. 52) Slow playback (forward and reverse) (p.53) × 2 playback (forward and reverse) (p. 53) × 1 playback (forward and reverse) (p. 53) Photo Search (p. 55) Photo search is complete Zoom display (p. 25): Optical zoom Optical plus digit ...

  • Canon XL1 - page 82

    Additional Information E 82 The 16:9 effects: the display flashes when the effect hasbeen selected, and appears steadily when it is activated (p. 41). Digital effects: the display flashes when the function has being selected and appears steadily when it is activated (p. 40). Slow shutter effects can not be selected at this time (p. 35) The camcorde ...

  • Canon XL1 - page 83

    Additional Information E 83 Appears when the battery pack is exhausted (p. 14, 62). Appears when the tape has reached the end. Refer to page 16. Appears when you press the 2 (record) button if the DV cable is not connected properly (p. 58). Refer to page 68. Appears as a warning to protect the tape and also when condensation is detected. Remove the ...

  • Canon XL1 - page 84

    Additional Information E 84 Main LCD panel A udio LCD panel 0 2 6 20 40 30 ST - 1 MIX ST - 2 50 R L -d B 1 2 M A N U PB PB Recording mode (p. 24) Exposure lock (p. 45) F number (aperture siz e) (p. 34) A udio mode (p. 36) L, R Recording le vels (p. 38) Shutter speed (p. 34) Remaining battery power (p. 62) Time code (p. 83) Cassette: set for erasure ...

  • Canon XL1 - page 85

    Additional Information E 85 Specifications XL1 Power Supply (rated): 7.2 V DC Power Consumption (while r ecording, AF=ON): 9.5 W (Approx., recording with the AF turned on) T elevision system: EIS standard (525 lines, 60 fields) NTSC color signal V ideo recording system: 2 rotary heads, helical scanning system DV system (Consumer digital VCR SD syst ...

  • Canon XL1 - page 86

    Additional Information E 86 Index Å Abroad, Using the Camera, 67 Accessories, 6, 73 Adapter , AC, 13 AE Programs, 32 AE Shift, 46 Audio Input, 37 Audio Output, 60 Audio/V ideo T erminals, 56 Auto, 33 Autofocus, 44 ı Backup Battery , 63 Basic Recording, 23 Battery Pack, 14 Ç Cables, 6, 56 Cassettes, 15 Charging the Battery Pack, 14 Choosing a Rec ...

  • Canon XL1 - page 87

    CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED W ARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon digital video equip ...

  • Canon XL1 - page 88

    U .S.A. CANON U .S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U .S.A., INC. CHICA GO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U .S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway , Irvine, CA 92718 USA CANON U .S.A., INC. HONOLULU OFFICE 1020 Auahi Street, Bldg. #8, Honolulu, HI 96814 USA ● If you ha ve ...

Manufacturer Canon Category Camcorder

Documents that we receive from a manufacturer of a Canon XL1 can be divided into several groups. They are, among others:
- Canon technical drawings
- XL1 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon XL1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon XL1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon XL1, service manual, brief instructions and user manuals Canon XL1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon XL1.

Similar manuals

A complete manual for the device Canon XL1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon XL1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon XL1.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon XL1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon XL1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon XL1, that we can find in the current document
3. Tips how to use the basic functions of the device Canon XL1 - which should help us in our first steps of using Canon XL1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon XL1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon XL1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon XL1?

Use the form below

If you did not solve your problem by using a manual Canon XL1, ask a question using the form below. If a user had a similar problem with Canon XL1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)