Manual Canon LV-8235 UST

84 pages 5.1 mb
Download

Go to site of 84

Summary
  • Canon LV-8235 UST - page 1

    MUL TIMEDIA PROJECT OR U s er ’ s M an ua l ...

  • Canon LV-8235 UST - page 2

    2 T rademarks • DLP is a registered trademark of T exas Instruments. BrilliantColor and DynamicBlack are trademarks of T exas Instruments. • HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing, LLC. • T rademark PJLink is a trademark applied for trademark rights in Japan, ...

  • Canon LV-8235 UST - page 3

    3 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use.  Note: • The On-Screen Menu and figures in this manual may differ slightly from the product. • The contents of this manual are subject to change without notice.  Large Screen in Limited Space Short ...

  • Canon LV-8235 UST - page 4

    4 T able of Contents Features and Design ................... 3 T able of Contents ...................... 4 T o the Owner .......................... 5 Safety Instructions ..................... 6 Air Circulation 9 Filter Maintenance 9 Moving the Projector 9 Installing the Projector in Proper Position 10 Compliance .......................... 1 1 Part ...

  • Canon LV-8235 UST - page 5

    5 T o the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICA TES THA T DANGEROUS VOL T AGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBOL INDICA TES THA T T ...

  • Canon LV-8235 UST - page 6

    6 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m ...

  • Canon LV-8235 UST - page 7

    7 Immediately turn the power off, unplug the projector , and contact your dealer under the following conditions, otherwise a fire or an electric shock may result. – If smoke comes out from it. – If it emits a strange odor , or makes a strange noise. – If lamp goes out with a loud bang. – If water or any other liquid gets into it. – If met ...

  • Canon LV-8235 UST - page 8

    8 – Remove the batteries when they have been exhausted or not in use for an extended period of time. – Be sure to replace both batteries at the same time. Do not mix batteries of different types. – Insert batteries correctly according to the “+” and “-“ markings. – If a fluid from a battery leaks and comes in contact with your skin, ...

  • Canon LV-8235 UST - page 9

    9 Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken. – Do not put any flammable o ...

  • Canon LV-8235 UST - page 10

    10 Install the projector properly . Improper installation may reduce the lamp life and cause fire hazard. Choose the running speed of cooling fans in the fan control setting according to the altitude in which the projector is being used (p.63). Failure to do so may affect the projector life. CAUTION CAUTION ON CEILING MOUNTING For ceiling mounting, ...

  • Canon LV-8235 UST - page 11

    11 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a g ...

  • Canon LV-8235 UST - page 12

    ⑤ 12 Part Names and Functions ① T op Controls and Indicators ② Infrared Remote Receiver ③ Lamp Cover (Lamp and Air Filter) ④ Adjustable feet ⑤ Speaker ⑥ Exhaust vent ⑦ Air Intake vent ⑧ Projection Window  Note: Do not touch the projection window , otherwise, the window may be soiled and the image can be smudgy . ⑨ Focus Lever ...

  • Canon LV-8235 UST - page 13

    13 ⑦ CONTROL PORT When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable. ⑧ 3D SYNC OUT Connect a 3D sync. signal cable for an IR wireless emitter to this jack (p.50) ⑨ LAN Connection T erminal Connect the LAN cable (refer to the user's manual of "Network Set-up and ...

  • Canon LV-8235 UST - page 14

    14 Part Names and Functions ① POWER indicator – Turn red when the projector is in the stand-by mode. – Turn green while the projector is under operation (pp.22, 76). – Blink green in the Power management mode (pp.59, 76) ② W ARNING TEMP . indicator Emit a red light when the projector detects abnor- mal condition. This also blinks red when ...

  • Canon LV-8235 UST - page 15

    15 Part Names and Functions  Note: T o ensure safe operation, please observe the following precautions: • Do not bend, drop, or expose the remote controller to moisture or heat. • For cleaning, use a soft dry cloth. Do not apply benzene, thinner , spray , or any chemical material. Remote Controller ② AUTO SET button Execute the setting of ...

  • Canon LV-8235 UST - page 16

    16 Part Names and Functions T o ensure safe operation, please observe the following precautions : ● Use two (2) AAA type batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery . ● A void contact with water or liquid. ● Do not expose the remote controller to moisture or heat. ● Do not drop the remot ...

  • Canon LV-8235 UST - page 17

    A B C E D 17 Positioning the Projector For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen. Installation  Note: • This projector is not equipped with an optical zoom. T o adjust the screen size, change the throw distance. • The brightness in the room has a great influence ...

  • Canon LV-8235 UST - page 18

    18 Installation Connecting to a Computer Cables used for connection • VGA cables (Mini D-sub 15 pin) * • Audio cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector .)  Note: • Input sound to the COMPUTER 1/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/COMPONENT IN terminal as input. ...

  • Canon LV-8235 UST - page 19

    19 Installation Connecting to V ideo Equipment Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector . ) External Audio Equipment Audio cable (stereo) VIDEO IN and AUDIO IN S-VIDEO IN S-video cable Video and audio cable Video and Audio Output S-video Output Audio ...

  • Canon LV-8235 UST - page 20

    20 Installation Connecting to Component V ideo Equipment Cables used for connection • Audio cables • Scart-VGA cable • Component cable • Component-VGA cable • HDMI cable (Cables are not supplied with this projector .) External Audio Equipment COMPUTER 1/ COMPONENT AUDIO IN Audio cable (stereo) Audio Input Component Video Output (Y , Pb/Cb ...

  • Canon LV-8235 UST - page 21

    21 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of power system. If yo ...

  • Canon LV-8235 UST - page 22

    22 The preparation display will disappear after 30 seconds. (See page 60 for Lamp mode status.) T urning On the Projector Connect the projector ’ s AC power cord into an AC outlet. The POWER indicator lights red. Press the POWER button on the remote controller or on the top control. The POWER indicator lights green and the cooling fans start to o ...

  • Canon LV-8235 UST - page 23

    23 What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector . A PIN code consists of a four-digit number . Refer to the PIN code lock function in the Setting Menu on pages 61-62 for locking operation of ...

  • Canon LV-8235 UST - page 24

    24 TO MAINT AIN THE LIFE OF THE LAMP , ONCE YOU TURN THE PROJECTOR ON, W AIT A T LEAST FIVE MINUTES BEFORE TURNING IT OFF . Power off? disappears after 4 seconds. T urning Off the Projector Press the POWER button on the remote controller or on the top control, and Power off? appears on the screen. Press the POWER button again to turn of f the proje ...

  • Canon LV-8235 UST - page 25

    25 How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Use the Point  buttons t ...

  • Canon LV-8235 UST - page 26

    26 For detailed functions of each menu, see “Menu T ree” on pages 74-75. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Main Menu Sub-Menu ⑨ ⑩ ① Input Used to select an input source from COMPUTER 1 , COMPUTER 2 , HDMI , VIDEO or S-VIDEO . (pp.32-33, 43-45) ② PC adjust Select Auto PC , Fine sync , T otal dots , Horizontal position , V ertical position ...

  • Canon LV-8235 UST - page 27

    27 Zoom and Image Position Adjustment Press the ZOOM +/- buttons on the top control to adjust the screen size. Screen size can be adjusted 84% to 100% from its maximum screen size. It is not available when On-Screen menu is displayed. Zoom adjustment can be memorized. (p.54) Focus Adjustment Adjust the lens focus with the focus lever . Focus Lever ...

  • Canon LV-8235 UST - page 28

    3D 3D 28 Basic Operation Auto setup function is provided to automatically execute the setting of Auto setup (includes Auto input and Auto PC functions) in the Setting Menu by just pressing the AUT O SET button on the remote controller . Refer to page 53 for the setting of the Auto setup function.  Note: Fine sync, T otal dots, Horizontal positio ...

  • Canon LV-8235 UST - page 29

    3D 29 Basic Operation Sound Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select Sound . Press the Point  or the OK button to access the submenu items. Press the VOLUME+/– buttons on the remote controller or on the top control to adjust the volume. The volume dialog box appears on the scree ...

  • Canon LV-8235 UST - page 30

    30 Basic Operation Remote Controller Operation Using the remote controller for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote controller to select t ...

  • Canon LV-8235 UST - page 31

    31 Basic Operation Press the BLANK button on the remote controller to black out the image. T o restore to normal, press the BLANK button again or press any other button. When the projected image is captured and is set as User in the Logo selection (p.55), the screen changes each time you press the BLANK button as follows. black out  the captured ...

  • Canon LV-8235 UST - page 32

    32 COMPUTER 1 3D Choose COMPUTER 1(ANALOG PC) by pressing the COMPUTER 1 button on the remote controller . Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 3 Input Source Selection (COMPUTER 1: ANALOG PC) Computer Input COMPUTER 1 button  Note: When the Auto input func ...

  • Canon LV-8235 UST - page 33

    33 3D Choose COMPUTER2 (ANALOG PC) by press the COMPUTER 2 button on the remote controller .  Note: When the Auto input function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.53). COMPUTER 2 button Remote Controller 1 2 Press the MENU button to display the On-Screen Menu. Press the Point ? ...

  • Canon LV-8235 UST - page 34

    34 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional ...

  • Canon LV-8235 UST - page 35

    35 Computer Input Auto PC adjustment function is provided to automatically adjust Fine sync , T otal dots , Horizontal position , V ertical position and Clamp position to conform to your computer . PC adjust Menu Auto PC adjustment T o store adjustment parameters The adjusted parameters from the Auto PC adjustment can be stored in the projector . O ...

  • Canon LV-8235 UST - page 36

    36 Computer Input PC adjust Menu Manual PC adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adj ...

  • Canon LV-8235 UST - page 37

    37 Computer Input T o store the adjusted data, select Store and then press the Point  or the OK button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the OK button. T o clear the stored data, select Mode free and then press the Point  or the OK button. Move the highlight to the Mode that you want to ...

  • Canon LV-8235 UST - page 38

    38 Computer Input 3D Image Select Menu IMAGE button Presentation High contrast User 1 User 2 User 3 Image Mode Selection User 4 Cinema Standard Remote Controller IMAGE button Select the desired image mode among Presentation , Standard , High contrast , Cinema , User 1 , User 2 , User 3 , and User 4 by pressing the IMAGE button on the remote control ...

  • Canon LV-8235 UST - page 39

    39 Computer Input Image adjust Menu Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select Image adjust and then press the Point  or the OK button. 1 2 Use the Point  buttons select the desired item and then press the OK button to display the adjustment dialog box. Use the Point  ...

  • Canon LV-8235 UST - page 40

    40 Computer Input Provide the image in its original size. When the original image size is larger than the panel resolution (DLP chip 1280 x 800 dots), the projector automatically switches to the panning mode. Use the Point  buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows dis ...

  • Canon LV-8235 UST - page 41

    41 Select Digital zoom + . The On-Screen Menu disappears and D. zoom + appears. Press the OK button to expand the image size. Use the Point  buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the r ...

  • Canon LV-8235 UST - page 42

    42 Computer Input Keystone This function is used to adjust keystone distortion of the projected image. Use the Point  buttons to choose the item you want to adjust. Keystone T o correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point  buttons to correct keystone distortion (p.28). Store T o store ...

  • Canon LV-8235 UST - page 43

    43 Choose VIDEO or S-VODEO by pressing the VIDEO button or the S-VIDEO button on the remote controller . 1 2 Input Menu Input Source Selection (VIDEO, S-VIDEO) V ideo Input When video input signal is connected to the VIDEO jack, select VIDEO. VIDEO When video input signal is connected to the S-VIDEO jack, select S-VIDEO. S-VIDEO  Note: When the ...

  • Canon LV-8235 UST - page 44

    44 Choose COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the the COMPONENT or COMPUTER 1 button on the remote controller; choose HDMI by pressing the HDMI button on the remote controller . Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 Use the Point  butt ...

  • Canon LV-8235 UST - page 45

    45 V ideo Input 3D Image Select Menu IMAGE button Presentation High contrast User 1 User 2 User 3 Image Mode Selection User 4 Cinema Standard Remote Controller IMAGE button Select the desired image mode among Presentation , Standard , High contrast , Cinema , User 1 , User 2 , User 3 , and User 4 by pressing the IMAGE button on the remote controlle ...

  • Canon LV-8235 UST - page 46

    46 V ideo Input Image Adjustment 1 2 Press the Point  button to decrease the contrast; press the Point  button to increase the contrast (from 0 to 63). Press the Point  button to decrease the brightness; press the Point  button to increase the brightness (from 0 to 63). Press the Point  button to lighten red tone; press the Point  ...

  • Canon LV-8235 UST - page 47

    47 V ideo Input Use the Point  buttons to adjust the gamma value to obtain a better balance of contrast ( Default , 1.8 , 2.0 , 2.2 , 2.4 , or 2.6 ). Press the Point  button to decrease the sharpness of the image; press the Point  button to increase the sharpness of the image (from 0 to 15). An interlaced video signal can be displayed i ...

  • Canon LV-8235 UST - page 48

    48 V ideo Input This projector has the picture screen resize function, which enables you to customize the image size. Screen Size Adjustment Aspect Menu 1 2 Adjust the screen scale and position manually with this function. Press the Point  button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ? ...

  • Canon LV-8235 UST - page 49

    49 V ideo Input Keystone This function is used to adjust keystone distortion of the projected image. Use the Point  buttons to choose the item you want to adjust. Keystone T o correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point  buttons to correct keystone distortion (p.28). Store T o store or ...

  • Canon LV-8235 UST - page 50

    50 3D Display For V iewing 3D Contents  Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Infrared Emitter 3D SYNC OUT Sync Signal Cable (Supplied with the IR Emitter) Stereoscopic Wireless LCD Glasses 3D SYNC Input When using DLP Link compatible glasses, follow these steps: 1. ...

  • Canon LV-8235 UST - page 51

    51 - The optimum 3D viewing distance from the screen is about 3 m or more and your eyes should be level with the screen. - Viewing 3D images for an extended period of time or viewing them from an oblique angle can cause eye strain. - T ake breaks when viewing 3D images for an extended period of time. As this may cause eye fatigue. - Some image sour ...

  • Canon LV-8235 UST - page 52

    52 The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Norwegian, Danish, Polish, Hungarian, Romanian, Russian, Brazilian Portuguese, T urkish, Arabic, Kazakh, Simplified Chinese, T raditional Chinese, Korean, Japanese and Thai. Setting Menu Setting Setting Press th ...

  • Canon LV-8235 UST - page 53

    53 Auto input This function detects the input signal automatically . When a signal is found, the search will stop. Use the Point  buttons to select one of the following options. Off ......... Auto input dose not work. On 1 ....... Auto input works under the following situation. – When pressing the AUTO SET button on the remote controller . ...

  • Canon LV-8235 UST - page 54

    54 This function is used to memorize the Zoom adjustment with the ZOOM +/- buttons on the top control (p.27). Press the Point  buttons to select Reset, Store1 or Store2. Reset ... Reset the Zoom adjustment when the projector is turned off or the AC power cord is unplugged. Store1 . . Store the Zoom setting even when the projector is turned of ...

  • Canon LV-8235 UST - page 55

    55 This function decides whether to display On-Screen Displays. On ........................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is this option. Countdown off ....... Show the input image instead of the countdown when turning on the pr ...

  • Canon LV-8235 UST - page 56

    56 Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the OK button. A confirmation box appears and select Y es to capture the projected image. After capturing the projected image, go to the Logo select function and set it to User . ...

  • Canon LV-8235 UST - page 57

    57 Enter a Logo PIN code Use the Point  buttons to enter a number . Press the Point  button to fix the number and move the red frame pointer to the next box. The number changes to  . If you fixed an incorrect number , use the Point  button to move the pointer to the number you want to correct, and then enter the correct number . Repe ...

  • Canon LV-8235 UST - page 58

    58 Setting This function is only used for HDMI input source. Image Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment. Sound HDMI .......... When using the HDMI cable, select HDMI . Both video and audio* are transferred and you need not to connect any additional cables for audio. * This HDMI terminal suppo ...

  • Canon LV-8235 UST - page 59

    59 Setting T imer left before Lamp is off . Power management mode For reducing power consumption as well as maintaining the lamp life, the Power management mode function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Standby .............. When the lamp has been fully cool ...

  • Canon LV-8235 UST - page 60

    60 Setting Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point  buttons to select Off , CC1 , CC2 , CC3 or CC4 . If the Closed caption is not clear , you can change the text from Co ...

  • Canon LV-8235 UST - page 61

    61 Setting This function allows you to use the Key lock and the PIN code lock function to set the security for the projector operation. Key lock Key lock PIN code lock This function locks the top control and remote controller buttons to prevent operation by unauthorized persons. Unlocked. Lock the operation of the top control.T o unlock, use the re ...

  • Canon LV-8235 UST - page 62

    62 Setting Use the Point  buttons to select Off , On 1 or On 2 . Press the OK button to close the dialog box. Change the PIN code lock setting Enter a PIN code Use the Point  buttons to enter a number . Press the Point  button to fix the number and move the red frame pointer to the next box. The number changes to  . If you fixed a ...

  • Canon LV-8235 UST - page 63

    63 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22). L 1 ..... Normal operation L 2 ..... Slower , lower-sound and longish-time than the normal operation ( L1 ). This function is used to display the cumulative lamp operating time and reset the lamp counter . When the total ...

  • Canon LV-8235 UST - page 64

    64 This function returns all setting values except for the User logo , PIN code lock , Logo PIN code lock , Lamp counter and Filter counter to the factory default settings. Factory default Setting This function is used to set a frequency for the filter replacement. Use the Point  buttons to select Filter counter and then press the Point  o ...

  • Canon LV-8235 UST - page 65

    65 Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector . The information menu changes each time you press the INFO. button on the remote controller as follows. page 1/2  page 2/2  hide  page 1/2  • • • • • While the informa ...

  • Canon LV-8235 UST - page 66

    66 The W ARNING TEMP . indicator shows the state of the function which protects the projector . Check the state of the W ARNING TEMP . indicator and the POWER indicator to take proper maintenance. W ARNING TEMP . indicator The projector is shut down and the W ARNIN TEMP . indicator is blinking red. When the temperature inside the projector reaches ...

  • Canon LV-8235 UST - page 67

    67 Be sure to reset the Filter counter after replacing the Filter . Resetting the Filter Counter Maintenance and Cleaning T urn off the projector , and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 1 2 Filter prevents dust from accumulating on the optical elements inside the project ...

  • Canon LV-8235 UST - page 68

    68 Cleaning the Projector Cabinet Cleaning the Projection Window Unplug the AC power cord before cleaning. First, remove the dust with a commercially available air blower . Then gently wipe the projection window surface. Use a cleaning paper moistened with methyl alcohol (methanol). A void using an excessive amount of cleaner . Do not use abrasive ...

  • Canon LV-8235 UST - page 69

    69 When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. For continued safety , replace with a lamp of the same type ...

  • Canon LV-8235 UST - page 70

    70 This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard.  Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life ...

  • Canon LV-8235 UST - page 71

    71 Maintenance and Cleaning Appendix T roubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 18-20. – Make sure all equipment is connected to AC outlet and the power is turned on. – When t ...

  • Canon LV-8235 UST - page 72

    72 Appendix Problem Solutions Pages Image Image is out of focus.  Adjust focus of the projector . 27  Provide proper distance between the projector and the projection screen. 17  Check the projection window to see if it needs cleaning. 68  Moving the projector from a cool to warm place may result in moisture condensation on the projecti ...

  • Canon LV-8235 UST - page 73

    73 Appendix W ARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain serv ...

  • Canon LV-8235 UST - page 74

    74 Menu T ree Mode 1 Mode 2 SVGA 1 - - - - T otal dots Horizontal position V ertical position Reset Computer Input PC adjust Mode 1 ~10 Aspect Y es / No * Systems displayed in the System Menu vary depending on an input signal. Computer Input/HDMI Input/Video Input Sound V olume Mute On / Of f Sound 0-63 Clamp Store Mode free System (1) Mode 1 ~10 S ...

  • Canon LV-8235 UST - page 75

    75 P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N 1080i 720p 575p 480p 575i 480i Presentation High contrast User 1 User 2 User 3 0-63 0-63 Off / L1 / L2 / Film Image select System (2) System (3) Image adjust Contrast Brightness Color T int Red Green Blue Sharpness Reset Store Gamma Progressive 0-63 0-63 0-63 0-15 Default / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 User ...

  • Canon LV-8235 UST - page 76

    76 Check the indicators for projector condition. • • • on.  /  • • • Differs according to conditions. • • • blinking. Indicators and Projector Condition Appendix Indicators POWER W ARNING TEMP . LAMP REPLACE 3D Projector Condition Red/Green Red Y ellow Blue Normal Condition The projector is off. (The AC power cord is unplugg ...

  • Canon LV-8235 UST - page 77

    77 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V -, H- Frequency mentioned below and less than 150 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.  Note: • The mark "  " indicates that the 3D image can be projected. • Alphabet letter &q ...

  • Canon LV-8235 UST - page 78

    78 Appendix  Note: • The mark "  " indicates that the 3D image can be projected. • Alphabet letter "i" placed beside some of the resolutions represents interlace signal. • The specifications are subject to change without notice. • Depending on your PC settings, the digital signals of your PC may not be projected co ...

  • Canon LV-8235 UST - page 79

    79 T echnical Specifications Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 12.6" x 6.7" x 15.2" (321.0 mm x 170.0 mm x 385.0 mm) (Not including protrusions) Net Weight 13.7 lbs (6.2 kg) Feet Adjustment ±1.0˚ DLP Chip Projection System 0.65" Single DLP chip, 6 segment Color Wheel Number of ...

  • Canon LV-8235 UST - page 80

    80 Appendix Model No. COMPONENT -VGA Cable : L V -CA32 Remote Controller : L V -RC05 Ceiling Attachment : L V -CL20 High Ceiling Attachment : L V -CL21 W all Attachment : L V -WL01 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer . Optional Parts This projector is co ...

  • Canon LV-8235 UST - page 81

    81 COMPUTER IN 1 /COMPONENT IN (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red(R/Cr) Input Ground (Horiz.sync.) Green(G/Y) Input ----- Blue (B/Cb) Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 5V Power Horiz. sync. Input (Composite H/V sync.) Ground (V ert.sync.) DDC Data Ground V ert. sync ...

  • Canon LV-8235 UST - page 82

    82 Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service center . PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of the project ...

  • Canon LV-8235 UST - page 83

    83 Dimensions Appendix 1.16(29.5) 6.73(171.0) 6.89(175.0) 15.20(386.0) 15.16(385.0) 7.25(184.0) 1.43(36.2) 0.04(1.0) 1.31(33.2) 7.13(181.2) 4.16(105.6) 3.45(87.6) 12.09(307.0) 6.22(158.0) 3.92(99.6) 2.09(53.0) 12.64(321.0) 6.25(158.8) 3.92(99.5) 0.87(22.2) 3.21(81.5) 0.87(22.2) 0.39 2.43(61.6) 2.43(61.6) 3.05(77.5) 0.63(16.0) 7.48(190.0) 14.17(359. ...

  • Canon LV-8235 UST - page 84

    CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this prod uct, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canad a CANON CANADA INC. MONTREA ...

Manufacturer Canon Category Projector

Documents that we receive from a manufacturer of a Canon LV-8235 UST can be divided into several groups. They are, among others:
- Canon technical drawings
- LV-8235 UST manuals
- Canon product data sheets
- information booklets
- or energy labels Canon LV-8235 UST
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon LV-8235 UST.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon LV-8235 UST, service manual, brief instructions and user manuals Canon LV-8235 UST. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon LV-8235 UST.

Similar manuals

A complete manual for the device Canon LV-8235 UST, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon LV-8235 UST by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon LV-8235 UST.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon LV-8235 UST - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon LV-8235 UST, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon LV-8235 UST, that we can find in the current document
3. Tips how to use the basic functions of the device Canon LV-8235 UST - which should help us in our first steps of using Canon LV-8235 UST
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon LV-8235 UST
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon LV-8235 UST in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon LV-8235 UST?

Use the form below

If you did not solve your problem by using a manual Canon LV-8235 UST, ask a question using the form below. If a user had a similar problem with Canon LV-8235 UST it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)