Manual Speco Technologies 4HD

93 pages 6.82 mb
Download

Go to site of 93

Summary
  • Speco Technologies 4HD - page 1

    User Guide (V er . 1.3 ) Model: DVR4HD 4 Channel HDcc tv Digit al V ideo Recorder About This Use r Guide Prior to inst allation, ca refully read the use r g uide. Be sure to keep it handy for future reference . ...

  • Speco Technologies 4HD - page 2

    2 Safety Precauti ons Explanation of Graphi cal Symbols WARN ING To reduce a ris k of fire or electric shoc k, do not expo se this product to rain or moisture . CAUT I ON Changes or modifica tions not expressly approved by the manu facturer may v oid the user ‟s authority to operate this equi pment. CAUT I ON Risk of explosi on if battery is repl ...

  • Speco Technologies 4HD - page 3

    3 The se Precaut ions Must B e Followed For Sa fety Reasons. Warnin g  Do not use if the unit emits smo ke, strange sou nds are heard, or odo r is emitted.  Make sure the power cab le is not damaged .  Make sure the re is no dust ac cumulation on the pow er plug or the outlet.  Disassembly prohibited.  Do not place any foreign object ...

  • Speco Technologies 4HD - page 4

    4 Warning Install ation and servi cing should be per formed only by qualified and experien ced personnel. T urn of f the power of the DVR w hen connecting cameras, audio or sensor cabl es. The manufacturer is not r esponsibl e for any damage caused by improp er use of the product or failure to follow instructions for the produc t . T he manufacture ...

  • Speco Technologies 4HD - page 5

    5 Basic Function o f the MOUSE ① : Lef t button: SELE CT function ② Right button: Go to Sub M enu ① : Double clic k: Change Full Screen or S plit Screen Mounting the Hard Disk 1. Unfasten the cov er of th e unit. ...

  • Speco Technologies 4HD - page 6

    6 2. Fix the supplied HDD mounting brac ket to the har d disk using the supplied moun ting brac ket screws. 3. Insert the HDD brac k et to the hole and fix the screw . 4. Connect the supplied SA T A cable and pow er cable to the hard dis k . NOTE) HDD should be connected in the following order; HDD1/ O DD, HDD3, HDD4, HDD5, HDD6, HDD7, HDD 8. The D ...

  • Speco Technologies 4HD - page 7

    7 Specification ITEM Specification Video Input Channel Input Lev el 4 Channel HDc ctv 720p Video Lo ss Check YES Output Main Mon itor Output HDMI Sub Monitor Ou tput VGA S pot 1 Channel S pot Audio Input 4 RCA Output 1 RCA Audio Codec G .726 (ADPC M) Alarm Sensor Input 4CH, NC/NO Selec table Alarm Out 1CH out by Sen sor , Motion and Vide o Loss Ser ...

  • Speco Technologies 4HD - page 8

    8 S pecifications are s ubject to cha nge without no tice External S torage 1 e-SA T A SMART HDD Error Ch eck and Repor ting User Interface Menu Display Graphic User In t erface Input Method Mouse, Re mote Controller (Option ) and Keypad Networ k Acc ess PC Client Live, Search / Play back, Backup, P TZF Ca mera Control Web V iewer Live, Search / Pl ...

  • Speco Technologies 4HD - page 9

    9 Table of Cont ents 1. Name and Function ........................................................................................................... 11 1-1. Front Panel ................................................................................................................................... 1 1 2. Connection .............................. ...

  • Speco Technologies 4HD - page 10

    10 7-3. T ransferring S till Images or V ideo from the ARCHIVE List ............................................................ 42 7-4. Play back of Backup V ideo ............................................................................................................ 42 8. Upgrading Fi rmware ................................................... ...

  • Speco Technologies 4HD - page 11

    11 1. Name and Functio n 1-1. Front Panel The follow ing information w ill help you to operate the front panel con t rols. Figure 1.1.1 . Front p anel T able 2. 1.1. Indication lamp s Name Description POWER LED light is on w hen power is applied to the sy stem. Green – Power On, Orange – Pow er Off HDD LED light is on whe n the sy stem is recor ...

  • Speco Technologies 4HD - page 12

    12 Press to move right in the menu or to change the values in setup mode and to select. camera 2 in liv e mode. It is also used as the number 2 when enterin g passw ord. Press to move down t he m enu items in setup mode and to select camera 3 in live mode. It is also used as the nu mber 3 when entering p assword. Press to move left in the menu or t ...

  • Speco Technologies 4HD - page 13

    13 2. Connection Figure 2.1.1. Rea r Panel T able 2.1.1. Rear Panel Con nections NO Connection Purpose 1 VIDEO IN 4 BNC connectors for video in put. (HDcctv / HD -SDI) 2 A UD IO IN 4 connectors for audio input. 3 A UDIO OUT 1 connector for audi o output. 4 VIDEO OUT S pot output 5 VGA Connector for V G A monitor . 6 RS - 232 POS Interface 7 HDMI OU ...

  • Speco Technologies 4HD - page 14

    14 UNIT ID Reserve PIN for additional f eature 11 ETHERN ET RJ -45 connector for n etw ork function 12 E-SA T A T o archive still-image or video into an external storage HDD. Raid nits to be avai lable in the future . 13 Input V oltage Select input volt age acco rding to local electricity st andard 14 POWER SOCK ET Connect for AC1 10V~250V 3. Setti ...

  • Speco Technologies 4HD - page 15

    15 T able 3.1.1 . S etup Men u T ree  DISPLA Y – OSD – OSD CONTRAST – SEQUENCE – SEQ -D W ELL TIME – CHANNEL - NA ME  RECORD – CHANNEL - RESOLUTION - FRAME RA TE - QUALITY - RECORDING - SENSOR RECORDING - PRE RECORD - POST EVENT RECORD - AUDIO - SCHEDULE  DEVICE – ALARM OUT – PTZ – CHANNEL - MOTION ZONE - MOTION SENSITIVI ...

  • Speco Technologies 4HD - page 16

    16 – SET DA TE & T IME – NTP – SEND EMAIL  SECURITY – USER AUTHENTICA TION – USER P ASSO W RD  NETWORK – PORT – W EB POR T – NETWORK TYPE (DHCP , ST A T IC) – DNS – DDNS – CLIENT ACCESS – NETWORK STREAM  CONFIG  SA VE SETUP TO A USB  LOAD SETUP FROM A USB  LOAD DEF AUL T  LOAD F ACTORY DEF AUL T  ...

  • Speco Technologies 4HD - page 17

    17 3-2. Setup – Display Mode Press the SETUP button and enter t he passw ord. The setup menu is display ed as picture belo w . Select DISPLA Y icon and press SEL button to enter the setup menu item. Navigate t hrough the menu items using the control but ton ( ◀ ▲ ▶ ▼ ) and chan g e the v alue of the menu item usi ng the control button ( ? ...

  • Speco Technologies 4HD - page 18

    18 Figure 3.3.1. Rec ording Mode Setup Screen T able 3.3.1. Menu Items in Recording Mode Setup Menu item Description CHANN EL Select a channel for applying the following settings using the control button ( ◀ ▲ ▶ ▼ ). Press SEL button to change the setting value of all channels at once. O nce you select an item, then press SEL to set value f ...

  • Speco Technologies 4HD - page 19

    19 RECORDING Assign the recording mode for each channel. Options are: Continuous , B y Motion , B y Sensor , B y Schedule or Disable . SENSOR RECORDING Enable setting up to 4 sensors for the specified channel using the control button ( ◀ ▲ ▶ ▼ ). PRE REC ORD Enable/disabl e pre-event recording. Pre-event recording time is 15 seconds to 20 m ...

  • Speco Technologies 4HD - page 20

    20 setting for ev ery day . [ SUN to SA T ]: Move the cursor t o SUN to SA T and select a recording mode C,M or S using t he SEL button to set the same setting for the whole day . [ V ertical Bar “ | “ ]: Move the cursor to ALL and move the cursor to the specific time using the control button ( ◀ ▲ ▶ ▼ ). And select a recordin g mode C, ...

  • Speco Technologies 4HD - page 21

    21 Control the motion sensitivi ty from 1 to 9. KEY T O NE Enable/disabl e key tone. REMOTE CONT ROL ID Select an ID of remote c ontrol. 1. Select ID. 2. Press the same number as ID set in DVR on a remote contro l. 3. Then icon will be displayed on Live screen of DVR that respond to the re m ote control. The options are fr om 00 to 99 SENSOR Select ...

  • Speco Technologies 4HD - page 22

    22 ② P ress SEL button or dou ble click to ente r the menu. Then PTZ menu scree n is displayed. Figure 3.4.3. PT Z Control Setup Screen Note : For speed dome cameras that support RS-485, connect them directly to the RS -485 port. If the camera is controll ed with RS-232C, use a RS -485 to RS-232C signal converte r . On the PTZ control setup scree ...

  • Speco Technologies 4HD - page 23

    23 FULL ZONE : The motion sensor is activ e on the w ho le screen. P ARTIA L ZONE : The m otion sensor is a ctive in the set detection fra me. Select the senso r detection posi tion using the control bu tton ( ◀ ▲ ▶ ▼ ) and press the SEL button. Then the color of t he position which is selected will be changed. Press ESC button t o return t ...

  • Speco Technologies 4HD - page 24

    24 T able 3.5.1 . Menu Items in ST OR A GE Setup Screen Item Description OVER WRITE W hen enabled, the DVR will continue recording and overw r ite t he oldest existing recorded data once the hard drive is full. W hen disabled, recordi ng wil l stop once the hard driv e is full DISK FORMA T In order to use HD D format DISK INFO Hard drive in formati ...

  • Speco Technologies 4HD - page 25

    25 3-6. Setup – System Mode Press the SETUP butto n and enter the pas sword. The setup menu is displayed as picture below . Select SYSTEM icon and press SEL button to enter the menu item. Navigate through the m enu items using t he control button ( ◀ ▲ ▶ ▼ ) and change the value of the menu item using the control button ( ◀ ▲ ▶ ▼ ...

  • Speco Technologies 4HD - page 26

    26 SET DA TE&TIME Move the cursor to the display dat e and t ime using the control button ( ◀ ▲ ▶ ▼ ) and press SEL button to set the present date and time. Press ESC button to return to SET DA TE & TIME setup menu . In order to set DA YLIGHT SA VING , select your DLS zone from USA , EU, or OTHER. CLIENT A CCESS Enable/Disabl e remo ...

  • Speco Technologies 4HD - page 27

    27 3-7 . Setup – Security Mode Press the SETUP butto n and enter the passw ord. The setup menu is di splayed as picture below . Sel ect SECUR ITY icon and press SEL button to enter the setup menu item. Navigate through the menu items using t he control button ( ◀ ▲ ▶ ▼ ) and change the value of the menu item using the control button ( ◀ ...

  • Speco Technologies 4HD - page 28

    28 ▼ ) and SEL button. Enter the current passw ord and select OK. Enter the new password and select O K. Enter the same passw ord again to confirm and select OK. T hen the message “ PA SS W ORD CHANGED ” is display ed. The factory de fault pass word is 1111 . 3-8 . Setup – Network Mode Press the SETUP button and enter the pas sword. The set ...

  • Speco Technologies 4HD - page 29

    29 ST A TIC Assigned t o an Internet service provider ( I SP ) to be its permanent address on the Internet. DDNS Enable/disabl e using domain nam e address through DDNS server . “ ON ” mode, DDNS serv er name appea rs for dom ain registration. DDNS SER VER NAME : T he DDNS sever name is bestddns.com . CAUT I ON : Do not change th is sever name. ...

  • Speco Technologies 4HD - page 30

    30 T able 3.8.2. LAN Item Description IP The fixed IP address of the DVR unit. SUBNET MASK The subnet mas k for the LA N GA TEW A Y The IP address of the Gatew ay 1 st DNS The address for the DNS serv er 2 nd DNS The address for the DNS serv er 3-8-2-2 . DHCP An IP address is automatically assigned by the DHCP server , which automatically assigns I ...

  • Speco Technologies 4HD - page 31

    31 3-9. Setup - CONFIG Mode Press the SETUP button and enter the passw ord. The setup m enu is display ed as picture below . Select CONFIG icon and press SEL button t o enter the setu p menu item. Navigate through the menu items using the control button ( ◀ ▲ ▶ ▼ ) and change the value of t he menu item using the control button ( ◀ ▲ ? ...

  • Speco Technologies 4HD - page 32

    32 3- 10 . Setup – QUICK SETUP M ode User can easily recording setup . just select desi red day/day s to record, th en DVR w ill automatically calculate recordin g setting v alue. 4. Saving Setup T o prese rve the setup v alues that you hav e changed, selec t YES . ...

  • Speco Technologies 4HD - page 33

    33 5. Live, Search, and Play back 5-1. Live Viewing Screen In the Live screen, vide o inputs from the cameras are display ed as t hey are configured in the Display Setup screen. V arious on-screen display (OSD) symbols, which indicate the status of the DVR, are described in T able 5.1.1 . Figure 5.1.1. Liv e V iewing Screen T able 5.1.1. St atus In ...

  • Speco Technologies 4HD - page 34

    34 SEA RCH Press to go to the search menu. Event search / T ime line search /Lo g /Archiv e search A RCH Press to capture a still image. The st ill image will be stored into hard drive. It can be trans ferred to the US B device. SETUP Press to launch SETUP menu. ESC Press for temporal storage of the changed value or to return to the previous menu s ...

  • Speco Technologies 4HD - page 35

    35 How t o Search Dat a On the Time-Line Usi ng the Mouse or Front Key Button ① 1 hour moving : 1-hour time bar(M ouse)/ F/REW and F/ADV button (Front key) ② 5 minu te moving : ◀ 12:00:00 ▶ (Mouse) / control button ◀ ▶ (Front key) 5-2-1. Time-Line Search The TIME-LINE search window is used to find th e stored vide o by using the time li ...

  • Speco Technologies 4HD - page 36

    36 1. Select the date of the video to begin searching and navigate throu g h the days usin g the control button ( ◀ ▲ ▶ ▼ ). 2. Once you have selected the date, press the SEL button to move to the tim e line search w indow . 3. Use the control bu t ton ( ◀ ▲ ▶ ▼ ) to select a ti me zone on the 24 hours time t able. 4. Select All or ...

  • Speco Technologies 4HD - page 37

    37 6. Once you have selected the t ype of recording to search for , press SEL to produce a list of instances that fit your sea rch criteria. 7. Use the control bu t ton ( ◀ ▲ ▶ ▼ ) to scroll through the on-screen li stings. 8. Use t he control button ( ◀ ▲ ▶ ▼ ) t o display a list of event s that happened previous to or aft er the c ...

  • Speco Technologies 4HD - page 38

    38 5-3. Play mode During playba ck of a rec orded event, the m ode changes fr om SEARCH to PLA Y . W hile in PLA Y mode, you may return to the SEARCH screen by pressing t he ESC button. Figure 5.3.1. PLA Y Mode Screen T able 5.3.1. Button Functions in PLA Y M ode Button Description ESC Return to the previous menu screen , search li st, or exi t men ...

  • Speco Technologies 4HD - page 39

    39 6. P TZ Control T o control the PTZ functions of t he camera, select MEN U and PTZ on the screen using the mouse or press the PTZ but ton on the fron t panel . Figure 6.1.1 . PTZ Con trol Screen T able 6.1.1. Button Functions in P TZ C on trol Item Description P AN / TIL T Select P AN/TIL T usin g the control but ton ( ◀ ▲ ▶ ▼ ) and pres ...

  • Speco Technologies 4HD - page 40

    40 User can set the p r eset number in the tour group of the OSD m enu. OSD Select the OSD to enter the menu. Cont rol keys are Right, Left, UP , Do wn, Select, Far (REW KEY), and Near ( FF KEY) . Press the ESC button to return to the main menu. Press the PTZ b utton to escap e from the OSD menu. A UTOSCA N Press the right key ( ▶ ) on the cont r ...

  • Speco Technologies 4HD - page 41

    41 7. Back Up 7-1 . S till Image Backup onto USB Flash Driv e S till images can be capt ured and archived onto the USB flash drive in live mode or whil e playi ng back recorded vide o. In live mode, press t he BACKUP button to launch the archiv e function or select MENU and BAC K UP on the screen using the mo use. Figure 7.1.1. S till Image Archiv ...

  • Speco Technologies 4HD - page 42

    42 Figure 7 .2 .1 . Video A rchiving and Backup Scre en T he DVR wi ll convert the correspondi ng portion o f the vi deo into an A VI file. 7-3. T ransfe rring Still I mages or Video from the ARCHIVE List The stored data on t o hard driv e will be found in the ARCHIVE list in SEA RCH window . User can back up s t ill im ages or video into the s tor ...

  • Speco Technologies 4HD - page 43

    43 Figure 7.4.1 . HD Player ...

  • Speco Technologies 4HD - page 44

    44 8. Upgrading Firmware In order to upgrade , the firmware upgrade file must first be downloade d and copied into the USB flash drive . Create a new f older in the USB f lash drive and name it “upgrade” . Copy the firmware upgrade f ile into the “upgrade” folder . NOTICE The folder on the USB flash driv e must be name d “ upgrade ” . A ...

  • Speco Technologies 4HD - page 45

    45 9. Network A ccess Using the Single-Site N et work V iewer The DVR provides a live r emote monitorin g feature. Remote m onitoring requires installatio n of the network view er on your PC. NOTICE In a high bandwid th network, a maximum of four users can access one DVR simultaneously . In a low bandwid th network it is recommended that only one u ...

  • Speco Technologies 4HD - page 46

    46 4. The setup sta tus screen is displayed . After the ins tallation is completed, “ S pecoT ech Client ” icon is display ed on t he des ktop. 9-3. Live Monitoring Mode and Functions. ...

  • Speco Technologies 4HD - page 47

    47 Button Function Description DA TE & TIME Displays the cu rrent date and time. CONNECT / DISCONNECT Connect/disconnec t networ k connection.. SEA RCH Switches the liv e m ode to search mode. DISPLA Y MODE Select a channel and screen display mode. P AN/T IL T /Z OOM/ FOCU S Control the P AN/TIL T/ ZOOM/FOCU S features on the re m ote camera. C ...

  • Speco Technologies 4HD - page 48

    48  QUAD/-screen displ ay - Cli ck the QUAD button t o switch to qua d-screen displ ay  Full screen display - Click the r ight button o f the mouse and choose the Full Scr een butto n to display only screen and hidden the operation p anel. Image Capture of Live Screen S till-image of liv e scr een can be captur ed and sav ed as BMP or JPEG fi ...

  • Speco Technologies 4HD - page 49

    49 9-4 . Bi -Directional A ud io T he UM S Clien t allows f or bi direc tional audio between the client and a dvr unit. On the PC, to use bi directional audio, you will need a sound card of handli ng a microphone and speakers. On t he dvr side, you will need t o connect a microphone to the aud io in connection, and a pair of amplified speakers to t ...

  • Speco Technologies 4HD - page 50

    50 MARK IN Set the star t t ime for video backup. MARK OUT Set the endin g time for vi deo backu p. BACKU P Backup the selected recorded video as A VI format. SEA RCH CALENDA R The calen dar show s dates with recorded video in a light blue and the selected date in dark blue. TIMELINE BA R The timeline shows recorded data in dark blue on the bar . P ...

  • Speco Technologies 4HD - page 51

    51 3. Drag the slid on the time scal e and drop it betw een 0 to 24. 4. Press the PLA Y butt on. Then the video recorded in the remote DVR is played back per each channel that you choose by HD image... Backup of V ideo in the Remote DVR V ideo recorded in the remote DVR cab be backe d up on the PC HDD as A VI format. 1. Connect the ne twork to the ...

  • Speco Technologies 4HD - page 52

    52  S tart time / S top time: Backup time can be chan ged.  File path: Shows the fol der that the bac k up file is recorded .  Channel: Show s backup channel .. 9-6. PC System Configuration Click the SE TUP button. T hen the Setup dialog is display ed. Setting General Set the Security Option , S ave Path, and M iscellaneous.  Security O ...

  • Speco Technologies 4HD - page 53

    53  Display network statis tics : If a user selects this function, the client S/W will display network status, Bit rate and Fra me rate.  T ime Format : Change the mode the Clien t software di splays the time . Setting Site The remote DV Rs can b e added, modified, and remove d. Setting Even t Set the record p ath and the size of local dis k ...

  • Speco Technologies 4HD - page 54

    54 Setting Record Set the recordin g conditions and select channels to record . Select the local disk to use and the amount of disk space you want to allow the progra m to use for recording. ...

  • Speco Technologies 4HD - page 55

    55 10. Network A ccess Using the M ulti-S ites N et work Vie wer 10 -1. Inst al ling the Network Sof tware 1. Insert the prov ided CD in the CD drive and doubl e-click “ S pecoT ech_HDcctv_M ulti_Client (XXXX) .exe ” 2. Select a destination folder and click “ Next ” . 3 . Select the program folde r and click “ Next ” . 4. The setup s ta ...

  • Speco Technologies 4HD - page 56

    56 5. Afte r the instal lation is compl eted, “ S pecoT ech Multi C lient ” icon display s on t he des ktop screen. 10 -2. Live Window When install ation is com pleted, double click the “ SpecoT ech Multi Client ” icon on your desktop to start the program. 10 -2-1. Main user inte rf ace 10 -2-2. Control bu ttons Button Description LOCAL PLA ...

  • Speco Technologies 4HD - page 57

    57 SITE MA NAGEME NT THUMBN AIL REFR ESH: Click this icon to refresh and renew thumbnail image o f every connected site. SITE ADDITION: Click this icon to open „ Site Addition ‟ window . SITE DELETE: Click this icon to delete site from the index window , after discon nect a site. SITE MODIFY : Select the site from the index wi ndow and click th ...

  • Speco Technologies 4HD - page 58

    58 CHANN EL SPLIT T o select the numbers of display channel /channels (Single, quad, 9 channels, and 16 channel s) of highlighted site. DVR SITE SPLI T T o select the numbers of DVR/DVR s (1 DVR, 4 DVRs, 9 DVRs, 16 DVRs) on main display screen. 10 -3. Search and Play back Window 10 -3-1. Main user inte rf ace Y ou can access to search window by cli ...

  • Speco Technologies 4HD - page 59

    59 10 -3-2. Main control pan el Button Description LOCAL PLA YBACK Click t his icon to run a playback window t o search and play videos that are recorded i n local PC. REMOTE PLA YBACK Click t his icon to run a playback window to search and play videos that are recorded i n remote DVR. ...

  • Speco Technologies 4HD - page 60

    60 Directory w indow show s site/sites that are pre-regi stered. CONNECT Cli ck this icon to connect the selected si te/sites. DISCONNECT Click this icon to disconnect the s elected site/si t es. SETUP Click this icon to setup c onfiguration of UMS MUL TI CLIENT . CAPTURE Click this icon to capture a stil l image. EVENT LIST MARK IN Click this icon ...

  • Speco Technologies 4HD - page 61

    61 The calendar show s dates with recorded vi deo in color . T o display the record ed data o f selected channel or all channels on a time line scal e. T o change a time line scale from 24 hours to 60 minutes or vise versa. The timeline shows recorded data in color on the bar . Y ou can adjust the time line scale and move it t o the t ime you wish ...

  • Speco Technologies 4HD - page 62

    62 10 -4- 1. General 10 -4-1-1. Security Option: Set a p assword for security options. Select security options and set a p assword. Then when y ou access any of selected functions, you need to enter the p assw ord. Y ou can also set the sav e path for captu r ing and backup. 10 -4-1- 2. Save Path : S pecify the location to save captured still image ...

  • Speco Technologies 4HD - page 63

    63 10 -4-2. Event Event log can be archived and sea rched. 10 -4-2- 1. A rchiving Event Log: Specify the l ocation to save ev ent logs an d select ev ent to archiv e. 10 -4-2-2. A rchiving Event Log: Event lo g can be searched from selected time. ...

  • Speco Technologies 4HD - page 64

    64 10 -4-3. Record 10 -4-3-1. Record Setup: Y ou can set the recording conditions for Always, Event, or Auto record. And you can also select t arget DVR/DVRs and chann el/ch annels. When you set the recording condition to even t, you can set event for motion or alarm wi th duration. 10 -4-3-2. Record Local Storage Setup: Y ou can select the local d ...

  • Speco Technologies 4HD - page 65

    65 10 -4-4 . OSD Y ou can select the OSD to be display 10 -4-5 . About “About” provides netw ork client version informa tion. ...

  • Speco Technologies 4HD - page 66

    66 10 -5 . Remote Setup The menu settings for the DVR unit can be set from a PC, vi a network. This f unction will be supported to the next version. Put the cursor of the mouse on the channel which is connected to the site and press the right. Then the following wi ndow is display ed. Select the Remote Setup . Then the setup window is displayed. Th ...

  • Speco Technologies 4HD - page 67

    67 10 -5-1. Setting the Di splay Select Display t o set the liv e video display conditions 10 -5-1-1. General Settings These settin gs apply to a ll channels. OSD : Sets whether to di splay or not date and time as w ell as channel number on the screen . Sequence : Settin g for automa t ically switching the displ ayed video. Seq-Dwell T ime : Sets t ...

  • Speco Technologies 4HD - page 68

    68 10 -5-2 . Reco rd Select Record to set the recordi ng conditions. 10 -5-2-1. Common to A ll Channels Resolution : Set s the re solutio n for the recordings . The se t value applies to all channels. 10 -5-2-2. Channel-S pecific Settings These settin gs apply to the speci f ied channel only . Channel Designa tion Frame Rate : Set s the recording r ...

  • Speco Technologies 4HD - page 69

    69 A udio : Sets whether to perform or not audio recor ding. Post Event Rec ord : Set s t he dura tion of the ev ent recording. Schedule : Set s the sche dule for schedule recording. 10 -5-3 . Devi ce Select Device to set the sensor inpu t/ alarm outpu t conditions , PTZ control and spot settin g conditions. Setting a Sensor Input T erminal : S pec ...

  • Speco Technologies 4HD - page 70

    70 Sensor In : Output s an alarm signal w hen the specified external senso r input termina l receives an in put. Motion On : Outputs an alarm signal when the specif ied video input term inal receives a motion detection signal. V ideo Loss On : Outpu ts an alarm signal w hen a vi deo loss occurs in the speci fied video input terminal. A larm Duratio ...

  • Speco Technologies 4HD - page 71

    71 Setting the SPOT : Set s the ou t put conditions o f the spot v ideo terminal . S pot T ype : Sets the outpu t screen layout o f the spo t terminal. S pot On Event : Se ts whe ther to output or not the video of a sensor recording to spot while it is bein g recorded. S pot Event D w ell T ime : Sets the output duration o f the sensor reco rding v ...

  • Speco Technologies 4HD - page 72

    72 10 -5-4 . S torage Select Storage to configure continued recording settings by overwriting the hard d isk and the storage period for the recordi ng da ta. Overwrite : T o continue reco rding by ov erwriting w hen t he hard disk beco m es full, chec k the chec kbox. Record Limit : Set s whether to limit or not the rec ording data storage period. ...

  • Speco Technologies 4HD - page 73

    73 10 -5-5 . System Select Sy stem to set system and t ime settin g s. Setting the Sy stem Client A ccess : T o g ive permission to ope rate from an external PC by checkin g the checkbox. Bandwid th Saving : Set s if the network bandwidth is not large enough when monitoring liv e videos by checking the chec k box. Liv e videos advance frame by fra ...

  • Speco Technologies 4HD - page 74

    74 OTHER : Sets the start and end dates of the dayli ght saving period f or time zones other t han USA and EU. (Begin/End) (Memo: A confirmation dial og is displayed when [ Apply] or [ok] is clicked if the date and /or time settings have been changed. The DVR is restarted and the date and time updated when [YES] is clicked on the confirmation dial ...

  • Speco Technologies 4HD - page 75

    75 Setting the Send E - Mail : This setting is used to automa tically send a notification e-mail to a spe cified address w hen an alarm occurs. (Memo: The DVR w ill be forcibly restar ted if a value on this screen is changed.) Send E-Mail : Set s w hether to enable/disabl e e-mail sendi ng function. IP Noti fication : T o send a noti f ication e-ma ...

  • Speco Technologies 4HD - page 76

    76 Setting the NT P : It allows synchroni zing the ti me using an inte r net of LAN NTP server . NTP : S ets whether to synchroni ze the time u sing NTP server or not. Primary SNTP Server : Input the NTP primary serv er address. Secondary SNTP Server : Input the NTP secondary server address. T ime Zone : Select the time zone. Connection Mode : Sele ...

  • Speco Technologies 4HD - page 77

    77 10 -5-6 . Securi ty Select Secur ity to set p assword check for user authentication for the speci fic functions such as SETUP , PLA YBACK, PTZ control, REC ORD OFF , PLA YBACK ON/OFF and NE TW ROK connection. C heck ing the checkbo x : Ask for a pas sword w h en the given function is selected for all users ...

  • Speco Technologies 4HD - page 78

    78 10 -5-7.Network Select Net work t o set information about the DVR netw ork. (Memo: If a v alue on this screen is changed, the DV R will be restarted .) Port : When connec t ing multipl e DVRs to the ne twork, set a unique por t number to each DV R. Web Port : Set a w eb server port numbe r . Network T ype LAN : T he address set ting mode is manu ...

  • Speco Technologies 4HD - page 79

    79 10 -5-8. Network – Dual S tr eam Select Dual S tream t o set frame rate and quality for a netw ork streaming. User can set to t he followi ng values. NTSC P AL 4ch Frame Rate 1,2,3,7,10,12 and 15fp s 1,2,3,6,8,9 and 12fp s Quality S tandard, High, Ultra S tandard, High, Ultra 8ch Frame Rate 1,2,3 and 7f p s 1,2,3 and 6f p s Quality S tandard, ...

  • Speco Technologies 4HD - page 80

    80 10 -6. Operation 10 -6-1. Addition, Del ete, and modify of DVR sites 10 -6 -1-1. A ddition of sites 1. Click SITE ADDITION button. And then the fol lowing wi ndow displays. o T ype : Choose the product ty pe o Site Name: Input a na me that properly describes a site. o IP Address: Input IP address (Public I P address of a r outer that DVR is conn ...

  • Speco Technologies 4HD - page 81

    81 10 -6 -1-2. Delete of Sites 1. Select the site /sites to delete from the di rectory w indow . 2. Click SITE DELETE button. And then the sele cted site/sites is/are deleted. 10 -6 -1-3. Modify of Sites 1. Select the site /sites to modify from the directory w indow . 2. Click SITE MODIFY butt on. And then the follo wing window displays. 3. Click O ...

  • Speco Technologies 4HD - page 82

    82 10 -6-2. Connect and Disconnect 10 -6 2-1. Connect 1. Select site/sites to conne ct from the di rectory wind ow . 2. Click CONNECT button, and then site/sites displ ays/display as connected. ...

  • Speco Technologies 4HD - page 83

    83 10 -6 -2-2. Disconnect 1. Select site/sites to dis connect from the directory window . 2. Click DISCONNECT button, and then selected site/sites discon nected . ...

  • Speco Technologies 4HD - page 84

    84 10 -6-3 . S till-image capture durin g Live 1. Double-clic k a channel to capture fr om the disp l ay screen. (Otherw ise all channel s will be captu red.). 2. Click CAPTURE butto n. And then a Cap ture window displ ays. 3. Set Save p ath, File Name, and File Fo r mat. And then cli ck OK button. 4. S t ill ima ge is saved as set in Capture wi nd ...

  • Speco Technologies 4HD - page 85

    85 10 -6-4 . Reco rding video on l ocal PC durin g Live 1. Click SETUP button. And then a setup w indow display . 2. Select Record and set the values. 3. Select Dis k and set the val ues. 4. Click RECORD ON button . And the color of button is chan g ed. 5. Live video data is recorded as set in Record and Disk setup. These video data can be searc he ...

  • Speco Technologies 4HD - page 86

    86 10 -6-5 . Local Play back and Remote Playba ck 10 -6-5-1. Play back of Recorded V id eo on Local PC 1. Click LOCAL PLA YBACK button . And then Playba ck Window display over Liv e Window . 2. Select site/sites to conne ct from the di rectory wind ow . 3. Click CONNECT button. And then Green bar displays on Search calendar and slide window . 4. Mo ...

  • Speco Technologies 4HD - page 87

    87 10 -6 -5-2. Play back of Recorded V ideo on Remote DVR 1. Click REMOTE PLA YBACK button. And then Play back W indow display o ver Live Window . ...

  • Speco Technologies 4HD - page 88

    88 2. Select site to connect fro m the directo ry wi ndow . 3. Clic k CONNECT button. And then Green bar displays on Search calendar and slide window . 4. Mov e scroll bar on w here there is vide o data a nd Play button. 5. Vi deo data that is reco rded on a remo te DVR is pl ay-backed. ...

  • Speco Technologies 4HD - page 89

    89 10 -6-6 . A VI Backup durin g playback Y ou can back up the recorded vi deos in A VI format during play back . 1. Double-clic k the tar get channel to bac kup. 2. Select the be ginning time by usi ng the search c alendar and slide ba r . 3. Click MARK IN button, when the scale of the timeline is located on the tar get time as the beginning time ...

  • Speco Technologies 4HD - page 90

    90 6. Y ou can also set the beginning time and ending time on this window . After selecting a channel for backup, click the OK but ton. The backup will begin. 7. A VI video data is r ecorded as set in A VI Backup w indow . A VI format video can be pl ayed bac k b y W indo w Media Play er ™ or other media play er that is comp atible w ith A VI for ...

  • Speco Technologies 4HD - page 91

    91 11. Network Access Using the 3G App V iewer 11 -1. Installi ng the 3G App V iewer 1. En ter the Apple App S tore (For Apple iPhone Users) or the Android Market (For Android Ph one users) 2. Search “ S peco V iewer ” in the App S tore ⓒ or the Android M arket ⓒ 3. Install the “ S peco V iewer ” app. 11 -2. Live Moni toring 1. Open the ...

  • Speco Technologies 4HD - page 92

    92 2. Select the in t he top ri ght corner for “ Site Infor mation ” 3. Input the “ Site Informati on ” and select to save th e “ Site Infor mation ” 4. Select the saved site fro m “ My Site List ” 5. Select a channel to view . 6. After selec ting a channel, the app w ill display the following channel. ...

  • Speco Technologies 4HD - page 93

    93 Notice 3G Data Usa g e applied without W i-Fi connection. Please check w ith your Phone Carrier . ...

Manufacturer Speco Technologies Category DVR

Documents that we receive from a manufacturer of a Speco Technologies 4HD can be divided into several groups. They are, among others:
- Speco Technologies technical drawings
- 4HD manuals
- Speco Technologies product data sheets
- information booklets
- or energy labels Speco Technologies 4HD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Speco Technologies 4HD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Speco Technologies 4HD, service manual, brief instructions and user manuals Speco Technologies 4HD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Speco Technologies 4HD.

A complete manual for the device Speco Technologies 4HD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Speco Technologies 4HD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Speco Technologies 4HD.

A complete Speco Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Speco Technologies 4HD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Speco Technologies 4HD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Speco Technologies 4HD, that we can find in the current document
3. Tips how to use the basic functions of the device Speco Technologies 4HD - which should help us in our first steps of using Speco Technologies 4HD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Speco Technologies 4HD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Speco Technologies 4HD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Speco Technologies 4HD?

Use the form below

If you did not solve your problem by using a manual Speco Technologies 4HD, ask a question using the form below. If a user had a similar problem with Speco Technologies 4HD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)