English dropdown-ico

Manual Barco R9001960

127 pages 4.2 mb
Download

Go to site of 127

Summary
  • Barco R9001960 - page 1

    INTELLIG ENT DISPLA YS B ARCO R EALIT Y 6500 R900 196 0 R900 196 9 O WNER ’ S M ANUAL 30012001 R 597618 2/01 ...

  • Barco R9001960 - page 2

    Barco nv Media Noordlaan 5, 8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: media@barco.com Visi t us at the web: www .barco. com Printed in Belgium ...

  • Barco R9001960 - page 3

    Copyright © All rights reserved. No part of this documen t may be copied, re produced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the pr ior written consent of BARCO. Changes Barco provides this manual “as is” without warrant y of any kind, either expressed or implied, including but no ...

  • Barco R9001960 - page 4

    ...

  • Barco R9001960 - page 5

    T able o f conten ts T ABLE OF CON TENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ...... .... .... .... .... .... ...... .... .... .... .... .... ...... .... .... .... .... .... ...... .... 5 1 . 1 B o x c o n t e n t .................... ..................................... .............................. ....................... ........... ...

  • Barco R9001960 - page 6

    T a ble o f content s 7 . 2 . 5 . 1 . S t a r t u p ................. .............................. ....................... .............................. ............ ... 4 5 7.2.5.2. Changing the settings . . .............................. .............................. ....................... ............... 4 5 7 . 2 . 5 . 3 . C o r r e c t v ...

  • Barco R9001960 - page 7

    T able o f conten ts 9 . 6 . 3 C o m m o n A d d r e s s ............................. .............................. ....................... ........................... ... 8 0 9.7 Change Baudrate PC . ............... .............................. ....................... .............................. ............... 8 1 9 . 8 R e s e t L a m p R ...

  • Barco R9001960 - page 8

    T a ble o f content s 4 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 9

    1. Packag ing and Dimensio ns 1. P ACKAGING AND DIMENSIONS This chapter handles about the way the projector is packed and gives an ov erview of the di mensions. • Box content • Projector Packaging • Lens Packaging • Dimensions 1.1 B ox con ten t CEE7 European power plug to connect the power cord to t he wall outlet. ANSI 73.11 American powe ...

  • Barco R9001960 - page 10

    1. Packaging a nd Dime nsions 1.3 Lens P ackaging W a y of Pac kaging Lenses are supplied as an individual i tem. They are packed in a carton box. 1.4 Di mensions Dimensions o verview Dimensions are given in m m (1 inch = 25.4 m m) Image 1-2 Front view dimensi ons project or 6 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 11

    1. Packag ing and Dimensio ns Image 1-3 Side view dimensi ons projector Image 1-4 T op view dimensions proj ector R5976182 BARCOREALITY 6500 30012001 7 ...

  • Barco R9001960 - page 12

    1. Packaging a nd Dime nsions 8 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 13

    2. Installa tion G uidel ines 2. INST ALLA TION GUIDELINES Overview • Installation guidelines • Configuration • Lenses • Batteries Before installin g the projector , read first the safet y instructions. 2.1 Installa tion guidelines Ambient T emperature Condit ions. Careful considerati on of things such as i mage size, am bient light level, ...

  • Barco R9001960 - page 14

    2. Install ation Guid eline s and lightest parts of the image. With bigger screens, the ‘wash out’ becomes m ore important. As a general rule, darken the room to the point where there is just suf ficient light to read or write comfortably . Spot lighting is desirable for ill u minating small areas so that interference with t he screen is minima ...

  • Barco R9001960 - page 15

    2. Installa tion G uidel ines Image 2-1 B Distance between ceiling and top of the sc reen or between floor and bottom of the sc reen. A Correction value, distance betwe en bottom side of projector (without feet) and middle of the lens. V alue to be subtracted from B to obtain the correct inst a llation position. (A v alue is a constant value for al ...

  • Barco R9001960 - page 16

    2. Install ation Guid eline s 2.3.1 Lenses A vai lable lense s The following lenses are available, or w ill become available (contact a BARCO service center) as an option : Lenses Standard version QFD(1.27:1) R9840400 QFD(2.5:1) R9840290 QFD(1.4-2.1:1) R9840380 QFD(2.1-3.0:1) R9840390 QFD(3.5-4.5:1) R9840060 QFD(4.5-6.0:1) R9840100 QFD(7:1) R984041 ...

  • Barco R9001960 - page 17

    2. Installa tion G uidel ines 2.3.4 Lens in stallatio n How to install ? Follow the next procedure : 1. Open the lens cover of the projector by pivoting it up and take it off. (image 2-2) 2. Pull the lens locks l evers backwards to open the lens locks. (image 2-3) 3. Put the lens on t he lens holder . (image 2-4) 4. Push the lens locks back in posi ...

  • Barco R9001960 - page 18

    2. Install ation Guid eline s Necessary t ools To r a y s e e TM cloth (delivered together with the lens kit). Order number : R379058. H o wt o c l e a nt h el e n s? Proceed as follow : 1. Always wipe lenses with a CLEAN T oraysee TM cloth . 2. Always wipe lenses in a single d irection. Warning: Do not wipe back and forwards ac ross the lens surfa ...

  • Barco R9001960 - page 19

    2. Installa tion G uidel ines Image 2-6 Image 2-7 Note, on ly import a nt if m ore than one pr ojector is i nstalled in t he room. The common a ddress can be zero (0) or one (1 ). The st andard RCU a re set up for common address z ero. T o change the common address of the RCU, contact a BARCO service center . If it is necessary to program the proje ...

  • Barco R9001960 - page 20

    2. Install ation Guid eline s 16 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 21

    3. Connectio ns 3. CONNECTIONS Overview • Power connection • Switching on • Switching to st an dby . • Switching of f • Input Source connec tion • Communication connections • Audio connections 3.1 Power connect ion AC Power cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power ...

  • Barco R9001960 - page 22

    3. Connectio ns Image 3-2 Lamp run time indication while running When the total run time of the lam p is 970 hou rs or more, the following warning message will be displayed. T he warning mess age will be repeated at the next start up.Press EXIT to remo ve the m e ssa ge . When the total run time of the lamp is 1000 hours or m ore, the following war ...

  • Barco R9001960 - page 23

    3. Connectio ns 3.3 Switching to standby . How to switch to standby? 1. Press ST ANDBY for 2 seconds until the mes sages Saving data please wait is displayed. (image 4-5) Note: Do not press any longer on the ST ANDBY k ey otherwise t he project or will restart. Image 3-4 When switching to standby , it is possible to restart within the f irst 5sec.. ...

  • Barco R9001960 - page 24

    3. Connectio ns Set up of the input selection 1. Press ENTER t o start up the adjustment mo de. 2. Press the cursor keys to select Installation . (menu 3-1) 3. Press ENTER t o display the Installation menu. 4. Press the cursor keys to select Input slots . (menu 3-2) 5. Press ENTER t o display the Inp ut S lots menu. 6. Pres s the cu rsor key s to s ...

  • Barco R9001960 - page 25

    3. Connectio ns Connect or nam e R G BHV Component Video - SS R-Y Y B-Y S - Component Video - SO Y R-Y Ys B-Y - - How to se lect sl ot 1 1. Press key 1 on t he RCU or the local keypad. Configuring the 5-cable input. The configuration has to be done on the Input Slot menu. T o change the signal format : 1. Press ADJUST or EN TER key to start up t he ...

  • Barco R9001960 - page 26

    3. Connectio ns 3.5.4 Computer inpu t/M onitor output How to connect the c omputer to the input? 1. Connect the output of the g raphical card of the com puter to the Computer input o f the projector Note: Only if the connection is < 60 cm. Otherwise insert an interface between the output of the computer and the input of the projector . 2. Connec ...

  • Barco R9001960 - page 27

    3. Connectio ns How to conn ect a Video source. 1. Connect the video output of your source to the video input of the projector (slot 3). 1 x BNC or cinch 1.0Vpp ± 3 dB. (image 3-6) Note: No loop through availabl e. Image 3-6 Video connection to proj ector How to se lect sl ot 3 1. Key in 3 on the RC U or the local keypad. 3.5.6 S-Video input What ...

  • Barco R9001960 - page 28

    3. Connectio ns How to connect a SDI source ? 1. Connect the out of your SDI s ource to the BNC S DI input of the projector . Note: The input is always 70 ohm terminated. 2. If loop t hrough is needed, use the SDO out put to connect to nex t device. Note: The output impedance of the SDO is 75 ohm . How to se lect sl ot 5 1. Key in 5 on the RC U or ...

  • Barco R9001960 - page 29

    3. Connectio ns 3.6.1 RS2 32 Application 1. Remote control : - easy adjustment of projector via an IBM P C (or com patible) or MAC connec tion. - all ow storage of m ultiple projector configurations and set ups. - wide range of c ontrol possibili ties. - address range fr om 0 to 255. 2. data communications : sending data to t he projector or copyi ...

  • Barco R9001960 - page 30

    3. Connectio ns A vailable mouse functions. Left click, right cli c k or double click are the sam e as for a traditional mouse. For Click and drag : push for 2 seconds on the left (right) mouse button, then move the mouse arrow with the mouse nav igator and click again very short on the left (r ight) mouse button to interrupt the drag funct ion. Ho ...

  • Barco R9001960 - page 31

    4. Getting S tarted 4. GETTI NG ST ARTED 4.1 RCU & Local ke ypad How controlling the projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the local k eypad ? The local keypad is l ocated on the backside of the projector . Remote control functions. This remote control includes a battery power ...

  • Barco R9001960 - page 32

    4. Gett ing Star ted Image 4-1 RCU functi on indica tion 1 Function keys user programmable keys with functions for direct access. 2 ADJ. A djust key , to enter the ad justment mode 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). P ress the recessed address key with a pencil, foll owed by pressing one digit but ...

  • Barco R9001960 - page 33

    4. Getting S tarted 14 TEXT when adjusting one of the image, e.g. c ontrols duri ng a meeting, the displayed bar scale can be removed by pressing ’TEXT’ key first. T o re-display the bar scale on the screen, press ’TEXT’ k ey again. 15 ENTER to start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode. 16 ...

  • Barco R9001960 - page 34

    4. Gett ing Star ted Image 4-3 Lamp run time indication while running When the total run time of the lam p is 970 hou rs or more, the following warning message will be displayed. T he warning mess age will be repeated at the next start up.Press EXIT to remo ve the m e ssa ge . When the total run time of the lamp is 1000 hours or m ore, the followin ...

  • Barco R9001960 - page 35

    4. Getting S tarted 4.3.2 Switching t o standby . How to switch to standby? 1. Press ST ANDBY for 2 seconds until the mes sages Saving data please wait is displayed. (image 4-5) Note: Do not press any longer on the ST ANDBY k ey otherwise t he project or will restart. Image 4-5 When switching to standby , it is possible to restart within the f irst ...

  • Barco R9001960 - page 36

    4. Gett ing Star ted How to change ? 1. Press ENTE R to start up the adjustment mode. (menu 4-1) 2. Push the cursor key ↑ or ↓ to highlight Installation . 3. Press ENTE R to select. (menu 4-2) 4. Push the cursor key ↑ or ↓ to highlight O SD color . 5. Press ENTER to sel ect. The O SD color menu will be disp layed. (menu 4-3) 6. Push the cur ...

  • Barco R9001960 - page 37

    4. Getting S tarted Hardwire d Remote Input 1. Plug one end of the remote cable in the connector on the bottom of the R CU. 2. Plug the other end i n the connector in t he front panel of the projector labelled RC . (image 4-7) Image 4-7 Wired RCU connection t o the projecto r Directly to one of the IR sensors of the projector . When using the wirel ...

  • Barco R9001960 - page 38

    4. Gett ing Star ted 4.6 Project or Address 4.6.1 Controlling t he projector Projector address Address installed in t h e projector to be indiv idually controlled. Common address Default address. Projector will always execut e the command comm ing from a RCU programmed with that common address. Why a projector a ddress ? As more than one projector ...

  • Barco R9001960 - page 39

    4. Getting S tarted How to Program an Address into the RCU? 1. Press the Address key ( recessed key on the RCU) with a pencil. 2. Enter the address with the digi t buttons within 5 seconds aft er pushing the address key . Note: That address can be any digit between 0 and 9. 4.7 Controlling the projector Input Selection Key in the corresponding slot ...

  • Barco R9001960 - page 40

    4. Gett ing Star ted T reble Tr eble control adjusts the treble level (high tones). Use the + button for more high tones. Use the - button for less hight tones. Balance Is only effective i f a external amplifier wit h loudspeakers is connected to the audio output . The balance control adjust the sound level bet w een the left and the right box. Use ...

  • Barco R9001960 - page 41

    5. Start U p mode 5. ST ART UP MODE What can be done? 1. During start up, t he projector can show first the identifi cation screen or a blank screen. 2. The projector can start up with auto power . The projector starts up in the same power conditi on as it was before power supply was interrupted. 5.1 Sta rt up with identi fication s creen How to se ...

  • Barco R9001960 - page 42

    5. Start Up mo de 38 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 43

    6. Au to Imag e Adju stment 6. AUTO IMAGE ADJUSTMENT 6.1 Start up Why auto image ? Auto image will center the image on the LCD panel when a file is loaded. How to start up ? Handle as follow to start up the auto image function : 1. Push the cursor key ↑ or ↓ t o highlight Auto Image . ( menu 6-1) 2. Press ENTER . The auto image menu will be dis ...

  • Barco R9001960 - page 44

    6. Auto Image Adjus tment 6.3 Act ion What can be done ? The action function can be t oggled between : • full aut omatic : the best fi tting file wil l be loaded automatically when a source i s selected. At the same time the image will be automatically centered on the active surface of t h e LCD. • on new file : only on a new file, the image wi ...

  • Barco R9001960 - page 45

    7. Random Acces s 7. RA NDOM ACCESS 7.1 overv iew flow Overview Image 7-1 Random Access Adjustm ent overview flowch art R5976182 BARCOREALITY 6500 30012001 41 ...

  • Barco R9001960 - page 46

    7. Random A ccess Start u p 1. Push the cursor key ↑ or ↓ to highlight Random Access . (menu 7-1) 2. Press ENTER . ADJUSTMENT MODE Select a path from below : AUTO IMAGE RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 7-1 7.2 P ic tu re S erv ic es 7.2.1 File annotation How a f ...

  • Barco R9001960 - page 47

    7. Random Acces s Possible file Manipula tions The following f ile manipulations are possible : • Load : installation of a file f or a new source. • Edit : editing a loaded fi le to the sour ce specs. • Rename : renaming a file. • Copy : copying a file. • Delete : deleting a file • Options : way of sorting the files. 7.2.3 Star t up of ...

  • Barco R9001960 - page 48

    7. Random A ccess Changing the filter setting 1. Push the cursor key ↑ or ↓ highlight filter list . 2. Press ENTE R to toggle the annotation between brackets. [All] : all files that can be loaded will be displayed. [Fit] : only the best f itting files will be di s played (with a disti nction of ± 2 lines and l ine duration of ± 300 ns, if not ...

  • Barco R9001960 - page 49

    7. Random Acces s 7.2.5.1. Start u p How to start up the Edit menu ? T o s tart up the EDIT menu : 1. Push the cursor key ↑ or ↓ to highlight Edit . (menu 7-7) 2. Press ENTER to sel ect. The Edit file adaptation menu will be displayed. (menu 7-8) 3. Select the file which m ust be edited (mo stly the active file). 4. Press ENTER . The file nam e ...

  • Barco R9001960 - page 50

    7. Random A ccess Do not adjust these settings on an acti ve file, they are used to i dentify the input source file. How to find the c orrect values for the item in the Edit file menu? Horizontal T otal P ixels If the value for "Horizontal T otal Pixels" is wrong, sampling m istakes (small vertical bars i n the projected image) will be se ...

  • Barco R9001960 - page 51

    7. Random Acces s Image 7-2 Example for Cl amp posit ion [trai ling] Field polarity The field polarity function is used for int er laced images. Both r asters of the image could be shifted in a wrong way (double lines are vis ible in the i mage). This can be corrected by for cing the field polarity to [neg] or [pos]. Use the ENTER key to toggle bet ...

  • Barco R9001960 - page 52

    7. Random A ccess 7.2.6 Rename Start Up T o change the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Rename . (menu 7-11) 2. Press ENTER . The Rename s election menu will be displayed. (menu 7-12) 3. Push the cursor key ↑ or ↓ to s elect a file name. 4. Press ENTER to sel ect. The Rename file menu will be disp layed w ...

  • Barco R9001960 - page 53

    7. Random Acces s 7.2.7 Copy Start Up T o copy the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Copy . 2. Press ENTER . The Copy se lection menu will be displayed. (menu 7-15) 3. Push the cursor key ↑ or ↓ to s elect a file name. 4. Press ENTER to sel ect. The Copy file menu will be displayed with t he selected fil e ...

  • Barco R9001960 - page 54

    7. Random A ccess 7.2.8 Dele te Start up a nd de lete T o delet e a selected file out of the list of files : 1. Push the cursor key ↑ or ↓ to highlight Delete . (menu 7-18) 2. Press ENTER . The delete selection menu will be displayed. (m enu 7-19) 3. Push the cursor key ↑ or ↓ to s elect a file name. 4. Press ENTER to sel ect. If [all] is s ...

  • Barco R9001960 - page 55

    7. Random Acces s 7.3.1 Star t up Start u p T o improve the image quality , the items in the Picture Tuning menu c an be toggled or adjusted. T o start up the Picture T uning : 1. Push the cursor key ↑ or ↓ to highlight Picture T uning . (menu 7-23) 2. Press ENTER to sel ect. The picture tuning menu will be displayed. (menu 7-24) RANDOM ACCESS ...

  • Barco R9001960 - page 56

    7. Random A ccess Start Up 1. Push th e cursor key ↑ or ↓ to highlight Color T emperature . (m enu 7-26) 2. Press ENTER to sel ect. The color temperature selecti on menu will be displayed. (m enu 7-27) PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with ↑ or ↓ then < ...

  • Barco R9001960 - page 57

    7. Random Acces s What can be done ? The possibility is offered to decode t he NT SC video signals via the default American IRE standard or via the European EB U standard. Decoding a NTSC signal using the European EB U standard may result in a greenish tint. How to change the decoding s etting ? 1. Push the cursor key ↑ or ↓ t o highlight De co ...

  • Barco R9001960 - page 58

    7. Random A ccess Changing the noise reduction va lue. 1. Push the c ursor key ↑ or ↓ to highlight Noise Reduction . (menu 7-3 1) 2. Press ENTER to sel ect. 3. Change the value by pushing the cursor key ← or → unti l th e desired noise level is reached. 4. Press EXIT to retur n the Picture T uning m enu. PICTURE TUNING CTI [ON] COLOR TEMPER ...

  • Barco R9001960 - page 59

    7. Random Acces s White bala nce adjustme nt 1. Is the input balance menu already activated ? If yes, go to step 4 If no, go to s tep 2 2. Push the cursor key ↑ or ↓ t o highlight Input Balance (menu 7-34) 3. Press ENTER to sel ect. The Input Balance menu will be displayed. (menu 7-35) 4. Push the cursor key ↑ or ↓ to highlight Black Balanc ...

  • Barco R9001960 - page 60

    7. Random A ccess 7.4.3 Mute Purpos e T o stop the sound reproduction. How to stop sound reproduc tion ? 1. Push t he cursor k ey ↑ or ↓ to highlight Mute . (menu 7-38) 2. Press ENTER t o toggle between [on] or [off] . AUDIO TUNING VOLUME BALANCE BASS TREBLE MUTE [OFF] FADE MODE [STEREO] VIDEO - AUDIO LOCK 123456 [A] [B] [C] [D] [E] [F] Select ...

  • Barco R9001960 - page 61

    7. Random Acces s How to set up the sound mode? 1. Push t he cursor k ey ↑ or ↓ to highlight Mode . (menu 7-40) 2. Press ENTER to toggle between [ster eo] or [mono]. AUDIO TUNING VOLUME BALANCE BASS TREBLE MUTE [OFF] FADE MODE [STEREO] VIDEO - AUDIO LOCK 123456 [A] [B] [C] [D] [E] [F] Select with ↑ or ↓ then <ENTER> <EXIT> to re ...

  • Barco R9001960 - page 62

    7. Random A ccess 7.5.2 Geomet ry start up Start u p 1. Push the cursor key ↑ or ↓ t o highlight Geom etry . (menu 7-42) 2. Press ENTER to sel ect. The geometry menu will be dis played. (menu 7-43) RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING AUDIO TUNING GEOMETRY IEEE 1394 Select with ↑ or ↓ then <ENTER> <EXIT> to ...

  • Barco R9001960 - page 63

    7. Random Acces s Size adjustmen t 1. Push the cursor key ↑ or ↓ to highlight Size . (menu 7-45) 2. Press ENTER to sel ect. 3. Push the cursor key ↑ or ↓ t o size the image in a vert ical direction. Push th e cursor key ← or → to size the im age in a ho rizontal direction. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [5:4] OP ...

  • Barco R9001960 - page 64

    7. Random A ccess Adjusting the blanking. 1. Push the cursor key ↑ or ↓ to highlight Blanking . (menu 7 -47) 2. Press ENTE R to display the blanking menu. (menu 7-48) 3. Push the cursor key ↑ or ↓ to highlight the desired blanking. 4. Press ENTER t o start up t he chosen blanking. 5. Use the cursor keys to a djust the blanking. GEOMETRY SHI ...

  • Barco R9001960 - page 65

    7. Random Acces s Set up of the geometry options. 1. Push the cursor key ↑ or ↓ to highlight Opti ons . (m enu 7-50) 2. Press ENTER to display the Geom etry options menu. (menu 7-51) 3. Press ENTER t o toggle between [Y es] or [No]. 4. Press EXIT to return to the Geometry menu. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [5:4] OPTIO ...

  • Barco R9001960 - page 66

    7. Random A ccess 7.6.2.1. Start u p Start u p 1. Push the cursor key ↑ or ↓ to highlight IEEE 1394 CONTROL . (menu 7 -54) 2. Press ENTER to sel ect. The IEEE 1394 Co ntrol menu will be displ ayed. (menu 7- 55) IEEE 1394 IEEE 1394 Control CAMCORDER CONTROL Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 7 -54 IEEE 1394 CO ...

  • Barco R9001960 - page 67

    7. Random Acces s 7.6.3 Camc order C ontrol Purpos e T o c ontrol your camcorder via the projec tor remote control. A valilable functions. The following function are av ailable : •p l a y • play fast forward • play slow forward • play fast reverse • play slow reverse • stop pause rewind fast forward • pause •r e w i n d •f a s t f ...

  • Barco R9001960 - page 68

    7. Random A ccess 64 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 69

    8. Installa tion m ode 8. INST ALLA TION MO DE Overview • Build-up • Start up installation mode • Input slots • No Signal • Lens adjustment • T ex t Box Position • Quick Ac cess Ke ys • Start Up mode • Network Configurat ion • 800 peripheral • Configuration •O S D C o l o r • Internal Patt erns • Switching Mode • Shutt ...

  • Barco R9001960 - page 70

    8. Installati on mode T o view or the c hange the input configuration. 1. Push the cursor key ↑ or ↓ t o highlight Input Slots . (menu 8-4) 2. Press ENTER to sel ect. The input slots menu will be displayed. (menu 8-5) INSTALLATION INPUT SLOTS NO SIGNAL LENS TEXT BOX POSITION QUICK ACCESS KEYS START UP MODE NETWORK CONFIGURATION more ... Select ...

  • Barco R9001960 - page 71

    8. Installa tion m ode 8.4.1 Changing the background color How to change ? 1. Push the cursor key ↑ or ↓ to higlight No signal . (menu 8-6) 2. Press ENTER to sel ect. The no signal menu wil l be display ed. (menu 8-7) 3. Push the cursor key ↑ or ↓ to highlight Color .menu 8-7 4. Press ENTER t o toggle between [blue] or [black]. INSTALLATION ...

  • Barco R9001960 - page 72

    8. Installati on mode How to change ? T o set up the shutdown time, handle as follow: 1. Push the cursor key ↑ or ↓ t o highlight No Signal . (me nu 8-10) 2. Press ENTER to sel ect. The no signal menu w ill be displayed. (menu 8-11) 3. Push the cursor key ↑ or ↓ t o highlight Shutdow n Time .menu 8-11 4. Push the cursor key ↑ or ↓ to ch ...

  • Barco R9001960 - page 73

    8. Installa tion m ode S h i f ta d j u s t m e n to ft h el e n s . 1. Push the cursor key ↑ or ↓ to higlight Lens . (menu 8-13) 2. Press ENTER to sel ect. The adjustment pattern will be displayed. With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source. 3. Push the cursor key ↑ or ↓ to sh ...

  • Barco R9001960 - page 74

    8. Installati on mode 8.7 Quick Ac cess Keys 8.7.1 Wh at are Qu ick Acces s Keys? What can be done w ith th ese keys ? The function keys on top of the RC U can be associated with an ad justment item in one of the adjustment me nus. Each item which is not password prot ected or does not have a k ey on the RCU can beassociat ed to a funct ion key . T ...

  • Barco R9001960 - page 75

    8. Installa tion m ode 8.8.1 Start u p with identifi cation scr een How to set up? 1. Push the cursor key ↑ or ↓ to highlight Start Up Mode . (menu 8-18) 2. Press ENTE R to display the start up mode me nu. (menu 8-19) 3. Push the cursor key ↑ or ↓ to highlight Identification . 4. Press ENTER t o toggle between [O N] or [OFF]. [ON ] projecto ...

  • Barco R9001960 - page 76

    8. Installati on mode Set up the network configuratio n T o set up the network configuration, follow the next procedure 1. Push the cursor key ↑ or ↓ to highlight Network Configur ation . (menu 8-22) 2. Press ENTER to display the network configuration menu. (menu 8-23) 3. Set DHCP on or off (contact your network responsible for the correct sett ...

  • Barco R9001960 - page 77

    8. Installa tion m ode Defining the output module T o define the output modul: 1. Push the cursor key ↑ or ↓ to highlight 800 Peripheral . (m enu 8-26) 2. Press ENTER to sel ect. 3. Push the cursor key ↑ or ↓ to highlight Output module . (men u 8-27) INSTALLATION 800 PERIPHERALS CONFIGURATION OSD COLOR INTERNAL PATTERNS SWITCHING MODE : [BL ...

  • Barco R9001960 - page 78

    8. Installati on mode Set up the Correct Configuration 1. Push the cursor key ↑ or ↓ t o highlight Configuration . (menu 8-30) 2. Press ENTER to sel ect. The configuration menu will be di s played. INSTALLATION 800 PERIPHERALS CONFIGURATION OSD COLOR INTERNAL PATTERNS SWITCHING MODE : [BLANKING] SHUTTER more ... Select with ↑ or ↓ then < ...

  • Barco R9001960 - page 79

    8. Installa tion m ode A vai lable pa ttern s - Outline -H a t c h - Color bars - Multiburst - Checker board - Page Char - Alpha numeric c har - Character s ets - Backgrounds How to sel ect an intern al pat tern s? 1. Push the c ursor key ↑ or ↓ to highlight Internal Patterns . (menu 8-33) 2. Press ENTER to sel ect. The internal patterns menu w ...

  • Barco R9001960 - page 80

    8. Installati on mode 8.15 Shutt er What should be done? When a shutter i s installed in t he projector , the presence of it should be indicated in the shutter menu before this s hutter can work. How to activate the sh utter? T o anno unce the present of a shutter , handle as follow : 1. Push the cursor key ↑ or ↓ to highlight Shutter . (menu 8 ...

  • Barco R9001960 - page 81

    9. Servic e mode 9. SERVICE MODE 9.1 Build-up Build-up The service menu is build-up in two part s which are connected together with the ’more’ i tem. If the desired item is not in the li s t of the displayed menu, select ’more’ with the c ursor key and push ENTER to display the other items in the service menu. 9.2 Start up Start u p 1. Push ...

  • Barco R9001960 - page 82

    9. Serv ice mo de Start Up 1. Push the cursor key ↑ or ↓ to highl ight Identification . (menu 9-4) 2. Press ENTE R to display the Identifi c ation screen. (menu 9-5) SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY LAMP DIMMING MORE... Select with ↑ or ↓ t ...

  • Barco R9001960 - page 83

    9. Servic e mode 9.5 Change Language Start u p 1. Push the cursor key ↑ or ↓ to higlight Chang e Language . (menu 9-8) 2. Press ENTER to display the Change La nguage menu. (menu 9-9) 3. Push the cursor key ↑ or ↓ to highlight t he desired language. 4. Press ENTER to change the language. Available languages: English SERVICE IDENTIFICATION CH ...

  • Barco R9001960 - page 84

    9. Serv ice mo de 9.6.2 Pro jector A ddress How to change the projector address? 1. Push the c ursor key ↑ or ↓ to higlight Projector Address . (menu 9-12) 2. Press ENTER to sel ect. The actual address is f illed in. The f irst digit is highlighted. CHANGE PROJ. ADDRESS Projector address : 1 Common address (RC5) : 0 Common address (PPM) : 0 Sel ...

  • Barco R9001960 - page 85

    9. Servic e mode 9.7 Change Baudrate PC Start Up 1. Push the cursor key ↑ or ↓ to highlight Change Baudrate PC . (m enu 9-14) 2. Press ENTER to display the Change Baudrate PC menu. (menu 9-15) The actual baudrate will be highli ghe d. The following baud rates ar e available : 230400/115200/57600/38400/19200/9600/4800/1200 3. Push the cursor key ...

  • Barco R9001960 - page 86

    9. Serv ice mo de Start Up 1. Push the cursor key ↑ or ↓ to higlight Lamp Run Time History . (menu 9- 18) 2. Press ENTER to dis play the Lamp Run Time overview . (m enu 9-19) A listing with the lamp serial number and the corresponding run time will be displayed. The actual installed lamp will be marked. 3. Press ENTE R to return to the serv ice ...

  • Barco R9001960 - page 87

    9. Servic e mode How to add the BARCO logo or to change the setting? 1. Push the cursor key ↑ or ↓ t o highlight BARCO logo . (m enu 9-21) 2. Press ENTER to sel ect. The BARCO logo men u will be displayed. ( menu 9-22) The actual settings will be displayed. Within this menu, three toggle settings and a shift control are available. SERVICE BARCO ...

  • Barco R9001960 - page 88

    9. Serv ice mo de 9.13 Unifor mity Changing these settings may seriously affect the performance of the projector . Start Up 1. Push the cursor key ↑ or ↓ t o highlight Uniformity . (menu 9-25) 2. Press ENTER to sel ect. The following warning wil l be displayed : (m enu 9-26) Uniformity is reserved to quali fied service personnel. If you are not ...

  • Barco R9001960 - page 89

    9. Servic e mode How to start u p the I2C diagnoses? 1. Push the cursor key ↑ or ↓ to highlight I2C Diagnoses . (menu 9-29) 2. Press ENTER to display the overview . (me nu 9-30) SERVICE BARCO LOGO PANEL ADJUSTMENTS UNIFORMITY RESET INPUT BALANCE I2C DIAGNOSIS Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 9 -29 I2C DIAGN ...

  • Barco R9001960 - page 90

    9. Serv ice mo de 86 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 91

    A. Stan dard Sour ce Set U p Files A. ST ANDARD S OURCE SET UP FILES A.1 T ab le ov ervie w Ta b l e o v e r v i e w The following standar d source files are pr e-programmed in the project or . Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Pto t 6 P act 7 Ltot 8 Lact 9 1600_48V 1600x600i 48,040 62,500 135,000 2160 1600 651 600 1600_60V 160 ...

  • Barco R9001960 - page 92

    A. Stan dard So urce Set Up Fil es Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Pto t 6 P act 7 Ltot 8 Lact 9 MAC_LC 640x480 66,619 34,975 31,338 896 640 525 480 MAC_POR 640x 870 74,996 68,846 57,280 932 640 918 870 MUSE 1172x518i 30,000 33,750 37,125 1172 1024 563 518 MXGA_60 1152x864 60,000 54,540 60,000 1456 1152 909 864 MXGA_70 1152x8 ...

  • Barco R9001960 - page 93

    A. Stan dard Sour ce Set U p Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Pto t 6 P act 7 Ltot 8 Lact 9 SVGA_60V 800x600 60,317 37,879 40,000 1056 800 628 600 SVGA_72V 800x600 72,084 48,080 50,003 1040 800 667 600 SVGA_75 800x600 75,000 46,875 75,000 1056 800 625 600 SVGA_85 800x600 85,000 53,635 56,250 1048 800 631 600 SVGA_100 800 ...

  • Barco R9001960 - page 94

    A. Stan dard So urce Set Up Fil es 90 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 95

    B. BARC O Contr ol Ma nager B. BARCO CONTROL MANAGER B.1 General requirements Functionality Controlling and monitori ng of the proj ector settings. Remo te diagnostics to detect potential errors. Computer requirement s A computer with standard web brower (Internet explor er , Netscape com municator , ...) con nected to a LAN (local area network) i ...

  • Barco R9001960 - page 96

    B. BARCO Co ntrol Man ager Image B-1 Start up screen Informat ion on the Star t Up page. The nick name of t he projector is shown i n the middle of the screen. E .g. default indic ated as ’Barco - projector’. Below the l ocation of the projector , default indicated as ’Location’. This nam e and location can be replaced by any other name or ...

  • Barco R9001960 - page 97

    B. BARC O Contr ol Ma nager Using the default window Image B-3 A Ti t le area, displays the title of the active window. B Menu bar with drop down menus. C Content pane, gives information or fill out boxes or slide bars for the active window . T o select an item, click on it i n the menu bar and select the desired item in the drop down menu. B.4 Con ...

  • Barco R9001960 - page 98

    B. BARCO Co ntrol Man ager B.4.1 Start up Start u p T o start up the control window : 1. Click on Control . A drop down menu wil l be displayed. (image B-4) Image B-4 Control sta rt up screen A vai lable items General Control Projector ’On’ or in ’Standby’ Pause on/off Freeze on/of f T ext on/off Source selecting the desired source Image se ...

  • Barco R9001960 - page 99

    B. BARC O Contr ol Ma nager Size Aspect R atio Keystone Correction Blanking Changing the blanking settings Audio V olume Bass T reble Balance Fad e Ta b l e B - 2 Overvi ew of possible adjustment s Securit y When selecting an item i n the control dr op down menu, the security login and pas sword will be askedimage B-5. Factory fitted user name and ...

  • Barco R9001960 - page 100

    B. BARCO Co ntrol Man ager How to select 1. Click on one of the buttons on the con tent pane. The indicated function can be swithed on or off. W hen the green light in the butt on lights up, the function i s on im age B-6. Image B-6 General c ontrol screen B.4. 3 Source How to select 1. Click on one of the buttons on the con tent pane. The indicate ...

  • Barco R9001960 - page 101

    B. BARC O Contr ol Ma nager B.4.4 Image Settings How to change The image sett ings as Contrast , Brightness, Color, Tint, Sharp ness, Phase and G amma can be changed by : 1. moving with the mouse the slide bar up or down Or , clicking on the up or dow n arrow on the edges of the slide bar . (image B-8) A value indication for the setting will be giv ...

  • Barco R9001960 - page 102

    B. BARCO Co ntrol Man ager B.4.5 Image Enhancement Changing noise reduction & dynamic color Noise reduction (reduc es noise and pixel ji t ter in all video and data sources) and dynamic color depth (increases color contrast for all video and data sources) can be changed by : 1. Moving with the mouse the slide bar up or down (image B-9) Or , Cli ...

  • Barco R9001960 - page 103

    B. BARC O Contr ol Ma nager Image B-10 Lens adjust ment Zoom click on ’+’ to z oom out click on ’-’ to zoom in Focus clic k on ’near ’ for a image which is focussed in front of the screen click on ’far’ for a image which is focussed behind the screen Lens shift click on the arrow up or down to shift the image in a vertical direction ...

  • Barco R9001960 - page 104

    B. BARCO Co ntrol Man ager Shift adjustment 1. Click and drag the yellow screen in the direction you want to shift the image (steps of 8 pixels). The black screen indicates its initial position. The shift values are given in a text box below the shifted image. Or , Click once with t he mouse on the shift screen and use t he cursor keys on the keybo ...

  • Barco R9001960 - page 105

    B. BARC O Contr ol Ma nager Image B-12 Blanking adj ustment How to adjust Blanking adjustment can be adjusted by : 1. Click on a side of the image and drag up/down or left/right until the desired blanking is reached (steps of 8 pixels). Or , Click on the arrows of the chosen side until t h e desired blanking i s obtained (every clic k is one pixel) ...

  • Barco R9001960 - page 106

    B. BARCO Co ntrol Man ager B.4.9 Audio Adjustment How to adjust The audio settings as V olume, B ass, Treble, Balance or Fade can be changed by : 1. moving with the mouse the slide bar up or down. (image B- 13) Or , clicking on the up or down arrow on the edges of the scroll bar . A value indication for the setting will be given just below the scro ...

  • Barco R9001960 - page 107

    B. BARC O Contr ol Ma nager B.5.1 Start up Start u p T o start up the configuration window : 1. Click on configuration. A drop down menu will be displayed. (image B-14) Image B-14 Configura tion start up screen A via lable items Mail set up to configure up to 3 mail addresses for auto feedback on a pr e-defined ti me. Security set up of access pass ...

  • Barco R9001960 - page 108

    B. BARCO Co ntrol Man ager Set up T o set up a mail configurat ion, handle a s follow : 1. Select one of the headings ’Mail 1’ , ’M ail 2’ or ’M ail 3’ . (image B-15) 2. Fill out the E-mail address with an existing E-mail address. 3. Select the content options by selecting t he appropiate options. The following options are available : - ...

  • Barco R9001960 - page 109

    B. BARC O Contr ol Ma nager Image B-16 Security set up Set up of the advanc ed user passw ord. Handle as follow : 1. Enter the new password. Only x’s will be d isplayed on the screen while typing in the new p assword. 2. Click on apply to acti vate the password. Changing the administrator password. Handle as follow : 1. Enter the old password. On ...

  • Barco R9001960 - page 110

    B. BARCO Co ntrol Man ager Set up T o set up the time and date, h andle as fol low : 1. Select the time zone by c licking on the corresponding t ime zone in the T ime zone list. (image B-17) 2. Select ’ network time ’ by checking the net work time box and fill out the IP-address of your l oc al NTP server . This server gives normally the GMT ti ...

  • Barco R9001960 - page 111

    B. BARC O Contr ol Ma nager Image B-18 Setting s screen SMTP Simple Mail T ransfert Protocol. A protocol us ed to move internet E -mail between systems. Projector name set up 1. Click in the projector nam e text field. 2. Fill out the projector nick name. Use the format : name@ domain 3. Click on apply to add the projector nam e to the general star ...

  • Barco R9001960 - page 112

    B. BARCO Co ntrol Man ager Image B-19 Source set up screen How to fill out T o enter a name, handle as foll o w: 1. Click in the corresponding text area. 2. Enter the name. 3. Repeat both steps for other slots. 4. When finished, click on ’ Apply ’ to activate these names. These names will become visible when selecting Control item Source. B.6 D ...

  • Barco R9001960 - page 113

    B. BARC O Contr ol Ma nager B.6.1 Start Up Start Up T o s tart up the control window: 1. Click on D iagnostics. A drop down menu will be displayed. (image B-20) Image B-20 Diagnost ics screen A vai lable items • General Status • Job Log • Advanced Diagnostics B.6.2 Gener al Status What is ava ilable The general stat us page gives an overview ...

  • Barco R9001960 - page 114

    B. BARCO Co ntrol Man ager Image B-21 Job log screen B.6.4 Advanced Diagnostics Overview The advanced diagnostics screen gives an overview of errors and warnings on motors, divic es, I²C busses, drivers, etc. Image B-22 Advanced di agnosti cs screen When the lights in the buttons are green, no errors and no warnings for this projector at the momen ...

  • Barco R9001960 - page 115

    C. So urce Nu mbers 81 — 86 and 91 — 96 C. SOURCE NUMBERS 8 1 — 86 AN D 91 — 96 C.1 Projector without any 800 peripheral connected Overview The source numbers 81 - 86 and 91 - 96 do n ot correspond to physical inputs. An add itional adjustment fil e can be created for these source numbers. This file can contain dif ferent settings. The rela ...

  • Barco R9001960 - page 116

    C. Source Num bers 81 — 86 and 91 — 96 source input 3 source input 3 source input 93 file C file C’ ... source input 6 source input 6 source input 96 file F file F’ Follow the same procedure as for a projector without a 800 peripheral connected. C.2.2 Source numbers 81 — 86 Overview Only valid if no input module is c onnected to slot 81 - ...

  • Barco R9001960 - page 117

    D. Cleanin g the Du stfilter D. CLEANING TH E DUSTFIL TER D.1 Cleaning When should it be done? Depending on the environement, t he dust filters s hould be cleaned at leas t when replacing the lamp. When the projector operates in dusty environement, clean the dust filters earlier t han when replacing the lamp. How to clean t he dust filter? T o c le ...

  • Barco R9001960 - page 118

    D. Cleani ng the D ustfilter 114 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 119

    Glossa ry GLOSSAR Y ANSI 73.11 American power plug to connect the power cord to t he w all outlet. CEE7 European power plug to connect the power c ord to the wall outlet . Common address Default address. Project or will always execute the command comming from a RCU programmed with that common address. CTI Color transient improvement Color trans ien ...

  • Barco R9001960 - page 120

    Glossa ry 116 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 121

    Index INDEX Numerics/ Symbols 800 peripheral 72–73 communication protocol 73 defining the output module RCVDS05 72 A Address 34 Program 34 RCU 34 Projector 34 Adjsutments 31 Quick Set up 31 Adjustment 31, 3 9 Auto image 39 Sta rt up 39 Quick Set up 31 Lens 31 Screen Color 31 adjustment mode 77 service mode 77 Adjustment mode 41 , 65 Installation ...

  • Barco R9001960 - page 122

    Index introduction 57 Geometry 57–60 Aspect Ratio 60 Blanking 59 Keystone 59 Opti ons 60 Shi ft 58 Size 5 8 Sta rt u p 58 Ge ttin g s tar ted 27 I I2C diagnoses 84 identificati on 77 IEEE 1394 61–63 Audiodecoding 62 Camcorder Control 63 Controls 61–62 Start up 61–62 Set up 62 input 24 IEEE 1394 24 Input 19 –20, 22–23 5-cable 20 Computer ...

  • Barco R9001960 - page 123

    Index Input Source connection 19 Installation Guidelines 9 Operating 29 Packaging 5 unpack 5 Standby 19, 31 Switch off 19, 31 Switch on 17, 29 projector address 79–80 change 79–80 Projectro address 80 common address 80 Q Q u i c kA c c e s sk e y s 7 0 Definition 70 R random access 57 geometry 57 introduction 57 Random Access 41–42 , 50, 55, ...

  • Barco R9001960 - page 124

    Index 120 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 125

    List o f tabl es LIST OF T ABLES B-2 Overview of possible adjustments .............................. ...................................... ............... 9 5 R5976182 BARCOREALITY 6500 30012001 121 ...

  • Barco R9001960 - page 126

    List of tabl es 122 R5976182 BARCOREA LITY 6500 30012001 ...

  • Barco R9001960 - page 127

    List of imag es LIST OF IMAGES 1 - 2 F r o n t v i e w d i m e n s i o n s p r o j e c t o r ................. .............................. ....................... ................ 6 1 - 3 S i d e v i e w d i m e n s i o n s p r o j e c t o r.......................... .............................. ...................... ......... 7 1 - 4 T o p v ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco R9001960 can be divided into several groups. They are, among others:
- Barco technical drawings
- R9001960 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco R9001960
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco R9001960.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco R9001960, service manual, brief instructions and user manuals Barco R9001960. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco R9001960.

Similar manuals

A complete manual for the device Barco R9001960, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco R9001960 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco R9001960.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco R9001960 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco R9001960, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco R9001960, that we can find in the current document
3. Tips how to use the basic functions of the device Barco R9001960 - which should help us in our first steps of using Barco R9001960
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco R9001960
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco R9001960 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco R9001960?

Use the form below

If you did not solve your problem by using a manual Barco R9001960, ask a question using the form below. If a user had a similar problem with Barco R9001960 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)