English dropdown-ico

Manual Fisher ICR-B35

29 pages 0.26 mb
Download

Go to site of 29

Summary
  • Fisher ICR-B35 - page 1

    ICR-B35 INSTRUCTION MANUAL Digital V oice Recorder SANYO'S HELP-LINE Call the toll-free number below if you have any difficulties operating this product. 1-877-999-1840 (Weekdays 8:00 AM - 5:00 PM Pacific time) LlNEA DE CONSUL T A SANYO Llame gratis al número indicado a continuación si tiene dificultades al utilizar este producto. 1-877-999- ...

  • Fisher ICR-B35 - page 2

    -1- CONTENTS PRECAUTIONS .............................................. 2 CONTROLS .................................................... 3 POWER SUPPL Y ........................................... 4 BEFORE OPERA TION ................................... 6 SELECTING THE MENU MODE .................... 8 RECORDING ....................................... ...

  • Fisher ICR-B35 - page 3

    -2- PRECAUTIONS • If the line of rectangles in the battery indica- tor ( ) disappear during recording, stop the recording immediately and replace the batteries. • Do not disconnect the AC adaptor or remove the batteries while operating the unit. • Before erasing, make sure that the battery indicator is full. • The apparatus shall not be exp ...

  • Fisher ICR-B35 - page 4

    -3- ...

  • Fisher ICR-B35 - page 5

    -4- 1. Earphone jack (EAR) 2. External microphone jack (MIC) 3. Built-in microphone (MIC) 4. Record button ( m )/Pause 5. Repeat button (REPEA T) 6. Stop button ( n )/On, Off select button 7. Play button ( a )/Pause 8. Cue index button (CUE INDEX) 9. Fast forward/Fast backward buttons ( d , c ) 10. V olume buttons (VOLUME) 1 1. Speaker 12. Erase bu ...

  • Fisher ICR-B35 - page 6

    -5- Battery indicator ( ) The line of rectangles is the battery gauge. Black rectangles show the battery condition. : Full, good condition or ( “ LOW BA TT ” appears.): W eak or exhausted battery , must be replaced. CAUTION: Remove the batteries if the unit will not be used for a month or longer . IMPORT ANT NOTE FOR AMERICAN USERS: SPENT OR DI ...

  • Fisher ICR-B35 - page 7

    -6- BEFORE OPERA TION Earphone Connect an earphone (8 ohms, cord length less than 2 meters (6 feet 6 inches), not supplied) to the EAR jack. (The speaker is automatically dis- connected.) Note: Be sure to reduce the volume before con- necting or disconnecting the earphone. External microphone Connect an external microphone (not supplied) to the MIC ...

  • Fisher ICR-B35 - page 8

    -7- Set the HOLD switch to ON. “ HOLD ON ” appears briefly on the display . For normal use, set the switch to OFF . “ HOLD OFF ” appears briefly on the display . Adjusting the date and time 1. Press the MENU button re- peatedly until the date and time display appears. 2. Press the TIME/SET button. The year display blinks. 3. Press the c or ...

  • Fisher ICR-B35 - page 9

    -8- SELECTING THE MENU MODE 1. Press the MENU button re- peatedly to select the desired menu mode. Each time the button is pressed, the display changes as follows: FOLDE (Folder) v EDIT v AUTO P AUSE v Date and time v V AS v REC v BEEP v ERASE GUARD v 12/24 v Original display returns 2. T o change the setting of a sub-menu in the selected menu mode ...

  • Fisher ICR-B35 - page 10

    -9- EDIT : Selecting edit mode OVER WRITE wv INSER (Insert) OVER WRITE: Overwrite recording INSER: Insertion recording ( “ INSERT ” ap- pears on the display .) AUTO P AUSE: Selecting auto pause time mode P AUSE 03SEC wv P AUSE 04SEC w ... v P AUSE 10SEC wv P AUSE OFF wv P AUSE 01SEC wv P AUSE 02SEC wv ... Note: The initial setting of the auto p ...

  • Fisher ICR-B35 - page 11

    -10- REC: Selecting recording time mode REC ST AND (Standard) wv REC LONG REC ST AND: For better sound quality (The unit can record for up to approx. 33 minutes.) REC LONG: For longer recording (The unit can record for up to approx. 197 minutes.) BEEP: Selecting beep mode BEEP ON wv BEEP OFF BEEP ON: Every time the operation buttons are pressed, a ...

  • Fisher ICR-B35 - page 12

    -11- RECORDING 1. Press the n button to turn the power on. 2. Set the REC MODE switch (back of the unit) to select the desired recording mode. DIC (Dictating): “ ” appears. CONF (Conference): “ ” appears. LECT (Lecture): “ ” appears. Note: If an external microphone (not supplied) is connected, the recording mode cannot be changed. “ ? ...

  • Fisher ICR-B35 - page 13

    -12- Note: • The unit can record up to file number 99 for each folder (except ALARM folder). • When the recording time is full, “ MEMOR FULL ” appears briefly . In this case, erase the unnecessary file. • If the CUE INDEX button is pressed during recording, an index mark is made (INDEX number appears briefly) and recording continues. (Up ...

  • Fisher ICR-B35 - page 14

    -13- EDIT THE RECORDED DA T A Overwrite recording T o overwrite recorded material (Previous recorded material will be erased.) 1. Select the “ OVER WRITE ” edit mode. (See “ SELECTING THE MENU MODE ” .) 2. Locate the desired point during playback, then press the a button to pause. • Elapsed playing time blinks. 3. Press the m button. Over ...

  • Fisher ICR-B35 - page 15

    -14- ...

  • Fisher ICR-B35 - page 16

    -15- Auto pause When the end of the file is reached during play- back, “ AUTO ” and “ P AUSE ” appear in turn. The unit pauses automatically for the preset auto pause time. After the set time elapses, the next file playback begins. Press the a button during auto pause to return to the normal pause mode. File skip Press the c or d button to ...

  • Fisher ICR-B35 - page 17

    -16- Repeat 1 . Press the REPEA T button during playback. “ ” appears. The unit plays back repeatedly the last 5 sec- onds of recorded content in the selected file. (If the recorded times are shorter than 5 sec- onds, repeat playback starts from the begin- ning of the current file.) 2. Press the REPEA T button again to return to normal playback ...

  • Fisher ICR-B35 - page 18

    -17- ERASING Important Note: Before erasing, make sure that the battery indi- cator is full. Preparations 1. Press the MENU button to select “ FOLDE ” . 2. Press the TIME/SET button. The folder name blinks. 3. Press the c or d button to select the folder to be erased, then press the TIME/SET but- ton. 4. Press the n button to return to the orig ...

  • Fisher ICR-B35 - page 19

    -18- Erasing one folder memory 1. Press the ERASE button twice. The folder name, file numbers and “ ERASE ” blink. 2. While the display is blinking, press the TIME/ SET button. “ ERASE ” appears briefly . All memories in the selected folder are erased. Erasing all memories 1. Press the ERASE button three times. “ MEMOR ALL ERASE ” blink ...

  • Fisher ICR-B35 - page 20

    -19- Notes: • The ERASE button will not function during re- cording and playback. • Erase all function can only be operated if in the actual selected folder there is at least one file. Erasing guard Erasing guard functions to prevent accidental erasure. 1. Press the MENU button repeatedly to select “ ERASE GUARD ” . 2. Press the TIME/SET bu ...

  • Fisher ICR-B35 - page 21

    -20- VOICE ALARM TIMER 1. Press the n button to turn the power on. 2. Select the sub-menu “ ALARM ” of “ FOLDE ” . (See “ SELECTING THE MENU MODE ” .) “ FOLDE ALARM ” appears. 3. Press the n button to return to the original display mode. 4. Press the c or d button to select the file number (01/02 or 02/02). 5. Press the m button to ...

  • Fisher ICR-B35 - page 22

    -21- During playback mode: The operation is the same as “ At stop mode ” as above. And, it goes back to the previous point and pauses. During recording mode: Beep 1 time (Recording will not be interrupted.) At power off mode: • Beep 1 time & V oice message (If voice mes- sage is recorded.) • Beep 10 times (If no voice message is re- cor ...

  • Fisher ICR-B35 - page 23

    -22- TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE CORRECTIVE ACCTION The unit does not operate. The batteries are discharged or not installed. Insert two new “ AAA ” batteries. “ ” appears. The batteries are discharged. Insert two new “ AAA ” batteries. “ HOLD ” appears when the operation button is pressed. Hold function is set. Set ...

  • Fisher ICR-B35 - page 24

    -23- FCC INFORMA TION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any inter- ference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressl ...

  • Fisher ICR-B35 - page 25

    -24- • Reorient or relocate the receiving antenna. • Increase the separation between the equip- ment and receiver . • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. SPECIFICA TIONS Frequency response 150 Hz - 3,40 ...

  • Fisher ICR-B35 - page 26

    -25- For USA SANYO SERVICE PLUS LIMITTED W ARRANTY DICT A TION PRODUCTS ONL Y OBLIGA TIONS In order to obtain factory warranty service for Sanyo Dictation Products, call the toll-free number below . The unit must be packed in the original carton or a well-padded sturdy carton in order to avoid shipping damage. Note: Do not return this unit to the r ...

  • Fisher ICR-B35 - page 27

    -26- Subject to the OBLIGA TIONS above and EXCLU- SIONS below , SANYO FISHER COMP ANY (SFC) warrants this SANYO Dictation product against defects in materials and workmanship for the pe- riods of LABOR and P ARTS specified below . SFC will, at its option, within two business days after its receipt of any dictation product that fails to conform to t ...

  • Fisher ICR-B35 - page 28

    -27- The foregoing is in lieu of all other expressed warranties and SFC does not assume or author- ize any party to assume for it any other obligation or liability . THE DURA TION OF ANY W ARRANTIES WHICH MA Y BE IMPLIED BY LA W (INCLUDING THE W ARRANTIES OF MERCHANT ABILITY AND FITNESS) IS LIMITED T O THE TERM OF THIS W ARRANTY . IN NO EVENT SHALL ...

  • Fisher ICR-B35 - page 29

    -28- For your protection in the event of theft or loss of this product, please fill in the information below for your own personal records. Model No. Serial No. (Located on back or bottom side of unit) Date of Purchase Purchase Price Where Purchased 21605 Plummer Street Chatsworth, CA 9131 1 ...

Manufacturer Fisher Category Microcassette Recorder

Documents that we receive from a manufacturer of a Fisher ICR-B35 can be divided into several groups. They are, among others:
- Fisher technical drawings
- ICR-B35 manuals
- Fisher product data sheets
- information booklets
- or energy labels Fisher ICR-B35
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fisher ICR-B35.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fisher ICR-B35, service manual, brief instructions and user manuals Fisher ICR-B35. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fisher ICR-B35.

Similar manuals

A complete manual for the device Fisher ICR-B35, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fisher ICR-B35 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fisher ICR-B35.

A complete Fisher manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fisher ICR-B35 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fisher ICR-B35, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fisher ICR-B35, that we can find in the current document
3. Tips how to use the basic functions of the device Fisher ICR-B35 - which should help us in our first steps of using Fisher ICR-B35
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fisher ICR-B35
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fisher ICR-B35 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fisher ICR-B35?

Use the form below

If you did not solve your problem by using a manual Fisher ICR-B35, ask a question using the form below. If a user had a similar problem with Fisher ICR-B35 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)