Manual Lowrance electronic 10764001

127 pages 8.99 mb
Download

Go to site of 127

Summary
  • Lowrance electronic 10764001 - page 1

    ENGLISH HDS Gen2 T ouch Operator manual lowr ance .com ...

  • Lowrance electronic 10764001 - page 2

    Cop yright © 2012 Navic o All Rights Reserved Lowrance® and Na vico® are reg istered trademarks of Navico. F ishing Hot Spots® is a regist ered trademark of F ishing Hot Spots Inc. Copyright© 2012 F ishing Hot Spots. Navionics® is a reg istered trademark of Navionics, Inc. NMEA 2000® is a regist ered trademark of the National Marine Elec tro ...

  • Lowrance electronic 10764001 - page 3

    | 1 Pr eface As Navico is continuously impr oving this product, we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. P lease contact your Lowrance dealer if y ou require an y further assistance. It is the owner ’ s sole responsibility to install and use the instrument and transd ...

  • Lowrance electronic 10764001 - page 4

    2 | About this manual This manual is a ref erence guide f or operating the Lowrance HDS Gen 2 T ouch system. It assumes that all equipment is installed and configured, and that the syst em is ready to use . The manual does not cover basic background inf ormation about how equipment such as radars, sonars and AIS work. Such information is available ...

  • Lowrance electronic 10764001 - page 5

    PB | | 3 Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch C onten ts 7 HDS Gen2 T ouch scr een and ke ys 8 The HDS Gen2 T ouch home screen 9 Basic operation 9 The power key 9 First time startup 9 Us ing the t ouchsc reen 10 M e n u s 1 2 Dialog boxes 1 3 Po sition ing a Man Overboard wa ypoint 1 4 Screen capture 15 Pages ...

  • Lowrance electronic 10764001 - page 6

    4 | | 5 Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch 36 Navigating 36 G oto cur so r 36 Navig ating on t he chart 3 7 Navigation set tings panel 3 9 St eer page 40 Sonar 4 1 Zooming 4 2 Viewing sonar hi story 4 3 Sonar menu 4 4 Log sonar da ta 46 V iew 48 M eas uring d istanc e 4 9 Sonar settings 5 1 Installation set ...

  • Lowrance electronic 10764001 - page 7

    4 | | 5 Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch 67 Using Video (9” and 12” units only) 6 7 The video p age 6 7 Setting up the video page 68 The alarm sy stem 68 The alarms dia log 7 0 Acknowledgi ng a message 71 Utilities 71 Ve s s e l s 72 Su n/ moon 72 T rip Calculator 72 Fin d 72 Al ar ms 72 Way p oi nt s/ ...

  • Lowrance electronic 10764001 - page 8

    6 | | PB Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch 93 Using AIS 9 3 T arget s ymb ols 94 Viewing informa tion about AI S targets 95 Vessel alar ms 95 Th e vessel set tings p anel 97 Networking 9 7 Aut o c onfigura tion 9 7 Data sour c es 1 0 0 Device li st 1 0 0 Diagnostics 1 0 0 SIRI U S status ( U S only) 1 0 1 ...

  • Lowrance electronic 10764001 - page 9

    | 7 Introduction | Lowrance HDS Gen2 T ouch Introduction HDS Gen2 T ouchscreen and key s 1 T ouchscreen 2 SD Card re ader Used for optional InsightHD , Navionics, other compatible thir d-part y car tography , soft ware updates, transf er of user data and system backup. 3 Way p o i n t k ey A shor t press opens the waypoint menu . A long press opens ...

  • Lowrance electronic 10764001 - page 10

    8 | Introduction | Lowrance HDS Gen2 T ouch The HDS Gen2 T ouch home screen ¼ Note: vide o is only a vailable on HD S Gen2 T ou ch 9” and 1 2” units. The radar option will on ly be shown when the unit i s c onnected to a r a d a r. 1 Utilities panel T ap an icon to access utility data. 2 F av orites panel Used to display F avorite pages, save ...

  • Lowrance electronic 10764001 - page 11

    | 9 Basic Operation | Lowr ance HDS Gen2 T ouch Basic operation The po wer k ey • Pr ess and hold: T urn unit on/off • Single press: Display dialog for brightness adjustment, night mode, standby mode and power off • Repeated presses: T oggle preset brightness levels (10 - 6 - 3- 1) ¼ Note: If the p ower k ey is r elea sed before s ...

  • Lowrance electronic 10764001 - page 12

    10 | Basic Operation | Lowr ance HDS Gen2 T ouch Operation Menu/Dialogs P ages Char t Sonar R adar Ta p Select/toggle item Activate cursor Pr ess and hold n/a Activate cursor selection mode Drag Adjust slider value Scroll dialog Hide page menu (Drag right) P an chart (any direction) P an water column (any direction) P an sonar history (horizontal m ...

  • Lowrance electronic 10764001 - page 13

    | 11 Basic Operation | Lowr ance HDS Gen2 T ouch Back button Y ou can return to the previous screen or menu by pr essing the Back button. Hidden system menu The page menu for each operation mode has a hidden syst em menu. T o access the hidden system menu , place your finger on the top menu item and drag down. Page men u Hiding page menu Operation ...

  • Lowrance electronic 10764001 - page 14

    12 | Basic Operation | Lowr ance HDS Gen2 T ouch Settings dialog Y ou can access the settings dialog for each operation mode from the hidden system menu or from the Utilities panel on the home screen. Dialog box es Y ou selec t entr y fields and keys in a dialog box by tapping the screen. Y ou can only enter inf ormation when a field is selected ...

  • Lowrance electronic 10764001 - page 15

    | 13 Basic Operation | Lowr ance HDS Gen2 T ouch Using the cursor The cursor is by default not shown on any page . T ap the screen t o activate the cursor on the char t, sonar , structure and radar pages. The cursor information window will show position coor dinates at the cursor position and range and bearing to the vessel. On the Sonar page, the ...

  • Lowrance electronic 10764001 - page 16

    14 | Basic Operation | Lowr ance HDS Gen2 T ouch Cancel na vigation The unit will continue navigating towar d the MOB waypoint until the waypoint is reached or until you cancel na vigation. Delete a MOB wa ypoint 1. Cancel navigation. 2. Ta p Wa ypo int MO B on the pa ge menu. 3. Ta p Delete . Screen capture Simultaneously press and hold the P AGES ...

  • Lowrance electronic 10764001 - page 17

    | 15 Pages | L owrance HDS Gen2 T ouch P ages P age ov erview This unit supports up to 7 page t ypes. Each has a corresponding group of pr econfigured quick split combo pages. ¼ Note: V ideo is avail able only on 9” and 1 2” units. T he radar option will only be sho wn when the unit i s con nec ted t o a radar . Quick splits are two-panel com ...

  • Lowrance electronic 10764001 - page 18

    16 | Pages | L owrance HDS Gen2 T ouch Selec ting Active panel Y ou can change ac tive panels by tapping the desired panel . The active panel will have an orange border . Adjusting splits The size of panels can be adjusted by tapping A djust splits on the hidden system menu. Drag the adjustment button horizontally t o resize the panels . T ap Save ...

  • Lowrance electronic 10764001 - page 19

    | 17 Pages | L owrance HDS Gen2 T ouch Y ou can selec t from seven diff erent panel configurations as illus- trated below . ¼ Note: Y ou can cycle thr ough fav orite pages by pr essi ng the PAG E S k e y. Editing fav orites 1. Ta p Customize on the F avorites panel 2. T ap an existing favorite 3. D rag a pa ge icon from the preview 4. Ta p Save ...

  • Lowrance electronic 10764001 - page 20

    18 | Pages | L owrance HDS Gen2 T ouch Deleting fav orites 1. Ta p Customize on the F avorites panel 2. T ap the page icon for the pag e you want to r emove 3. Ta p Clear and tap S ave Data Overla y Allows you to ov erlay information on the active page. Y ou can turn on/off viewing of overlay data and edit/add overlay data by accessing the hidden ...

  • Lowrance electronic 10764001 - page 21

    | 19 Chart | Lowrance HDS Gen2 T ouch Char t The chart page displays your position relative to land and other char t objects. On the page you can plan and navigate r outes, place waypoints, ov erlay a radar image, a StructureMap image and weather information, and display AIS tar gets. ¼ Note: T his unit has different embe dde d car togr aphy dep ...

  • Lowrance electronic 10764001 - page 22

    20 | Chart | Lowrance HDS Gen2 T ouch Char t scale Y ou zoom in and out on the char t by using the ZOOM key s. Char t range scale and range rings inter val (when turned on) will be shown in the lower right corner of the chart panel. Using the cursor on the chart page The cursor is by default not shown on the chart page. When you tap the screen, the ...

  • Lowrance electronic 10764001 - page 23

    | 21 Chart | Lowrance HDS Gen2 T ouch Char t menu When the cursor is active, some featur es on the chart menu will be replaced with cursor mode f eatures. T ap Clear cursor to return to the normal char t menu. Saving wa ypoints When the cursor is not active, you can sav e a waypoint at the vessel position by tapping New w aypoint on the char t menu ...

  • Lowrance electronic 10764001 - page 24

    22 | Chart | Lowrance HDS Gen2 T ouch ¼ Note: T o me asur e di stance from y our ves sel, tap the des ired location on the map and the di stance t o th at location wi ll be shown in t he info box i n the lower left corner of the screen. 1. T ap the scre en and then tap Mea sure on the menu • The measuri ng icon s will a ppear with a li ne dra ...

  • Lowrance electronic 10764001 - page 25

    | 23 Chart | Lowrance HDS Gen2 T ouch Heading up Displays the chart with the vessel’ s heading directly up on the chart image. Heading information is r eceived from a compass . If heading is not available, then the C OG from the GPS will be used . Course up Rotates the chart in the direction of the nex t point when in navigation mode. If the unit ...

  • Lowrance electronic 10764001 - page 26

    24 | Chart | Lowrance HDS Gen2 T ouch Y ou can change the camera tilt angle and rotate the camera around the vessel by dragging y our finger on the screen. ¼ Note: W hen in ro tat e mode, u se horizonta l motion s to r otat e the vessel. U se v er tical motion s to c hange the view er perspec tive. When rotate is selected the camera position is ? ...

  • Lowrance electronic 10764001 - page 27

    | 25 Chart | Lowrance HDS Gen2 T ouch Medium This is the minimum information sufficient f or navigation F ull This is all available information f or the chart in use Cat egories Insight char ts includes several categories and sub -categories that you can turn on/off individually depending on which information you want to see on your displa y . Dis ...

  • Lowrance electronic 10764001 - page 28

    26 | Chart | Lowrance HDS Gen2 T ouch Selec ting chart data This unit can use built-in L owrance map data as well as Navionics , F ishing Hotspots, legacy LakeMaster and other third-par ty mapping cards. T ap Change to Navionics or Change t o Lowr ance to switch chart data the unit is using. ¼ Note: T he sys tem wi ll not aut oma tical ly switch t ...

  • Lowrance electronic 10764001 - page 29

    | 27 Chart | Lowrance HDS Gen2 T ouch Range Rings Y ou can turn on/off range r ings from the chart settings menu. The range rings can be used to show the distance from y our vessel to other chart objec ts. The range scale is set aut omatically by the system to suit the chart scale. Heading and Course e xtension The length of the extension lines ar ...

  • Lowrance electronic 10764001 - page 30

    28 | Chart | Lowrance HDS Gen2 T ouch Look ahead This option centers the chart slightly for ward of your vessel so y ou can maximize your view ahead. Vi e w The Navionics chart database provides you with detailed coastal car tography , with 2D and 3D view options. • 2D pr esen ts chart information in a ba sic mappi ng mode with Navionic s de t ...

  • Lowrance electronic 10764001 - page 31

    | 29 Chart | Lowrance HDS Gen2 T ouch Photo transparency The Photo transpar ency sets the opaqueness of the photo overlay . With minimum transparency settings the char t details will be almost hidden by the photo . Navionics F ish ’ n Chip This unit supports Navionics Fish ’n Chip (US only) chart feature. F or more inf ormation, see www.navioni ...

  • Lowrance electronic 10764001 - page 32

    30 | Chart | Lowrance HDS Gen2 T ouch Navionics settings Optional settings for Navionics charts T r aditional 2D chart Chart with shading Colored Seabed Ar eas Colors differ ent parts of the seabed to provide better definition of seabed composition. Annotation Determines what area information, such as names of locations and notes of areas , is av ...

  • Lowrance electronic 10764001 - page 33

    | 31 W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch W aypoints , r outes & tr ails The waypoin ts, r oute and trails scr eens The W aypoints , Routes and T rails dialogs give access to advanced edit functions and settings for all these items available on your system. W aypoint, r oute and trail screens ar e accessed from the hom ...

  • Lowrance electronic 10764001 - page 34

    32 | W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch P ositioning waypoints Placing a waypoint a t vessel position With the cursor inactive, you can position a wa ypoint at the vessel position from any page b y pressing the dedicated W A YPOINT key twice. Using the cursor to position wa ypoints On char t, sonar and structure pages yo ...

  • Lowrance electronic 10764001 - page 35

    | 33 W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch Moving a waypoint b y tapping the screen 1. T ap the way point - The waypoint na me will appear on the page menu 2. T ap the waypoint name 3. Ta p Move on the menu - The waypoint ic on wil l change to i ndicat e moving mode 4. D rag the w aypoint to its new position 5. Confirm the ...

  • Lowrance electronic 10764001 - page 36

    34 | W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch Creating r outes using existing w aypoints 1. Acc ess the routes dialog 2. Ta p New 3. Ta p Create using route list 4. T ap the new route window (shown below) 5. Ta p Inser t 6. T ap the desired waypoint 7. Repeat Steps 4 , 5 and 6 until all points have been placed 8. Ta p Save Edi ...

  • Lowrance electronic 10764001 - page 37

    | 35 W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch T rails A trail is a graphical presentation of the hist orical path of the vessel, allowing you to r etrace where you ha ve traveled . A trail can be con- verted to a route in the Trail scr een, as described later in this section. F rom the factory, the system is set to aut omatica ...

  • Lowrance electronic 10764001 - page 38

    36 | Navigating | Lo wrance HDS Gen2 T ouch Naviga ting The navigation function included in your unit allows you to na vigate towards the cursor position, a wa ypoint or along a predefined rout e. F or information about positioning waypoints and cr eating routes , ref er to “ W aypoints, r outes & trails ” on page 31. Goto cursor Y ou can ...

  • Lowrance electronic 10764001 - page 39

    | 37 Navigating | Lo wrance HDS Gen2 T ouch When route navigation is started, the menu will expand showing options for skipping a waypoint, or for restarting the route fr om current vessel position. Selec ting start p oint Y ou can navigate a route, starting from any r outepoint, by positioning the cursor over the selected routepoint and tapping th ...

  • Lowrance electronic 10764001 - page 40

    38 | Navigating | Lo wrance HDS Gen2 T ouch Arrival r adius Sets an invisible circle ar ound the destination waypoint. The vessel is considered arrived at the waypoint when it is within this radius. XTE limit (Cr oss track err or) This parameter defines the vessel’ s accepted offset distance from the leg . If the vessel goes beyond this limit a ...

  • Lowrance electronic 10764001 - page 41

    | 39 Navigating | Lo wrance HDS Gen2 T ouch Steer page The Steer page can be used to display inf ormation when you are navigating. Data elds The Steer page displays the f ollowing information: DTD Distance to destination XTE Cross track error SOG Speed over gr ound T TD Time to destination COG Course over g round POS P osition The course line Wh ...

  • Lowrance electronic 10764001 - page 42

    40 | | 41 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sonar The sonar function provides an underwater view of the area under and around your boat, allowing y ou to detect fish and examine bottom structure. The sonar displays the water column moving fr om right to left on the page. Y ou can selec t between single page view and ...

  • Lowrance electronic 10764001 - page 43

    40 | | 41 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch T o remove the cursor and cursor elements fr om the page, tap Clear cursor on the Sonar menu. Pr ess and hold the screen to activate cursor assist mode . Goto cursor Y ou can navigate to the cursor by tapping Goto cursor on the menu. Saving a wa ypoint Y ou can save a waypo ...

  • Lowrance electronic 10764001 - page 44

    42 | | 43 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch V iewing sonar hist or y Y ou can view sonar histor y by ac tivating the cursor and then dragging your finger horizontally acr oss the screen. Whenever the cursor is activated on the sonar page, the blue sonar history scroll bar will appear at the bottom of the screen. The ...

  • Lowrance electronic 10764001 - page 45

    42 | | 43 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sonar menu When the cursor is active, some featur es on the sonar menu will be replaced with cursor mode f eatures. T ap Clear cursor to return to the normal sonar menu. Range The range setting determines the water depth that is visible on the screen. T ap the range ke ys o ...

  • Lowrance electronic 10764001 - page 46

    44 | | 45 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Y ou can view t wo frequencies at the same time by selecting the sonar + sonar quicksplit combo option. Advanc ed Noise rejection Signal interference from bilge pumps , engine vibration and air bubbles can clutter the sonar screen. The noise rejection option filters the si ...

  • Lowrance electronic 10764001 - page 47

    44 | | 45 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Y ou can view t wo frequencies at the same time by selecting the sonar + sonar quicksplit combo option. Advanc ed Noise rejection Signal interference from bilge pumps , engine vibration and air bubbles can clutter the sonar screen. The noise rejection option filters the si ...

  • Lowrance electronic 10764001 - page 48

    46 | | 47 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sensitivity Increasing Sensitivity will show more detail on the screen; decreasing Sensitivity displays less. T oo much detail will clutt er the screen. Con versely , desired echoes ma y not be displayed if Sensitivity is set too low . ¼ Note: Auto Sen sitivity is the pref ...

  • Lowrance electronic 10764001 - page 49

    46 | | 47 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sensitivity Increasing Sensitivity will show more detail on the screen; decreasing Sensitivity displays less. T oo much detail will clutt er the screen. Con versely , desired echoes ma y not be displayed if Sensitivity is set too low . ¼ Note: Auto Sen sitivity is the pref ...

  • Lowrance electronic 10764001 - page 50

    48 | | 49 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Palettes Y ou can selec t from several display palettes optimiz ed for a variety of fishing conditions. T emp graph Shows a red line and a digital displa y on the sonar screen to graphically illustrate changes in water t emperature. Depth line Places a line on the bottom s ...

  • Lowrance electronic 10764001 - page 51

    48 | | 49 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Stop sonar Allows you to closely examine sonar echoes , precisely position a waypoint or stop interference between transducers on your boat. When sonar is stopped, no sonar history will be recorded . This function is also useful when using the cursor to measure a distance b ...

  • Lowrance electronic 10764001 - page 52

    50 | | 51 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Overlay Do wnscan™ Y ou can overlay a Downscan image on a normal sonar image. T ap Overlay do wnscan on the Sonar settings menu. When Overlay downscan is activated, the sonar menu will expand to include basic Structure options. T ap O verlay on the Structure options menu ...

  • Lowrance electronic 10764001 - page 53

    50 | | 51 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Installation settings Keel o set This is a value that can be entered on the sonar Installation page to make depth readings relate to an y point from the water surface, to the deepest point of the vessel. Below are some typical ways in which the offset is used: A) F or D ...

  • Lowrance electronic 10764001 - page 54

    52 | | PB Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch W a ter speed calibration W ater speed calibration is used to adjust the speed value from the paddle wheel to match the actual boat speed through the water . Actual speed can be determined from GPS speed over g round (SOG) or by timing the boat over a known distance. W ater ...

  • Lowrance electronic 10764001 - page 55

    PB | | 53 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch StructureScan HD™ StructureScan HD™ uses high frequencies to pro vide a high resolu- tion, picture -like image of the bottom. ¼ Note: Y ou mu st hav e a St ruc ture Scan HD transduc er in stalled to u se Stru c tu reSc an feature s. StructureScan HD pro ...

  • Lowrance electronic 10764001 - page 56

    54 | | 55 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Acc ess hidden cont ex t menu Fr equency Data overlay Bottom Range scale Range keys DownScan Using the cursor on the S tructureScan page The cursor is by default not shown on the StructureScan page. When you tap the screen the cursor will appear . The left/r ...

  • Lowrance electronic 10764001 - page 57

    54 | | 55 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Goto cursor Y ou can navigate to the cursor by tapping Goto cursor on the menu. Saving a wa ypoint Y ou can save a waypoint at the cursor position by tapping the screen and then tapping New waypoint on the StructureScan menu. T ap S ave on the waypoint dialo ...

  • Lowrance electronic 10764001 - page 58

    56 | | 57 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch StructureScan™ menu When the cursor is active, some featur es on the StructureScan menu will be replaced with cursor mode featur es. T ap Clear cursor to return to the normal StructureScan menu. Range DownScan range controls the water depth that is visible ...

  • Lowrance electronic 10764001 - page 59

    56 | | 57 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Flipping Left/Right image If required, the left/right Sidescanning images can be flipped to match the corresponding side of your vessel . Range lines Range lines ex tend from the range scale to the other side of the screen, making it easier to estimate dept ...

  • Lowrance electronic 10764001 - page 60

    58 | | PB StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Measuring distance The cursor can be used to measure the distance between two points on the StructureScan image. It is easier to use the measure function when the structure image is paused. ¼ Note: T he Measu re button will on ly be visible on the S tructur ...

  • Lowrance electronic 10764001 - page 61

    | 59 StructureMap | Lowrance HDS Gen2 T ouch StructureMap™ StructureMap™ is a tool that allows you to ov erlay SideScan sonar returns on top of the chart, giving you a birds-eye view of under wa- ter structure below and beside your boat. StructureMap makes it easier for you t o visualize the underwater environment in relation to your position a ...

  • Lowrance electronic 10764001 - page 62

    60 | StructureMap | Lowrance HDS Gen2 T ouch Live mode Displays the last few minutes of the Side Imaging history as a trail behind the vessel icon. The length of this trail will var y depending on the Side Imaging and Down I m- aging range settings. The higher the range settings the longer the history length that will show up behind the vessel icon ...

  • Lowrance electronic 10764001 - page 63

    | 61 StructureMap | Lowrance HDS Gen2 T ouch ¼ NOTE: If the re i s more than one S tructureMap of t he same area on the same SD car d, the map s will o verlap on y our scr een. If you want to ha ve mor e than one ma p of the same are a, you shou ld put the maps on sep arate SD cards. Structure options Range Controls the width of the SideScan histo ...

  • Lowrance electronic 10764001 - page 64

    62 | StructureMap | Lowrance HDS Gen2 T ouch Palett e Several display palettes with varying degrees of color and bright- ness are available . Con trast Adjusts the brightness ratio between light and dark areas of the screen, making it easier to distinguish objects from the background. W a ter column T urns on/off the viewing of the StructureScan w ...

  • Lowrance electronic 10764001 - page 65

    | 63 StructureMap | Lowrance HDS Gen2 T ouch Con v erting les T o create a StructureMap file you must conv er t a structure sonar log (.sl2) file to StructureMap format (.smf ). This can be done automatically from the Sonar L og menu, or manually by con verting logs from the F iles menu. Due t o the large size of StructureMap (.smf ) files, w ...

  • Lowrance electronic 10764001 - page 66

    64 | StructureMap | Lowrance HDS Gen2 T ouch Sharing les After structure sonar log (.sl2) files are conv erted to StructureMap (.smf ) files, they can be saved t o a SD card and used on other GPS capable HDS Gen 2 units without the need for the StructureScan module. Show StructureMap (.smf ) les Y ou can view Struc tureMap (.smf ) files fr ...

  • Lowrance electronic 10764001 - page 67

    PB | | 65 Instruments | Lowranc e HDS Gen2 T ouch Instruments | Lowranc e HDS Gen2 T ouch The Instrumen ts panels The Info page instrument panel consists of multiple gauges that can be customized to displa y selected data. The instrument panel dis- plays data on dashboards , and you can define up to ten dashboar ds within the instrument panel. T a ...

  • Lowrance electronic 10764001 - page 68

    66 | | PB Instruments | Lowranc e HDS Gen2 T ouch Instruments | Lowranc e HDS Gen2 T ouch Edit an Instrument dashboard 1. Selec t the dashb oard you want to edit. 2. Ta p Edit on the Instrument page m enu 3. T ap the gauge you want to change. The selec ted gauge will b e shaded in blue 4. Ta p Selec t info 5. T ap a data categor y 6. T ap a data ty ...

  • Lowrance electronic 10764001 - page 69

    PB | | 67 Video | L owrance HDS Gen2 T ouch Video | L owrance HDS Gen2 T ouch Using Video (9” and 12” units only) The video function allows you to view videos or camera sources on your unit’ s screen. F or information about how t o connect the camera, see the separate Installation manual. T ap the V ideo icon on the homescreen to access the V ...

  • Lowrance electronic 10764001 - page 70

    68 | Alarms | Lowr ance HDS Gen2 T ouch The A larm sy stem This unit will continuously check for danger ous situations and system faults while the system is running . When an alarm situation occurs, an alarm message will pop up on the screen. If you have enabled the siren, the alarm message will be f ollowed by an audible alarm. The alarm is record ...

  • Lowrance electronic 10764001 - page 71

    | 69 Alarms | Lowr ance HDS Gen2 T ouch T ype of messages The messages are classified accor ding to how the reported situation will affect your vessel . The f ollowing color codes are used: Color Impor tance Red Critical Orange Impor tant Y ellow Standard Blue W arning Green Light warning Single alarms A single alarm is displayed with the name of ...

  • Lowrance electronic 10764001 - page 72

    70 | Alarms | Lowr ance HDS Gen2 T ouch Acknowledging an alarm The following options ar e available in the alarm dialog for acknowledging a message: Option Result Close Sets the alarm state to acknowledged, meaning that you are awar e of the alarm condition. The siren will st op and the alarm dialog will be removed . The alarm will however remain a ...

  • Lowrance electronic 10764001 - page 73

    | 71 Utilities | Lowranc e HDS Gen2 T ouch Utilities The Utilities tab includes options and tools that are not specific to any page. Utilities are accessed fr om the homescreen. T apping a utility will open a dialog giving you access to available options for the selected item. When you selec t a utility, a dialog will open on top of your previous ...

  • Lowrance electronic 10764001 - page 74

    72 | Utilities | Lowranc e HDS Gen2 T ouch Sun/moon Displays sunrise, sunset, moonrise and moonset for a position based on entered date and the position ’ s latitude/long itude. T rip Calcula tor T rip 1 / T rip 2 Displays voyage and eng ine information, with reset option f or all data fields. To d a y Displays voyage inf ormation for the curren ...

  • Lowrance electronic 10764001 - page 75

    | 73 Utilities | Lowranc e HDS Gen2 T ouch T ides Displays tide information f or the tide station nearest to y our vessel. T ap the arrow panel buttons to change date , or tap the date field to access the calender function. Available tide stations can be selected from the menu . Satellites Status page for active satellites . W AAS (and EGNOS) di? ...

  • Lowrance electronic 10764001 - page 76

    74 | Utilities | Lowranc e HDS Gen2 T ouch Cop ying les to SD card Y ou can copy screenshots and logs to a SD card . Y ou can also export system settings and waypoints, r outes and trails to a SD car d. Ex- por ting files is covered in the Maintenance section. Copying all les Settings Opens the system settings menu. ...

  • Lowrance electronic 10764001 - page 77

    | 75 System Settings | L owrance HDS Gen2 T ouch S y stem Settings Changing sy stem settings The system settings pro vides access to advanced settings for y our system and determines the way your system displa ys various user inter face information on the display . Language Controls the language used on this unit f or pages, menus and dialogs. Chan ...

  • Lowrance electronic 10764001 - page 78

    76 | System Settings | L owrance HDS Gen2 T ouch Coor dinate sy stem Defines the coordinate system used when position coor dinates are entered and display ed. Magnetic variation Magnetic variation is the difference between true bearings and magnetic bearings, caused by diff erent location of the Geographic and the Magnetic nor th poles. Any loca ...

  • Lowrance electronic 10764001 - page 79

    | 77 Simulator | Lowr ance HDS Gen2 T ouch Using the simula tor Simulator mode The simulation featur e will let you see how the unit works in a stationar y position and without being connected to the sonar , GPS, radar , etc . Y ou can use the simulator to help you become familiar with your unit befor e using it out on the water . When the simulato ...

  • Lowrance electronic 10764001 - page 80

    78 | Simulator | Lowr ance HDS Gen2 T ouch Adv anced simula tor settings The advanced simulator settings allow you t o define how to run the simulator . When the settings are sa ved these will be used as default when star ting the simulator mode. GPS source Selects the source where simulated GPS data is generated . Speed, Course and Rout e Used to ...

  • Lowrance electronic 10764001 - page 81

    | 79 Radar | Lowrance HDS Gen2 T ouch Using the r adar (optional) The radar page can be set up as a full screen view or combined with other pages. The radar image can also be displayed as an ov erlay to existing 2D char t views and 3D for Navionics . Refer to “Char t overlay ” on page “Char t overlay ” on page 26. ¼ Note: Radar overla y re ...

  • Lowrance electronic 10764001 - page 82

    80 | Radar | Lowrance HDS Gen2 T ouch Adjusting r ange Y ou can use the zoom keys on the touchscreen or the dedicated zoom keys on the front of the unit to adjust the radar range. Using the cursor on the r adar page The cursor is by default not shown on the radar image. When you tap the radar page the cursor and the cursor position window will be a ...

  • Lowrance electronic 10764001 - page 83

    | 81 Radar | Lowrance HDS Gen2 T ouch Measuring range and bearing to a tar get Range rings The range rings are displayed at pr eset distances from the vessel based on the radar range. Y ou can use the range ring to estimate the distance to a radar echo. Radar menu When the cursor is active, some featur es on the radar menu will be replaced with cur ...

  • Lowrance electronic 10764001 - page 84

    82 | Radar | Lowrance HDS Gen2 T ouch Rain Clutter Rain clutter is used to reduce the effect of rain, snow or other weather conditions on the radar image. Adjust the value by vertically dragging the rain clutter slide bar . The value should not be increased too much as this ma y filter out real targets . Interference rejection Inter ference could ...

  • Lowrance electronic 10764001 - page 85

    | 83 Radar | Lowrance HDS Gen2 T ouch Cent er Look ahead Cust om oset 1. Selec t the off set option f rom the menu 2. T ap the screen where you want to position the radar center 3. Confirm the s et ting by tapping S ave off set o n the menu. Symbology Radar symbology can be turned ON/OFF collec tively from the Radar menu, or individually as de ...

  • Lowrance electronic 10764001 - page 86

    84 | Radar | Lowrance HDS Gen2 T ouch Dening an EBL/VRM marker 1. Ensur e that the cursor is not ac tive on the ra dar page 2. T ap EBL/ VRM on th e radar menu 3. S elec t an EBL / VRM . 4. T ap adjust to selec t EBL / V RM position 5. Drag the EBL / VR M into the desir ed lo cation 6. T ap Save E BL / VRM Quick EBL/VRM marker positioning by usi ...

  • Lowrance electronic 10764001 - page 87

    | 85 Radar | Lowrance HDS Gen2 T ouch Dening a guard zone 1. T ap Guard Zone on the ra dar menu 2. T ap one of the guard zones 3. Ta p Adjust and t ap and drag on the s creen to position the guard zon e 4. S ave the position by tapping S ave guar d zone on the menu. Sensitivity The guard zone sensitivity can be adjusted to eliminat e alarms for ...

  • Lowrance electronic 10764001 - page 88

    86 | Radar | Lowrance HDS Gen2 T ouch ST C curve The ST C (Sensitivity Time Control) contr ols the sensitivity of the radar signal close to your v essel. Y our selection should be based on the current sea conditions. ¼ Note: W hen a 4G broadband radar i s installed, bea m sharpeni ng is enabled, re sulti ng in 2X the azimuth r esolution — s imil ...

  • Lowrance electronic 10764001 - page 89

    | 87 Radar | Lowrance HDS Gen2 T ouch Threshold The threshold sets r equired signal str ength for the low est radar signals. Radar returns below this limit will be filter ed and not displayed. The default value is 30%. F ast scan (Broadband Radar™ only). Increases the rotation speed of the radar scanner when the range is under 2nm. This option g ...

  • Lowrance electronic 10764001 - page 90

    88 | Radar | Lowrance HDS Gen2 T ouch MARP A target symbols Y our unit uses the target symbols shown below . Symbol Description Acquiring MARP A target. Typically it takes up to 10 full r otations of the scanner T racking MARP A target, not moving or at anchor . T racking and safe MARP A target with extension lines . Dangerous MARP A tar get. A tar ...

  • Lowrance electronic 10764001 - page 91

    | 89 Radar | Lowrance HDS Gen2 T ouch V iewing target inf ormation T ap the desired target and then tap T arget details on the radar menu. MARP A target settings Several vessel settings define alarm limits and how the targets are displayed on your radar image . T arget trails and safe rings Y ou can define the length of the MARP A trail mak ing i ...

  • Lowrance electronic 10764001 - page 92

    90 | Radar | Lowrance HDS Gen2 T ouch your vessel comes within this distance from a v essel, the symbol will change to the “ dangerous” target symbol. An alarm will be triggered if activated in the Alarm settings panel. V essel alarm settings Y ou can define several V essels alarms to alert you if a target comes within predefined range limits ...

  • Lowrance electronic 10764001 - page 93

    | 91 Radar | Lowrance HDS Gen2 T ouch Radar installation menu Setup and configuration of the Broadband radar has been simplified compared to traditional pulse radars . Ther e is no zero range (time delay), no warm up time, and no burn-in required . Radar status Displays scanner information, the availability and status of scanner featur es, and th ...

  • Lowrance electronic 10764001 - page 94

    92 | Radar | Lowrance HDS Gen2 T ouch Occasionally false target returns can occur adjacent to strong tar get returns such as large boats or container ports. This occurs because not all of the transmitted radar energy can be f ocused into a single beam by the radar antenna, a small amount energy is transmitt ed in other directions. This energy is re ...

  • Lowrance electronic 10764001 - page 95

    | 93 AIS | Lowranc e HDS Gen2 T ouch Using AIS The marine Automatic Identification System (AIS) is a location and vessel information r epor ting system. It allows vessels equipped with AIS to automatically and dynamically share and r egularly update their position, speed, course and other inf ormation such as vessel identity with similarly equippe ...

  • Lowrance electronic 10764001 - page 96

    94 | AIS | Lowranc e HDS Gen2 T ouch Lost AIS tar get. When no signals have been r eceived within a time limit a target will be defined as lost. The target symbol repr esents the last valid position of the target befor e the reception of data was lost. Selected AIS target, activated by tapping on a target symbol. The target will return to default ...

  • Lowrance electronic 10764001 - page 97

    | 95 AIS | Lowranc e HDS Gen2 T ouch V essel alarms Y ou can define several alarms to aler t you if a target comes within predefined range limits, or if a pr eviously identified target is lost. V es- sel alarms can be set up from the Alarms utility. Alarm ID Description Dangerous vessel Controls whether an alarm shall be activated when a vessel ...

  • Lowrance electronic 10764001 - page 98

    96 | AIS | Lowranc e HDS Gen2 T ouch Y our v essel’ s MMSI number Y ou need to have your own MMSI (Maritime Mobile Ser vice Identit y) number entered in the system t o be able to receiv e addressed mes- sages from AIS and DSC vessels . It is also impor tant to have the MMSI number entered to a void see- ing your own vessel as an AIS tar get on th ...

  • Lowrance electronic 10764001 - page 99

    PB | | 97 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Networ king Y ou can monitor the per formance of NMEA 2000 and Ethernet networks and configure data sources, network devices, waypoint sharing and NMEA 0183 settings. Aut o congur ation After you have installed y our NMEA 2000 network , or added/re- moved a de ...

  • Lowrance electronic 10764001 - page 100

    98 | | 99 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Conguring da ta sources Devices can be configured from the Data source menu or fr om the device list. Select the device from the list and tap Configure . Sco pe Y ou can selec t the Global or Local setting f or display units and data sources on the network. Se ...

  • Lowrance electronic 10764001 - page 101

    98 | | 99 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Device Global Local Display units Automatically uses data from global data sources When a data source is selected by other global scope units, all units switch to same data source Data sources must be selected manually . Data source selection will not be affected ...

  • Lowrance electronic 10764001 - page 102

    100 | | 101 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Device list T ap device list to view all devices connec ted to a NMEA 2000 network . Y ou can configure and calibrate (wher e applicable) devices shown on the device list. Calibra ting devices Devices that can be calibrated from the device list will have a Cali ...

  • Lowrance electronic 10764001 - page 103

    100 | | 101 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch NMEA 2000 T urns on/off sharing/receiving of waypoints acr oss a NMEA 2000 network . Y ou can also turn on back light sync, which allows all unit backlights to be adjusted from any display unit on the network. NMEA 0183 Used to configure the display unit t o s ...

  • Lowrance electronic 10764001 - page 104

    102 | | 103 Utilities | Lowranc e HDS Gen2 T ouch Utilities | Lowranc e HDS Gen2 T ouch F uel The fuel utility allows your unit to calculate and monitor the o verall fuel per formance of your vessel . The F uel utilit y requires a fuel used sensor , like a Lo wrance F uel F low sensor , an engine inter face with fuel used output capability, or a L ...

  • Lowrance electronic 10764001 - page 105

    102 | | 103 Utilities | Lowranc e HDS Gen2 T ouch Utilities | Lowranc e HDS Gen2 T ouch Calibration If you need to calibrate a tank, fill the tank , tap the Set to full checkbox, and proceed to tank calibration. If you add fuel, but do not fill the tank, you must enter the amount of fuel added to the tank to ensure the accuracy of fuel economy ca ...

  • Lowrance electronic 10764001 - page 106

    104 | W eather | Lowr ance HDS Gen2 T ouch SIRIUS™ w eather (North America only) When connected to a Navico W eather Module, you can subscribe and include SIRIUS™ audio and SIRIUS™ Marine W eather Service on your system (North America only). SIRIUS™ audio and weather service covers inland US waters and coastal areas into the Atlantic and P ...

  • Lowrance electronic 10764001 - page 107

    | 105 W eather | Lowr ance HDS Gen2 T ouch SST color bar Pr ecipitation color shading SST color shading Storm ic ons Wind bar bs City forec ast icon Showing detailed w eather inf ormation When you tap a shaded weather ar ea, available information will be shown in the cursor window . When you tap a weather icon, detailed inf ormation about the obser ...

  • Lowrance electronic 10764001 - page 108

    106 | W eather | Lowr ance HDS Gen2 T ouch Sea sur face temperatur e (SST ) Can be shown as color shading or text. When color coding is selected, the SST color bar will be shown on the left side of the display . Y ou can define which temperature range that shall be color coded as described later in this section. W a ve indica tion Colors are used ...

  • Lowrance electronic 10764001 - page 109

    | 107 W eather | Lowr ance HDS Gen2 T ouch Icon Description City forecast Sur face obser vation T ropical st orm track ing; past (grey) - pr esent (red) - future (y ellow) Hurricane (categor y 1-5) track ing; past (grey) - present (r ed) - future (yello w) T r opical disturbance/depression tracking; past (grey) - present (red) - futur e (yellow) St ...

  • Lowrance electronic 10764001 - page 110

    108 | W eather | Lowr ance HDS Gen2 T ouch A watchbox is defined by the National Weather Ser vice. When the alarm is turned on you will get an alarm if your vessel is inside or moves into a watchbo x. Access the Alarms utility to set up weather alarms. W eather repor ts Marine zone SIRIUS™ ser vice includes access to weather reports for all U .S ...

  • Lowrance electronic 10764001 - page 111

    | 109 W eather | Lowr ance HDS Gen2 T ouch Animating SIRIUS™ w eather gr aphics This unit recor ds the weather information you ha ve turned on, and this information can be used to animate past or futur e weather con- ditions. The amount of information available in the system depends on the amount of weather activity,- the mor e complex it is the ...

  • Lowrance electronic 10764001 - page 112

    110 | Audio | Lo wrance HDS Gen2 T ouch A udio When this unit is connected to a SonicHub ser ver you can use your unit to control audio playback fr om iP od, iPhone , USB mass storage device (mp3) and AM/FM radio . Bef ore playing F M radio through the SonicHub, you must pur chase a marine -grade AM/FM antenna. When connected to a L WX Satellite mo ...

  • Lowrance electronic 10764001 - page 113

    | 111 Audio | Lo wrance HDS Gen2 T ouch Adjust volume Select audio sourc e Pause audio Next track Pr evious track Acc ess device native menu Mute audio iPod , iPhone , USB SIRIUS, AM/FM Select audio sourc e Adjust volume Next favorite station Pr evious favorit e station T une forward T une backwar d Mute audio Operating the audio sour ce Selec ting ...

  • Lowrance electronic 10764001 - page 114

    112 | Audio | Lo wrance HDS Gen2 T ouch Shue and repeat Shuffle and repeat are turned on/off fr om the audio menu. The icons will be blue when the function is turned on. The pla yback menu The playback menus includes an option giving access to the source ’ s native menu or file structure, used f or selecting tracks. Using the F M/AM r adio S ...

  • Lowrance electronic 10764001 - page 115

    | 113 Audio | Lo wrance HDS Gen2 T ouch Saving a channel to the fav orite list When the channel is tuned in, you can add the stations to your fav orite list. All favorite channels can be viewed , selected and deleted from within this list. Using SIRIUS r adio The channels list The channels list displays all available SIRIUS channels , whether or no ...

  • Lowrance electronic 10764001 - page 116

    114 | Audio | Lo wrance HDS Gen2 T ouch Locking channels Y ou can lock selec ted SIRIUS channels from being br oadcast unless an unlock code is entered . When the function is activated, a 4 digit code must be entered befor e the locking is ac tivated. The same code must be entered bef ore a locked channel can be released. Mixer Y ou can mak e adjus ...

  • Lowrance electronic 10764001 - page 117

    | 115 Maintenance | Lo wrance HDS Gen2 T ouch Maintenanc e Pre v entiv e maintenanc e The unit does not contain any field serviceable components, there- for e the operator is requir ed to per form only a very limited amount of preventative maint enance. It is recommended that you always fit the supplied protective sun cover when the unit is not i ...

  • Lowrance electronic 10764001 - page 118

    116 | Maintenance | Lo wrance HDS Gen2 T ouch Sof tware upgrades The latest software for this unit will be available f or download fr om our web site; www .lowrance.com Detailed instructions for how to install the software will follow the upgrade files. F or more details about software upgrades , ref er to the separate Installation manual. T roubl ...

  • Lowrance electronic 10764001 - page 119

    | 117 Maintenance | Lo wrance HDS Gen2 T ouch The example shows how to export waypoints, rout es and trails. 1. Acc ess the Files utilit y 2. Ta p Wa ypoints, Routes and T rails database 3. Ta p Expor t 4. S elec t the d esired file format 5. Selec t des tination folder 6. Enter a name for exp or ted file 7. Ta p Enter ¼ Note: T o expor t waypoi ...

  • Lowrance electronic 10764001 - page 120

    118 | | 119 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch A AIS Dangerous vessels 96 Extension lines 96 F iltering targets 96 MMSI number 96 Selecting targets 94 T arget information 94 T arget symbols 93 V essel alarms 95 Alarms Acknowledge 70 Multiple 69 Set limits 68 Single 69 Audio 110 Audio bar 110 Audio contr ols 111 Enab ...

  • Lowrance electronic 10764001 - page 121

    118 | | 119 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch F ishing modes 50 F ish ’ n Chip 29 F uel F ind fuel 103 F uel used 103 V essel setup 102 G Guard zones 84 I Instrument panels Customizing 65 Dashboards 65 Editing 66 K Keel oset 51 Key beeps 75 L Language 75 Log sonar 44 Loran 38 Settings 38 M Magnetic variation 7 ...

  • Lowrance electronic 10764001 - page 122

    120 | | 121 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch Bearing alignment 91 Bearings 87 Compass 87 Dangerous vessels 89 EBL/VRM 83 F ast scan 87 Gain 81 Guard Zones 84 Inter ferenc e rejection 82 MARP A 87 Operation modes 79 Orientation 86 Overlay 90 P alette 86 Position 82 Rain clutter 82 Range 80 Range markers 87 Range ri ...

  • Lowrance electronic 10764001 - page 123

    120 | | 121 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch StructureScan Contrast 57 Cursor 54 Flip left/right 57 F requency 56 Histor y preview 55 Logging 57 Measuring 58 Networking 58 Noise Rejection 56 P alette 57 P ausing sonar 58 Range 56 Range lines 57 Saving a waypoint 55 Settings 58 Stop sonar 58 Sur face clarity 56 Vie ...

  • Lowrance electronic 10764001 - page 124

    Navico Databases License A greement THIS IS A LEGAL AGREEMENT B E T WEEN T HE END -USER WHO FIRST PURCHA SES THIS PROD UC T AS A CONSUMER ITEM FO R PERSONAL, FAMIL Y , OR HOUSEHOLD USE ("YOU") AND NAVICO , THE MANUF ACT URER OF T HIS PRODUC T ( " WE" , "OUR" , OR "US"). U SING THE PROD UC T AC C OMP ANIED B Y ...

  • Lowrance electronic 10764001 - page 125

    Databases Limited Warran ty “ We” , “our ” , or “ us” refers to Navico, the m anuf ac turer of t his produc t . “ Y ou” or “your ” refer s to the firs t pe rson w ho purchas es the p roduc t as a consum er item for pe rson al, famil y , or hous ehol d use. Th e Databas es Limite d Warrant y ap plies to the one o r more data bas ...

  • Lowrance electronic 10764001 - page 126

    ...

  • Lowrance electronic 10764001 - page 127

    *988-10312-001* ...

Manufacturer Lowrance electronic Category Fish Finder

Documents that we receive from a manufacturer of a Lowrance electronic 10764001 can be divided into several groups. They are, among others:
- Lowrance electronic technical drawings
- 10764001 manuals
- Lowrance electronic product data sheets
- information booklets
- or energy labels Lowrance electronic 10764001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lowrance electronic 10764001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lowrance electronic 10764001, service manual, brief instructions and user manuals Lowrance electronic 10764001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lowrance electronic 10764001.

A complete manual for the device Lowrance electronic 10764001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lowrance electronic 10764001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lowrance electronic 10764001.

A complete Lowrance electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lowrance electronic 10764001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lowrance electronic 10764001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lowrance electronic 10764001, that we can find in the current document
3. Tips how to use the basic functions of the device Lowrance electronic 10764001 - which should help us in our first steps of using Lowrance electronic 10764001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lowrance electronic 10764001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lowrance electronic 10764001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lowrance electronic 10764001?

Use the form below

If you did not solve your problem by using a manual Lowrance electronic 10764001, ask a question using the form below. If a user had a similar problem with Lowrance electronic 10764001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)