English dropdown-ico

Manual Siemens C79000-G8976-C156-07

300 pages 3.75 mb
Download

Go to site of 300

Summary
  • Siemens C79000-G8976-C156-07 - page 1

    Preface, Contents Advanced PC Configuration - Introduction 1 Getting Started Configured Mode 2 PG Operation 3 Additional Functions 4 Configuring the OPC Server 5 Using the CP 1616 as a PROFINET IO Controller/Device 6 Examples Industrial Ethernet 7 PROFIBUS-DP 8 Unspecified S7 Connection 9 SNMP 10 PROFINET 11 T ools Station Configuration Editor 12 N ...

  • Siemens C79000-G8976-C156-07 - page 2

    2 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Classification of the Safety-Related Notices This manual contains notices which you should observe to ensure your own personal safety , as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning tria ...

  • Siemens C79000-G8976-C156-07 - page 3

    3 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 T rademarks SIMA TIC R , SIMA TIC HMI R and SIMA TIC NET R are registered trademarks of SIEMENS AG. Third parties using for their own purposes any other names in this document which refer to trademarks might infringe upon the rights of the trademark owners ...

  • Siemens C79000-G8976-C156-07 - page 4

    4 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Prior to Startup Before putting the product into operation, note the following: Caution Before installing and starting the module, read the instructions in the corresponding documentation. For ordering data of the documentation, please refer to catalogs or ...

  • Siemens C79000-G8976-C156-07 - page 5

    5 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 This manual... ... supports you when commissioning your SIMA TIC NET PC modules in a PC station and helps you to use them successfully . ... introduces all the tools made available by the SIMA TIC NET software for solving your communication tasks. ... alon ...

  • Siemens C79000-G8976-C156-07 - page 6

    This manual... 6 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Among other things, this release includes the following new functions: S Using the CP 1616 as a PROFINET IO Controller/Device The manual now includes a detailed description of how the CP 1616 can be configured as a PROFINET IO controller and ...

  • Siemens C79000-G8976-C156-07 - page 7

    This manual... 7 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Symbols used in this manual This symbol appears in the margin to draw your attention to useful tips. This symbol highlights particularly relevant literature. Passages marked with this symbol indicate that there is useful information you shou ...

  • Siemens C79000-G8976-C156-07 - page 8

    Contents 8 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Contents This manual... 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens C79000-G8976-C156-07 - page 9

    Contents 9 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5.5.1 Significance in SIMA TIC NET 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.2 SNMP T raps 66 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the CP 1616 as ...

  • Siemens C79000-G8976-C156-07 - page 10

    Contents 10 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.5 Configuration Console 126 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Example — SNMP Communication with OPC 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 Hardware and Software Installa ...

  • Siemens C79000-G8976-C156-07 - page 11

    Contents 11 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.10 Adapting Mismatched Configurations 189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PC Station Wizard 190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Symbol File ...

  • Siemens C79000-G8976-C156-07 - page 12

    Contents 12 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.6 Create New V ariables 245 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.7 Adding and Monitoring V ariables 245 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.8 Customizing the Display ...

  • Siemens C79000-G8976-C156-07 - page 13

    1 Welcome to Advanced PC Configuration 13 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1 W elcome to Advanced PC Configuration 1.1 A New Concept for Y our Benefit Advanced PC Configuration is the new tool with which you can commission a PC station as part of an industrial communication network. SIMA TI ...

  • Siemens C79000-G8976-C156-07 - page 14

    1 Welcome to Advanced PC Configuration 14 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 LDB Databases no Longer Required By configuring on a central station and with the option of downloading, LDB databases are no longer required for the DP , FMS, and S7 protocols. Configuration and project engineering ...

  • Siemens C79000-G8976-C156-07 - page 15

    1 Welcome to Advanced PC Configuration 15 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1.2 PC Stations in SIMA TIC Use of PCs in Automation A “PC station” is a PC with communication modules and software components within an automation solution with SIMA TIC. The hardware configuration of a PC stati ...

  • Siemens C79000-G8976-C156-07 - page 16

    1 Welcome to Advanced PC Configuration 16 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Uniform Engineering Environment The PC station is handled just like a SIMA TIC S7 controller during project engineering with STEP 7 / NCM PC: Y ou connect the S7 stations and PC stations to the network in the network ...

  • Siemens C79000-G8976-C156-07 - page 17

    1 Welcome to Advanced PC Configuration 17 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Index for Every Component T o allow communication between the components in the PC station and to receive project engineering data, each component is assigned a unique identification number . The identification numbe ...

  • Siemens C79000-G8976-C156-07 - page 18

    1 Welcome to Advanced PC Configuration 18 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1.3 A Brief Introduction to T ools and Utilities Once you have installed the SIMA TIC NET software, you have the following tools available: Basic tools: Station Configuration Editor With this tool, you insert the mod ...

  • Siemens C79000-G8976-C156-07 - page 19

    1 Welcome to Advanced PC Configuration 19 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1.4 Guide to Installation and Commissioning Before you start commissioning, you should clarify the area of operation of your PC station and select the required mode for your communication module. The steps involved i ...

  • Siemens C79000-G8976-C156-07 - page 20

    1 Welcome to Advanced PC Configuration 20 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Mixed operation is possible. Since you can set the mode for individual communication modules, you can also use the PC station in mixed operation. Mixed operation, in this sense, means the use of several communication ...

  • Siemens C79000-G8976-C156-07 - page 21

    1 Welcome to Advanced PC Configuration 21 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1.4.2 Commissioning for PG Operation - Overview PG operation is the default mode for programming devices (PG/PC) and HMI stations. Step How does it work? T ool 1. Installing SIMA TIC NET software Install the SIMA TIC ...

  • Siemens C79000-G8976-C156-07 - page 22

    1 Welcome to Advanced PC Configuration 22 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1.4.3 Commissioning for Configured Mode - Overview When commissioning in the configured mode, three situations can be distinguished. The situation depends on whether or not project engineering data is already availab ...

  • Siemens C79000-G8976-C156-07 - page 23

    1 Welcome to Advanced PC Configuration 23 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 S Case b) Initial configuration with existing project engineering (XDB file) With this method, it is assumed that the PC station and its components and applications is first created in project engineering in STEP 7 / ...

  • Siemens C79000-G8976-C156-07 - page 24

    1 Welcome to Advanced PC Configuration 24 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 S Case c) Initial configuration without existing project engineering (XDB file) This is, for example, the situation when the commissioning personnel do not have an XDB file but the devices need to be installed in a p ...

  • Siemens C79000-G8976-C156-07 - page 25

    1 Welcome to Advanced PC Configuration 25 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Step T ool How does it work? S for “of fline mode”: Save project engineering data of the PC station in XDB. S HW Config / NetPro 7. Downloading the Project Engineering Data to the PC Station Depending on how the ...

  • Siemens C79000-G8976-C156-07 - page 26

    2 Getting Started “Configured Mode” 26 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 2 Getting Started “Configured Mode” The “configured mode” should be selected for productive communication between applications in the PC station and the programmable controllers, for example SIMA TIC S7-400. ...

  • Siemens C79000-G8976-C156-07 - page 27

    2 Getting Started “Configured Mode” 27 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 2.1 Steps in Creating Project Engineering Data T o create the project engineering data, you use the SIMA TIC NCM PC or SIMA TIC STEP 7 tool. Why do we need project engineering data? T o allow the device networked in ...

  • Siemens C79000-G8976-C156-07 - page 28

    2 Getting Started “Configured Mode” 28 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps below: Steps in Project Engineering 1. Start the SIMA TIC NCM PC from the Start menu. ( Start " SIMA TIC " SIMA TIC NCM PC ). As an alternative if “online local” : Use the PC Station W ...

  • Siemens C79000-G8976-C156-07 - page 29

    2 Getting Started “Configured Mode” 29 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Steps in Project Engineering 3. Change to NCM PC Config / HW Config and enter the intended modules and applications (take them from the catalog). (omitted if data entered by the PC Station Wizard) The software appli ...

  • Siemens C79000-G8976-C156-07 - page 30

    2 Getting Started “Configured Mode” 30 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Steps in Project Engineering 5. Save the configuration. (omitted if data entered by the PC Station Wizard) 6. Change to NetPro to network the station and to create the connections in the project engineering. ...

  • Siemens C79000-G8976-C156-07 - page 31

    2 Getting Started “Configured Mode” 31 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Steps in Project Engineering Note: Y ou can create the S7 station shown in the screenshot only with STEP 7/HW Config. In SIMA TIC NCM PC, you can open and edit a project containing S7 stations. Y ou can, however , o ...

  • Siemens C79000-G8976-C156-07 - page 32

    2 Getting Started “Configured Mode” 32 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Steps in Project Engineering 8. If the PC station is available online (local or remote), the next step is the initial configuration of the station. Note: T o load the project engineering data locally , you must set ...

  • Siemens C79000-G8976-C156-07 - page 33

    2 Getting Started “Configured Mode” 33 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Where to go from here - optional activities Once the project engineering configuration has been accepted, the PC station is operational. The following steps allowing the use of symbols, diagnostics, and calling the ...

  • Siemens C79000-G8976-C156-07 - page 34

    2 Getting Started “Configured Mode” 34 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 2.2 Steps for Initial Configuration For the initial configuration, use one of the following tools depending on the procedure: S Station Configuration Editor S STEP 7 / NCM PC Why do we need an initial configuration? ...

  • Siemens C79000-G8976-C156-07 - page 35

    2 Getting Started “Configured Mode” 35 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 2.2.1 Case a) Initial configuration using remote configuration with STEP 7 / NCM PC The target PC station that is available online is configured directly with STEP7 / NCM PC remote. The advantage of this is that the ...

  • Siemens C79000-G8976-C156-07 - page 36

    2 Getting Started “Configured Mode” 36 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Make the ”Initial Configuration with an XDB File” 3. Follow the instructions in the online help of the dialog to create and complete the remote configuration. Result: The PC station with its modules and a ...

  • Siemens C79000-G8976-C156-07 - page 37

    2 Getting Started “Configured Mode” 37 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 2.2.2 Case b) Initial configuration with XDB file In this case, you can import the XDB file with the project engineering data for the PC station directly . The advantage of this is that the project engineering data ...

  • Siemens C79000-G8976-C156-07 - page 38

    2 Getting Started “Configured Mode” 38 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Make the ”Initial Configuration with an XDB File” 3 If you want to prevent project engineering data from being transferred online at a later point in time, select the “W ork of fline...” option...”. ...

  • Siemens C79000-G8976-C156-07 - page 39

    2 Getting Started “Configured Mode” 39 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 2.2.3 Initial configuration without XDB file In this case, you specify the modules during initial configuration in the Station Configuration Editor . Y ou can transfer project engineering data to the PC station late ...

  • Siemens C79000-G8976-C156-07 - page 40

    2 Getting Started “Configured Mode” 40 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Make the Initial Configuration without an XDB File 4 In the properties dialog that opens, give the module an address. In some cases, you can also set further module parameters, for example bus parameters, (ma ...

  • Siemens C79000-G8976-C156-07 - page 41

    3 Getting Started “PG Operation” 41 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 3 Getting Started “PG Operation” This chapter shows you how you can configure your PC module in PG operation. In this situation, we distinguish two modes: S Programming device (PG/PC) S HMI stations The default set ...

  • Siemens C79000-G8976-C156-07 - page 42

    3 Getting Started “PG Operation” 42 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 3.1 Configuration for PG Operation - Programming Device (PG/PC) Y ou configure a module using the “Set PG/PC Interface“ tool. Follow the steps below: How to Configure for PG Operation 1. Y ou can start the configur ...

  • Siemens C79000-G8976-C156-07 - page 43

    3 Getting Started “PG Operation” 43 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Configure for PG Operation 3. Set the required communication parameters. With your module selected, you can click on “Properties” and then set the communication parameters. In normal situations, the paramete ...

  • Siemens C79000-G8976-C156-07 - page 44

    3 Getting Started “PG Operation” 44 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 3.2 Configuration for PG Operation - HMI Stations Y ou configure a module using the “Set PG/PC Interface” tool. Initially the procedure is identical to configuration for PG operation - programming device (PG/PC) as ...

  • Siemens C79000-G8976-C156-07 - page 45

    3 Getting Started “PG Operation” 45 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Configure for HMI Operation 2.1 Select the access point in the “Access Point of the Application” list box. The current assignment then appears at the bottom in the list box “Interface Parameter Assignment ...

  • Siemens C79000-G8976-C156-07 - page 46

    3 Getting Started “PG Operation” 46 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Configure for HMI Operation 2.3 Confirm your entries. As an alternative, you can also specify new access points in the “Configuration Console” tool. - > see “T ools” 2.4 In the “Interface Parameter ...

  • Siemens C79000-G8976-C156-07 - page 47

    3 Getting Started “PG Operation” 47 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Entries in the Client Program For communication without project engineering data as described here, all the data of the partner device relevant for communication must be known. Apart from the access point described abo ...

  • Siemens C79000-G8976-C156-07 - page 48

    3 Getting Started “PG Operation” 48 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 After adding the item and as long as the item is active, the connection can be used like a configured connection. This means that you can browse in the name space and also add further items without using the syntax of ...

  • Siemens C79000-G8976-C156-07 - page 49

    4 Using Additional Functions - Special Features to Note 49 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 4 Using Additional Functions - Special Features to Note 4.1 Checking the Configuration and Diagnostics The “Configuration Console” tool is a central tool for access to the components and data of ...

  • Siemens C79000-G8976-C156-07 - page 50

    4 Using Additional Functions - Special Features to Note 50 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 4.2.1 Detecting Errors in Communication with the OPC Scout Introduction The OPC Scout shows you the status of the communication connections. This can be done using the properties of process variables ...

  • Siemens C79000-G8976-C156-07 - page 51

    4 Using Additional Functions - Special Features to Note 51 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Errors when Adding V ariables S V ariable cannot be added Adding some or all variables is denied in the Navigator of the OPC Scout. Possible causes for this are as follows: - The variable name entere ...

  • Siemens C79000-G8976-C156-07 - page 52

    4 Using Additional Functions - Special Features to Note 52 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 4.3 Further Functions / Special Features 4.3.1 Adopting the Project Engineering and Symbols from PROFINET iMap and SIMOTION Scout Y ou can also use the symbols from PROFINET iMap and SIMOTION Scout w ...

  • Siemens C79000-G8976-C156-07 - page 53

    4 Using Additional Functions - Special Features to Note 53 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Y ou can check the selected module with the “Configuration Console” program using the “Access points” function: S fixed access point SIMOTION CP_SM_1: e.g. CP_SM_1: - > CP5613(PROFIBUS) S ...

  • Siemens C79000-G8976-C156-07 - page 54

    4 Using Additional Functions - Special Features to Note 54 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Step Description 1 Start the “Configuration Console” program (taskbar Start " Simatic " SIMA TIC NET " Configuration Console ). 2 In the navigation area, go to the branch SIMA TIC ...

  • Siemens C79000-G8976-C156-07 - page 55

    4 Using Additional Functions - Special Features to Note 55 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 4.3.3 Points to Note with SOFTNET Industrial Ethernet Modules Introduction Modules operated with the “SOFTNET Industrial Ethernet” software product are integrated in Windows just like a standard ...

  • Siemens C79000-G8976-C156-07 - page 56

    5 Project Engineering for the OPC Server 56 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5 Project Engineering for the OPC Server OPC Server With the SIMA TIC NET OPC Server described here, SIMA TIC NET offers you a convenient tool with which your PC applications can write and read process data and rec ...

  • Siemens C79000-G8976-C156-07 - page 57

    5 Project Engineering for the OPC Server 57 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5.1 Significance of Project Engineering The OPC Server Application T ype The OPC Server can be configured as an interface to all available communication protocols. Y ou can create this object only once in a PC stat ...

  • Siemens C79000-G8976-C156-07 - page 58

    5 Project Engineering for the OPC Server 58 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5.2 Specifying the Properties of the OPC Server in Project Engineering T o check the properties of the OPC Server or to modify parameters, open the Properties dialog of the OPC server object in STEP 7 / NCM PC. The ...

  • Siemens C79000-G8976-C156-07 - page 59

    5 Project Engineering for the OPC Server 59 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 T able 5-1 Paramete r / Function Possible Settings / Significance Can be set for a specific protocol / Function DP FDL FMS S7 ISO/TCP DP class 2 PROFInet PROFInet IO SNMP Scan cycle time Here, you make the settings ...

  • Siemens C79000-G8976-C156-07 - page 60

    5 Project Engineering for the OPC Server 60 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5.3 Specifying Connection Properties for the OPC Server in Project Engineering When using OPC, communication connections are established and managed by the OPC Server . As a result, you create the communication con ...

  • Siemens C79000-G8976-C156-07 - page 61

    5 Project Engineering for the OPC Server 61 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 FMS Connection Here, you assign a VFD to the FMS connection; you create VFDs in the properties dialog of the OPC Server . The Options button opens the dialog in which you will find the “OPC” tab. ...

  • Siemens C79000-G8976-C156-07 - page 62

    5 Project Engineering for the OPC Server 62 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 S7 Connection (S7 Communication) . ...

  • Siemens C79000-G8976-C156-07 - page 63

    5 Project Engineering for the OPC Server 63 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 ISO T ransport Connection (SEND/RECEIVE Interface) . ISO-on-TCP Connection (SEND/RECEIVE Interface) ...

  • Siemens C79000-G8976-C156-07 - page 64

    5 Project Engineering for the OPC Server 64 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5.4 Using Symbols for S7 Connections Symbol tables are created during project engineering with STEP 7 on a central engineering station in the form of STI files. Y ou can continue to use the symbol definitions made ...

  • Siemens C79000-G8976-C156-07 - page 65

    5 Project Engineering for the OPC Server 65 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 5.5 Configuring OPC Properties for SNMP in Project Engineering 5.5.1 Significance in SIMA TIC NET Y ou configure the OPC server an SNMP client in the “SNMP” tab by specifying the protocol properties for SNMP fo ...

  • Siemens C79000-G8976-C156-07 - page 66

    5 Project Engineering for the OPC Server 66 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Using the “Edit Plant Configuration” button, you obtain a list with all the devices registered with the OPC server . Y ou can add others to this list or edit the parameters of the entered devices. Device Profil ...

  • Siemens C79000-G8976-C156-07 - page 67

    5 Project Engineering for the OPC Server 67 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Parameter Meaning egpNeighborLoss The EGP neighbor (EGP = Exterior Gateway Protocol) of the device is not operational. The Exterior Gateway Protocol is used to exchange routing information between two neighboring g ...

  • Siemens C79000-G8976-C156-07 - page 68

    6 Using the CP 1616 as a PROFINET IO Controller/Device 68 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 6 Using the CP 1616 as a PROFINET IO Controller/Device Note As of STEP 7 V5.3 SP3, the CP 1616 is part of the hardware library . If you want to operate the CP 1616 with an earlier version of STEP 7, y ...

  • Siemens C79000-G8976-C156-07 - page 69

    6 Using the CP 1616 as a PROFINET IO Controller/Device 69 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 CP 1616 as IO Controller A PC communicates over Industrial Ethernet with PROFINET IO devices. The user program runs on the PC. The data traffic is handled over the CP 1616 with several SIMA TIC S7 PRO ...

  • Siemens C79000-G8976-C156-07 - page 70

    6 Using the CP 1616 as a PROFINET IO Controller/Device 70 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 CP 1616 as IO Device The IO - Base device user program runs on a PC with a CP 1616 installed in it. The data exchange with the controller is handled over the CP 1616 and Industrial Ethernet. Figure 1- ...

  • Siemens C79000-G8976-C156-07 - page 71

    6 Using the CP 1616 as a PROFINET IO Controller/Device 71 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 6.1 Initialize CP 1616 (IP address and device name) Assigning the IP address Follow the steps outlined below 1. Open the SIMA TIC Manager . 2. Select the menu command PLC " Ethernet " Assign ...

  • Siemens C79000-G8976-C156-07 - page 72

    6 Using the CP 1616 as a PROFINET IO Controller/Device 72 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 6.2 Configuring the CP 1616 Using the CP 1616 as a PROFINET IO Controller Follow the steps outlined below 1. Create a new project in the SIMA TIC Manager with the File " New menu command. 2. With ...

  • Siemens C79000-G8976-C156-07 - page 73

    6 Using the CP 1616 as a PROFINET IO Controller/Device 73 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below 10. Now configure the devices in the PROFINET IO system to meet your requirements. 11 . Once configuration is completed (for example, CP 1616 as PROFINET IO controller ...

  • Siemens C79000-G8976-C156-07 - page 74

    6 Using the CP 1616 as a PROFINET IO Controller/Device 74 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Using the CP 1616 as a PROFINET IO Device T o use the CP 1616 as PROFINET IO device, select (or create) a project containing a PROFINET IO controller , a PROFINET IO system and possibly also devices ( ...

  • Siemens C79000-G8976-C156-07 - page 75

    6 Using the CP 1616 as a PROFINET IO Controller/Device 75 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Using the CP 1616 as PROFINET IO Controller and Device Y ou can also use the CP 1616 as a controller and device at the same time. In other words, the same CP 1616 has the function of a controller and ...

  • Siemens C79000-G8976-C156-07 - page 76

    6 Using the CP 1616 as a PROFINET IO Controller/Device 76 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below 4. In the “PROFINET” tab, you can set the mode of the CP 1616. Select the options “PROFINET IO Controller” and “Enable PROFINET IO device operation”. Then c ...

  • Siemens C79000-G8976-C156-07 - page 77

    6 Using the CP 1616 as a PROFINET IO Controller/Device 77 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below 12. Disable the “Assign IP address via IO Controller” option. Based on the device name, the IP address of the CP 1616 is then assigned during compilation. 13. Once ...

  • Siemens C79000-G8976-C156-07 - page 78

    6 Using the CP 1616 as a PROFINET IO Controller/Device 78 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 6.4 installing the PROFINET IO Sample Program (Suse Linux 9.2) The “pniotest” sample program is restricted to the use of the CP1616 as controller . Follow the steps outlined below 1. Run the “ma ...

  • Siemens C79000-G8976-C156-07 - page 79

    7 Example — OPC Application for Industrial Ethernet 79 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7 Example — OPC Application for Industrial Ethernet 7.1 Overview Explanation of the Configuration Example This example illustrates how you can connect an S7-400 programmable controller with a PC stat ...

  • Siemens C79000-G8976-C156-07 - page 80

    7 Example — OPC Application for Industrial Ethernet 80 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Initial Situation If you want to try out the example yourself, you require the following: S a PC S a communication module for Industrial Ethernet (CP 1613) S the SIMA TIC NET CD 1 1/2003 software S an ...

  • Siemens C79000-G8976-C156-07 - page 81

    7 Example — OPC Application for Industrial Ethernet 81 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7.2 Hardware and Software Installation Installing the Software Activity 1. Turn on the PC and start Windows. 2. Insert the SIMA TIC NET 1 1/2003 CD. If the installation program does not start the CD au ...

  • Siemens C79000-G8976-C156-07 - page 82

    7 Example — OPC Application for Industrial Ethernet 82 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7.3 Creating the STEP 7 Project 7.3.1 STEP 7 Project Engineering on a Central Engineering Station In the requirements, we have already said that you require a STEP 7 project for this example. Below , y ...

  • Siemens C79000-G8976-C156-07 - page 83

    7 Example — OPC Application for Industrial Ethernet 83 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity In NetPro, you will find the network assignment of the SIMA TIC 400 station and the PC station displayed graphically . 7.3.2 Using Symbol Files Introduction Symbol tables are created during pr ...

  • Siemens C79000-G8976-C156-07 - page 84

    7 Example — OPC Application for Industrial Ethernet 84 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Specifying the Use of Symbol Files Activity 1. Select the “OPC server” in the “PC station” in “HW Config“ (or NetPro) and select “Object Properties” in the context menu. Result: The pro ...

  • Siemens C79000-G8976-C156-07 - page 85

    7 Example — OPC Application for Industrial Ethernet 85 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Click the “Select” button. Result: The “Use Symbols” dialog opens. In this dialog, you can specify which symbols you want to use and can configure them. Confirm the dialog with “O ...

  • Siemens C79000-G8976-C156-07 - page 86

    7 Example — OPC Application for Industrial Ethernet 86 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7.4 Configuring the PC Station Overview After starting the PC station, after installing the software and installing the CP 1613, the CP 1613 is in PG operation. Handling the Project Engineering Data De ...

  • Siemens C79000-G8976-C156-07 - page 87

    7 Example — OPC Application for Industrial Ethernet 87 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 1. Start the Station Configuration Editor by selecting it in the start menu ( Start " Station Configuration Editor ). ...

  • Siemens C79000-G8976-C156-07 - page 88

    7 Example — OPC Application for Industrial Ethernet 88 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 2. Click the “Import Station” button, select the XDB file that you want to import and confirm the dialog with “OK”. ...

  • Siemens C79000-G8976-C156-07 - page 89

    7 Example — OPC Application for Industrial Ethernet 89 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 3. Result: All the communication data created with S7 is now on the PC station. The CP 1613 is in the “configured mode”. PC configuration is complete. ...

  • Siemens C79000-G8976-C156-07 - page 90

    7 Example — OPC Application for Industrial Ethernet 90 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7.5 Using the OPC Scout 7.5.1 Establishing a Connection to the Server The OPC Scout as Client for Commissioning and T esting Y ou can now access the data objects of the S7 station with any OPC client. ...

  • Siemens C79000-G8976-C156-07 - page 91

    7 Example — OPC Application for Industrial Ethernet 91 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7.5.2 Inserting a Group and V ariables Organizing Process V ariables The process variables of the OPC server (known as OPC items) are assigned to groups. Y ou therefore require an OPC group before you ...

  • Siemens C79000-G8976-C156-07 - page 92

    7 Example — OPC Application for Industrial Ethernet 92 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. Select the following OPC items from the appropriate branches in the middle window and transfer these variables to the right-hand pane by clicking on the arrow button. Examples: SIMA TIC_400 ...

  • Siemens C79000-G8976-C156-07 - page 93

    7 Example — OPC Application for Industrial Ethernet 93 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 7.5.3 Displaying and Modifying V alues of V ariables Executing Synchronous Write Jobs Activity 1. The selected variables are displayed with the following additional information in the table of the main ...

  • Siemens C79000-G8976-C156-07 - page 94

    8 Example — OPC Application for PROFIBUS-DP 94 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8 Example — OPC Application for PROFIBUS-DP 8.1 Overview Explanation of the Configuration Example This example illustrates how to connect an ET 200 B DP slave with a CP 5613 in a PC station over PROFIBUS DP ...

  • Siemens C79000-G8976-C156-07 - page 95

    8 Example — OPC Application for PROFIBUS-DP 95 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Initial Situation If you want to try out the example yourself, you require the following: S a PC S the communication module for PROFIBUS (CP 5613) S The software of the SIMA TIC NET CD 1 1/2003 (NCM installed) ...

  • Siemens C79000-G8976-C156-07 - page 96

    8 Example — OPC Application for PROFIBUS-DP 96 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.2 Hardware and Software Installation Installing the Software Activity 1. Turn on the PC and start Windows. 2. Insert the SIMA TIC NET 1 1/2003 CD. If the installation program does not start the CD automatica ...

  • Siemens C79000-G8976-C156-07 - page 97

    8 Example — OPC Application for PROFIBUS-DP 97 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.3 Configuring the PC Station Overview After starting the PC station, after installing the software and installing the hardware, the CP 5613 is in PG operation. By adding the CP 5613 in the Station Configurat ...

  • Siemens C79000-G8976-C156-07 - page 98

    8 Example — OPC Application for PROFIBUS-DP 98 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 1. Start the Station Configuration Editor by selecting it in the start menu ( Start " Station Configuration Editor ). 2. Using the “Add” button, add the OPC s ...

  • Siemens C79000-G8976-C156-07 - page 99

    8 Example — OPC Application for PROFIBUS-DP 99 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 4. Check whether the settings of the module match the local configuration. 5. Confirm the configuration with “OK”. Result: The CP 5613 is in the “configured mode ...

  • Siemens C79000-G8976-C156-07 - page 100

    8 Example — OPC Application for PROFIBUS-DP 100 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.4 Changing the configuration on the PC station Below , you will see how to expand the hardware configuration of the local PC station by a DP master system and a DP slave using the PC Station Wizard. 8.4.1 C ...

  • Siemens C79000-G8976-C156-07 - page 101

    8 Example — OPC Application for PROFIBUS-DP 101 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. Select the project property you want to edit first. For DP project engineering, select the “Change hardware configuration (module properties, DP)” option: 5. Click the “Finish” button. Res ...

  • Siemens C79000-G8976-C156-07 - page 102

    8 Example — OPC Application for PROFIBUS-DP 102 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.4.2 Inserting a DP Master System CP 5613 as DP Master In the STEP 7 project, a SIMA TIC PC station was created as an image of the local PC. This PC station already includes the OPC server as the basic compo ...

  • Siemens C79000-G8976-C156-07 - page 103

    8 Example — OPC Application for PROFIBUS-DP 103 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.4.3 Inserting a DP Slave ET 200B as DP Slave In this section, you insert an ET 200B as DP slave and assign it to the DP master system. Activity 1. Open the catalog in the right pane of the application windo ...

  • Siemens C79000-G8976-C156-07 - page 104

    8 Example — OPC Application for PROFIBUS-DP 104 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Holding down the left mouse button, drag the DP slave to the DP master system until the mouse pointer touches the DP master system (shown as an alternating dark and light shaded line in the displa ...

  • Siemens C79000-G8976-C156-07 - page 105

    8 Example — OPC Application for PROFIBUS-DP 105 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.5 Using the OPC Scout 8.5.1 Establishing a Connection to the Server The OPC Scout as Client for Commissioning and T esting Y ou can now access the objects of the programmable controller with any OPC client. ...

  • Siemens C79000-G8976-C156-07 - page 106

    8 Example — OPC Application for PROFIBUS-DP 106 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 8.5.2 Inserting Groups and V ariables Organizing Process V ariables The process variables of the OPC server (known as OPC items) are assigned to groups. Y ou therefore require an OPC group before you can inse ...

  • Siemens C79000-G8976-C156-07 - page 107

    8 Example — OPC Application for PROFIBUS-DP 107 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. Select the following OPC items from the appropriate branches in the left-hand window and transfer these variables to the right-hand pane by clicking on the arrow button. The structure displayed an ...

  • Siemens C79000-G8976-C156-07 - page 108

    8 Example — OPC Application for PROFIBUS-DP 108 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. The selected variable has an array with two elements as the data type. Arrays are shown in braces, the elements are separated by a vertical bar . Enter {4|1} to set the output byte 0 to the value ...

  • Siemens C79000-G8976-C156-07 - page 109

    9 Example — Unspecified Connection from a PC Application 109 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9 Example — Unspecified Connection from a PC Application 9.1 Overview Explanation of the Configuration Example In this chapter you will learn how to configure and commission an S7 connection fr ...

  • Siemens C79000-G8976-C156-07 - page 110

    9 Example — Unspecified Connection from a PC Application 11 0 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.2 Installing the Software Installing the Software Activity 1. Turn on the PC and start Windows. 2 Insert the “SIMA TIC NET 1 1/2003” CD. If the installation program does not start the CD a ...

  • Siemens C79000-G8976-C156-07 - page 111

    9 Example — Unspecified Connection from a PC Application 111 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.3 Configuring the PC Station Overview After starting the PC station, installing the software, and installing the hardware, the PC module of the PC station is in PG operation. By adding the comm ...

  • Siemens C79000-G8976-C156-07 - page 112

    9 Example — Unspecified Connection from a PC Application 11 2 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 1. Start the Station Configuration Editor by selecting it in the start menu ( Start " Station Configuration Editor ). 2. Select the first line and ...

  • Siemens C79000-G8976-C156-07 - page 113

    9 Example — Unspecified Connection from a PC Application 11 3 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 3. Select the application in the “T ype:” field and the slot in the “Index:” field. The name of the application is the VFD name in your in your ...

  • Siemens C79000-G8976-C156-07 - page 114

    9 Example — Unspecified Connection from a PC Application 11 4 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 6. Check whether the settings of the module match the local configuration. Confirm the dialog with “OK”. 7. The application and the CP 1612 are inse ...

  • Siemens C79000-G8976-C156-07 - page 115

    9 Example — Unspecified Connection from a PC Application 11 5 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 ! Caution The IP addresses are read out automatically . Please note that when using DHCP , the IP addresses can change each time the computer restarts. These changes are not automatically update ...

  • Siemens C79000-G8976-C156-07 - page 116

    9 Example — Unspecified Connection from a PC Application 11 6 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.4 Creating, Editing and Downloading a STEP 7 Project Below , you will see how to create a new STEP 7 project with PC Station Wizard, add an S7 connection and download the project engineering d ...

  • Siemens C79000-G8976-C156-07 - page 117

    9 Example — Unspecified Connection from a PC Application 11 7 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2. Create a copy of this PC as a PC station in the STEP 7 project and assign the project name (here Sample_IE). With this point, the set information is entered automatically in your pro ...

  • Siemens C79000-G8976-C156-07 - page 118

    9 Example — Unspecified Connection from a PC Application 11 8 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.4.2 Edit the Network and Connection Project Engineering Data Activity 1. Select “Edit network and connection configuration”. Click on the “Finish” button to start NetPro. ...

  • Siemens C79000-G8976-C156-07 - page 119

    9 Example — Unspecified Connection from a PC Application 11 9 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2. When you close the PC Station Wizard, the following menu appears. (In NetPro, you can enter the VFD name of the application (for example VFD 20) by double-clicking on application and ...

  • Siemens C79000-G8976-C156-07 - page 120

    9 Example — Unspecified Connection from a PC Application 120 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Y ou can select the partner , however , only if it already exists in the project. In this example, you configure an unspecified connection. In the case of an S7 connection, no project ...

  • Siemens C79000-G8976-C156-07 - page 121

    9 Example — Unspecified Connection from a PC Application 121 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. When you have created a new connection, the following menu appears. Enter the address of the partner in the field indicated. Click the “Address Details” button to open the followi ...

  • Siemens C79000-G8976-C156-07 - page 122

    9 Example — Unspecified Connection from a PC Application 122 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 5. T o specify the access point of the partner application, enter the slot of the CPU in the SIMA TIC S7. If you have specified the slot, click on the “OK” button. The main menu appe ...

  • Siemens C79000-G8976-C156-07 - page 123

    9 Example — Unspecified Connection from a PC Application 123 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 7. Confirm with OK. Y ou might be informed of errors by the consistency check. 8. Y ou can only download the project when it is free of errors. If you receive a warning, this is only for ...

  • Siemens C79000-G8976-C156-07 - page 124

    9 Example — Unspecified Connection from a PC Application 124 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.4.3 Downloading the Project Engineering Configuration Activity 1. With “ PLC " Download to Current Project " Selected Stations ”, the project engineering data is loaded locally in ...

  • Siemens C79000-G8976-C156-07 - page 125

    9 Example — Unspecified Connection from a PC Application 125 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Open the Station Configuration Editor - the following configuration screen opens. The application and the CP 1612 are inserted in the Station Configuration Editor . Confirm the dialog ...

  • Siemens C79000-G8976-C156-07 - page 126

    9 Example — Unspecified Connection from a PC Application 126 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 9.5 Configuration Console The “Configuration Console“ makes all local settings and diagnostic functions possible. Y ou also have the settings or diagnostic results of the PC modules (for exam ...

  • Siemens C79000-G8976-C156-07 - page 127

    9 Example — Unspecified Connection from a PC Application 127 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Select your module under “Assigned interface parameter assignment“. Confirm with “OK”. 4. The setting is entered in the tools. When you now start your application, it function ...

  • Siemens C79000-G8976-C156-07 - page 128

    10 Example — SNMP Communication with OPC 128 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10 Example — SNMP Communication with OPC Introduction This section describes how you link network components and nodes with an SNMP agent to a PC station over an OPC SNMP server . Y ou will learn which tools t ...

  • Siemens C79000-G8976-C156-07 - page 129

    10 Example — SNMP Communication with OPC 129 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.1 Hardware and Software Installation Installing the Software Activity 1. Turn on the PC and start Windows. 2 Insert the SIMA TIC NET 1 1/2003 CD. If the installation program does not start the CD automaticall ...

  • Siemens C79000-G8976-C156-07 - page 130

    10 Example — SNMP Communication with OPC 130 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.2 Configuration of the SNMP OPC Server Activity 1. Start “SIMA TIC NCM PC Config” with Start " SIMA TIC " SIMA TIC NCM PC Manager and then double-click on the configuration icon. Double-click on ...

  • Siemens C79000-G8976-C156-07 - page 131

    10 Example — SNMP Communication with OPC 131 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2. Select the “SNMP” tab. Change the cycle time if necessary . The cycle time is the minimum time in which the variables of the OPC SNMP Server are polled. For more detailed information on the cycle ...

  • Siemens C79000-G8976-C156-07 - page 132

    10 Example — SNMP Communication with OPC 132 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.2.1 Editing the Plant Configuration Activity 1. In this case, no devices have been registered yet. Click on the “Add ...” button to make a new node known in the plant configuration of the OPC Server: ...

  • Siemens C79000-G8976-C156-07 - page 133

    10 Example — SNMP Communication with OPC 133 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2. Enter the necessary information for your device in the “Add Nodes” dialog box: S Enter a node name in the “Name” field. S Enter the IP address of the device. S Select a device profile. The de ...

  • Siemens C79000-G8976-C156-07 - page 134

    10 Example — SNMP Communication with OPC 134 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. The settings are then visible in the window of the plant configuration. With “Import Nodes”, all devices that have an IP address and exist in the current project are included automatically in the ...

  • Siemens C79000-G8976-C156-07 - page 135

    10 Example — SNMP Communication with OPC 135 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.3 Configuring the PC Station Overview After starting the PC station, installing the software, and installing the hardware, the PC module of the PC station is in PG operation. Handling the Project Engineering ...

  • Siemens C79000-G8976-C156-07 - page 136

    10 Example — SNMP Communication with OPC 136 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 1. Start the Station Configuration Editor by selecting it in the start menu ( Start " Station Configuration Editor ). 2. Click the “Import Station” button, sele ...

  • Siemens C79000-G8976-C156-07 - page 137

    10 Example — SNMP Communication with OPC 137 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 4. Confirm the configuration with “OK”. Result: All the communication data configured with S7 is now on the PC station. The communication module is in the “configu ...

  • Siemens C79000-G8976-C156-07 - page 138

    10 Example — SNMP Communication with OPC 138 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.4 Using the OPC Scout The OPC Scout as Client for Commissioning and T esting Y ou can now access the objects of the programmable controller with any OPC client. The OPC Scout is supplied with the SIMA TIC NET ...

  • Siemens C79000-G8976-C156-07 - page 139

    10 Example — SNMP Communication with OPC 139 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.4.2 Inserting a Group Organizing Process V ariables The process variables of the OPC server (known as OPC items) are assigned to groups. Y ou therefore require an OPC group before you can insert OPC variables ...

  • Siemens C79000-G8976-C156-07 - page 140

    10 Example — SNMP Communication with OPC 140 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 6. Now click on “OK” to insert all the items listed in the right part of the window in the group. 7. The right part of the main window includes the following additional information for the items of ...

  • Siemens C79000-G8976-C156-07 - page 141

    10 Example — SNMP Communication with OPC 141 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.4.3 Setting the T rap Recipient based on the Example of an OSM/ESM W riting V alues Y ou set the trap recipient of an OSM/ESM by assigning suitable values to two OPC items. The procedure described here is als ...

  • Siemens C79000-G8976-C156-07 - page 142

    10 Example — SNMP Communication with OPC 142 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Enter the IP address of the trap recipient and click the “OK” button: 5. Select the snT rapState1 entry and select the menu command “W rite value(s)” in the context-sensitive menu. The dialog ...

  • Siemens C79000-G8976-C156-07 - page 143

    10 Example — SNMP Communication with OPC 143 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 10.5 Creating a Device Profile with the MIB Compiler Device Profile A device profile contains the SNMP objects (OPC items) required for the SNMP interface of the OPC Server . It maps SNMP variables and SNMP trap ...

  • Siemens C79000-G8976-C156-07 - page 144

    10 Example — SNMP Communication with OPC 144 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2. Select the “SNMP” tab and click on the “Edit plant configuration ...” button: 3. A dialog box appears in which all the SNMP-compliant devices registered with the OPC Server are listed. Select ...

  • Siemens C79000-G8976-C156-07 - page 145

    10 Example — SNMP Communication with OPC 145 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. Click on the “Create Profile ...” button to open the dialog box of the MIB compiler: 5. The dialog box of the MIB compiler is in three areas: S Left area: MIB area for displaying the MIB objects ...

  • Siemens C79000-G8976-C156-07 - page 146

    10 Example — SNMP Communication with OPC 146 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 6. Select the MIB objects for the profile in the structure tree on the left and drag them to the profile area of the dialog box. Y ou can also select a node and drag it to the right-hand area. In this c ...

  • Siemens C79000-G8976-C156-07 - page 147

    1 1 Example — PROFINET Communication with OPC 147 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1 1 Example — PROFINET Communication with OPC Introduction This example illustrates how to link an S7-300 programmable controller with a PC station over a PROFINET communications processor . Y ou will see ...

  • Siemens C79000-G8976-C156-07 - page 148

    1 1 Example — PROFINET Communication with OPC 148 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1 1.1 Hardware and Software Installation Installing the Network Adapter Activity 1. Shut down the PC and turn it off. 2. Disconnect the power cable. 3. Read the instructions for installing cards in the manu ...

  • Siemens C79000-G8976-C156-07 - page 149

    1 1 Example — PROFINET Communication with OPC 149 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1 1.2 Configuring the PC Station Overview After starting the PC station, installing the software, and installing the hardware, the PC module of the PC station is in PG operation. By adding the communication ...

  • Siemens C79000-G8976-C156-07 - page 150

    1 1 Example — PROFINET Communication with OPC 150 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Procedure for “Initial Configuration” 1. Start the Station Configuration Editor by selecting it in the start menu ( Start " Station Configuration Editor ). 2. Click the “Import Station” button, ...

  • Siemens C79000-G8976-C156-07 - page 151

    1 1 Example — PROFINET Communication with OPC 151 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 1 1.3 Using Symbol Files Specifying the Use of Symbol Files The PROFInet tool “SIMA TIC iMap” creates a symbol file for the OPC server . Read the documentation of SIMA TIC iMap for information on creati ...

  • Siemens C79000-G8976-C156-07 - page 152

    1 1 Example — PROFINET Communication with OPC 152 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3. Select the device parameter assignment “CP1613 (RFC1006)” as the PROFInet module and confirm the dialog: Confirm with “OK”. 4. The last dialog box of the Commissioning Wizard appears. Cl ...

  • Siemens C79000-G8976-C156-07 - page 153

    12 Station Configuration Editor T ool 153 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 12 Station Configuration Editor T ool With the Station Configuration Editor , you can access the component management of the Station Manager in the PC station. Y ou require the Station Configuration Editor for the in ...

  • Siemens C79000-G8976-C156-07 - page 154

    12 Station Configuration Editor T ool 154 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Area of Application / Use Cases S Initial configuration (commissioning) When a module is started up for the first time, it must be configured. This initial configuration is necessary for all newly installed modules. ...

  • Siemens C79000-G8976-C156-07 - page 155

    12 Station Configuration Editor T ool 155 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Displaying the mode Configuration list Note Y ou will find more information on the meaning of the display boxes and the buttons in the integrated help system. Assigning the station name Y ou can assign a name for the ...

  • Siemens C79000-G8976-C156-07 - page 156

    12 Station Configuration Editor T ool 156 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Creating new components Y ou can select the components installed on your PC station (applications, OPC Server , modules such as controllers) by clicking the “Add” button. The modules are detected automatically . ...

  • Siemens C79000-G8976-C156-07 - page 157

    12 Station Configuration Editor T ool 157 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Y ou can import an XDB file at any time regardless of the current mode (online or offline). Y ou can also specify (option) whether you want the “offline mode” to be set following the import. Setting the Online or ...

  • Siemens C79000-G8976-C156-07 - page 158

    12 Station Configuration Editor T ool 158 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Checks and diagnostics S Note on diagnostic entries The entry in the “Status” field in the configuration list constantly informs you whether or not the created component matches the actual hardware configuration ...

  • Siemens C79000-G8976-C156-07 - page 159

    12 Station Configuration Editor T ool 159 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Configuring Activation of W arnings When warnings are enabled, a new event in the diagnostic buffer causes a display in the station manager ICON in the system tray . Whether a warning is indicated depends on the set ...

  • Siemens C79000-G8976-C156-07 - page 160

    13 SIMA TIC NCM PC Project Engineering T ool 160 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13 SIMA TIC NCM PC Project Engineering T ool SIMA TIC NCM PC is the central tool for configuring the communications services for your PC station. After creating your configuration data with this tool, you then ...

  • Siemens C79000-G8976-C156-07 - page 161

    13 SIMA TIC NCM PC Project Engineering T ool 161 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Functions T o create the configuration and project engineering data of a PC station, use the following functions: S Creating and configuring components of the PC station S Setting communication properties of t ...

  • Siemens C79000-G8976-C156-07 - page 162

    13 SIMA TIC NCM PC Project Engineering T ool 162 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Notice Optional packages are not supported by SIMA TIC NCM PC. If you are editing a project that was created or edited in STEP 7, it may contain components from STEP 7 optional packages. If this is the case, y ...

  • Siemens C79000-G8976-C156-07 - page 163

    13 SIMA TIC NCM PC Project Engineering T ool 163 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.2 Relationship Bet ween SIMA TIC NCM PC and STEP 7 SIMA TIC NCM PC and STEP 7 are compatible with each other . S Y ou can open and edit projects that you created with SIMA TIC NCM PC at any time in STEP 7/S ...

  • Siemens C79000-G8976-C156-07 - page 164

    13 SIMA TIC NCM PC Project Engineering T ool 164 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 The following graphic illustrates the differences once more: S SIMA TIC PC station S Other station S SIMATIC S5 S PG/PC S SIMA TIC PC station S Other station S SIMATIC S5 S PG/PC S SIMA TIC 400 station S SIMA ...

  • Siemens C79000-G8976-C156-07 - page 165

    13 SIMA TIC NCM PC Project Engineering T ool 165 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.3 Creating a PC Station The PC Station in the STEP 7 Project The “SIMA TIC PC Station” is an object in a SIMA TIC STEP 7 project. A typical PC station for OPC operation consists of the following element ...

  • Siemens C79000-G8976-C156-07 - page 166

    13 SIMA TIC NCM PC Project Engineering T ool 166 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Creating and Managing Objects After starting SIMA TIC NCM PC, you either open an existing project or create a new one. Y ou use projects to manage your configurations consisting of all or part of the stations ...

  • Siemens C79000-G8976-C156-07 - page 167

    13 SIMA TIC NCM PC Project Engineering T ool 167 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Note When you start STEP 7, a wizard is opened that helps you to create a new project. In SIMA TIC NCM PC, this wizard is replaced by the PC Station Wizard. Depending on your initial situation, this wizard pro ...

  • Siemens C79000-G8976-C156-07 - page 168

    13 SIMA TIC NCM PC Project Engineering T ool 168 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.4 Configuring a PC Station with SIMA TIC NCM PC Config Creating an Image of the PC Configuration T o allow the configuration data sent by the configuration system to be assigned to a module or an applicatio ...

  • Siemens C79000-G8976-C156-07 - page 169

    13 SIMA TIC NCM PC Project Engineering T ool 169 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps below: Drag the components from the catalog to the list (the “virtual rack”) displayed in PC Config. Notice Please note the following if you are transferring data by downloading: Make sure ...

  • Siemens C79000-G8976-C156-07 - page 170

    13 SIMA TIC NCM PC Project Engineering T ool 170 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 PC Components in the Catalog For the SIMA TIC PC station, you can select the following components: S Application - Application (standard application) Y ou use standard interfaces to communicate with other appl ...

  • Siemens C79000-G8976-C156-07 - page 171

    13 SIMA TIC NCM PC Project Engineering T ool 171 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.5 Creating the DP Master System Read the information below if you want to use a PROFIBUS CP and configure a DP master system. Significance of the Configuration Data in a DP Master System The configuration d ...

  • Siemens C79000-G8976-C156-07 - page 172

    13 SIMA TIC NCM PC Project Engineering T ool 172 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps below: 4 Now go to the catalog and insert the DP slaves devices that will be addressed over the application. Drag the DP slave from the catalog onto the icon of the DP master system. ...

  • Siemens C79000-G8976-C156-07 - page 173

    13 SIMA TIC NCM PC Project Engineering T ool 173 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.6 Creating a PROFINET IO System The following information applies if you want to use an Ethernet CP as PROFINET IO controller in the PC station and want to configure a PROFINET IO system. Significance of th ...

  • Siemens C79000-G8976-C156-07 - page 174

    13 SIMA TIC NCM PC Project Engineering T ool 174 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps below: 4 Now go to the catalog and insert the IO devices that will be addressed over the application. Drag the IO device from the catalog onto the icon of the PROFINET IO system. PROFINET IO D ...

  • Siemens C79000-G8976-C156-07 - page 175

    13 SIMA TIC NCM PC Project Engineering T ool 175 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.7 Configuring Connections Meaning During operation, configured connections are established either implicitly or on request, depending on the parameter assignment. They are then available to the OPC Server o ...

  • Siemens C79000-G8976-C156-07 - page 176

    13 SIMA TIC NCM PC Project Engineering T ool 176 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Connections to S7 Stations When you configure systems that include PC stations and SIMA TIC S7 stations, the use of STEP 7 is generally advisable. Y ou can then edit and process every station type completely a ...

  • Siemens C79000-G8976-C156-07 - page 177

    13 SIMA TIC NCM PC Project Engineering T ool 177 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.8 Project Engineering for a PC Station as DP Slave This section explains how to create the project engineering for a PC station with the CP 561 1 as DP slave. T wo situations can be distinguished: S The DP ...

  • Siemens C79000-G8976-C156-07 - page 178

    13 SIMA TIC NCM PC Project Engineering T ool 178 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below: 6. Save and compile the configuration. In the next section, the PC station will be assigned to a DP master system, in the example also a PC station. Follow the steps below: Fol ...

  • Siemens C79000-G8976-C156-07 - page 179

    13 SIMA TIC NCM PC Project Engineering T ool 179 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below: 3. When you move the DP slave onto the master system, the following dialog appears: ...

  • Siemens C79000-G8976-C156-07 - page 180

    13 SIMA TIC NCM PC Project Engineering T ool 180 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below: 4. Click on the ”Connect” button and confirm with OK. This creates a link between the DP slave now connected to the master system and the PC station previously created in t ...

  • Siemens C79000-G8976-C156-07 - page 181

    13 SIMA TIC NCM PC Project Engineering T ool 181 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps below: Follow the steps outlined below: 1. T o create inputs and outputs in the project engineering, select universal modules under ”PC station as DP slave” in the catalog and insert them ...

  • Siemens C79000-G8976-C156-07 - page 182

    13 SIMA TIC NCM PC Project Engineering T ool 182 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Follow the steps outlined below: 3. Repeat these steps for all submodules. 4. Save and compile the configuration. 13.8.2 Configuration with a “Third - party” DP Master DP master system for configuring the ...

  • Siemens C79000-G8976-C156-07 - page 183

    13 SIMA TIC NCM PC Project Engineering T ool 183 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Examples / model The SIMA TIC.NETdpdemo_gsd folder contains two model GSD files for the SIMA TIC NET SOFTNET PB modules: S siem8076.gsd Use this model file if the DP slave will be operated with its own appli ...

  • Siemens C79000-G8976-C156-07 - page 184

    13 SIMA TIC NCM PC Project Engineering T ool 184 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.9 Downloading Project Engineering Data to the PC Station (after Initial Configuration) T o allow applications to exchange information over configured communication connections, the project engineering data ...

  • Siemens C79000-G8976-C156-07 - page 185

    13 SIMA TIC NCM PC Project Engineering T ool 185 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.9.1 Online Mode The online mode allows you to download the configuration data directly to a PC station attached to the network (MPI, PROFIBUS or Ethernet), or to load the data on the local PC station if you ...

  • Siemens C79000-G8976-C156-07 - page 186

    13 SIMA TIC NCM PC Project Engineering T ool 186 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 S Online mode - local (configuration station and PC station identical) Download This situation occurs when the configuration system is installed on the PC station (engineering station). In this case, the confi ...

  • Siemens C79000-G8976-C156-07 - page 187

    13 SIMA TIC NCM PC Project Engineering T ool 187 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Using the PC Station Wizard. In the situation described here, “online - local”, the use of the PC Station Wizard is also possible. If you have not yet created the project engineering data for the PC statio ...

  • Siemens C79000-G8976-C156-07 - page 188

    13 SIMA TIC NCM PC Project Engineering T ool 188 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Note T o make it possible to identify the PC station, the station name in the configuration must match the locally configured station name. If this is not the case, it is not possible to adopt the configuratio ...

  • Siemens C79000-G8976-C156-07 - page 189

    13 SIMA TIC NCM PC Project Engineering T ool 189 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 13.10 Adapting Mismatched Configurations The Station Configuration Editor displays assigned indexes If you cannot download configuration information to the PC station, this may be due to a mismatched configura ...

  • Siemens C79000-G8976-C156-07 - page 190

    14 PC Station Wizard 190 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 14 PC Station Wizard The PC Station Wizard supports you when creating projects in SIMA TIC NCM PC or STEP 7. It allows the automatic adoption of configuration on the local PC station. This helps you to make sure that your configurati ...

  • Siemens C79000-G8976-C156-07 - page 191

    14 PC Station Wizard 191 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 The PC Station Wizard supports you in the following situations: S Changing local settings If the SIMA TIC NCM PC configuration tool is installed on the destination PC station, the wizard can compare the configuration data with the pl ...

  • Siemens C79000-G8976-C156-07 - page 192

    15 Symbol File Configurator T oo 192 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 15 Symbol File Configurator T oo With the Symbol File Configurator , you can create symbol files that allow you the option of access to symbolic variables over the SIMA TIC NET OPC server . A symbol file is structured hie ...

  • Siemens C79000-G8976-C156-07 - page 193

    15 Symbol File Configurator T oo 193 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Start the Symbol File Configurator Y ou start the Symbol File Configurator from the Windows Start menu: Start " SIMA TIC " SIMA TIC NET " Settings " Symbol File Configurator Structure Content ar ...

  • Siemens C79000-G8976-C156-07 - page 194

    15 Symbol File Configurator T oo 194 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Parameter Meaning EU Lo Indicates the low limit of the range of values of the variable (Engineering Units Low). The information about a range of values is used for the “Percent Deadband” OPC functionality . EU Hi Indi ...

  • Siemens C79000-G8976-C156-07 - page 195

    15 Symbol File Configurator T oo 195 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 15.2 The Meaning of Symbols Definitions The terms listed below are important in conjunction with the Symbol File Configurator: T erm Meaning OPC ItemID The OPC ItemID is the identifier of a process variable used by the OP ...

  • Siemens C79000-G8976-C156-07 - page 196

    15 Symbol File Configurator T oo 196 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 When to Use Symbols? The use of symbolic names is not mandatory . One exception to this is communication over PROFInet or communication with a SIMOTION partner . Here only symbols are used. Y ou can either do without self ...

  • Siemens C79000-G8976-C156-07 - page 197

    15 Symbol File Configurator T oo 197 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 15.3 Menus of the Symbol File Configurator in Detail “File” Menu This menu contains standardized commands for working with the files (for example, “Open File”, “Save File” etc.). All symbol files have the exte ...

  • Siemens C79000-G8976-C156-07 - page 198

    15 Symbol File Configurator T oo 198 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 “Edit” Menu This menu contains commands with which you can edit folders and symbols. Here, you will find the essential functions of the tool. In the following sections, you will find a detailed description based on se ...

  • Siemens C79000-G8976-C156-07 - page 199

    15 Symbol File Configurator T oo 199 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 15.4 Managing Symbols 15.4.1 How to Insert a New Symbol Activity 1. Select a folder in the left-hand area of the program window . The program always creates new symbols below the selected folder . 2. Select “New Symbol? ...

  • Siemens C79000-G8976-C156-07 - page 200

    15 Symbol File Configurator T oo 200 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4. The variable appears in the Selected Items part of the window . Add a symbolic name here. Repeat steps 3 and 4 when necessary for other variables. 5. Close the “Add Items” dialog by clicking the “OK” b ...

  • Siemens C79000-G8976-C156-07 - page 201

    15 Symbol File Configurator T oo 201 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 15.4.3 How to Add a Name Space Prefix Activity 1. Select “ Add/Change Prefix ” in the “Edit” menu. The “Change Prefix” dialog appears. 2. Here, enter a name for the prefix or change an existing prefix name and ...

  • Siemens C79000-G8976-C156-07 - page 202

    15 Symbol File Configurator T oo 202 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 15.4.6 How to Export a Symbol File Activity 1. In the OPC Address Space dialog, select the context-sensitive menu “Export to CSV File” . A dialog appears in which you can save a file. 2. Select a folder and enter a fi ...

  • Siemens C79000-G8976-C156-07 - page 203

    16 Configuration Console T ool 203 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16 Configuration Console T ool The Configuration Console is a snap-in program embedded in the Microsoft Management Console (MMC) and provides a wide range of options for configuring PC hardware components and PC user progra ...

  • Siemens C79000-G8976-C156-07 - page 204

    16 Configuration Console T ool 204 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Structure In the Configuration Console, you navigate in basically the same way as in the Windows Explorer . Y ou navigate on the left-hand side. On the right-hand side, the input/output area, you will see the properties of ...

  • Siemens C79000-G8976-C156-07 - page 205

    16 Configuration Console T ool 205 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2 Support During Commissioning and Operation Overview The essential functions provided by the “Configuration Console” tool for commissioning and operation are as follows: S Configure and set the traces for OPC and pr ...

  • Siemens C79000-G8976-C156-07 - page 206

    16 Configuration Console T ool 206 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 If you want to trigger a restart on the module..... Activity 1 Open the “Modules” folder in the navigation area. Select the relevant module. Click on the “General” property object. ...

  • Siemens C79000-G8976-C156-07 - page 207

    16 Configuration Console T ool 207 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 Click the “Restart” button. If currently possible, the module is reset. The result of the restart is displayed in the text box. 16.2.2 Forcing the OPC Server to Close Down The OPC server for SIMA TIC NET is s ...

  • Siemens C79000-G8976-C156-07 - page 208

    16 Configuration Console T ool 208 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 If you want to close down the or restart OPC server ..... Activity 1 Open the “Applications” folder in the navigation area. Select “OPC Settings”. Click on the “Exit OPC Server” property object. 2 If you want to ...

  • Siemens C79000-G8976-C156-07 - page 209

    16 Configuration Console T ool 209 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.3 Activating Configured Protocols Step by Step By configuring a DP master system and connections, you specify which protocols will be used by the OPC Server . During the commissioning of a system, it is sometimes usefu ...

  • Siemens C79000-G8976-C156-07 - page 210

    16 Configuration Console T ool 210 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 As default, all protocols are activated. Deactivate the protocols you do not want the OPC Server to use. Activate the protocols that were specified in the configuration and that you want to use as of now . 3 “A ...

  • Siemens C79000-G8976-C156-07 - page 211

    16 Configuration Console T ool 21 1 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.4 Setting a Symbol File for OPC Note The following information relates to the “Configuration Console” program of the SIMA TIC NET software as of V ersion 6.1. If you want to use a symbol file for the OPC Server .. ...

  • Siemens C79000-G8976-C156-07 - page 212

    16 Configuration Console T ool 212 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 4 Additional Settings for PROFInet and SIMOTION. If you use a symbol file created by the engineering tools for PROFInet or SIMOTION, you must also select a module for the communication paths. Click on the “Advanc ...

  • Siemens C79000-G8976-C156-07 - page 213

    16 Configuration Console T ool 213 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.5 Setting T races A trace logs the internal sequences of the component. It allows you to check the functions, for example of a user program. Depending on the configuration, the actions of a software module are logged i ...

  • Siemens C79000-G8976-C156-07 - page 214

    16 Configuration Console T ool 214 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 The table lists the possible traces for the protocols and the OPC Servers in the input/output area. Click on a protocol or an OPC server , for example on “PROFIdrive” to open the OPC Server for PROFIdrive. 3 ...

  • Siemens C79000-G8976-C156-07 - page 215

    16 Configuration Console T ool 215 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 If you want to create traces of the protocol libraries..... Activity 1 Open the “Applications” folder in the navigation area. Open the “OPC settings” folder in the navigation area. Click on the “Protocol trace” ...

  • Siemens C79000-G8976-C156-07 - page 216

    16 Configuration Console T ool 216 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3 Double-click on a protocol, for example, on “S7” for the trace settings of SAPI S7. The corresponding Properties dialog box opens. 4 Activate the trace by setting the first option box to “Overwrite trace fi ...

  • Siemens C79000-G8976-C156-07 - page 217

    16 Configuration Console T ool 217 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.6 Language Setting As of the SIMA TIC NET CD 2005 (V6.3), it is now possible to change the language of the program user interface after installation. T o adopt the modified language setting it may be necessary to resta ...

  • Siemens C79000-G8976-C156-07 - page 218

    16 Configuration Console T ool 218 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.7 Automatic Startup of Applications and Services; Applications and services you set up on a PC station can be synchronized with the startup of the PC station. As soon as the PC station is operational, user applications ...

  • Siemens C79000-G8976-C156-07 - page 219

    16 Configuration Console T ool 219 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Step Activity 3. T o enter an application in the list, click the ”New” button at the top. The operating system then displays the file selection dialog. Here, you can select the application. After exiting the file select ...

  • Siemens C79000-G8976-C156-07 - page 220

    16 Configuration Console T ool 220 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Note for software developers: Applications can be synchronized with the startup and shutdown using global events. S Event ”SimaticNetPcStationUpEvent”: The global event ”SimaticNetPcStationUpEvent“ is in the ”sign ...

  • Siemens C79000-G8976-C156-07 - page 221

    16 Configuration Console T ool 221 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.8 Security Setting (Windows XP + SP2 only) With Service Pack 2 for Windows XP , Microsoft has improved operating system security . The default settings of the operating system do not allow any communication from applic ...

  • Siemens C79000-G8976-C156-07 - page 222

    16 Configuration Console T ool 222 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Step Activity Note: The ”Disable“ button cancels these settings. Y ou should also remember that this disable also affects other applications that use this access method. ...

  • Siemens C79000-G8976-C156-07 - page 223

    16 Configuration Console T ool 223 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.2.9 Configuration Examples Y ou can display examples of how specific use cases can be configured directly over the user interface. Follow the steps below to display the configuration examples ... Step Activity 1. Select ...

  • Siemens C79000-G8976-C156-07 - page 224

    16 Configuration Console T ool 224 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.3 Editing the Configuration Overview During configuration you can do the following: S Change the mode of the module and set the index S Set the Industrial Ethernet network parameters S Set the Industrial Ethernet station ...

  • Siemens C79000-G8976-C156-07 - page 225

    16 Configuration Console T ool 225 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 Select the mode you want to use for the module: S Configured mode The parameters for the module are set in the project engineering data. S PG Operation The parameters for the module are set in the “Set PG/PC In ...

  • Siemens C79000-G8976-C156-07 - page 226

    16 Configuration Console T ool 226 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.3.2 Displaying and Setting the Industrial Ethernet Network Parameters for a CP 1613 For the Industrial Ethernet module CP 1613, the current settings are displayed and can be modified for the following functions: S duplex ...

  • Siemens C79000-G8976-C156-07 - page 227

    16 Configuration Console T ool 227 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 If you want to display and set the Industrial Ethernet network parameters of the CP 1613 ..... Activity 1 Open the “Modules” folder in the navigation area. Select the “CP 1613” Ethernet module. Click on the “Netwo ...

  • Siemens C79000-G8976-C156-07 - page 228

    16 Configuration Console T ool 228 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.3.3 Setting the Industrial Ethernet Station Addresses Note The modules for SOFTNET Industrial Ethernet are managed by the Windows operating system. This means that the station addresses of these modules must be set with ...

  • Siemens C79000-G8976-C156-07 - page 229

    16 Configuration Console T ool 229 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 Depending on the mode set for the module, you can modify or only check the address parameters. S Configured mode The parameters are set in the project engineering and cannot be changed. S PG Operation The paramet ...

  • Siemens C79000-G8976-C156-07 - page 230

    16 Configuration Console T ool 230 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 If you want to assign an access point of an interface parameter assignment to a module..... Activity 1 Open the “Access points” folder in the navigation area. 2 Double-click on the access point you want to edit in the r ...

  • Siemens C79000-G8976-C156-07 - page 231

    16 Configuration Console T ool 231 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.3.5 Setting the PROFIBUS DP Slave T o be able to use the DP slave submodule of the CP 5614/CP 5614 FO/CP 5614 A2 with OPC, configure the submodule as described below . It is not possible to configure these settings in th ...

  • Siemens C79000-G8976-C156-07 - page 232

    16 Configuration Console T ool 232 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 3 Set the remaining properties of the DP slave module as follows: S Use DP slave module with OPC With this check box, you decide whether or not the DP slave module will be used for OPC. S Address The network addres ...

  • Siemens C79000-G8976-C156-07 - page 233

    16 Configuration Console T ool 233 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.4 Diagnostics with “Configuration Console” Overview In diagnostics with “Configuration Console”, you can, for example, do the following S Display the operability of the modules S Display the PROFIBUS network para ...

  • Siemens C79000-G8976-C156-07 - page 234

    16 Configuration Console T ool 234 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 The bus parameters and the version information of the module are queried and displayed here. By querying the module, the internal communication path is tested. The result of the operation is displayed. Click the ...

  • Siemens C79000-G8976-C156-07 - page 235

    16 Configuration Console T ool 235 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.4.2 Displaying the Industrial Ethernet Network Parameters for a CP 1613 For the Industrial Ethernet module CP 1613, the following current settings are displayed S duplex mode (half duplex, full duplex, automatic) S mediu ...

  • Siemens C79000-G8976-C156-07 - page 236

    16 Configuration Console T ool 236 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.4.3 Displaying PROFIBUS Network Nodes If the module is operational, a list with all the nodes on the bus is created after starting this function. If the module is currently communicating and the module supports the funct ...

  • Siemens C79000-G8976-C156-07 - page 237

    16 Configuration Console T ool 237 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 2 After the call, the bus nodes are queried and displayed. Four dif ferent symbols are used to indicate the operating mode of a station: S Empty box with gray background (the same background color as tabs): No part ...

  • Siemens C79000-G8976-C156-07 - page 238

    16 Configuration Console T ool 238 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.4.4 Displaying PROFIBUS Network Parameters Follow the steps outlined below ... Activity 1 Open the “Modules” folder in the navigation area. Select the relevant PROFIBUS module. Click on the “Address” property obj ...

  • Siemens C79000-G8976-C156-07 - page 239

    16 Configuration Console T ool 239 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 16.4.5 Displaying V ersion Information of Hardware and Firmware Follow the steps outlined below ... Activity 1 Open the “Modules” folder in the navigation area. Select the relevant module. Click on the “V ersion” pr ...

  • Siemens C79000-G8976-C156-07 - page 240

    17 OPC Scout 240 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17 OPC Scout With the OPC Scout, you can test an OPC application or commission the OPC server . The following description assumes that you are familiar with the terminology and mechanisms of OPC (OPC server and OPC client). Y ou will find ba ...

  • Siemens C79000-G8976-C156-07 - page 241

    17 OPC Scout 241 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 How to Start the OPC Scout Y ou start the OPC Scout from the Start menu of the Windows operating system: Programs " SIMA TIC NET " PROFIBUS " CP5613_5614 " OPC Scout (or in the part of the Start menu in your product) The ...

  • Siemens C79000-G8976-C156-07 - page 242

    17 OPC Scout 242 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.2 Connecting the OPC Scout to a Local Server Before you can work with the OPC Scout, you must connect the OPC Scout with a server . Activity 1. In the Server and Groups Navigator open the Server " Local Server(s) entry . 2. Select on ...

  • Siemens C79000-G8976-C156-07 - page 243

    17 OPC Scout 243 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.4 Create a Group Y ou must first create one or more groups in which you can then manage the items you want to monitor or control. Activity 1. Open the Group menu and select the Add Group menu command or click on [New Group] in the Navigat ...

  • Siemens C79000-G8976-C156-07 - page 244

    17 OPC Scout 244 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Activity 1. Select the required group for which you want to browse the process space of the server in the Servers and Groups Navigator of the OPC Scout. 2. Open the Item menu and select the Add Item(s) command. The OPC Navigator window opens ...

  • Siemens C79000-G8976-C156-07 - page 245

    17 OPC Scout 245 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.6 Create New V ariables Y ou can create new variables using the OPC Navigator window . Activity 1. In the left column of the OPC Navigator window , select the entry for which you want to create a new variable. All variables that have alre ...

  • Siemens C79000-G8976-C156-07 - page 246

    17 OPC Scout 246 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.8 Customizing the Display Y ou can decide what information is displayed for variables in the OPC Scout window . Activity 1. Open the View menu and click the Options menu command. The ”Options” window is displayed and the ”Columns to ...

  • Siemens C79000-G8976-C156-07 - page 247

    17 OPC Scout 247 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Meaning of the Columns Name Meaning OPC ItemIDs Unique name of the OPC item. V alue V alue of the variable displayed in the format set in the Format column. Format Representation For integers, you can select between the original format, hexa ...

  • Siemens C79000-G8976-C156-07 - page 248

    17 OPC Scout 248 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.10 Change V alues Using the OPC Scout you can modify the values of writable variables directly . Activity 1. Select the variable whose value you want to change in the variable display in the main window of the OPC Scout. Y ou can also sel ...

  • Siemens C79000-G8976-C156-07 - page 249

    17 OPC Scout 249 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 The menu command has the following function Print Item List to File Writes the currently displayed items and all values to a file. A file list box is displayed in which you can enter the file name. Print Project to File Writes information ab ...

  • Siemens C79000-G8976-C156-07 - page 250

    17 OPC Scout 250 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.1 1.4 Group Menu The Group menu contains the following commands: The menu command has the following function Add Group Adds a group. The Add Group window opens. Y ou enter the name and properties of the group in the window . Remove Group ...

  • Siemens C79000-G8976-C156-07 - page 251

    17 OPC Scout 251 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 17.1 1.6 ? Menu The ? menu contains the following commands: The menu command has the following function Change Language Changes the display language of the OPC Scout. About OPC Server Opens a dialog box with general information on the OPC Se ...

  • Siemens C79000-G8976-C156-07 - page 252

    18 DCOM Settings with the dcomcnfg System Program 252 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18 DCOM Settings with the dcomcnfg System Program 18.1 Characteristics, Functions and Activation T o allow a client to use a COM object on another computer , the properties of the COM object must be confi ...

  • Siemens C79000-G8976-C156-07 - page 253

    18 DCOM Settings with the dcomcnfg System Program 253 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 This opens the required properties dialog ...

  • Siemens C79000-G8976-C156-07 - page 254

    18 DCOM Settings with the dcomcnfg System Program 254 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 for example Windows 2000,... for example Windows XP The “General”, “Options” and “MSDTC” tabs only appear in Windows XP and are not discussed further in this section. The “Default Properties ...

  • Siemens C79000-G8976-C156-07 - page 255

    18 DCOM Settings with the dcomcnfg System Program 255 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Note In Windows XP + SP2, the “Default COM Security” tab has been renamed to ”COM Security”. Note If you lower the security settings, the system must be restarted to activate the changes. Notice T ...

  • Siemens C79000-G8976-C156-07 - page 256

    18 DCOM Settings with the dcomcnfg System Program 256 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Settings When operating in a domain, the default authentication level can by set to “Connect” and the Default Impersonation Level to “Identify” for security reasons. In this case the relevant acco ...

  • Siemens C79000-G8976-C156-07 - page 257

    18 DCOM Settings with the dcomcnfg System Program 257 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.3 ”Default Security” / ”Default COM Security” / ”COM Security” T a b Description of the Settings In this tab (Windows 2000 : ”Default Security” ; Windows XP : ”Default COM Security” ...

  • Siemens C79000-G8976-C156-07 - page 258

    18 DCOM Settings with the dcomcnfg System Program 258 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 T able 18-1 Default Permissions Meaning Access permissions The default access permissions for all COM objects specify which accounts are allowed to access the object; in other words, call the methods and ...

  • Siemens C79000-G8976-C156-07 - page 259

    18 DCOM Settings with the dcomcnfg System Program 259 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 New as of Windows XP + SP2: As of Service Pack 2 for Windows XP , you can also set the limit for applications that specify their own permissions. Communication over OPC requires the following security lim ...

  • Siemens C79000-G8976-C156-07 - page 260

    18 DCOM Settings with the dcomcnfg System Program 260 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.4 DCOM Configuration / “Applications” T ab Description of the Settings In Windows XP , first open the “DCOM Configuration” folder in “My Computer” to display all the COM objects available o ...

  • Siemens C79000-G8976-C156-07 - page 261

    18 DCOM Settings with the dcomcnfg System Program 261 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.5 “Default Protocols” T a b Description of the Settings In the “Default Protocols” tab, you specify the network protocols that are available for DCOM. Note The OPC server of SIMA TIC NET was te ...

  • Siemens C79000-G8976-C156-07 - page 262

    18 DCOM Settings with the dcomcnfg System Program 262 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.6 Configuration of the Server Computer Introduction On the PC station in which the OPC server is operated, you must set which accounts have the right to use the server . In addition to the special perm ...

  • Siemens C79000-G8976-C156-07 - page 263

    18 DCOM Settings with the dcomcnfg System Program 263 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.6.1 “General” T ab: Registering the OPC Server With the OPC server , the default setting assumes an open system and assumes that the user will adapt the settings when higher security is required. I ...

  • Siemens C79000-G8976-C156-07 - page 264

    18 DCOM Settings with the dcomcnfg System Program 264 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.6.2 “Location” T ab Description of the Settings The “Location” tab is used to specify the computer on which the server is started. Since the configuration of the computer with the OPC server is ...

  • Siemens C79000-G8976-C156-07 - page 265

    18 DCOM Settings with the dcomcnfg System Program 265 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.6.3 “Identity” T ab Description of the Settings The settings made in the “Identity” tab specify the account to be accessed to check the permissions of the user of the object. Here, various sett ...

  • Siemens C79000-G8976-C156-07 - page 266

    18 DCOM Settings with the dcomcnfg System Program 266 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 ...

  • Siemens C79000-G8976-C156-07 - page 267

    18 DCOM Settings with the dcomcnfg System Program 267 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.6.4 “Security” T ab Introduction Y ou specify the access permissions for the OPC server in the “Security” tab. For the three aspects relevant to COM objects, you can either use the default perm ...

  • Siemens C79000-G8976-C156-07 - page 268

    18 DCOM Settings with the dcomcnfg System Program 268 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Specifying the Standard Permissions The users that are allowed to use the OPC server must be entered in the default access permissions, launch permissions, and configuration permissions. Several users hav ...

  • Siemens C79000-G8976-C156-07 - page 269

    18 DCOM Settings with the dcomcnfg System Program 269 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 New as of Windows XP + SP2: As of Service Pack 2 for Windows XP , communication over OPC also requires the following permissions to be set up: S Local and remote launch for the ANONYMOUS LOGON in Launch P ...

  • Siemens C79000-G8976-C156-07 - page 270

    18 DCOM Settings with the dcomcnfg System Program 270 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Specifying Access Permissions Activity 1. After clicking the “Edit” button in the “Use custom access permissions” box, the following dialog box appears: 2. Add the account of the user under which ...

  • Siemens C79000-G8976-C156-07 - page 271

    18 DCOM Settings with the dcomcnfg System Program 271 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Specifying Launch Permissions Activity 1. After clicking the “Edit” button in the “Use custom launch permissions” box, the following dialog box appears: 2. Add the account of the user under which ...

  • Siemens C79000-G8976-C156-07 - page 272

    18 DCOM Settings with the dcomcnfg System Program 272 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Specifying Configuration Permissions Activity 1. After clicking the “Edit” button in the “Use custom configuration permissions” box, the following dialog box appears: 2. Add the account of the use ...

  • Siemens C79000-G8976-C156-07 - page 273

    18 DCOM Settings with the dcomcnfg System Program 273 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 18.7 Configuration of the Client Computer Overview When operating with DCOM, this situation is that the OPC server runs on a different computer from the OPC clients (applications). This is why no process ...

  • Siemens C79000-G8976-C156-07 - page 274

    18 DCOM Settings with the dcomcnfg System Program 274 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Registering the OPC server - follow the steps below: The location of the server must be specified in the “Location” tab. For DCOM operation, only the check box “Run application on the following comp ...

  • Siemens C79000-G8976-C156-07 - page 275

    18 DCOM Settings with the dcomcnfg System Program 275 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Registering the OPC Scout as Client The OPC Scout is an OPC client that you will find in DCOM as a registered object. If you display the properties of the OPC Scout application DCOM, “None” is display ...

  • Siemens C79000-G8976-C156-07 - page 276

    18 DCOM Settings with the dcomcnfg System Program 276 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 It is advisable to register other OPC clients as DCOM objects. The advantage of this is that you can configure the security settings as described here with DCOMCNFG without needing to modify system - wide ...

  • Siemens C79000-G8976-C156-07 - page 277

    A Notes for Users of Older V ersions 277 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 A Notes for Users of Older V ersions The following sections include detailed information on the differences between the new and previous PC products from SIMA TIC NET A.1 LDB and XDB Databases - Overview Consequences ...

  • Siemens C79000-G8976-C156-07 - page 278

    A Notes for Users of Older V ersions 278 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 A.2 Project Engineering up to SIMA TIC NET CD 05/2000 Description A project engineering configuration created with the tools of the SIMA TIC NET product CDs up to and including SIMA TIC NET CD 05/2000 will be called t ...

  • Siemens C79000-G8976-C156-07 - page 279

    A Notes for Users of Older V ersions 279 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Previous Project Engineering with LDB and XDB Databases Even when the entire communication of all modules for the S7 protocol was stored in the XDB database, separate LDB databases were required for DP and FMS. An opt ...

  • Siemens C79000-G8976-C156-07 - page 280

    A Notes for Users of Older V ersions 280 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 A.3 Continued Use of Previous Project Engineering Continued Use of Databases and Project Engineering T ools The following table shows an overview of the previous database types and the corresponding project engineerin ...

  • Siemens C79000-G8976-C156-07 - page 281

    A Notes for Users of Older V ersions 281 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 A.4 Industrial Ethernet - Effects on Older Product V ersions (SIMA TIC NET CD 05/2000 and earlier) Introduction This section describes what changes are necessary in Industrial Ethernet systems if you are already using ...

  • Siemens C79000-G8976-C156-07 - page 282

    A Notes for Users of Older V ersions 282 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 TF-1613 up to version 2.1 for Windows 2000 Pro or Windows NT 4.0 Situation: Application associations will continue to be configured as previously with the COML TF program. Support of this protocol by SIMA TIC NCM PC o ...

  • Siemens C79000-G8976-C156-07 - page 283

    A Notes for Users of Older V ersions 283 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 SOFTNET -S7 up to version 3.3 for Windows 2000 Pro, Windows NT 4.0 or Windows 98 Situation: Windows 98 is no longer supported. An S7 project engineering configuration created with the COML S7 program cannot be used. W ...

  • Siemens C79000-G8976-C156-07 - page 284

    A Notes for Users of Older V ersions 284 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 DP 5613 up to version 2.1 for Windows 2000 Pro or Windows NT 4.0 Situation: A DP project engineering configuration created with the COM PROFIBUS program cannot be used. What to do: A DP project engineering configurati ...

  • Siemens C79000-G8976-C156-07 - page 285

    A Notes for Users of Older V ersions 285 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 SOFTNET -DP up to version 5.3 for Windows 2000 Pro, Windows NT 4.0 or Windows 98 Situation: Windows 98 is no longer supported. A DP project engineering configuration created with the COM PROFIBUS program cannot be use ...

  • Siemens C79000-G8976-C156-07 - page 286

    A Notes for Users of Older V ersions 286 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 SOFTNET -S7 up to version 5.3 for Windows 2000 Pro, Windows NT 4.0 or Windows 98 Situation: Windows 98 is no longer supported. An S7 project engineering configuration created with the COML S7 program cannot be used. W ...

  • Siemens C79000-G8976-C156-07 - page 287

    B Description of the PROFINET Configuration File 287 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000 - G8976 - C156 - 07 B Description of the PROFINET Configuration File Configuration File When you install the PROFInet OPC Server for SIMA TIC NET , a configuration file is installed. For special adaptations, it may be necess ...

  • Siemens C79000-G8976-C156-07 - page 288

    B Description of the PROFINET Configuration File 288 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000 - G8976 - C156 - 07 The Cycle Time Parameter This parameter will be configured in the user interface as of SIMA TIC NET V6.1 with STEP 7/SIMA TIC NCM PC V5.2 and higher . Parameter Meaning Syntax [PROTOCOL] CycleT ime=100 Pu ...

  • Siemens C79000-G8976-C156-07 - page 289

    B Description of the PROFINET Configuration File 289 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000 - G8976 - C156 - 07 The AbortConnectionAfter Parameter This parameter is specified in section [<connectionname>]. The connection name contains the IP address from the iMap project engineering (network view) and the PRO ...

  • Siemens C79000-G8976-C156-07 - page 290

    B Description of the PROFINET Configuration File 290 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000 - G8976 - C156 - 07 The InitiateTimeout Parameter This parameter is specified in section [<connectionname>]. The connection name contains the IP address from the iMap project engineering (network view) and the PROFInet ...

  • Siemens C79000-G8976-C156-07 - page 291

    B Description of the PROFINET Configuration File 291 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000 - G8976 - C156 - 07 The Timeout Parameter This parameter is specified in section [<connectionname>]. The connection name contains the IP address from the iMap project engineering (network view) and the PROFInet device ...

  • Siemens C79000-G8976-C156-07 - page 292

    C References and Literature 292 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 C References and Literature SIMA TIC NET , manual Industrial Communication with PG/PC Part of - the manual package Industrial Communication with PG/PC - the SIMA TIC NET CD Siemens AG SIMA TIC NET , instructions Commissioning ...

  • Siemens C79000-G8976-C156-07 - page 293

    C References and Literature 293 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 Ethernet, IEEE 802.3 (ISO 8802 - 3) For installing and operating an Industrial Ethernet network SIMA TIC NET manual for T riaxial Networks for Industrial Ethernet Lokale Netze - Kommunikationsplattform der 90er Jahre Andreas Z ...

  • Siemens C79000-G8976-C156-07 - page 294

    C References and Literature 294 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 On using PROFINET IO and PROFINET CBA : PROFINET System Description System Manual Siemens AG On configuring and programming PROFINET IO: From PROFIBUS DP to PROFINET IO Programming Manual Siemens AG On programming PROFINET IO: ...

  • Siemens C79000-G8976-C156-07 - page 295

    D Glossary 295 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 D Glossary Access point The access point is a symbolic name with which the user program can access the assigned communication interface / module. Advanced PC Configuration (APC) As of the SIMA TIC NET PC/Windows CD 07/2001, a new standard for ...

  • Siemens C79000-G8976-C156-07 - page 296

    D Glossary 296 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 PC Station In this context, a PC station means a PC with communications modules and applications. The role of this PC might be, for example, to communicate with SIMA TIC S7 devices and perform process control tasks. The term “runtime station ...

  • Siemens C79000-G8976-C156-07 - page 297

    297 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 E Document History This chapter provides you with an overview of the previous releases of this manual and the functional additions. New in release 01 / 2005 (C79000 - G8976 - C156 - 06) Among other things, this release includes the following new function ...

  • Siemens C79000-G8976-C156-07 - page 298

    298 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 A Access points, 229 configuring, 53 Advanced PC Configuration, 13 SIMA TIC NCM PC, 18 supported modules, 13 C Characteristics, 13 Compatibility , SIMA TIC NCM PC and STEP 7, 163 Configuration DP master system, 171 PROFINET IO system, 173 Configuration C ...

  • Siemens C79000-G8976-C156-07 - page 299

    299 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 N NCM PC and STEP 7, 163 NetPro, 160 O Offline mode, 157, 187 Online mode, 157, 185 OPC Navigator , 243 OPC Scout, 18, 49, 240 OPC Server , 279 connection properties, 60 properties, 58 OPC server , 15 errors when connecting with, 50 project engineering, ...

  • Siemens C79000-G8976-C156-07 - page 300

    300 Commissioning PC Stations - Manual and Quick Start Release 5/2005 C79000- G8976 - C156 - 07 ...

Manufacturer Siemens Category Computer Hardware

Documents that we receive from a manufacturer of a Siemens C79000-G8976-C156-07 can be divided into several groups. They are, among others:
- Siemens technical drawings
- C79000-G8976-C156-07 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens C79000-G8976-C156-07
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens C79000-G8976-C156-07.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens C79000-G8976-C156-07, service manual, brief instructions and user manuals Siemens C79000-G8976-C156-07. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens C79000-G8976-C156-07.

Similar manuals

A complete manual for the device Siemens C79000-G8976-C156-07, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens C79000-G8976-C156-07 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens C79000-G8976-C156-07.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens C79000-G8976-C156-07 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens C79000-G8976-C156-07, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens C79000-G8976-C156-07, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens C79000-G8976-C156-07 - which should help us in our first steps of using Siemens C79000-G8976-C156-07
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens C79000-G8976-C156-07
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens C79000-G8976-C156-07 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens C79000-G8976-C156-07?

Use the form below

If you did not solve your problem by using a manual Siemens C79000-G8976-C156-07, ask a question using the form below. If a user had a similar problem with Siemens C79000-G8976-C156-07 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)