Manual Pelco C674M

12 pages 14.91 mb
Download

Go to site of 12

Summary
  • Pelco C674M - page 1

    DX7100 Hard Drive Replacement Instructions for the System Drive C674M (2/06) Digital Video Recorder DX7100 ...

  • Pelco C674M - page 2

    ...

  • Pelco C674M - page 3

    C674M (2/06) 3 Introduction This manual provides instructions for replacing the primary master hard drive in a DX7100 Series DVR (digital video recorder). PARTS LIST NOTE: This replacement kit includes a Pelco-certified hard disk drive. Using any other hard disk drive with the DX7100 voids the manufacturer's warranty for the DX7100. 1 120 GB ...

  • Pelco C674M - page 4

    4 C674M (2/06) Installation T o replace the primary master hard drive: 1. T o protect the DVR and its components against electrostatic discharge, make sure that you are properly grounded so that any built-up static electric charges are dissipated away from the unit. The most effective way to do this is to use a properly grounded wrist strap. If a w ...

  • Pelco C674M - page 5

    C674M (2/06) 5 4. Locate the hard drives in the front of the DVR (refer to Figure 2). There is one hard drive cage in the center front that can hold as many as four hard drives. There is another against the side of the chassis that can hold as many as two hard drives. The top hard drive in the two-drive cage is the primary master that will be repla ...

  • Pelco C674M - page 6

    6 C674M (2/06) 5. Remove the cage that holds four hard drives: a. Disconnect the power and data cables from any hard drives that are installed in the cage. b. Remove the two screws that hold the cage in place in the chassis (refer to Figure 3). c. Disconnect the ground wire that goes to the card cage (refer to Figure 4). d. The card cage is locked ...

  • Pelco C674M - page 7

    C674M (2/06) 7 6. Remove the card cage that holds two hard drives (refer to Figure 5): a. Disconnect the power and data cables from the hard drives that are installed in the cage. b. Remove the three screws that hold the cage in place in the chassis. c. The card cage is locked in place in the bottom of the chassis. T o unlock the card cage, slide t ...

  • Pelco C674M - page 8

    8 C674M (2/06) 7. Remove the two screws on each side of the cage that hold the primary master drive in place (refer to Figure 6). Remove the hard disk drive. Figure 6. Removing the Hard Disk Drive 8. V erify that the jumper on the replacement hard drive is set for master . Refer to Figure 7. Figure 7. Jumper Placement 9. Replace the hard drive. SCR ...

  • Pelco C674M - page 9

    C674M (2/06) 9 10. Reinstall the hard drive cages by following steps 2-7 in reverse order . Refer to Figure 8 to see how the cages are locked in place in the bottom of the chassis. Figure 8. Reinstalling the Hard Drive Cages WARNING: When you reinstall the hard drive cages, make sure that no wiring is underneath the cages. ...

  • Pelco C674M - page 10

    ...

  • Pelco C674M - page 11

    PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series ...

  • Pelco C674M - page 12

    United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 ...

Manufacturer Pelco Category Computer Drive

Documents that we receive from a manufacturer of a Pelco C674M can be divided into several groups. They are, among others:
- Pelco technical drawings
- C674M manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco C674M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco C674M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco C674M, service manual, brief instructions and user manuals Pelco C674M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco C674M.

Similar manuals

A complete manual for the device Pelco C674M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco C674M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco C674M.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco C674M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco C674M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco C674M, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco C674M - which should help us in our first steps of using Pelco C674M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco C674M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco C674M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco C674M?

Use the form below

If you did not solve your problem by using a manual Pelco C674M, ask a question using the form below. If a user had a similar problem with Pelco C674M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)