-
Tripp Lite B140-1P0-WP-1 - page 1
1 Owner ’s Manual 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/support Copyright © 2011 T ripp Lite. All rights reserved. DVI over Cat5 Extenders and Extender/Splitters Extender Kit Models: B140-101, B140-1P1- WP-1, B140-101X, B140-1A1- WP Local Unit Models: B140-002 and B140-004 Remote Unit Models: B140-1P0, B140-1P0- WP-1, B1 ...
-
Tripp Lite B140-1P0-WP-1 - page 2
2 P ackage Contents Product F eatures B140-101 B140-1P1- WP-1 B140-101X B140-1A1- WP B140-002 B140-004 B140-1A0 B140-1A0- WP-1 B140-1P0 B140-1P0- WP-1 B140-110 Local Unit (L), Remote Unit (R), or Both (B) B B B B L L R R R R R External Power Supplies (0, 1, or 2) 0 0 1 2 1 1 1 1 0 0 1 Mounting Hardware X X X X X Wallplate Screws X X X X Screwdriver ...
-
Tripp Lite B140-1P0-WP-1 - page 3
3 Product F eatures B140-1P1- WP-1 • DVIoverCat5P assiveExtenderWallplateKit • Extenda1024x768(60Hz)signalupto75ft.fromthesource,ora 1920x1080(60Hz)signalupto50ft.fromthesource • RJ45-stylewallplatesallowfortheuseof ...
-
Tripp Lite B140-1P0-WP-1 - page 4
4 Product F eatures B140-002 • 2-P ortDVIoverCat5Extender/SplitterLocalT ransmitterUnit (Box-style) • SplitsaDVI-DSingle-Linksignalinto2separatesignals • W orkswithremote/repeaterandreceiverunitstoextendaDVI-D Single-Linksignalpassedthe16-ft. ...
-
Tripp Lite B140-1P0-WP-1 - page 5
5 Product F eatures B140-1A0 • DVIoverCat5ActiveExtenderRemoteReceiverUnit(Box-style) • W orkswithB140-002andB140-004extender/splitterstoextenda 1024x768(60Hz)signalupto200ft.fromthesource,ora 1920x1080(60Hz)signalupto150ft ...
-
Tripp Lite B140-1P0-WP-1 - page 6
6 Product F eatures B140-1P0- WP-1 • DVIoverCat5P assiveExtenderWallplate • W orkswithB140-002andB140-004extender/splitterstoextenda 1024x768(60Hz)signalupto75ft.fromthesource,ora1920x 1080(60Hz)signalupto50ft.fromthesource ...
-
Tripp Lite B140-1P0-WP-1 - page 7
7 Product F eatures Optional Accessories: • B132-004-RB1URackmountBracket • N202-SeriesCat624A WG,solidwirepatchcables • P561-SeriesDVI-DSingle-Linkcables 201110026-93-3094-EN.indd 7 11/3/2011 11:37:06 AM ...
-
Tripp Lite B140-1P0-WP-1 - page 8
8 Mounting (Optional) The B140-101X, B140-002, B140-004, B140-1A0 and B140-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The B140-004 can also be mounted to a T ripp Lite B132-004-R ...
-
Tripp Lite B140-1P0-WP-1 - page 9
TO D VI SOURCE RJ45 JACK Cat5/5e/6 P A TCH CABLE LOCAL UNIT POWER JACK REMOTE UNIT TO D VI MONITOR B140-101 — Up to 100 ft. at 1024 x 768 (60 Hz), or up to 50 ft. at 1920 x 1080 (60 Hz) B140-1P1-WP-1 — Up to 75 ft. at 1024 x 768 (60 Hz), or up to 50 ft. at 1920 x 1080 (60 Hz) B140-101X and B140-1A1-WP — Up to 200 ft. at 1024 x 768 (60 Hz), or ...
-
Tripp Lite B140-1P0-WP-1 - page 10
10 Standard Extender Kit Installation 3 B140-1A1- WP only: Connect the external power supply to the local unit and plug it into a T rip Lite Surge Suppressor , Power Distribution Unit(PDU),orUninterruptablePowerSupply(UPS).TheGreen Power LED will illuminate. 4 ConnecttheRJ45portsonthelocalandremote ...
-
Tripp Lite B140-1P0-WP-1 - page 11
D VI SOURCE B140-1A1-WP LOCAL TRANSMITTER B140-1A1-WP REMOTE RECEIVER B140-110 REMOTE REPEA TER B140-110 REMOTE REPEA TER B140-110 REMOTE REPEA TER Up to 175 ft. at 1024 x 768 (60Hz) Up to 125 ft. at 1920 x 1080 (60Hz) Up to 175 ft. at 1024 x 768 (60Hz) Up to 125 ft. at 1920 x 1080 (60Hz) 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 ...
-
Tripp Lite B140-1P0-WP-1 - page 12
12 4 UsingCat5e/6cable,connecttheRJ45portonthelocalunittothe RJ45INPUTportontheB140-110remote/repeaterunit. 5 Connect a monitor to the DVI OUTPUT port on the remote/repeater unitusingaT rippLiteP561-SeriesDVI-DSingle-LinkCable. 6 Connect the external power supply to ...
-
Tripp Lite B140-1P0-WP-1 - page 13
13 11 UsingCat5e/6cable,connecttheRJ45OUTPUTportonthelast remote/repeaterunittotheRJ45INPUTportoftheB140-101Xor B140-1A1- WP remote receiver unit. 12 Connect a monitor to the DVI OUTPUT port on the remote receiver unitusingaT rippLiteP561-SeriesDVI-DSingle-Link? ...
-
Tripp Lite B140-1P0-WP-1 - page 14
B140-004 B140-1A0 B140-1P0 B140-1A0-WP-1 Up to 200 ft. at 1024 x 768 (60Hz) Up to 150 ft. at 1920 x 1080 (60Hz) Up to 100 ft. at 1024 x 768 (60Hz) Up to 50 ft. at 1920 x 1080 (60Hz) Up to 75 ft. at 1024 x 768 (60Hz) Up to 50 ft. at 1920 x 1080 (60Hz) DVI OVER Cat5 EXTENDER REMOTE UNIT MODEL: B140-1P0 B140-1P0-WP-1 14 Standard Extender/Splitter Inst ...
-
Tripp Lite B140-1P0-WP-1 - page 15
15 Standard Extender/Splitter Installation 1 Make sure the DVI source is powered OFF . 2 Connect the DVI source to the DVI port on the B140-002 or B140-004labeledINPUTusingaT rippLiteP561-SeriesDVI-D Single-Link Cable. 3 Optional for B140-004: Connect a DVI monitor to the DVI port on theB140-004markedL OCALusi ...
-
Tripp Lite B140-1P0-WP-1 - page 16
16 9 ConnecttheB140-1P0DVI-DSingle-Linkconnectortothemonitor; or , connect the B140-1P0- WP-1, B140-1A0 or B140-1A0- WP-1 to themonitorusingaT rippLiteP561-SeriesDVI-DSingle-LinkCable. TheGreenRJ45LEDontheB140-1P0andtheGreenLEDonthe B140-1P0- WP-1 illumi ...
-
Tripp Lite B140-1P0-WP-1 - page 17
OPTIONAL LOCAL MONITOR B140-004 LOCAL TRANSMITTER B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA TER Up to 175 ft. at 1024 x 768 (60Hz) Up to 125 ft. at 1920 x 1080 (60Hz) Up to 175 ft. at 1024 x 768 (60Hz) Up to 125 ft. at 1920 x 1080 (60Hz) D VI SOURCE B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA TER B140-110 RE ...
-
Tripp Lite B140-1P0-WP-1 - page 18
18 Extender/Splitter with Remote/R epeater Installation (B140-1A0 and B140-1A0- WP-1 remote receiver units only) 2 ConnecttheDVIsourcetotheINPUTportontheB140-002or B140-004usingaT rippLiteP561-SeriesDVI-DSingle-LinkCable. 3 Optional for B140-004: Connect a local monitor to the DVI OUTPUT? ...
-
Tripp Lite B140-1P0-WP-1 - page 19
19 Extender/Splitter with Remote/R epeater Installation (B140-1A0 and B140-1A0- WP-1 remote receiver units only) 10 Connect the external power supply to the remote/repeater unit and plugitintoaT rippLiteSurgeSuppressor ,PDUorUPS.TheGreen PowerLEDandtheGreenRJ45LEDsilluminatetoindicat ...
-
Tripp Lite B140-1P0-WP-1 - page 20
Lev el 1 Lev el 2 Lev el 3 OPTIONAL LOCAL MONITOR B140-1P0 — Up to 100 ft. at 1024 x 768 (60 Hz), or up to 50 ft. at 1920 x 1080 (60 Hz) B140-1P0-WP-1 — Up to 75 ft. at 1024 x 768 (60 Hz), or up to 50 ft. at 1920 x 1080 (60 Hz) B140-1A0 and B140-1A0-WP-1 — Up to 200 ft. at 1024 x 768 (60 Hz), or up to 150 ft. at 1920 x 1080 (60 Hz) 20 Extende ...
-
Tripp Lite B140-1P0-WP-1 - page 21
21 Extender/Splitter Daisy-Chain Installation 1 Make sure the DVI source is powered OFF . 2 Connect the DVI source to the DVI port on the B140-004 labeled INPUTusingaT rippLiteP561-SeriesDVI-DSingle-LinkCable. 3 Connect the external power supply to the B140-004 local unit and plugitintoaT rippLiteSurgeSu ...
-
Tripp Lite B140-1P0-WP-1 - page 22
22 Extender/Splitter Daisy-Chain Installation 12 ConnecttheB140-1P0DVI-DSingle-LinkConnectortothemonitor; or , connect the B140-1P0- WP-1, B140-1A0 or B140-1A0- WP-1 to themonitorusingaT rippLiteP561-SeriesDVI-DSingle-LinkCable. TheGreenRJ45LEDontheB140-1P0andtheGre ...
-
Tripp Lite B140-1P0-WP-1 - page 23
OPTIONAL LOCAL MONITOR B140-004 LOCAL TRANSMITTER B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA TER Up to 175 ft. at 1024 x 768 (60Hz) Up to 125 ft. at 1920 x 1080 (60Hz) Up to 175 ft. at 1024 x 768 (60Hz) Up to 125 ft. at 1920 x 1080 (60Hz) B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA TER B140-110 REMOTE/ REPEA ...
-
Tripp Lite B140-1P0-WP-1 - page 24
24 Extender/Splitter Daisy-Chain with Remote/ Repeater Installation (B140-004 e xtender/splitter , and B140-1A0 and B140-1A0- WP remote receivers only) 1 Make sure the DVI source is powered OFF . 2 ConnecttheDVIsourcetotheINPUTportontheB140-004usinga T rippLiteP561-SeriesDVI-DSingle-LinkCable. 3 ...
-
Tripp Lite B140-1P0-WP-1 - page 25
25 Extender/Splitter Daisy-Chain with Remote/ Repeater Installation (B140-004 e xtender/splitter , and B140-1A0 and B140-1A0- WP remote receivers only) Up to 4 units can be daisy-chained (3 remote/repeaters and 1 receiver). T o connect additional remote/repeater units, proceed to step 11. T o nishyourinstallationwithaB140-1A0or ...
-
Tripp Lite B140-1P0-WP-1 - page 26
26 18 Repeatsteps8through17foreachadditionalRJ45outputporton the local transmitter units. 19 T urnonthepowertotheDVIsource.TheOrangeRJ45LEDson the local transmitter , remote/repeater and B140-1A0 illuminate to indicate a signal is being received from the source. The Orange L ...
-
Tripp Lite B140-1P0-WP-1 - page 27
27 W arranty & W arranty Registration 1- Y ear Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. ...
-
Tripp Lite B140-1P0-WP-1 - page 28
28 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/support 201110026•933094 201110026-93-3094-EN.indd 28 11/3/2011 11:37:17 AM ...
Do you have a question concerning Tripp Lite B140-1P0-WP-1?
Use the form below
If you did not solve your problem by using a manual Tripp Lite B140-1P0-WP-1, ask a question using the form below. If a user had a similar problem with Tripp Lite B140-1P0-WP-1 it is likely that he will want to share the way to solve it.