Manual Leica MZ16 FA

16 pages 0.5 mb
Download

Go to site of 16

Summary
  • Leica MZ16 FA - page 1

    Leica Lamp housing and mercury burner lamp User Manual ...

  • Leica MZ16 FA - page 2

    2 Leica lamp housing and mercury burner T able of contents Page 1. Safety concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ...

  • Leica MZ16 FA - page 3

    1.1 Description 1.2 Safety precautions For the Leica MZ16 FA 3 Leica lamp housing and mercury burner 1. Safety concept The Leica 106 z lamp housing is the light source for the fluorescence stereomicroscope Leica MZ16 F A as well as the fluorescence module for Leica stereomicroscopes. The Leica lamp housing is used with 100W or 50W mercury burners, ...

  • Leica MZ16 FA - page 4

    Lamp housing The Leica MZ16 F A fluorescence stereomicroscope and the fluorescence module for Leica stereomicroscopes may only be used in combination with the Leica lamp housing for 100W or 50W mercury burners, their corresponding supply units and stray-light protection. Leica Microsystems accepts no liability for damages resulting from the use of ...

  • Leica MZ16 FA - page 5

    Supply units The 100W mercury burners are powered by the ebq 100 supply unit. Read the separate instruction manual provided with this supply unit. The supply unit for 50W mercury burners is described in this manual. For the ebq supply unit: only fuses of the specified type with the listed rated current may be used. Using other fuses or bridging the ...

  • Leica MZ16 FA - page 6

    • Use the stray-light protection. Danger to eyes from UV radiation. • During assembly work on xenon burners, always wear the protective gloves and face protection provided. Risk of explosion • Electrical components must be assembled at least 10 cm away from the wall and from flammable substances. UV radiationwarning UV radiation can harm the ...

  • Leica MZ16 FA - page 7

    The Leica Microsystems 106 z lamp housing is used. If the 105 z lamp housing model is available, it can also be used. Follow the safety instructions! The following gas discharge lamps can be used. They require different types of lamp mounts. Order No. T ypical Life 500 137 50W high-pressure mercury burner 100 hrs. (alternating current) 500 138 100W ...

  • Leica MZ16 FA - page 8

     Unscrew the 2 hexagon-head screws.  Carefully pull out the base with lamp mount and connecting cable.  Unscrew the top Phillips screw .  Pull up the cooling element and pull it to the side.  Unscrew the bottom clamping system.  Remove the transport anchor and store it for later transport.  When replacing burners, remove the us ...

  • Leica MZ16 FA - page 9

     Adjust the collector on a trial basis using the focusing knob. • During this process, the collector may not come into contact with the flexible power supply . If necessary , bend the power supply away from the collector .  Carefully close the lamp housing and make sure that the contact plug is set firmly in the socket.  Gently push in t ...

  • Leica MZ16 FA - page 10

     Unscrew the hexagon-head screw on the adapter part using an Allen key .  Insert the lamp housing into the adapter part and tighten the hexagon-head screw . Between the lamp housing and the lamp base, there are gaps through which UV light escapes, and which can temporarily irradiate the hands of the user when handling objects under the lamp h ...

  • Leica MZ16 FA - page 11

     Pull the focusing knob outward.  Carefully replace the collector and push it to the left until the focusing knob comes to a stop in the guide groove.  Adjust the collector on a trial basis.  Reinstall the lamp base and close the lamp housing. Insert the collector 11 Leica lamp housing and mercury burner ...

  • Leica MZ16 FA - page 12

    4.1 Supply unit for lamp housing 106 z with 50W mercury lamp 12 Leica lamp housing and mercury burner T ype 301-185.003/10372 Input: 220V/240V ±10% 220V ~ 50/60Hz Hg 50W L1/L2 Osram No. 0-958 P . Max. 320V A 1. On/off switch 2. Operating time meter 3. Switching between L1 and L2 burners 4. Safety starter 5. Switching between 50Hz/60Hz 6. Lamp conn ...

  • Leica MZ16 FA - page 13

    T o minimize the risk of explosion, replace a discolored high-pressure mercury burner promptly when it has reached the end of its rated life. Follow the manufacturer’ s specifications and the minute meter on the supply unit!  Switch on the supply unit. The safety starter ignites the burner . If the burner does not ignite after several attempts ...

  • Leica MZ16 FA - page 14

    14 Leica lamp housing and mercury burner After installing the mercury burner , adjust it exactly as de- scribed. Never let the bright tips of the electric arcs, the focal spots, cross when projected. Danger of explosion from overheating Adjustment is also important to obtain a homogenous light surface and good fluorescence. When adjusting the mirro ...

  • Leica MZ16 FA - page 15

    15 Leica lamp housing and mercury burner 3 2 1 5 4 6 Hg 50W Hg 100W Fig. a: Focus the arc. Fig. b: Position the arc at the crosshairs. Fig. c: Focus and position the second arc. ...

  • Leica MZ16 FA - page 16

    Leica Microsystems – the brand for outstanding products Leica Microsystems – an international company with a strong network of customer services Australia: Gladesville, NSW T e l. +1 800 625 286 Fax +61 2 9817 8358 Austria: Vienna T e l. +43 1 486 80 50 0 Fax +43 1 486 80 50 30 Canada: Richmond Hill/Ontario Tel. +1 905 762 20 00 Fax +1 905 762 ...

Manufacturer Leica Category Indoor Furnishings

Documents that we receive from a manufacturer of a Leica MZ16 FA can be divided into several groups. They are, among others:
- Leica technical drawings
- MZ16 FA manuals
- Leica product data sheets
- information booklets
- or energy labels Leica MZ16 FA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Leica MZ16 FA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Leica MZ16 FA, service manual, brief instructions and user manuals Leica MZ16 FA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Leica MZ16 FA.

Similar manuals

A complete manual for the device Leica MZ16 FA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Leica MZ16 FA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Leica MZ16 FA.

A complete Leica manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Leica MZ16 FA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Leica MZ16 FA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Leica MZ16 FA, that we can find in the current document
3. Tips how to use the basic functions of the device Leica MZ16 FA - which should help us in our first steps of using Leica MZ16 FA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Leica MZ16 FA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Leica MZ16 FA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Leica MZ16 FA?

Use the form below

If you did not solve your problem by using a manual Leica MZ16 FA, ask a question using the form below. If a user had a similar problem with Leica MZ16 FA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)