-
Cisco Systems 274 - page 1
Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco Wide Area V ir tualization Engine 27 4 and 47 4 Hardw are Installation Guide November 20 08 Text Part Number: O L-17739-01 ...
-
Cisco Systems 274 - page 2
THE SPECIFICA TIONS AND IN FORMA TION REGA RDING THE PRODUCTS IN THIS MAN U AL ARE SUBJECT TO CHANGE WITHOUT NO TICE. ALL ST A TEMENTS, INFO RMA TION, AND RECOMMENDA TION S IN THIS MANUAL ARE BELIEVED TO BE A CCURA TE BUT ARE PRESENTED WITHOUT W ARRAN TY OF ANY KIN D, EXPRESS OR IMPLIED . USERS MUST T AKE FULL RESPONSIBILITY FOR THEIR APPLICA TION ...
-
Cisco Systems 274 - page 3
All other trademarks mentioned in this docu ment or website are the property o f their respecti ve owners. The us e of the word partner does not imply a partnership r elationship be tween Cisco an d any other company . (0809R) Any Internet Prot ocol (IP) addre sses used in thi s document are n ot intended to be actual ad dresses. Any examples, comm ...
-
Cisco Systems 274 - page 4
...
-
Cisco Systems 274 - page 5
v Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 CONTENTS Preface ix CHAPTER 1 Introducing the Ci sco Wide Area V irtualization Engine 1-1 Supported Products 1-1 Hardware Features 1-2 Front Panel Controls a nd LEDs 1-2 Location of Ports and Connectors 1-3 CHAPTER 2 Preparing to Install the Wide Area Virtua ...
-
Cisco Systems 274 - page 6
Contents vi Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Checking the LEDs 3-7 Removing or Rep lacing a WAVE Appl iance 3-7 CHAPTER 4 WAVE Inline Network Adapter 4-1 Inline Network Ad apter Description 4-1 Ports and LED Indicators 4-3 Inline Network Ad apter Cabling Requirements 4-4 Installation Scenar ...
-
Cisco Systems 274 - page 7
vii Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Contents APPENDIX B Maintaining the Wide Ar ea Virtualization E ngine B-1 Maintain ing Your S ite Environm ent B-1 Temperature B-2 Humidity B-3 Altitude B-3 Dust and Pa rticles B-4 Corrosion B-4 Electrostatic Discharge B-4 Electromagnetic and Radio Frequ e ...
-
Cisco Systems 274 - page 8
Contents viii Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 ...
-
Cisco Systems 274 - page 9
ix Cisco Wide Area Virtualiz ation Engine 274 and 474 Hard ware Installation Guide OL-17739-01 Preface This preface describes the purpose of the Cisco W ide Ar ea V irtua lization Engi ne 274 and 474 Har dware I nstallation Gui de , who should read it, ho w it is or ganized, and its document con ventio ns. This preface contains the follo wing secti ...
-
Cisco Systems 274 - page 10
Preface x Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Audience T o use this installation guid e, you should be fami liar with internetworki ng equipment and cabling, and h av e a basic kno wledge of electronic circuit ry and wiring practice s. T o complete the installation, includ ing the softw are co ...
-
Cisco Systems 274 - page 11
xi Cisco Wide Area Virtualiz ation Engine 274 and 474 Hard ware Installation Guide OL-17739-01 Preface Conventions Command descriptions use the fo llowi ng con ventions: Chapter 5 T roubleshooting the System Hardware Describes troubleshooting procedures for the hardware installation. Appendix A W ide Area V irtualization Engine Hardware Specificati ...
-
Cisco Systems 274 - page 12
Preface xii Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Screen examples use the follo w ing con ventions: Notes, cautionary statem ents, and sa fety warnings use these con ventions: Note Means reader take note . Notes contain helpful suggestions or references to materials not co ntained in this manual ...
-
Cisco Systems 274 - page 13
xiii Cisco Wide Area Virtualiz ation Engine 274 and 474 Hard ware Installation Guide OL-17739-01 Preface War ni ng IMPORT ANT SAFETY INSTRUCTIONS This warning symbol m eans danger . Y ou are in a situation that could cause bodily injury . Before you work on any equipment, be aware o f the hazards involved with electrical circuitry and be familiar w ...
-
Cisco Systems 274 - page 14
Preface xiv Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 ...
-
Cisco Systems 274 - page 15
xv Cisco Wide Area Virtualiz ation Engine 274 and 474 Hard ware Installation Guide OL-17739-01 Preface ...
-
Cisco Systems 274 - page 16
Preface xvi Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 ...
-
Cisco Systems 274 - page 17
xvii Cisco Wide Area Virtualiz ation Engine 274 and 474 Hard ware Installation Guide OL-17739-01 Preface ...
-
Cisco Systems 274 - page 18
Preface xviii Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Related Documentation The W A VE appliance supports the Cisco W ide Area Applicatio n Services software (W AAS). The W A VE appliance can functi on as either a W AAS Central Manager or as an Applicatio n Acceleration Engine. The Cisco W AAS sof ...
-
Cisco Systems 274 - page 19
xix Cisco Wide Area Virtualiz ation Engine 274 and 474 Hard ware Installation Guide OL-17739-01 Preface • Re gulatory Compliance and Safety Information f or the Cisco W ide Ar ea V irtualization Engines Obtaining Documentation, Obtaining Support, and Security Guidelines For info rmation on obtaining documentatio n, obtaining support, pro viding d ...
-
Cisco Systems 274 - page 20
Preface xx Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 ...
-
Cisco Systems 274 - page 21
CH A P T E R 1-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 1 Introducing the Cisco Wide Area Virtualization Engine This chapter pro vides a basic functional overvi e w of the Cisco W ide Area V i rtualization Engine (W A VE) 274 and 474 appliances an d describes the hardware, major components, and fr ...
-
Cisco Systems 274 - page 22
Chapter 1 Introducing th e Cisc o Wide Area Virtu alization Engine Hardware Featur es 1-2 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Hardware Features This section ill ustrates and describes the front and back panel cont rols, ports, and LED indicators on th e W A VE-274 and W A VE-474. It contains t ...
-
Cisco Systems 274 - page 23
1-3 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 1 Introducing the Cisco W ide Area Virtualization En gine Hardware Features The po wer control b utton po wers up and po wers down the system. Note Any USB connec tor can be u s ed to connect a keyboard , and the video conn ector can be used to con ...
-
Cisco Systems 274 - page 24
Chapter 1 Introducing th e Cisc o Wide Area Virtu alization Engine Hardware Featur es 1-4 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 War ni ng T o avoid electric shock, do not co nnect safety extra-low voltage (SEL V) circuits to telephone-network vol tage (TNV) circuits. LAN port s contain SEL V cir ...
-
Cisco Systems 274 - page 25
1-5 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 1 Introducing the Cisco W ide Area Virtualization En gine Hardware Features Ethernet Port Connector Connect a Categ ory 3, 4, or 5 unshielded twist ed-pair cable to the Ethernet connector . 100BASE- TX and 1000B ASE-T Fast Ethernet standards requir ...
-
Cisco Systems 274 - page 26
Chapter 1 Introducing th e Cisc o Wide Area Virtu alization Engine Hardware Featur es 1-6 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Console Port Serial Connector The W A VE-274 and W A VE-474 appliances hav e one console port (see Figure 1-4 ). Use the console port serial conn ector to connect to a ...
-
Cisco Systems 274 - page 27
CH A P T E R 2-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 2 Preparing to Install the Wide Area Virtualization Engine This chapter contains i mportant safety information that you sh ould kno w before working with th e W A VE appliance. Use the guidelines in this chapter to ensure your o wn personal sa ...
-
Cisco Systems 274 - page 28
Chapter 2 Preparing to Install the Wide Area Virtualiz ation Engine Safety Warnings 2-2 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 War ni ng Read the installation instruc tions before connecting the sy stem to the power source. Statement 1004 War ni ng Before working on a sy stem that has an on/off s ...
-
Cisco Systems 274 - page 29
2-3 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 2 Preparing to Install the Wi de Area Virtualization Eng ine Safety Warnings War ni ng Before working on equipment that is connected to power line s, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connecte ...
-
Cisco Systems 274 - page 30
Chapter 2 Preparing to Install the Wide Area Virtualiz ation Engine Safety Guidelines 2-4 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Safety Guidelines T o reduce the risk of bodily injur y , electrical shock, f ire, and damage to the equipment, observe the prec autions in this section. This section c ...
-
Cisco Systems 274 - page 31
2-5 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 2 Preparing to Install the Wi de Area Virtualization Eng ine Safety Guidelines • If any of the follo wing condition s occur , unplug the product from th e electrical outlet and replace the part or conta ct your customer servi ce represen tativ e: ...
-
Cisco Systems 274 - page 32
Chapter 2 Preparing to Install the Wide Area Virtualiz ation Engine Safety Guidelines 2-6 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 • Observe p ower strip ratings. Make sur e that the total ampere r ating of all products plugged into the po wer strip doe s not exceed 80 percent of the po we r stri ...
-
Cisco Systems 274 - page 33
2-7 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 2 Preparing to Install the Wi de Area Virtualization Eng ine Safety Guidelines • The air baf fle assembly is alw ays installed in the appliance e xcept when you are installing or removi ng the components that are located under the air baf fle cov ...
-
Cisco Systems 274 - page 34
Chapter 2 Preparing to Install the Wide Area Virtualiz ation Engine Safety Guidelines 2-8 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 ...
-
Cisco Systems 274 - page 35
CH A P T E R 3-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 3 Installing the Wide Area Virtualization Engine This chapter descr ibes how to install a W ide Ar ea V irtualiza tion Engine (W A VE) appliance on a tabletop, on a wall, or in an equipment rack. Th is chapter contains the following sections: ...
-
Cisco Systems 274 - page 36
Chapter 3 Insta lling the Wide Area Virtualization Engine Installing the WAVE Appliance on a Tab letop 3-2 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Installing the WAVE Appliance on a Tabletop When you install a W A VE appliance on a workbench or tableto p, ensure that the surface is clean and in a ...
-
Cisco Systems 274 - page 37
3-3 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 3 Installing the Wide Area Virtualization Engine Installing the WAVE Appliance o n a Wall Figur e 3-1 W A VE-274 and W A VE-47 4 Appliance Mounting Sleeve T o mount your W A VE appliance using the mounting slee ve, follo w these steps. Step 1 Po we ...
-
Cisco Systems 274 - page 38
Chapter 3 Insta lling the Wide Area Virtualization Engine Installing the WAVE Appliance on a Wa ll 3-4 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Figur e 3-2 Attac hing the Mo unting Sleeve Step 3 Slide the W A VE appliance into the mounting sleev e as sho wn. See Figure 3-3 on page 3-4 . Figur e 3-3 ...
-
Cisco Systems 274 - page 39
3-5 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 3 Installing the Wide Area Virtualization Engine Installing the WAVE Ap plian ce in an Equipment Rack Installing the WAVE Appliance in an Equipment Rack Use the optional rackmount shelf to inst all your W A VE-274 or W A VE-474 in an equipment rack ...
-
Cisco Systems 274 - page 40
Chapter 3 Insta lling the Wide Area Virtualization Engine Connecting Cab les 3-6 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Rack Requirements Install your W A V E appliance in a rack that meets the followin g requirements: • Minimum de pth of 2.76 inches (70 mm) between the front mounting flange an ...
-
Cisco Systems 274 - page 41
3-7 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 3 Installing the Wide Area Virtualization Engine Checking the LEDs Step 1 Re view the information in the “Safety Guidelines” section on page 2-4 . Step 2 Plug a po wer cord into the power cord receptac le on the bac k of the W A VE appliance. S ...
-
Cisco Systems 274 - page 42
Chapter 3 Insta lling the Wide Area Virtualization Engine Removing or Replacing a WAVE Appliance 3-8 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 When you remove a W A VE ap pliance, the pages that we re cached on that de vice are no longer av ailable to the router or other W A VE appliances. Y ou migh ...
-
Cisco Systems 274 - page 43
CH A P T E R 4-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 4 WAVE Inline Network Adapter This chapter describes the Cisco W A VE in line network adapt er and contains the follo wing sections: • Inline Network Ad apter Description, page 4-1 • Ports and LED Indicators, page 4-3 • Inline Networ k A ...
-
Cisco Systems 274 - page 44
Chapter 4 WAVE Inline Network Adapter Inline Network A dapter Description 4-2 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Note Throughout this section, we refer to a W A VE appliance configured for inline interception mode as a W A VE inline appliance . The W AAS software def ines two ne w in terface ...
-
Cisco Systems 274 - page 45
4-3 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 4 WAVE Inline Network Ad apter Ports and LED Indi cators Ports and LED Indicators Figure 4-1 sho ws the 2-po rt inline ne twork adapter port nu mbers, inte rface designation s, and LEDs. Figur e 4-1 2-P ort In line Netw or k Adapt er P ort Number i ...
-
Cisco Systems 274 - page 46
Chapter 4 WAVE Inline Network Adapter Inline Network Adapter Cabling Requirements 4-4 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Inline Network Adapter Cabling Requirements The inline network adapt er ships with two types of cables: crossov er and straight-through. When you connect the W A VE inline ...
-
Cisco Systems 274 - page 47
4-5 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 4 WAVE Inline Network Ad apter Inline Network Adap ter Cablin g Requirements Some switches support au tomatic medium-depende nt interface crossover (MDIX). Y ou c an configure MDIX by using th e mdix auto global conf iguration switch command . If y ...
-
Cisco Systems 274 - page 48
Chapter 4 WAVE Inline Network Adapter Inline Network Adapter Cabling Requirements 4-6 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Note Because the inline network adapt er ha s an internal crossov er connection that becomes activ e when the In lineGroup interface is placed in mechanical bypass mode, yo ...
-
Cisco Systems 274 - page 49
4-7 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 4 WAVE Inline Network Ad apter Installation Scenarios and Cabling Ex amples for Fast Ethernet Conne ctions For e xample, if you are connecting a router and a switch (tw o dif ferent de vices) through the W A VE inline appliance, use a straight-thro ...
-
Cisco Systems 274 - page 50
Chapter 4 WAVE Inline Network Adapter Installation Sce narios and Cabling Examples for Fast Ethernet Conne ctions 4-8 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Figur e 4-2 Cabling f or Ser ial Cluster Inline W A VEs with a Single W AN Connection 1 Connection: W A VE 1 to LAN switch Fast Ethernet: LA ...
-
Cisco Systems 274 - page 51
4-9 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 4 WAVE Inline Network Ad apter Installation Scenarios and Cabling Ex amples for Fast Ethernet Conne ctions Figur e 4-3 Cabling B etween T wo Inline W A VEs 1 Connection: W A VE 1 to LAN switch Fast Eth er net : W A V E 1 LAN0 (InlinePort 1/0/lan) C ...
-
Cisco Systems 274 - page 52
Chapter 4 WAVE Inline Network Adapter Installation Sce narios and Cabling Examples for Fast Ethernet Conne ctions 4-10 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 ...
-
Cisco Systems 274 - page 53
CH A P T E R 5-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 5 Troubleshooting the System Hardware This chapter pro vides basic troubleshooting inf ormation to help you identi fy some common problems that might occur with your W ide Area V irtualization Engine (W A VE). This chapter contains the followi ...
-
Cisco Systems 274 - page 54
Chapter 5 Troub leshooting the Syste m Hardware Identifying System Problems 5-2 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Note The W AAS software does not su pport the use of a ke yboard or mouse (Personal System/2 [PS/2] or Uni versal Serial Bus [USB]) for Linux and W AAS software troubl eshooting. ...
-
Cisco Systems 274 - page 55
5-3 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Checking Connections a nd Switches Checking Connections and Switches Improperly set switches and co ntrols and loose or improper ly connected cables are the most like ly source of problems for the chassis or ot ...
-
Cisco Systems 274 - page 56
Chapter 5 Troub leshooting the Syste m Hardware Troubleshooting the Ethern et Controller 5-4 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 No . Call your customer servic e representati ve. (See the “Obtaining Documentation, Obtaini ng Support, and Securi ty Guidelines” section on page xix .) Trouble ...
-
Cisco Systems 274 - page 57
5-5 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Troubleshooting the Ethernet Controlle r – The Ethernet link status LED is on when the Ethernet controlle r recei ves a link pulse from the switch. If the LED is of f, there might be a defectiv e connector or ...
-
Cisco Systems 274 - page 58
Chapter 5 Troub leshooting the Syste m Hardware Undetermined Pr oblems 5-6 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Undetermined Problems Use the information in this sect ion if the diagnostic tests di d not identify the failure, the d evices list is incorrect, or the system is inoperati ve. Note D ...
-
Cisco Systems 274 - page 59
5-7 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Problem-Solving Tips • Disk driv es • Memory mo dules Caution Any component that i s internal to the de vice must be serviced by trai ned and qualif ied personnel. Contact your Cisco customer service repres ...
-
Cisco Systems 274 - page 60
Chapter 5 Troub leshooting the Syste m Hardware Symptoms and Solutions 5-8 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 – Has this configuration e ver wo rked? – If it has been working, w hat chan ges were made before it failed? – Is this the original repor ted failure? • Hardware conf iguratio ...
-
Cisco Systems 274 - page 61
5-9 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Symptoms and Soluti ons Ta b l e 5-2 CD-RW/D VD Dr ive Pr oblems Symptom Cause and Action CD-R W/D VD drive is not recognized . 1. V erify the follo wing items: a. The IDE channel to which the CD-R W/DVD dri ve ...
-
Cisco Systems 274 - page 62
Chapter 5 Troub leshooting the Syste m Hardware Symptoms and Solutions 5-10 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Ta b l e 5-5 Inter mit tent Pr oblems Symptom Cause and Action A problem occurs only occasionally and is dif ficult to detect. 1. V erify the follo wing items: a. All cables are conn ...
-
Cisco Systems 274 - page 63
5-11 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Symptoms and Soluti ons Ta b l e 5-7 Micr o processor Pr oblems Symptom Cause and Action The de vice emits a continuous tone during POST , indicating that the micropro cessor is not working corr ectly . 1. Cor ...
-
Cisco Systems 274 - page 64
Chapter 5 Troub leshooting the Syste m Hardware Power-On Self Test (POST) 5-12 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Power-On Self Test (POST) This section lists the er ror codes, error messages, an d the v arious indicator light and beep sequen ces that you may e ncounter during the Power - On ...
-
Cisco Systems 274 - page 65
5-13 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Power-On Self Test (POST) Note A single problem migh t cause sev e ral erro r messages. When this situation occurs, you should correct the cause of the f irst error message. After you correct the cause of the ...
-
Cisco Systems 274 - page 66
Chapter 5 Troub leshooting the Syste m Hardware Power-On Self Test (POST) 5-14 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 201-Memory Error RAM fail ure. 213-Incom patible Memo ry Module in Memory Socket(s) X, X, ... A memory module in memory sock et identified in the error message is missing critical ...
-
Cisco Systems 274 - page 67
5-15 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Power-On Self Test (POST) 917-Front Audio Not Connected Front audio harness has been detach ed or unseated from motherboard. 918-Front USB Not Connected Front USB harnes s has been detached o r unseated from m ...
-
Cisco Systems 274 - page 68
Chapter 5 Troub leshooting the Syste m Hardware Power-On Self Test (POST) 5-16 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Interpreting POST Diagnostic Front Panel LEDs and Beep Codes This section covers the front panel LED co des as we ll as the beep codes that may occur before or during POST t hat d ...
-
Cisco Systems 274 - page 69
5-17 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Power-On Self Test (POST) Red Power LED flashes two times, once ev ery second, follo wed by a 2-second pause. Beeps stop after fifth iteration b ut LEDs continue until problem is solv ed. 2 Processor thermal p ...
-
Cisco Systems 274 - page 70
Chapter 5 Troub leshooting the Syste m Hardware Power-On Self Test (POST) 5-18 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Red Power LED flashes four times, once ev ery second, follo wed by a 2-second pause. Beeps stop after fifth iteration b ut LEDs continue until problem is solv ed. 4 Power failure ...
-
Cisco Systems 274 - page 71
5-19 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Chapter 5 Troubleshooting the System Hardware Power-On Self Test (POST) Red Power LED flashes se ven times, once e very second, followed b y a 2-second pause. Beeps stop after fift h iteration b ut LEDs continue until prob lem is solved. 7 System board fa ...
-
Cisco Systems 274 - page 72
Chapter 5 Troub leshooting the Syste m Hardware Power-On Self Test (POST) 5-20 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Red Power LED flashes ten times, once ev ery second, follo wed by a 2-second pause. Beeps stop after fifth iteration b ut LEDs continue until problem is solv ed. 10 Bad option car ...
-
Cisco Systems 274 - page 73
A-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 APPENDIX A Wide Area Virtualization Engine Hardware Specifications This appendix pro vides hardware specif ica tions for the W ide Area V irtualization Engine (W A VE) 274 and 474 appliances. It contains the follo wing sections: • Appliance Specification ...
-
Cisco Systems 274 - page 74
Appendix A Wide Area Virtua lization Engine Hardware Specifications Appliance Specifications A-2 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Size • Height: 3.94 in. (10. 0 cm) • Depth: 15.0 in. (38.0 cm) • W idth: 13.4 in. (34.0 mm) W eight 18.6 lb (8.4 kg) typical Ports • USB: 6 USB 2.0 (2 fron ...
-
Cisco Systems 274 - page 75
A-3 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Appendix A Wide Area Virtua lization Engine Hard ware Specifications Appliance Specifications En vironment • Air temperature: – Device on: 50 to 104 ° F (10 to 40 ° C); altit ude: 0 to 2000 m (6500 ft) – De vice of f: –22 to 140 ° F (–30 to ...
-
Cisco Systems 274 - page 76
Appendix A Wide Area Virtua lization Engine Hardware Specifications Inline Adapte r Specifications A-4 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Inline Adapter Specifications Ta b l e A-2 describes the inline network adapter technical and general specifications. Ta b l e A -2 Inline Networ k Adapter S ...
-
Cisco Systems 274 - page 77
B-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 APPENDIX B Maintaining the Wide Area Virtualization Engine Proper use of pre venti ve maintenance proce dures can keep the W ide Area V irtualization Engine (W A VE) in good operating cond ition and minimize the need for costly , time-consuming service pr ...
-
Cisco Systems 274 - page 78
Appendix B Maintaining the Wide Area Virtualizatio n Engine Maintaining Your Site Environme nt B-2 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 • T empera ture, page B-2 • Humidity , page B-3 • Altitude, page B-3 • Dust and Parti cles, page B-4 • Corrosion, page B-4 • Electrostatic Discharge, ...
-
Cisco Systems 274 - page 79
B-3 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Appendix B Maintaining the Wide Area Virtualizatio n Engine Maintaining Your Site En vironment • Clean the system at regu lar interv als to av oid any b uildup of dust and debris, which can cause a system to ov erheat. • If the system has been e xpos ...
-
Cisco Systems 274 - page 80
Appendix B Maintaining the Wide Area Virtualizatio n Engine Maintaining Your Site Environme nt B-4 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Dust and Particles A clean operating en vironme nt can greatly reduce the neg ati ve ef fects of dust and other particles, which act as insula tors and interfere ...
-
Cisco Systems 274 - page 81
B-5 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Appendix B Maintaining the Wide Area Virtualizatio n Engine Maintaining Your Site En vironment • W ear a grounding wrist strap. If a groun ding wrist strap is unav ailable, touch an unpainted metal surf ace on the chassis periodically to neutralize an ...
-
Cisco Systems 274 - page 82
Appendix B Maintaining the Wide Area Virtualizatio n Engine Maintaining Your Site Environme nt B-6 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 • Printers • T e lephones with real bells • Fluorescent ligh ts Shock and Vibration Excessiv e shock can damage the functi on, external appear ance, and ph ...
-
Cisco Systems 274 - page 83
B-7 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 Appendix B Maintaining the Wide Area Virtualizatio n Engine Using Power Protection Devices – T e letype mach ines – Adding machines – Laser printers – Facsimile machines – Any ot her motorized equipment Besides these appliances, the greatest th ...
-
Cisco Systems 274 - page 84
Appendix B Maintaining the Wide Area Virtualizatio n Engine Using Power Protection Devices B-8 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Line Conditioners Line conditioner s go beyon d the ov erv oltage protection of surge protecto rs. Line conditioners keep a system’ s A C power so urce voltage at ...
-
Cisco Systems 274 - page 85
IN-1 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 INDEX A AC power specifications A-2 adapters inline 4-1 altitude guidelin es B-3 B back panel LEDs (figure) 1-4 C cables connecting 3-6 cabling requirements inline network ad apter 4-4 inline network ad apter (examples) 4-7 cautions description of xii CD/ ...
-
Cisco Systems 274 - page 86
Index IN-2 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 dust preventing dam age B-4 E electromagnetic interference See EMI electrostatic discharge See ESD EMI preventing effects of B-5 environment maintaining B-1 ESD preventing dam age 2-7, B-4 Ethernet activity LED 1-5 Ethernet controller troubleshoot ...
-
Cisco Systems 274 - page 87
IN-3 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide OL-17739-01 Index description 1-3, 1-5 front panel (table) 1-3 front view 1-2 inline network ad apter 4-3 rear view 1-4 line conditioners using B-8 M magnetism preventing effects of B-5 maintenance B-1 to B-7 memory problems 5-10 microprocessor problems 5-11 N networ ...
-
Cisco Systems 274 - page 88
Index IN-4 Cisco Wide Area Virtualiz ation Engine 2 74 and 474 Hardware Installation Guide OL-17739-01 warnings 2-1 serial port connector pi nout 1-6 description 1-6 problems 5-11 shock preventing dam age B-6 site environment maintenance factors B-1 software problem s troubleshooting 5-11 status LEDs 1-4 surge protectors using B-7 switches troubles ...
Do you have a question concerning Cisco Systems 274?
Use the form below
If you did not solve your problem by using a manual Cisco Systems 274, ask a question using the form below. If a user had a similar problem with Cisco Systems 274 it is likely that he will want to share the way to solve it.