Manual Homelite UT43102

88 pages 9.72 mb
Download

Go to site of 88

Summary
  • Homelite UT43102 - page 1

    SA VE THIS MANUAL FOR FUTURE REFERENCE Y our electric chain saw has been engineered and manufactur ed to Homelite’ s high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance. W ARNING: T o reduce the risk of injury , the user must read and unde ...

  • Homelite UT43102 - page 2

    P age / P ágina 2  Introduction ....................................................................................................................................... 2 Introduction / Intr oducción   General Safety Rules ..................................................................................................................... ...

  • Homelite UT43102 - page 3

    P age 3 — English GENERAL SAFETY RULES W ARNING: Do not attempt to operate this unit until you have read thor oughly and understand com- pletely all instructions, safety information, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury . READ ALL INSTRUCTIONS BASIC SAF ...

  • Homelite UT43102 - page 4

    P age 4 — English transporting your chain saw, use the appropriate guide bar scabbard.  Never let anyone use your chain saw who has not received adequate instructions in its proper use. This applies to rentals as well as privately owned saws.  Before you start the unit, make sure the saw chain is not contacting any object.  Stop ...

  • Homelite UT43102 - page 5

    P age 5 — English GENERAL SAFETY RULES  Save these instructions. Refer to them fre - quently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also. W ARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi ...

  • Homelite UT43102 - page 6

    P age 6 — English GENERAL SAFETY RULES PULL PUSH Fig. 3 4. Use replacement parts such as low kickback chain, SAFE-T-TIP ® anti-kickback nose guards and special guide bars that reduce the risks associated with rotational kickback. Use only the replacement guide bars and low kickback chains specified by the manufac- turer for the saw.  With ...

  • Homelite UT43102 - page 7

    P age 7 — English SYMBOLS The following signal words and meanings ar e intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury . W ARNING: Indicates a potentially hazardous situation, which, if not ...

  • Homelite UT43102 - page 8

    P age 8 — English SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpr etation of these symbols will allow you to operate the pr oduct better and safer . SYMBOL NAME DESIGNA TION/EXPLANA TION W ear Gloves W ear non-slip, heavy-duty protective gloves when handling the chain sa ...

  • Homelite UT43102 - page 9

    P age 9 — English Before using any extensio n cord, inspect it for loose or exposed wires and cut or worn insulation. A proper extension cor d is available at an authorized service center . It is possible to tie the extension cord and power cord in a knot to pr event them fr om becoming disconnected during use. Make the knot as shown in figure 5, ...

  • Homelite UT43102 - page 10

    P age 10 — English GLOSSAR Y OF TERMS Bar Tip Guar d An attachment that may be provided on the end of the guide bar to prevent the chain at the end of the guide bar from contacting the wood. Bucking The process of cr oss cutting a felled tr ee or log into lengths. Chain Saw Powerhead A chain saw without the saw chain and guide bar . Clutch A mech ...

  • Homelite UT43102 - page 11

    P age 11 — English PRODUCT SPECIFICA TIONS FEA TURES UT43102 Bar length .................................................... 14 in. Chain pitch .............................................. .375 in. Chain gauge ............................................ .050 in. Chain type ........................ Low Pr ofile Skip T ooth Drive sprocket ...... ...

  • Homelite UT43102 - page 12

    P age 12 — English FEA TURES KNOW YOUR CHAIN SA W See Figure 6. The safe use of this product r equir es an under - standing of the information on the tool and in this operator’ s manual as well as a knowledge of the project you are attempting. Befor e use of this product, familiarize yourself with all operating features and safety rules. CHAIN ...

  • Homelite UT43102 - page 13

    P age 13 — English CHAIN LUBRICANT W ARNING: Do not connect to power supply until assembly is complete. Failure to comply could r esult in accidental starting and possible serious per - sonal injury . W ARNING: Do not attempt to modify this product or cr eate accessories not recommended for use with this product. Any such alteration or modificati ...

  • Homelite UT43102 - page 14

    P age 14 — English OPERA TION Stopping the chain saw: NOTE: It is normal for the chain to coast to a stop once the trigger switch is released.  Release the switch trigger to stop the chain saw.  Upon release of the switch trigger, the switch lock-out will be automatically reset to the lock position. PREP ARING FOR CUTTING PROPER GRIP ...

  • Homelite UT43102 - page 15

    P age 15 — English OPERA TION PROPER GRIP Fig. 10 IMPROPER GRIP W ARNING: DO NOT operate the switch trigger with your left hand and hold the front handle with your right hand. Never allow any part of your body to be in the chain line while operating a saw . Improper operation of the chain saw could r esult in seri- ous personal injury . CHAIN LIN ...

  • Homelite UT43102 - page 16

    P age 16 — English OPERA TION  Begin cutting with the saw against the log.  Keep the unit running the entire time you are cutting, maintain a steady speed.  Allow the chain to cut for you; exert only light downward pressure. Forcing the cut could result in damage to the bar, chain, or motor.  Release the switch trigger as ...

  • Homelite UT43102 - page 17

    P age 17 — English OPERA TION area around the tree and make sure there are no obstructions in your planned path of retreat. Clear the path of safe retreat approx imately 135° from the planned line of fall.  Consider the force and direction of the wind, the lean and balance of the tree, and the location of large limbs. These things influenc ...

  • Homelite UT43102 - page 18

    P age 18 — English OPERA TION W ARNING: Never cut through to the notch when making a back cut. The hinge controls the fall of the tree, this is the section of wood between the notch and backcut. REMOVING BUTTRESS ROOTS See Figure 17. A buttress r oot is a lar ge r oot extending from the trunk of the tree above the gr ound. Remove lar ge buttress ...

  • Homelite UT43102 - page 19

    P age 19 — English OPERA TION BUCKING WITH A WEDGE See Figure 19. If the wood diameter is lar ge enough for you to insert a soft bucking wedge without touching the chain, you should use the wedge to hold the cut open to prevent pinching. NOTE: When bucking or felling with a wedge, you may need to remove the SAFE-T-TIP anti-kickback device to allo ...

  • Homelite UT43102 - page 20

    P age 20 — English  Branches under tension should be cut from the bottom up to avoid binding the chain saw.  Keep the tree between you and the chain saw while limbing. Cut from the side of the tree opposite the branch you are cutting. PRUNING See Figure 24. Pruning is trimming limbs from a live tree.  Work slowly, keeping both hands on t ...

  • Homelite UT43102 - page 21

    P age 21 — English W ARNING: Before perfo rming any maintenance, make sure the tool is unplugged fr om the power supply . Failure to comply could result in accidental starting and possible serious personal injury . W ARNING: When servicing, use only identical Homelite replacement parts. Use of any other parts may create a hazar d or cause pr oduc ...

  • Homelite UT43102 - page 22

    P age 22 — English Fig. 31 BAR GROOVE CHAIN DRIVE LINKS Fig. 29 CUTTERS CHAIN ROT A TION CHAIN DRIVE LINKS Fig. 28 Fig. 30 CAUTION: Always wear gloves when handling the bar and chain; these components are sharp and may contain burrs. W ARNING: Never touch or adjust the chain while the motor is running. The saw chain is very sharp; always wear pro ...

  • Homelite UT43102 - page 23

    P age 23 — English MAINTENANCE  Remove the bar and chain from the mounting surface.  Remove the old chain from the bar.  Lay out the new saw chain in a loop and straighten any kinks. The cutters should face in the direction of chain rotation. If they face backwards, turn the loop over.  Place the chain drive links into the ...

  • Homelite UT43102 - page 24

    P age 24 — English MAINTENANCE  Stop the motor and disconnect from power supply before setting the chain tension.  Slightly loosen the chain cover lock knob.  Turn the chain tensioning knob clockwise to tension the chain . NOTE: A cold chain is correctly tensioned when there is no slack on the underside of the guide bar, the cha ...

  • Homelite UT43102 - page 25

    P age 25 — English MAINTENANCE SHARPENING THE CUTTERS See Figures 38 - 41. Be careful to file all cutters to the specified angles and to the same length, as fast cutting can only be obtained when all cutters are uniform. W ARNING: Before perfo rming any maintenance, make sure the tool is unplugged fr om the power supply . Failure to comply could ...

  • Homelite UT43102 - page 26

    P age 26 — English MAINTENANCE TOP PLA TE FILING ANGLE See Figure 42  CORRECT 30° – file holders are marked with guide marks to align file properly to produce correct top plate angle.  LESS THAN 30° – for cross cutting.  MORE THAN 30° – feathered edge dulls quickly. SIDE PLA TE ANGLE See Figure 43.  CORRECT 80° ? ...

  • Homelite UT43102 - page 27

    P age 27 — English RESTORE ORIGINAL SHAPE BY ROUNDING THE FRONT Fig. 46 MAINTENANCE MAINT AINING THE GUIDE BAR See Figure 47. W ARNING: Before perfo rming any maintenance, make sure the tool is unplugged fr om the power supply . Failure to comply could result in accidental starting and possible serious personal injury . Every week of use, r evers ...

  • Homelite UT43102 - page 28

    P age 28 — English MAINTENANCE NOTE: Do not r eplace the screw with an or dinary screw . Use only identical replacement parts from the manufacturer when r eplacing parts. In addition to preventing chain contact with solid objects at the nose of the bar , the SAFE-T -TIP also helps keep the chain away from abrasive surfaces, such as the ground. Ke ...

  • Homelite UT43102 - page 29

    P age 29 — English BAR AND CHAIN COMBINA TIONS Chain specifications: .375 in. pitch, low profile skip tooth, .050 in. chain gauge Length of Bar Guide Bar Part Number Chain Part Number Drive Links 14 in. 310625001 901212001 52 16 in. 310626001 901212002 56 TROUBLESHOOTING Pr oblem Possible Cause Solution Bar and chain running hot and smoking. Chec ...

  • Homelite UT43102 - page 30

    P age 30 — English LIMITED WARRANTY ST A TEMENT Homelite Consumer Products, Inc., (“Homelite”) warrants to the original retail pur chaser that this HOMELITE brand outdoor product is fr ee from defect in material and workmanship and agrees to r epair or replace, at Homelite’ s, discretion, any defective pr oduct free of char ge within these ...

  • Homelite UT43102 - page 31

    P age 3 — F r ançais A VERTISSEMENT : Ne pas essayer d’utiliser cet outil avant d’avoir lu entièrement et b ien compris toutes les instructions, règles de sécurité, etc., contenues dans ce manuel. Le non respect de ces informations peut entraîner un accident tel qu’un incendie ou un choc électrique entraînant des blessures graves. L ...

  • Homelite UT43102 - page 32

    P age 4 — F r ançais RÈGLES DE SÉCURITÉ GÉNÉRALES  Rester vigilant et être attentif au travail. Utiliser l’outil avec bon sens.  Garder toutes les parties du corps à l’écart de la scie à chaîne lorsque le moteur tourne.  Toujours transporter la scie par la poignée avant, outil débranché, chaîne et guide dirig? ...

  • Homelite UT43102 - page 33

    P age 5 — F r ançais RÈGLES DE SÉCURITÉ GÉNÉRALES  Conserver ces instructions. Les consulter fréquemment et les utiliser pour instruire les aut res utilisateurs éventuels. Si cet produit est prêté, il doit être accompagné de ces instructions. A VERTISSEMENT : La poussière dégagée lors du ponçage, sciage, meulage, perçage de ...

  • Homelite UT43102 - page 34

    P age 6 — F r ançais Fig. 4 SAFE-T -TIP ® RÈGLES DE SÉCURITÉ GÉNÉRALES TRACTION POUSSÉE Fig. 3 3. Toujours couper av ec le moteur en fonctionnement. Serrer la gâchette à fond e t maintenir la vitesse de coupe. 4. Utiliser des pièces de rechange telles que chaînes à faible rebond, protection d’extrémité antirebond SAFE-T-TIP® et ...

  • Homelite UT43102 - page 35

    P age 7 — F r ançais SYMBOLES Certains des symboles ci-dessous peuvent être utilisés sur ce pr oduit. V eiller à les étudier et à apprendre leur signification. Une interprétation correcte de ces symboles permettra d’utiliser ce pr oduit plus ef ficacement et de réduire les risques. SYMBOLE NOM DÉSIGNA TION / EXPLICA TION Symbole d’al ...

  • Homelite UT43102 - page 36

    P age 8 — F r ançais SYMBOLES Es posible que se empleen en este producto algunos de los siguientes símbolos. Le suplicamos estudiarlos y aprender su significado. Una corr ecta interpretación de estos símbolos le permitirá utilizar mejor y de manera más segura la producto. SÍMBOLO NOMBRE DENOMINACIÓN / EXPLICACIÓN Póngase guantes Al mane ...

  • Homelite UT43102 - page 37

    P age 9 — F r ançais Il est possible de se procur er une rallonge électrique appropriée dans un centr e de service autorisé. Il est possible d’attacher le cordon d’alimentation et le cordon pr olongateur par un noeud pour éviter qu’ils se détachent pendant l’utilisation. Faites le noeud comme illustré dans la figure 5 et branchez l ...

  • Homelite UT43102 - page 38

    P age 10 — F r ançais GLOSSAIRE Protection de nez de guide Accessoire pouvant êtr e monté à l’extrémité du guide pour empêcher que la chaîne ne contacte le bois à cet endroit. T ronçonnage Coupe transversale d’un arbre abattu ou d’une bille de bois pour le débiter en tronçons. Bloc moteur de scie à chaîne Scie à chaîne sans ...

  • Homelite UT43102 - page 39

    P age 11 — F r ançais SPÉCIFICA TIONS CARACTÉRISTIQUES UT43102 Longueur du guide ......................... 356 mm (14 po) Pas de la chaîne ........................ 9,5 mm (0,375 po) Épaisseur de la chaîne ............. 1,27 mm (0,050 po) T ype de chaîne ....... Dents bas profil à saut intégral Pignon d’entraînement ................... ...

  • Homelite UT43102 - page 40

    P age 12 — F r ançais CARACTÉRISTIQUES POUR SE F AMILIARISER A VEC LA SCIE À CHAÎNE V oir le figure 6. L ’utilisation sûre de ce produit exige une comprehension des r enseignements figurant sur l’outil et contenus dans le manuel d’utilisation, ainsi qu’une bonne connaissance du projet entrepris. Avant d’utiliser ce pr oduit, se fam ...

  • Homelite UT43102 - page 41

    P age 13 — F r ançais A VERTISSEMENT : Ne pas essayer de modifier ce produit ou de créer des accessoir es non recommandés pour ce produit. De telles altérations ou modifications sont considérées comme un usage abusif et peuvent créer des conditions danger euses, risquant d’entraîner des blessures graves. ASSEMBLAGE A VERTISSEMENT : Ne p ...

  • Homelite UT43102 - page 42

    P age 14 — F r ançais CORDON PROLONGA TEUR UTILISA TION Fig. 9  Pour le fonctionnement continu, appuyer sur la gâchette, désengager le bouton de verrouillage et maintenir la gâchette enfoncée. Arrêt de la scie à chaîne : NOTE : Il est normale que la chaîne continue de tourner jusqu’à l’arrêt une fois la gâchette relâchée. ...

  • Homelite UT43102 - page 43

    P age 15 — F r ançais A VERTISSEMENT : Ne jamais utiliser une prise gauchèr e (mains inversées) ou une position qui placerait le bras ou le corps en travers de la ligne de chaîne.  T oujours maintenir correctement la scie lorsque le moteur tourne. Les doigts doivent entourer la poignée, le pouce étant passé au-dessous. Avec cette pri ...

  • Homelite UT43102 - page 44

    P age 16 — F r ançais UTILISA TION  Appuyer sur le bouton de verrouillage de commutateur, appuyer sur la gâchette, relâcher le bouton de verrouillage de commutateur et laisser la chaîne parvenir à plein vitesse avant de commencer la coupe.  Commencer la coupe avec la scie appuyée contre la bille.  Maintenir un régime mote ...

  • Homelite UT43102 - page 45

    P age 17 — F r ançais UTILISA TION  L’utilisateur doit rester du côté surélevé du terrain puisque l’arbre risque de rouler ou de glisser après avoir été abattu.  Prévoir un chemin de r epli (ou plusieurs, en cas où le chemin prévu serait bloqué). Déblayer les alentours immédiats de l’arbr e et s’assurer qu’ aucun ...

  • Homelite UT43102 - page 46

    P age 18 — F r ançais UTILISA TION  Se méfier des chutes de branches et regarder où on met les pieds. A VERTISSEMENT : Ne jamais couper l’entaille d’abattage jusqu’au sifflet. La charnière, qui est la sectio n de bois laissée intacte entre le trait d’abattage et le sif flet contrôle la chute de l’arbre. ÉLIMINA TION DES RAC ...

  • Homelite UT43102 - page 47

    P age 19 — F r ançais UTILISA TION NOTE : Lorsque des coins sont utilisés pour l’entaille ou l’abattage, il peut être nécessair e de r etirer la gar de antirebond SAFE-T -TIP afin de pouvoir tirer la lame au travers de la section. Une fois la coupe effectuée, remettr e la gar de en place. DÉBIT AGE DE BILLES SOUS CONTRAINTE V oir la fig ...

  • Homelite UT43102 - page 48

    P age 20 — F r ançais ÉLAGAGE V oir la figure 24. L ’élagage consiste à couper les branches d’un arbre sur pied.  Travailler lentement et tenir la scie fermement à deux mains. Toujours veiller à se tenir bien campé et en équilibre sur les deux pieds.  Ne pas utiliser la scie en se tenant sur une échelle, ce qui est extrêmement ...

  • Homelite UT43102 - page 49

    P age 21 — F r ançais A VERTISSEMENT : Avant d’ef fectuer tout entr etien, s’assur er que l’outil est débranché. Le non respect de cet avertissement peut causer un démarrage accidentel, entraînant des blessures graves. A VERTISSEMENT : Utiliser exclusivement des pièces Homelite identiques à celles d’origine pour les réparations. L ...

  • Homelite UT43102 - page 50

    P age 22 — F r ançais RAINURE DU GUIDE MAILLONS D’ENTRAÎNEMENT DENTS ROT A TION DE LA CHAÎNE MAILLONS D’ENTRAÎNEMENT Fig. 28 A TTENTION : T oujours porter des gants lors de la manipulation du guide et de la chaîne qui sont tranchants et peuvent présenter des bavures. A VERTISSEMENT : Ne jamais toucher ou régler la chaîne lorsque le mo ...

  • Homelite UT43102 - page 51

    P age 23 — F r ançais ENTRETIEN  Retirer le guide et la barr e de leur support.  Retirer la chaîne usée du guide.  Former une boucle avec la nouvelle chaîne et éliminer les entortillements. Les gouges doivent être orientées dans le sens de r otation de la chaîne. Si elles sont orientées dans le sens contraire, r etourne ...

  • Homelite UT43102 - page 52

    P age 24 — F r ançais ENTRETIEN  Desserre légèrement couvercle de chaîne de bouton de verrouillage.  T our ner la bouton de tension vers la droite po ur tendre la chaîne. NOTE : Une chaîne froide est correctement tendue lorsqu’elle ne présente pas de mou au dessous du guide et qu’elle est bien serrée mais peut cependant ê ...

  • Homelite UT43102 - page 53

    P age 25 — F r ançais ENTRETIEN NOTE : Lors du remplacement de la chaîne, s’assurer que le pignon d’entraînement n’est ni usé, ni endommagé. En cas de signes d’usure ou de dommages aux endroits indiqués, faire r emplacer le pignon dans un centre de réparation agréé. NOTE : Si les instructions d’affûtage de la chaîne ne sont p ...

  • Homelite UT43102 - page 54

    P age 26 — F r ançais A TTENTION : Une chaîne émoussée ou incorrectement affûtée peut causer un régime excessif du moteur pendant la coupe et l’endommager gravement. A VERTISSEMENT : Un affûtage incorr ect de la chaîne accr oît le risque de rebond, ce qui peut causer des blessures graves. A VERTISSEMENT : L ’utilisation d’une cha? ...

  • Homelite UT43102 - page 55

    P age 27 — F r ançais LIME PLA TE COUPLEUR DE LIMITEUR DE PROFONDEUR Fig. 45 RENDRE LA FORME D’ORIGINE EN ARRONDISSANT L’A V ANT Fig. 46 ENTRETIEN MAINTIEN DU JEU DU LIMITEUR DE PROFONDEUR V oir les figures 44 à 46.  Le jeu du limiteur de pr ofondeur doit être maintenu à 0,6 mm (0,025 po). Util iser une jauge de profondeur pour vér ...

  • Homelite UT43102 - page 56

    P age 28 — F r ançais ENTRETIEN  Installer la gar de SAFE-T -TIP sur l’extrémité du guide.  Engager le rivet ou tenon de verr ouillage dans le trou à évidement du guide.  Serrer la vis avec la clé jusqu’à ce que sa tête fasse contact.  Une fois que la tête est en contact, donner 3/4 de tour supplémentaire. ENTRETIE ...

  • Homelite UT43102 - page 57

    P age 29 — F r ançais COMBINAISONS DE GUIDE ET CHAÎNE Caractéristiques de la chaîne : pas de 9,5 mm (0,375 po), dents bas profil à saut intégral, calibr e de 13 mm (0,050 po) Longueur N° de référence N° de référence Maillons du guide du guide de la chaîne d’entraînement 14 po 310625001 901212001 52 16 po 310626001 901212002 56 DÉ ...

  • Homelite UT43102 - page 58

    P age 30 — F r ançais GARANTIE DÉCLARA TION DE GARANTIE LIMITÉE Homelite Consumer Products, Inc. (« Homelite ») garantit à l’acheteur original au détail que ce produit de plein air de marque HOMELITE est exempt de tout vice de matériau ou de fabrication et s’engage à réparer ou r emplacer , à discrétion, tout produit s’avérant ...

  • Homelite UT43102 - page 59

    P ágina 3 — Español ADVER TENCIA: No intente utilizar esta unidad sin haber leído detenidamente y compr endido completamente todas las instrucciones, información de seguridad, etc. incluidas en este manual. El incumplimiento de lo anterior puede causar accidentes como incendios, descar gas eléctricas o lesiones corporales graves. LEA TODAS L ...

  • Homelite UT43102 - page 60

    P ágina 4 — Español REGLAS DE SEGURIDAD GENERALES  Mantenga todas las partes del cuerpo alejadas de la cadena de la sierra cuando esté funcionando la unidad.  Siempre porte la motosierra por el el mango delantero, con la unidad desconectada y la barra guía y la cadena de la sierra por atrás. Al transportar la motosierra, use la f ...

  • Homelite UT43102 - page 61

    P ágina 5 — Español REGLAS DE SEGURIDAD GENERALES   Guarde estas instrucciones. Consúltelas con frecuencia y empléelas para instruir a otras personas que puedan utilizar esta producto. Si presta a alguien esta producto, facilítele también las instrucciones. ADVER TENCIA: Algunos polvos generados al efectuarse operaciones de lijado, as ...

  • Homelite UT43102 - page 62

    P ágina 6 — Español Fig. 4 SAFE-T -TIP ® REGLAS DE SEGURIDAD GENERALES TIRÓN EMPUJE Fig. 3 4. Utilice piezas de repuesto como la cadena de bajo contragolpe, la protección anticontragolpe SAFE- T-TIP® de la punta y las barras guía especiales, los cuales reducen los riesgos relacionados con el contragolpe rotatorio. Sólo use las barras guí ...

  • Homelite UT43102 - page 63

    P ágina 7 — Español SÍMBOLOS Es posible que se empleen en este producto algunos de los siguientes símbolos. Le suplicamos estudiarlos y aprender su significado. Una corr ecta interpretación de estos símbolos le permitirá utilizar mejor y de manera más segura la producto. SÍMBOLO NOMBRE DENOMINACIÓN / EXPLICACIÓN Alerta de seguridad Ind ...

  • Homelite UT43102 - page 64

    P ágina 8 — Español SÍMBOLOS Es posible que se empleen en este producto algunos de los siguientes símbolos. Le suplicamos estudiarlos y aprender su significado. Una corr ecta interpretación de estos símbolos le permitirá utilizar mejor y de manera más segura la producto. SÍMBOLO NOMBRE DENOMINACIÓN / EXPLICACIÓN Póngase guantes Al man ...

  • Homelite UT43102 - page 65

    P ágina 9 — Español Se puede hacer un nudo para atar el cordón de extensión y el cordón eléctrico para impedir que se desconecten durante el uso. Ate el nudo como se muestra en la figura 5, luego conecte el extremo de la clavija del cor dón eléctrico en el extremo del r eceptáculo del cor dón de extensión. Este método también se pued ...

  • Homelite UT43102 - page 66

    P ágina 10 — Español GLOSARIO DE TÉRMINOS Protección de la punta de la barra Es un accesorio que puede suministrarse montado en el extremo de la barra guía, y cuyo objetivo es evitar que la cadena toque la madera en el extremo de la barra guía. T ronzado Es el proceso de cortar transversalmente un árbol o tronco talado en tramos. Cabeza mo ...

  • Homelite UT43102 - page 67

    P ágina 11 — Español ESPECIFICACIONES DEL PRODUCTO CARACTERÍSTICAS UT43102 Longitud de la barra ....................... 356 mm (14 pulg.) Paso de la cadena ..................... 9,5 mm (0,375 pulg.) Calibre de la cadena.................1,27 mm (0,050 pulg.) Tipo de cadena .......................... Dientes de bajo perfil de gar ganta ancha gra ...

  • Homelite UT43102 - page 68

    P ágina 12 — Español CARACTERÍSTICAS F AMILIARÍCESE CON LA MOTOSIERRA V ea la figura 6. Para usar este producto con la debida seguridad se debe comprender la información indicada en la herramienta misma y en este manual, y se debe comprender también el trabajo que intenta r ealizar . Antes de usar este producto, familiarícese con todas las ...

  • Homelite UT43102 - page 69

    P ágina 13 — Español ADVER TENCIA: No intente modificar este pr oducto ni hacer accesorios no recomendados para la misma. Cualquier alteración o modificación constituye maltrato el cual puede causar una condición peligrosa, y como consecuencia posibles lesiones corporales serias. ARMADO ADVER TENCIA: No conecte la unidad al suministro de cor ...

  • Homelite UT43102 - page 70

    P ágina 14 — Español CORDÓN DE EXTENSIÓN FUNCIONAMIENTO Apagado de la motosierra: NOTA: Es normal que la cadena siga desplazándose por inercia después de soltar el gatillo del interruptor.  Suelte el gatillo cuando desee apagar la motosierra.  Al soltar el gatillo, el seguro de apagado del interruptor regresa automáticamente a ...

  • Homelite UT43102 - page 71

    P ágina 15 — Español ADVER TENCIA: Nunca sujete la unidad con la posición de las manos intercambiada, ni con el cuerpo en ninguna postura que pueda colocar el mismo o el brazo a través del plano de la cadena.  Mantenga una sujeción adecuada de la sierra siempre que esté funcionando el motor . Los dedos deben rodear el mango, con el pu ...

  • Homelite UT43102 - page 72

    P ágina 16 — Español Fig. 12 FUNCIONAMIENTO  Inicie el corte poniendo la sierra contra el tronco.  Mantenga encendida la unidad todo el tiempo que esté cortando; mantenga una velocidad uniforme.  Permita que la cadena efectúe el corte; sólo aplique una leve presión hacia abajo. Si fuerza el corte, puede dañarse la barra, ...

  • Homelite UT43102 - page 73

    P ágina 17 — Español FUNCIONAMIENTO   Periódicamente eche un vistazo a la copa del árbol durante el corte trasero, para asegurarse de que caiga en la dirección deseada.  Si el árbol comienza a caer en una dir ección equivocada, o si la sierra se pellizca o queda colgada en el tronco durant e la caída del árbol, ¡deje la s ...

  • Homelite UT43102 - page 74

    P ágina 18 — Español FUNCIONAMIENTO  Con los árboles de diámetro grande, detenga el corte trasero antes de llegar a una pr ofundidad tal, que el árbol pudiese caer o asentarse en la cepa. Después intr oduzca cuñas de madera o plástico suaves en el corte, de manera que no toquen la cadena. Encaje las cuñas poco a poco, como ayuda para ...

  • Homelite UT43102 - page 75

    P ágina 19 — Español FUNCIONAMIENTO motosierra al cortar a través del tr onco, afloje la presión de co rte cerca del final del corte sin dis minuir la fuerza de sujeción de los mangos de la sierra. No permita que la cadena toque el suelo. Después de terminar el corte, espere a que se detenga la cadena antes de mover la motosierra. Siempre a ...

  • Homelite UT43102 - page 76

    P ágina 20 — Español  Deje las ramas de soporte más grandes bajo el árbol para mantenerlo separado del suelo mientras efectúa los cortes.  Solamente corte una rama a la vez. Retire las ramas cortadas del área de trabajo con frecuencia para mantener el área de trabajo limpia y segura.  Las ramas bajo tensión deben cortarse de abaj ...

  • Homelite UT43102 - page 77

    P ágina 21 — Español ADVER TENCIA: Antes de efectuar cualquier tarea d e mantenimiento, asegúrese de que la herramienta esté desconectada del suministro de corriente. De lo contrario la unidad puede ponerse en marcha accidentalmente, con el consiguiente riesgo de lesiones corporales serias. ADVER TENCIA: Al dar servicio a la unidad, sólo uti ...

  • Homelite UT43102 - page 78

    P ágina 22 — Español RANURA DE LA BARRA ESLABONES DE IMPULSIÓN DE LA CADENA PRECAUCIÓN: Siempre póngase guantes la manipular la barra y la cadena; estos componentes han sido afilados y pueden contener rebabas. ADVER TENCIA: Nunca toque ni ajuste la cadena mientras esté funcionando el motor . La cadena de la sierra está sumamente afilada; s ...

  • Homelite UT43102 - page 79

    P ágina 23 — Español MANTENIMIENTO  Retire la barra y la cadena de la superficie de montaje.  Retire la cadena vieja de la barra.  Extienda la nueva cadena de la sierra en un círculo y ender ece todo r etor cimiento presente en la misma. Los dientes de corte deben estar orientados en la dirección de desplazamiento de la cade ...

  • Homelite UT43102 - page 80

    P ágina 24 — Español MANTENIMIENTO  Afloje levemente tapa del cadena de perilla de bloqueo.  Gire a la derecha el perilla de tensado de la cadena para tensar ésta. NOT A: La cadena, estando fría, está bien tensada cuando no hay holgura de la misma en la parte inferior de la barra guía, la cadena se siente bien ajustada en la bar ...

  • Homelite UT43102 - page 81

    P ágina 25 — Español MANTENIMIENTO por el lodo o la arena pr esentes en la madera, permita que afilen la cadena en un centro de servicio autorizado. NOT A: Al cambiar la cadena, inspeccione la rueda dentada de impulsión para ver si tiene desgaste o daños. Si hay señales de desgaste o daños presentes en las áreas indicadas, lleve la sierra ...

  • Homelite UT43102 - page 82

    P ágina 26 — Español MANTENIMIENTO dirección. Después lleve la lima al otr o lado y lime los dientes de corte derechos en la dir ección opuesta.  Con un cepillo de alambre limpie las limaduras producidas por la lima. PRECAUCIÓN: Si la cadena está desafilada o mal afilada, durante el corte puede causar una velocidad excesiva del motor ...

  • Homelite UT43102 - page 83

    P ágina 27 — Español LIMA PLANA IGUALADOR DE CALIBRES DE PROFUNDIDAD Fig. 45 REST ABLEZCA LA FORMA ORIGINAL REDONDEANDO LA P AR TE FRONT AL Fig. 46 MANTENIMIENTO calibres de pr ofundidad para verificar los espacios libres de los mismos.  Cada vez que se lima la cadena verifique el espacio libre de los calibr es de pr ofundidad.   ...

  • Homelite UT43102 - page 84

    P ágina 28 — Español MANTENIMIENTO  De donde quedó ajustado, con una llave apriételo 3/4 de vuelta más. MANTENIMIENTO DE LA PROTECCIÓN SAFE-T -TIP DE LA PUNT A V ea las figuras 47 y 48. ADVER TENCIA: Aunque la barra guía viene con una protección anticontragolpe SAFE-T -TIP ya montada, verifique el apriete del tornillo de montaje cada v ...

  • Homelite UT43102 - page 85

    P ágina 29 — Español COMBINACIONES DE BARRA Y CADENA Especificaciones de la cadena: 9,5 mm (0,375 pulg.), de paso dientes de bajo perfil de gar ganta ancha grande, 1,3 mm (0,050 pulg.) de calibre Longitud Núm. pieza Núm. pieza Eslabones barra barra guía cadena de impulsión 14 po 310625001 901212001 52 16 po 310626001 901212002 56 SOLUCIÓN ...

  • Homelite UT43102 - page 86

    P ágina 30 — Español GARANTÍA DECLARACIÓN DE LA GARANTÍA LIMIT ADA Homelite Consumer Products, Inc. garantiza al comprador original al menudeo que este producto para uso en el exterior HOMELITE carece de defectos en materiales y mano de o bra y acuerda r eparar o reemplazar , a la sola discreción de Homelite, cualquier producto defectuoso s ...

  • Homelite UT43102 - page 87

    P age / P ágina 31 NOTES / NOT AS ...

  • Homelite UT43102 - page 88

    988000-402 11-24-10 (REV :01) HOMELITE CONSUMER PRODUCTS, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 1-800-242-4672 • www .homelite.com W ARNING: This product may contain chemi- cals, including lead, known to the State of California to cause cancer , birth defects, or other repr oductive harm. W ash hands after handling. SERVICE For parts o ...

Manufacturer Homelite Category Chainsaw

Documents that we receive from a manufacturer of a Homelite UT43102 can be divided into several groups. They are, among others:
- Homelite technical drawings
- UT43102 manuals
- Homelite product data sheets
- information booklets
- or energy labels Homelite UT43102
All of them are important, but the most important information from the point of view of use of the device are in the user manual Homelite UT43102.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Homelite UT43102, service manual, brief instructions and user manuals Homelite UT43102. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Homelite UT43102.

A complete manual for the device Homelite UT43102, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Homelite UT43102 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Homelite UT43102.

A complete Homelite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Homelite UT43102 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Homelite UT43102, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Homelite UT43102, that we can find in the current document
3. Tips how to use the basic functions of the device Homelite UT43102 - which should help us in our first steps of using Homelite UT43102
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Homelite UT43102
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Homelite UT43102 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Homelite UT43102?

Use the form below

If you did not solve your problem by using a manual Homelite UT43102, ask a question using the form below. If a user had a similar problem with Homelite UT43102 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)