Manual ACR Electronics 2662

111 pages 4.45 mb
Download

Go to site of 111

Summary
  • ACR Electronics 2662 - page 1

    ...

  • ACR Electronics 2662 - page 2

    Y1 - 03 -0211 Rev D II Please read this first! Warning: Although ACR strives for accuracy in all its public ations; this material may contain errors or omissions, and is subject to change w ithout prior notice. ACR shall not be made liable for any specific, indirect, incidental or consequential da mages as a resul t of its use. ACR components may o ...

  • ACR Electronics 2662 - page 3

    Y1 - 03 -0211 Rev D III 1 S TARTING THE NAUTICA ST ................................................................................................................. 1 1.1 Initial Set Up of the NAUTICAST f or operation ............................................................................................... 1 1.2 Entering the MMSI / IMO / DAC ...

  • ACR Electronics 2662 - page 4

    Y1 - 03 -0211 Rev D IV History of Change s Date Version Rev. Status Comments Responsible 200 5-11-01 1.0 .0 A Released Initial Release A. Lesch 2006 -07-25 1.0.1 B Released Editorial w ork  2006 -11- 06 1.0.2 C Released Screen Display Updates  2008 - 12 - 05 1.0.5 D Relea ...

  • ACR Electronics 2662 - page 5

    Y1 - 03 -0211 Rev D 1 1 Starting the NA UTICAST 1.1 Initial Set Up o f the NAU TICAST for operation NOTE: A UT HORITIES M A ND A T E THAT YOU ENTE R THIS INFORM A T ION. After install ing the antennas and hardware the following User, Voyage related and Ship Settings data needs to be entered. Upon Star t- up (Applying power) enter the f ollow ing in ...

  • ACR Electronics 2662 - page 6

    Y1 - 03 -0211 Rev D 2 1.2 Entering the M MSI / IMO / DA C / ESN Numbers Select from the Main Menu “Serv i ce Configura t ion ” Number 6 . The default password from the factory is men tioned on y our AIS display at the protection foil. (see Appendix 7.3 for password information). E nter Service Password and use the up and dow n arrow s on keypad ...

  • ACR Electronics 2662 - page 7

    Y1 - 03 -0211 Rev D 3            No. 4 on the keyboard. Input new DAC / ESN Numbers and press [Save] to st ...

  • ACR Electronics 2662 - page 8

    Y1 - 03 -0211 Rev D 4 1.3 Entering Ship Settings               . T he default password f rom the factory is mentioned on your AIS d ...

  • ACR Electronics 2662 - page 9

    Y1 - 03 -0211 Rev D 5 Setting the In ternal and Externa l GPS A ntenna Position. NOTE: It is critica l for the proper orien t at ion of your ship to other AIS users to enter this data accurate l y . Example : Len gth of ship / convoy = 220m and Be am of ship / convoy = 43m. GPS A NTENNA location on ship (is x in above Menu example) is located 200 m ...

  • ACR Electronics 2662 - page 10

    Y1 - 03 -0211 Rev D 6 Sub Menu           No. 1 on the keyboard. Draught: Scrol l the Data Fields with [Ente ...

  • ACR Electronics 2662 - page 11

    Y1 - 03 -0211 Rev D 7                No. 2 on the keybo ard. Toggle the values for ...

  • ACR Electronics 2662 - page 12

    Y1 - 03 -0211 Rev D 8 Mask input: Scroll t he Data Fields with [Enter] and input the UN destination codes as well as the ETA (estimated time of arrival) data. Save the new settings b y pressing [Save], and r eturn to the Main Menu Screen by pressing [Exit]. Press [Ex it] to return to the M ain Menu without saving any changes. String Input: Direct i ...

  • ACR Electronics 2662 - page 13

    Y1 - 03 -0211 Rev D 9 1.5 Service and User Passwords WARN ING: It i s very i mportan t t hat the Service password not be lost . The default password f rom the factory is mentioned on your AIS display at the protection f oil. (see Appendix 7.3 for password information) . Keeping the password in a second location m ay be wise. Memorizing the passw or ...

  • ACR Electronics 2662 - page 14

    Y1 - 03 -0211 Rev D 10 Service Menu Exa mple: Service Pass w ord Men u Example : Enter the new Passw ord: T hen push Ente r (M5). Repeat the new Password: Then Push Enter (M 5). A minimum o f 6, a maximum of 8 characters are allowed. Should the new passw ord include numbers, use the shift key to generate them. Press Save to s tore the change . N 1 ...

  • ACR Electronics 2662 - page 15

    Y1 - 03 -0211 Rev D 11 Changing the User Pass word                   number 2 on the keyb ...

  • ACR Electronics 2662 - page 16

    Y1 - 03 -0211 Rev D 12 Press Save to s tore the changes. 2 NAUTICA ST™ I nl and AIS User Inter face 2.1 NAUT I CAST Key board The NAUTICAS T is fitted w ith a full alphanumeric keyboard, wi th the following functions : By pressing any key on the key board the letters a re addressed. Number symbols and spe cial characters are addressed by holdi ng ...

  • ACR Electronics 2662 - page 17

    Y1 - 03 -0211 Rev D 13 2.3 Explanation of the Nu m -Locked and [NUM] F uncti ons The NU M-Locked function is enabled af te r pressi ng the Function [ Fn ] Key and the Shift [  ] Key. It is possible to disab le the Num-Loc k Fun ction by pressing the Shift [  ] Key . NOTE: The NAU TICAST      ...

  • ACR Electronics 2662 - page 18

    Y1 - 03 -0211 Rev D 14 3 NAUTICA ST Screen s The advanced versi on of the NAUTICAST offers three display modes: Navigation Screen - Standard screen, au tomatically visible Menu Structu re - Visible after pressing the [Menu] Soft Ke y Graphical User Inte rface - The Graphical User Interf ace is visible after pressing the [M2] Sof t Key (new m ode) 3 ...

  • ACR Electronics 2662 - page 19

    Y1 - 03 -0211 Rev D 15 3.1.1 Own Vessel Data LAT:N 1°27.845'ExtSOG:34.6kn 05/26/06 LON:E 0°21.289'ExtCOG:173.0° 10:52:26 LAT: Latitude LON: Longitude Date: The actual UTC - date (MM.DD.YY) and time (hh.mm.ss) are display ed on t he top right hand corne r of this v iew. IntGPS: 3D A/ ExtHDT:222° Reg6 IntGPS Indicates normal or differen ...

  • ACR Electronics 2662 - page 20

    Y1 - 03 -0211 Rev D 16 3.1.2 Other Vessel Data 001/021..SHIPNA ME....RN G.BRG..SOG..CO G.. 001/021 (E.g: Vessel 01 of 021) curr en t or selected Vessel/ T o tal number of Vessels (max. 256 Vessel s) ShipName: Name of the Ship and AIS  Type: Cl - A: S OLAS Class-A Ship Cl - B: Le isure Craft Base: Base station SAR : Search and Rescue Aircra f t R ...

  • ACR Electronics 2662 - page 21

    Y1 - 03 -0211 Rev D 17 3.1.4 Other Vessel Deta i ls This screen shows the Dynamic, Voyage and Vessel Related Data, w h ich is currently being transmitted by a previousl y selected vessel . Current Time and Sele cted Vessel Numbe r in Vessel Listing: Time 2:07 ------ ---------- POS: 00 01/0021 Time : The period of time which has elapsed since the la ...

  • ACR Electronics 2662 - page 22

    Y1 - 03 -0211 Rev D 18 This in formation indicates the Re f erence Point of the used GPS Ant enna onboard the vessel. RefPoint:A190 B120 C1 0 D<63m A: 190m B: 120m C: 10m D: >63m (means m o re than 63m i n the case of a very large vessel) Vessels Cargo: Indicates the t y pe of cargo on board. N/A or harmless Further Vessel Details: Draught : ...

  • ACR Electronics 2662 - page 23

    Y1 - 03 -0211 Rev D 19 To call up the Mai n Menu, press the [Menu] button once, and all Submenus are display ed. The cursor posi tion indicates the sel ected submenu. Menu navigation is achiev ed b y pressi ng the [Up] or [Down] keys t o select, and then by pressing [Enter] to con firm the desired Sub menu selection. To escape f rom any Submenu and ...

  • ACR Electronics 2662 - page 24

    Y1 - 03 -0211 Rev D 20 NOTE: The nav igation screen automatical ly appears after some seconds of user inactivi ty on the transponder, or immediatel y by pressing the [ Menu] button in the Mai n Menu. 3.4 Sub-Menus Ov erviewMessages 3.4.2 A IS Status 3.4.3 Voyag e Settings – (User Password Pro tected) N 1 o 19' E 0 o 12' |1>0.10|2> ...

  • ACR Electronics 2662 - page 25

    Y1 - 03 -0211 Rev D 21 3.4.4 Ship Settings – (User Pass word Protected) 3.4.5 Transpond er Configuration – (User Pass word Protected) 3.4.6 Service Configura t ion – (Service Pass w ord Pr otected) N 1 o 19' E 0 o 12' |1>0.01|2>1.30|3>1.80nm ************ Ship Settings ************* Atis Code :max. 7ASCII +------+ ShipName : ...

  • ACR Electronics 2662 - page 26

    Y1 - 03 -0211 Rev D 22 3.4.7 Display Settings 3.4.8 Graphical Disp lay Settings N 1 o 21' E 0 o 15' |1>0.10|2>1.30|3>1.80nm *********** Display Settings *********** Mode | +- [*] Day Min Max | +---- Brightness:<9> [*********] | +---- Contrast : 6 [****** ] | | +- [ ] Night Min Max + ---- Brightness: 3 [*** ] + ---- Contrast ...

  • ACR Electronics 2662 - page 27

    Y1 - 03 -0211 Rev D 23 3.5 Sub-Menus Detai led 3.5.1 Messages Dynamic Key s: Messag es [M5] [Select] Select chosen Submenu [Enter] Confirm Message Submenu Selection [M8] [Back] Return to Mai n Menu Screen [Up] / [Down] Navi gate S ubmenu for Selection Writing Message s: This screen prov ides a means to w rite and send mes sages. It is possibl e to ...

  • ACR Electronics 2662 - page 28

    Y1 - 03 -0211 Rev D 24 a) Writing an Addres sed M essag e To write a Sa f ety Related M essage first select an addressee from the Vessel Listing. This is possible by using the cursor but tons [Up] and [Dow n], and confirmin g the selection wi th [Enter] or [Select ]. Dynamic Key s: Messag es [M5] [Select] Write Message to Selected Vessel [Enter] Wr ...

  • ACR Electronics 2662 - page 29

    Y1 - 03 -0211 Rev D 25 Dynamic Key s: A ddressed Message Edi tor [M5] [Send] Send Messa ge [Enter] Send Message [M6] [Channel] Select Transmission Channel [M7] [Channel] Select Transmission Channel [M8] [Back] Return to Vesse l Listing c) Confirmation o f Sent Ad dressed Message The confirmation screen shows the successful message transmission and ...

  • ACR Electronics 2662 - page 30

    Y1 - 03 -0211 Rev D 26        this case the following screen is disp ...

  • ACR Electronics 2662 - page 31

    Y1 - 03 -0211 Rev D 27 e) Confirmation o f Broadca st Sent Message This Confirma t ion Screen shows that the message was successfully t rans mitted on the Broadcast Set ting. By pressing [Back] the user automatical ly retur ns to the Message Edi tor for f u rther Messaging. The [SendTo] returns the user to the Vessel Listing, with the option of fur ...

  • ACR Electronics 2662 - page 32

    Y1 - 03 -0211 Rev D 28 Handling a Long Range Interroga t ion (LRI) Default Settin gs for LRI Reques t s: A utomatic Mode : T he LR I is automati cally dealt wi th and own vessel data is sent. Manual Mode: The LRI needs to be manually handl ed. NOTE: The data whi ch may be interrogated vi a the Long Range I n terface can be configured in Men u 5: Co ...

  • ACR Electronics 2662 - page 33

    Y1 - 03 -0211 Rev D 29 An LRI has arriv ed; the NAUTICAST Settin g s ar e configured to Manual Mode : The LRI therefor e needs to be manually handl ed (accepted or re jected) Dynamic Key s: LRI in the Inbox H istory (manual mode) [M5] [OK] Accept LRI Interrogation [M7] [Reply ] Send Addressed Message to LRI Sender [M6] [Reject] Reject LR Interrogat ...

  • ACR Electronics 2662 - page 34

    Y1 - 03 -0211 Rev D 30 Inbox History: Overview of Received Messages an d Alarms Message Ty pes: Description ASRM Addressed Safety Related M essag e BSRM Broadcast Sa fety Related M essage ALR Alarms (Details  see Alarm Ty pes) LRI Long Range Inte rrogation Message Status : * Marks a new , unac knowledged messa ge or alarm ! Marks a val id alarm ...

  • ACR Electronics 2662 - page 35

    Y1 - 03 -0211 Rev D 31 ASRM*13:42 HI GH WINDS IN AREA! 5004 Addressed Safety Related M essage, unacknowledged by recipient, arrived at 13:42, with text      ALR 13:40 exte rnal EPFS los ...

  • ACR Electronics 2662 - page 36

    Y1 - 03 -0211 Rev D 32 ASRM: Information Time 17:39 Date 11/26 (mm.dd) POS 01/02 (M essage 01 of 02) Message Ty pe AddressedSRM Status * (not acknow ledged) MMSI o f Sende r 5004 Channel Incoming AIS Chann el ACK Message not y et acknowledged A LR – Reading Incoming A larms: ALR: Information Time 17:36 Date 11/26 (mm.dd) POS 01/1 Message Ty pe AL ...

  • ACR Electronics 2662 - page 37

    Y1 - 03 -0211 Rev D 33 h)                  ? ...

  • ACR Electronics 2662 - page 38

    Y1 - 03 -0211 Rev D 34 i)                 ...

  • ACR Electronics 2662 - page 39

    Y1 - 03 -0211 Rev D 35 Mod.: A IS Transmission Mode AU Autonomous AS Assigned IN Interrogation/Pol led Mode ?? Unknown Used Channel AIS1, AIS2 Syn.: (UTC source ) D UTC direct I UTC indirect B Sync to Base A Sync to mobile w ith the most re ceived stations ( Semaphore) RXVe: Total number o f all receiv ed st ations by the individual vessel. MMSI: M ...

  • ACR Electronics 2662 - page 40

    Y1 - 03 -0211 Rev D 36 Reference Point (in meters): This in formation indicates the Re f erence Point of the used GPS Antenna onboard the vessel. RefPoint: A190 B1 20 C1 0 D>63m A: 190 m B: 1 20 m C: 10m D: > 16m Vessels Cargo: Indicates the ty pe of cargo on board N/A or harmless Further Vessel Details: Draught : 3.3 m Dest : HA W AII ETA : ...

  • ACR Electronics 2662 - page 41

    Y1 - 03 -0211 Rev D 37 m) Security Log The Security Lo g is implemented to show the  sw itched off   time s of the transponde r. In standard opera tion, this Lo g should not contain any entries. 3.5.2 Voy age Settings (User Password Protec t ed)       ...

  • ACR Electronics 2662 - page 42

    Y1 - 03 -0211 Rev D 38 N 1 o 20' E 0 o 13' |1> N/A|2>0.00|3>0.10nm | ---------------------------------- | Menu -----| | | + - 1. Messages View | + - 2. AIS Status | + - 3 . Voyage Settings -----| + - 4. Ship Settings | + - 5. Transponder Configuration Msg. | + - 6. Service Configuration | + - 7. Display Settings -----| + - 8. Gra ...

  • ACR Electronics 2662 - page 43

    Y1 - 03 -0211 Rev D 39 The password query field appears . Input new User Password and press [Enter].     G en eral Settings             No. 1 on the keyboa ...

  • ACR Electronics 2662 - page 44

    Y1 - 03 -0211 Rev D 40 NavS tat Navi gational Status Under way using engine At anchor Not under command Restricted maneu verability Constrained by her draught Moored Aground Engaged in fishing Under way sailing Undefined     Cargo/Vo yag e Settings    ? ...

  • ACR Electronics 2662 - page 45

    Y1 - 03 -0211 Rev D 41   Person s on Boa rd     o . 2 on the keyboard . NOTE: The total number of persons on board will b  ...

  • ACR Electronics 2662 - page 46

    Y1 - 03 -0211 Rev D 42 Input String: Direct input of the destination string. ETA (estima t ed time of arr iv al) has to be entered separately N 1 o 18' E 0 o 12' |1>0.01|2>1.30|3>1.80nm ************* Destination*************** use mask [ ]/[ *] input string Destination :NLDOR02552LEUVE00000 ETA(MMDDhhmm) :10/31 10:05 ------------ ...

  • ACR Electronics 2662 - page 47

    Y1 - 03 -0211 Rev D 43 Mask input: Scroll t he Data Fields with [Enter] and input the UN destination codes as well as the ETA (e stimated time of arriv al ) data. Save the new settings b y pressing [Save], and r eturn to the Main Menu Screen by pressing [Exit]. Press [Ex it] to return to the M ain Menu w ithout saving any changes. Toggle back to ? ...

  • ACR Electronics 2662 - page 48

    Y1 - 03 -0211 Rev D 44 3.5.3 Ship Set tings (User Pa ssword Protected)     or press No. 4 on t he keyboard. NOTE: Please see App endix 7. 3 for password in f ormati on Input your Use ...

  • ACR Electronics 2662 - page 49

    Y1 - 03 -0211 Rev D 45 Example: Length (of the co m plete convoy ) = 400m Beam (of the co m plete c onvoy) = 32m Internal GPS-Antenna is mounted 20 metres from stern and 24 me t res from starboa rd. Length(Conv) : 400 Beam(Conv) : 32 RefPtExt : RefPtInt : B20D24 (no spaces, no decimals, no commas) The full line as sho wn will be displ ayed after pr ...

  • ACR Electronics 2662 - page 50

    Y1 - 03 -0211 Rev D 46 After the Ship Set tings hav e been input and sav ed, this screen appea rs . [Exit] takes the use r b ack to the M ain M enu. GPS A ntenna Mounting It is important to inp ut t h e ex act mounting positi on of the GPS Antenna on the vessel as this influences the accu r acy of the display ed t arge t in an ECDIS. (RefPntExt:) = ...

  • ACR Electronics 2662 - page 51

    Y1 - 03 -0211 Rev D 47 3.5.4 T ransponder Configura tion (User Pass w ord Protected) The Configuration M enu allows the user t o al ter the hardware-based parameters. User Password Con figuration is also unde rt a ken here. A ccessing the Configuration Settings: The Configura tion Menu is User Passw ord protected. NOTE: Please see App endix 7.3 for ...

  • ACR Electronics 2662 - page 52

    Y1 - 03 -0211 Rev D 48 Incorrect User Pas sword Inpu t If the incorrect User Passw ord is input, the screen below appears. Dynamic Key s: User P assword Input (Acces s Denied) [M5] [Exit] Return to Vessel Listing a) Change User Pas sword (for initial NAUTICAST Operation) It is strongly recommended to change the default User Password upon initial NA ...

  • ACR Electronics 2662 - page 53

    Y1 - 03 -0211 Rev D 49 Dynamic Key s: Initia l User Password Se tting [M5] [Enter] Confirm User Password Input [M8] [Back] Return to Menu Configuration This screen appears if the new User Passwords are mismatched - i.e. the New User Password and the Repeated New User Password are not identical. In this case, it is possible to re -input both t he Ne ...

  • ACR Electronics 2662 - page 54

    Y1 - 03 -0211 Rev D 50 The new User Passw ord configuration has been sav ed. b) Region Settin gs A Region is a def ined area, w ith spe cifi c VHF parameters, which are sent out by Vessel Traffic Servi ce Stations (VTS), and received vi a Digital Selectiv e Calling (DSC ) or AIS. The screen show s a list of Regions, and their input sou rces. When t ...

  • ACR Electronics 2662 - page 55

    Y1 - 03 -0211 Rev D 51 Overvie w of Region Settings Name Region Number Number of pre-defined Region Valid OK Status of Region Setting - OK: Stored and Valid Source A:AddrChM A: Addressed Channel Management (Msge. 22) Source: VTS via AIS B:BcastChM B: Broadcast Channel Management (Msge. 22) Source: VTS via AIS C:AIS_ChAs C: AIS Channel Assignment Se ...

  • ACR Electronics 2662 - page 56

    Y1 - 03 -0211 Rev D 52 Input Modes fo r New Reg ions Data Field Field Description Input Modus A dditional Information NE LAT(1) Latitude N/E co rner Manual Input Degrees and minute s NE LON(1) Longitude of N/E corne r Manual Input Degrees and minute s S W LA T(2) Latitude of S/ W corner Manual Input Degrees and minute s S W LON (2) Longitude of S/ ...

  • ACR Electronics 2662 - page 57

    Y1 - 03 -0211 Rev D 53 d) Interrogation Set t ings This screen allows setting s for modes of r e sponse to Long Range Interroga tion Requests (LRI). It is possible to set the AIS station to respond automatically or manually to LR Interrogations, and det er mine whi ch vessel data may be interrogated. It is f urthe r possibl e to reply to ? ...

  • ACR Electronics 2662 - page 58

    Y1 - 03 -0211 Rev D 54 Replying to a Lo ng Range In terrogation Requ est: The arriv al of an LRI is show n in the Navigation S creen (top right hand cor ner: * 1L ) The detailed LRI is automatically stored in M enu 1:M essages, Sub menu: 6 Inbox LRI, where the request can be read and replied to. Dynamic Key s: Reply in g to a LR Interrogation [M5] ...

  • ACR Electronics 2662 - page 59

    Y1 - 03 -0211 Rev D 55 e) Sensor Settin gs Within t his service password protected menu t he NAUTICAST offers the following configuration options: Set up data speed 4800 /9600/38400 baud. Monitor the connec t ed s ensor inputs for each se nsor channel. Verify and edit the Sens or Con f igu ration on the di splay screen. Analyz e the information rec ...

  • ACR Electronics 2662 - page 60

    Y1 - 03 -0211 Rev D 56 f) Inland AIS Con f iguration / Blue Sign This screen allow s the user to t o ggle the quality of the speed , course or headi ng informa tion received from an external dev ice. T hese settings are normally set to low. NOTE: It is hi ghly recommended t o ke ep the settings on low . Blue Sign: Toggle the value fr om <not ava ...

  • ACR Electronics 2662 - page 61

    Y1 - 03 -0211 Rev D 57 3.5.5 Serv i ce Con figuration (Serv i ce Pass word Protected) The Service Conf i guration Menu allows initial configuration of the Service Password, Password Settings (on/off), MMS I/IMO Numbers a nd the option of resetting the NAUTICAST to Factory Settin g s. The Service Password is required in o rder to enter the Service C ...

  • ACR Electronics 2662 - page 62

    Y1 - 03 -0211 Rev D 58 g) Change Service Passw o rd This screen provides a means to indiv idually configure the Servi ce Pass word. This password                 ...

  • ACR Electronics 2662 - page 63

    Y1 - 03 -0211 Rev D 59 h) User Password Set tings Change User Pass word Protection : This f unc tion allows the user to enable or disable the User Password Q uery Function. For security reasons, it is highly recommended to enabl e User Password Protection in order to avoid unau thorized Transponder ope ration. After the settings hav e been input an ...

  • ACR Electronics 2662 - page 64

    Y1 - 03 -0211 Rev D 60 i) Changing the MMSI / IM O / DAC / ESN Nu mbers Mention ed DAC and ESN number s are only avai lable in Inland AIS - M ode .               ...

  • ACR Electronics 2662 - page 65

    Y1 - 03 -0211 Rev D 61            No. 4 on the keyboard. Input new DAC / ESN Numbers and press [Save] to st ...

  • ACR Electronics 2662 - page 66

    Y1 - 03 -0211 Rev D 62 j) Changing the A IS Mode                   press No. 6 o ...

  • ACR Electronics 2662 - page 67

    Y1 - 03 -0211 Rev D 63                    No. 5 on the keyboard.  ...

  • ACR Electronics 2662 - page 68

    Y1 - 03 -0211 Rev D 64 k) Restore Facto ry Settings CAUTION: By acknow ledging the return to Factory Settings Co mmand, all previ ous sett in g s , both the User and Serv ice Passwords and all manual ly input data are automatically deleted! After pressing [OK] - button, the NAUTICAST will restarts automatical ly and restore the factory settings ! I ...

  • ACR Electronics 2662 - page 69

    Y1 - 03 -0211 Rev D 65 3.5.6 Display Settings It is possible t o choose from Daylight and Nightlight Display Setting s ; it is further possibl e to adjust the Bri ghtness and Contrast Settings for both Di splay Settin g s. The maximum setting for Bri g htness and Contra st is <9>, the minimum setting i s <0>. It is possible t o automati ...

  • ACR Electronics 2662 - page 70

    Y1 - 03 -0211 Rev D 66 The main features o f this Graphical User Interface ( GUI) are the two new view options: - Radar View The typical w a y of prese nting traffic information o n scr een s - Fairway View This type of view is oriented to the current cour se over ground (COG ) and supports the operator w ith information related to this partic ular ...

  • ACR Electronics 2662 - page 71

    Y1 - 03 -0211 Rev D 67 3.6.1 Switching bet w een the Views Navigation Screen pressing [M2] leads to R adar View pressing [M2] leads to Fair w ay View pressing [M2] leads y ou back to Navigation S creen LAT:N 1 o 27.845'ExtSOG:34.6kn 05/26/2006 LON:E 0 o 21.289'IntCOG:173.0 o 10:52:26 IntGPS: 3D ExtHDT:222 o Reg6 A/ 001/021..ShipName....RN ...

  • ACR Electronics 2662 - page 72

    Y1 - 03 -0211 Rev D 68 3.6.2 The Radar Vie w This screen provides the user with a commonly used way of representing ship objects on an electronic device. The Radar View is northern orientated, as indicated by the compass on the very right top of the screen. The Elements of the Radar Vie w: Own Ship: A symbol for the ow n ship is displayed in the mi ...

  • ACR Electronics 2662 - page 73

    Y1 - 03 -0211 Rev D 69 Dynamic Key s: Radar View [M1] Set filter option on AIS Targets [M2] Switch betwee n the views [M3] Show al arm window [M5] Acknowledge alar ms or sa fety related messages (SRM ) [M7] Acknowledge SRM and reply [Menu] Selects the M ain Menu [Up] / [Do wn] / [Left] / [Righ t] Activate the mini mized radar v iew [FN] + [Up] / [D ...

  • ACR Electronics 2662 - page 74

    Y1 - 03 -0211 Rev D 70 This screen show s a 1 st ep scrolling in a southern direction . This screen show s a 2 st ep scrolling in a southern direction . The Minimized Radar Vie w The minimiz ed radar view sho w s a spl it scree n. On the le ft hand side a Ship List is display ed, on the right hand side a minimized view of the Radar View is visible. ...

  • ACR Electronics 2662 - page 75

    Y1 - 03 -0211 Rev D 71 The Elements in the Minimized Radar View: “Message Write” Button: By pressing the [M4] butt on , a message can be sent to an AIS target that is currently selected in the Ship Li st. Ship List: This list show s the same targets as show n in t he N avigation Screen. Ship List / Mini mized Vie w Switch: This switch indicates ...

  • ACR Electronics 2662 - page 76

    Y1 - 03 -0211 Rev D 72 Ship Details If a tar get is selec ted by pressing [Enter], whether in the Ship List or direct ly in the graphical view , the corresponding ship detail s are display ed instead of the mini mized vi ew. Pressing [ Up ] or [Dow n] scrolls the ship detail list by line, [Left] or [Ri ght] by page. [M8] returns to the mi nimized v ...

  • ACR Electronics 2662 - page 77

    Y1 - 03 -0211 Rev D 73 Compass Own Ship AIS Targets Horizontal Lines Fairway Lines ...

  • ACR Electronics 2662 - page 78

    Y1 - 03 -0211 Rev D 74 The Elements in the Fair way View: Compass: Shows the current COG. Fairway Lines : The Fairway L ines are border lines of a virtual fairway oriented on the actual course over ground. A IS-Targets : Other AIS targets received via VHF are displayed, if their dis tance is w ithin the r an ge of the current zoom l evel. Own Ship: ...

  • ACR Electronics 2662 - page 79

    Y1 - 03 -0211 Rev D 75 Zoom Level 2 would look l ike this: The Minimized Fairway Vie w The minimized Fairw ay View shows a split screen. On the left hand side a Ship List is display ed and on the ri ght hand side a minimiz ed Fairway V iew is seen. This view is display ed, if one of the cursor keys is pressed. Fairway View  [Up] | [Dow n] | [Lef ...

  • ACR Electronics 2662 - page 80

    Y1 - 03 -0211 Rev D 76 Ship List / Mini mized Vie w Switch: This switch indicates whether targets can be selected f ro m the Ship List or f rom the minimized view. If the arrow above the [M6] points to the left, targets can be selected from the Ship List with the [Up] and [Down] buttons. If the arrow above points to the right, targets can be select ...

  • ACR Electronics 2662 - page 81

    Y1 - 03 -0211 Rev D 77 3.6.4 Message and A larm Han dling A larms If an alarm occurs , the sy m bol to the right of the [ M3] button becomes visible. Pressing the [M 3] button show s t he detail s of the selected aler t . Pressing [M5] leads to alarm acknowledgement and the closure of the window as well as the alarm icon disappearing. An alarm coul ...

  • ACR Electronics 2662 - page 82

    Y1 - 03 -0211 Rev D 78 3.6.5 Configuration of the Grap hical Display General The configuration of the Gr aphical Display could be accessed over the entry point 8 of the Main Men u. The Configura tion Menu allow s the user to alter th e parameters of the G raphical Di splay. A ccessing the Configuration Settings: The Configura tion Menu is User Pass ...

  • ACR Electronics 2662 - page 83

    Y1 - 03 -0211 Rev D 79 Sub-Men u Content Fairway View Scale Settings of the Geometry and Scal e of the Fairway View Fairway View Symbols Symbol sett ings of t h e Fairway View (also the minimized Fairway View ) Radar View Symbols Symbol settings of the Radar View (also the minimized Radar View) Other Graphical Se t tin gs AIS-target filte r setting ...

  • ACR Electronics 2662 - page 84

    Y1 - 03 -0211 Rev D 80 NOTE: The Fairw   The follow ing drawing il lustrates the parameters from the Fairway View Scale M enu and additionally presents the transfor mation process from the Radar View to the Fairway View. 10 nm Horizontal line 260° 325.0° ...

  • ACR Electronics 2662 - page 85

    Y1 - 03 -0211 Rev D 81 Fairway Vie w Symbols Dynamic Key s: Fair way View Sy mb ols [M5] [Save] Save the settin g s [M8] [Back] Return to Graphical Display M enu The symbols for the own ship and for other tar gets could be selected individual ly. Followi ng symbols are av ai labl e: Parameter Symbol Standard Standard + Vecto r s Standard Solid Stan ...

  • ACR Electronics 2662 - page 86

    Y1 - 03 -0211 Rev D 82 Radar Vie w Symbols Parameter Symbol Standard Standard + Vecto r s Standard Solid Standard Solid + Vectors Solid Reduced (3x3) NOTE: Other Sy mbols (i.e.: for a Base Station) are fixed Dynamic Key s: Radar View Symbols [M5] [Save] Save the settin g s [M8] [Back] Return to Graphical Display M enu N53°31 E10° 1 |1>0.69|2&g ...

  • ACR Electronics 2662 - page 87

    Y1 - 03 -0211 Rev D 83 Other Settings Inside this menu it is possible to adjust the graphical view to your demand. The available functions cov er the topics: o AIS-t a rget filter settin g s o Enabling / disabling the A uto Zoom feature w ith max. number of ships o Alarm appearance Dynamic Key s: Other S ett ing s [M5] [Save] Save the settin g s [M ...

  • ACR Electronics 2662 - page 88

    Y1 - 03 -0211 Rev D 84 Save On all of the desc ribed options inside the Configuration of the Graphical User Interface you could save y our settings by pressing the [M2] Butt on. Dynamic Key s: Other S ett ing s [M5] [Save] Save the settin g s [M8] [Back] Return to Graphical Display M enu 4 Safety Functions The NAUTICAST is f i tted with Safety Keys ...

  • ACR Electronics 2662 - page 89

    Y1 - 03 -0211 Rev D 85 4.1 MOB Person ov er Board By pressing t he MOB button the current navigation position of own vessel and time of incident is automaticall y saved. The M OB message containing the distress in f orma tion        prepar ...

  • ACR Electronics 2662 - page 90

    Y1 - 03 -0211 Rev D 86 4.2 A ctivating the SRM Saf ety Related Message Button The desired Distress M e ssage T ex t can be selected by pressing the appropriate nu mber on the keyboard. By pressing the [Exi t] button, it is possible to escape fro m this screen without sending the SRM M essa ge. NOTE: If no Message Subject is selected, the message is ...

  • ACR Electronics 2662 - page 91

    Y1 - 03 -0211 Rev D 87 Dynamic Key s: Send SR M Message [M5] [Send] Send selected SRM Messa ge [M8] [Back] Return to SRM Message Selection Confirmation o f sent SRM: Upon sending the SRM to all v essels the Broadcast Transmissi on Stat us is show n. The Broadcast Transmission Status Screen shows confirmation of sent messa g e and allows the user to ...

  • ACR Electronics 2662 - page 92

    Y1 - 03 -0211 Rev D 88 NOTE: The SRM message transmission is automatically repeated every 180 seconds until the [Stop] button has been pressed. Each SRM Message that is sent out every 180 seconds contains updated navigation information o f own vessel posi tion and actual time . Dynamic Key s: SRM Message Vie w [M5] [Stop] Discontinue SRM Message Tr ...

  • ACR Electronics 2662 - page 93

    Y1 - 03 -0211 Rev D 89 5 Troublesho oting 5.1 Reading and unde rstanding A larms: The NAUTICAS T differentiates between Alarm and TXT messages. An Alarm informs the user about ma jor system mal functions and fail ings in the connected sen sors. The Alarm Status informs the user about all active Alarms. The Alarm will be disabled and deleted from th ...

  • ACR Electronics 2662 - page 94

    Y1 - 03 -0211 Rev D 90 5.2 A larm Cod es ID Description Text Cause/Source System Reaction / Remedy 01 AIS: Tx malfunction VHF Antenna, cabling Reaction: The transponde r unit stops trans mission. I f Alarm ID 01 and ID 02 are simultaneously displaye d, then a major antenna proble m has arisen. Remedy: Check if the antenna is AIS compatible (156-162 ...

  • ACR Electronics 2662 - page 95

    Y1 - 03 -0211 Rev D 91 56 AIS: ENTER MMSI NUMBER No valid MMSI entered.                  enter a vali ...

  • ACR Electronics 2662 - page 96

    Y1 - 03 -0211 Rev D 92 6 Contact and Support Informat ion Contact your loca l dealer for NAU T ICAS T suppo rt. Please see our AC R Website for Se rvice Listing. ACR Electronics Europe G mbH Handelskai 388 / Top 632 A- 10 20 Vienna, Aust ria Tel: +43 (1) 5 237 237 - 0 Fax: +43 (1) 5 237 237 - 150 Email: Techni cal.Support@ac r-europe.com Web: www.a ...

  • ACR Electronics 2662 - page 97

    Y1 - 03 -0211 Rev D 93 7 Appen dix 7.1 Explanation of com monly used Abbrev iati ons Abbreviation Full Text A/B (A+B) AIS Channel 1 / A IS Channel 2 ACK Acknowledgement AddrChM Addressed Channel Management AIS Automatic Identificati on System AIS_ChAs AIS Channel Assignm ent Sentence ALR Alarm AS Assigned ATIS Automatic Transm itter Identification ...

  • ACR Electronics 2662 - page 98

    7.2 ERI ship ty pes This table is used to automatically convert the selected UN ship types, which are used in Inland message 10, to the IMO type s which are used in IMO message 5. C ode U Ship Name Msg 5 (1- 99) Ship Ty p e - SOLA S Dig1 Dig2 Type (first dig it) Cargo (second digit) 8000 No Vessel, type un known 9 9 Other types of Ship No additiona ...

  • ACR Electronics 2662 - page 99

    code U ship name Msg 5 (1- 99) Ship Ty p e - SOLA S dig1 dig2 Type (first dig it) Cargo (Second digit) 8170 V Freightbarge w ith c ontainer s 8 9 Tanker No additional in formation 8180 V Tankbarge, ga s 9 0 Other types of Ship All ships of this type 8210 C Pushtow , one cargo barge 7 9 Cargo Ships No additional in formation 8220 C Pushtow , two car ...

  • ACR Electronics 2662 - page 100

    code U ship name Msg 5 (1- 99) Ship Ty p e - SOLA S dig1 dig2 Type (first dig it) Cargo (Second digit) 8441 V Ferry 6 9 Passenger Sips No additional in formation 8442 V Red cross ship 5 8 Medical tran sports - 8443 V Cruise ship 6 9 Passenger Sips No additional infor m ation 8444 V Passenger ship w ithout accomodation 6 9 Passenger Sips No addition ...

  • ACR Electronics 2662 - page 101

    7.3 Password Sett ings This AIS transponder has two level s of passw ord-       gives access t o use r -       ...

  • ACR Electronics 2662 - page 102

    ...

  • ACR Electronics 2662 - page 103

    ...

  • ACR Electronics 2662 - page 104

    ...

  • ACR Electronics 2662 - page 105

    ...

  • ACR Electronics 2662 - page 106

    ...

  • ACR Electronics 2662 - page 107

    ...

  • ACR Electronics 2662 - page 108

    ACR Electronics Europe Gm bH page 1 of 1 2008-08 EC - DoC Nautica st Inland AIS.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bes tätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 für maritime Ausrüstung, geändert durch die EC Council Dire ...

  • ACR Electronics 2662 - page 109

    ACR Electronics Europe GmbH page 1 of 1 2008-09 EC - DoC Co mrod AC17.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten ben annte Zubehör gleich oder besser dem im unt enstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifie s that the mention ...

  • ACR Electronics 2662 - page 110

    ACR Electronics Europe Gmb H page 1 of 1 2008-10 EC - DoC Comrod AV7.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten ben annte Zubehör gleich oder besser dem im unt enstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifie s that the mentione ...

  • ACR Electronics 2662 - page 111

    ACR Electronics Europe Gm bH page 1 of 1 2008-11 EC - DoC GPS Antenna AIS-A W.docx EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten ben annte Zubehör gleich oder besser dem im unt enstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifie s that the ...

Manufacturer ACR Electronics Category Marine RADAR

Documents that we receive from a manufacturer of a ACR Electronics 2662 can be divided into several groups. They are, among others:
- ACR Electronics technical drawings
- 2662 manuals
- ACR Electronics product data sheets
- information booklets
- or energy labels ACR Electronics 2662
All of them are important, but the most important information from the point of view of use of the device are in the user manual ACR Electronics 2662.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ACR Electronics 2662, service manual, brief instructions and user manuals ACR Electronics 2662. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ACR Electronics 2662.

A complete manual for the device ACR Electronics 2662, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ACR Electronics 2662 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ACR Electronics 2662.

A complete ACR Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ACR Electronics 2662 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ACR Electronics 2662, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ACR Electronics 2662, that we can find in the current document
3. Tips how to use the basic functions of the device ACR Electronics 2662 - which should help us in our first steps of using ACR Electronics 2662
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ACR Electronics 2662
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ACR Electronics 2662 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ACR Electronics 2662?

Use the form below

If you did not solve your problem by using a manual ACR Electronics 2662, ask a question using the form below. If a user had a similar problem with ACR Electronics 2662 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)