English dropdown-ico

Manual Canon LV-7320U

40 pages 0.61 mb
Download

Go to site of 40

Summary
  • Canon LV-7320U - page 1

    E English Multimedia Pr ojector Owner’ s Manual L V -7320U ...

  • Canon LV-7320U - page 2

    2 INFORMA TION T O THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and ...

  • Canon LV-7320U - page 3

    3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments no ...

  • Canon LV-7320U - page 4

    4 T ABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation. ● Each name of corporations or products ...

  • Canon LV-7320U - page 5

    5 FEA TURES AND DESIGN This projector comes with the parts listed below. Check to make sure all are included. If any parts are missing, contact to a sales dealer. ● Owner's Manual. ● AC Power Cord. ● Wireless Remote Control Unit. ● Batteries for Remote Control Unit. ● VGA Cable. ● Control Cable for PS/2 Port. ● Lens Cover and Str ...

  • Canon LV-7320U - page 6

    6 PREP ARA TION NAME OF EA CH P AR T OF THE PR OJECT OR These Air Intake Vents should not be blocked. BO TT OM OF THE CABINET B ACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, the following attention should be taken. ● Do not put a flammable object near this vent. ...

  • Canon LV-7320U - page 7

    7 PREP ARA TION ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 10 degrees. Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector. 1 ADJUSTABLE FEET SETTING-UP THE PR OJECT OR FEET LOCK LATCHES Release the FEET LOCK LATCHE ...

  • Canon LV-7320U - page 8

    8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least 3 feet (1m) away from any object. ● Keep sides clear of any obstructions. Obstructions may block cooling air. This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possibl ...

  • Canon LV-7320U - page 9

    9 PREP ARA TION CA UTION IN CARR YING OR TRANSPOR TING THE PR OJECT OR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When transporting the projector, use a carrying case recommended by Canon. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This ma ...

  • Canon LV-7320U - page 10

    10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output to this terminal. (Refer to P12, 13.) When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. (R ...

  • Canon LV-7320U - page 11

    S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT 11 CONNECTING THE PR OJECT OR CONNECTING T O THE VIDEO EQ UIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) External Audio Equipment Audio Cable (Stereo) ✽ Termina ...

  • Canon LV-7320U - page 12

    12 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTING T O THE COMPUTER To connect to the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control Cable for Serial Port ✽ Control Cable ...

  • Canon LV-7320U - page 13

    13 CONNECTING THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL POR T COMPUTER IN MONIT OR OUT ON 1 DIP ON OFF 23456 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 34 5 6 OFF OFF ON ON ON ON 21" MODE (1152 x 870) CONTROL POR ...

  • Canon LV-7320U - page 14

    14 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTR OL V OLUME PO WER FOCUS ZOOM VIDEO COMPUTER D.ZOOM MENU MUTE LASER KEY ST ONE NO SHO W FREEZE A UTO IMA GE NORMAL ON ALL OFF ALL-OFF SWITCH When using the Remote Control Unit, turn this switch to “ON” and turn it “ALL OFF” when it is not used. This remote control emits a laser beam as the ...

  • Canon LV-7320U - page 15

    15 BEFORE OPERA TION V OLUME PO WER FOCUS ZOOM VIDEO COMPUTER D.ZOOM MENU MUTE LASER KEY ST ONE NO SHO W FREEZE A UTO IMA GE NORMAL To insure safe operation, please observe the following precautions : ● Use (2) AA type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid conta ...

  • Canon LV-7320U - page 16

    PO WER NORMAL MENU MODE A UTO IMA GE FOCUS ZOOM V OLUME KEYST ONE LAMP REPLA CE W ARNING TEMP . READ Y LAMP WIDE TELE SELECT BRIGHT 16 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to open or close the MENU operation. (P17, 18) MENU BUTTON AUTO IMAGE BUTTON READY INDICATOR POWER ON–OFF BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR LAMP R ...

  • Canon LV-7320U - page 17

    17 SELECT BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by ...

  • Canon LV-7320U - page 18

    18 BEFORE OPERA TION MENU B AR IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P26) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P24, 25) SETTING MENU Used to set the Display Menu and to reset Lamp Replacement Monitor Timer. (R ...

  • Canon LV-7320U - page 19

    19 B ASIC OPERA TIONS TURNING ON THE PR OJECT OR Connect the projector's AC power cord into a wall outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP POWER indicator dims, and the Cooling Fans start to operate. The Preparati ...

  • Canon LV-7320U - page 20

    20 B ASIC OPERA TION ADJUSTING THE IMA GE The message disappears after 4 seconds. The message disappears after 4 seconds. ZOOM ADJUSTMENT 1 Press the ZOOM WIDE/TELE button(s) on the Top Control or the ZOOM ▲ / ▼ button on the Remote Control Unit to turn into the ZOOM mode. 2 Press the ZOOM WIDE button or the ZOOM ▲ button to make the image la ...

  • Canon LV-7320U - page 21

    21 B ASIC OPERA TION Press the VOLUME button on the Top Control or the VOLUME (+/–) button on the Remote Control Unit to adjust the volume. The Volume dialog box appears on the screen for a few seconds. The POINT UP or VOLUME (+) button increase the volume, and the POINT DOWN or the VOLUME (–) button decrease the volume. Press the MUTE button o ...

  • Canon LV-7320U - page 22

    22 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE MENU OPERA TION When selecting the Computer Mode, the Current Mode display appears. It shows the information of the computer of the mode selected. CURRENT MODE DISPLAY ...

  • Canon LV-7320U - page 23

    23 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 ...

  • Canon LV-7320U - page 24

    24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector. If this happens, the projector cannot reproduce ...

  • Canon LV-7320U - page 25

    25 COMPUTER MODE The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total lines Recalls the parameter data that was previously adjusted. Reset Stores the parameters in the memory. Stored Clears the parameter data previously set . Mode free Closes the PC ADJUST Menu. Quit The number of the total d ...

  • Canon LV-7320U - page 26

    26 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to c ...

  • Canon LV-7320U - page 27

    27 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. Move the arrow to ...

  • Canon LV-7320U - page 28

    28 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. To ad ...

  • Canon LV-7320U - page 29

    29 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE MENU OPERA TION SELECTING COLOR SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. ...

  • Canon LV-7320U - page 30

    30 Each of the keys operates as follow. VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the ar ...

  • Canon LV-7320U - page 31

    31 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT butt ...

  • Canon LV-7320U - page 32

    32 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control Unit is not only able to operate the projector but also can be used as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is available only when PC mouse pointer is dis ...

  • Canon LV-7320U - page 33

    33 APPENDIX CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you are not using the projector, replace the lens cover. 1 3 Lightly wipe the cleaning cloth over the lens. 2 ...

  • Canon LV-7320U - page 34

    34 APPENDIX LAMP REPLA CEMENT INDICA T OR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights red. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least 45 ...

  • Canon LV-7320U - page 35

    35 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable connection. Verify that all computer, video and power cord a ...

  • Canon LV-7320U - page 36

    36 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Remote Control Unit does not work. ● Check the batteries. ● Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”. ● Make sure nothing is between the Remote Receiver and the Remote Control Unit. ● Make sure you ar ...

  • Canon LV-7320U - page 37

    37 APPENDIX 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 9.26 lbs (4.2 kg) 9.45" x 3.66" x 13.23" (240mm x 93mm x 336mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz ...

  • Canon LV-7320U - page 38

    38 APPENDIX OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : LV - CA26 ● Control Cable for ADB Port Type No. : LV - CA27 ● MAC Adapter Type No. : LV - AD02 ● Canon Digitizer Type No. : LV - DP10 ...

  • Canon LV-7320U - page 39

    ...

  • Canon LV-7320U - page 40

    1AA6P1P2169-- (MB6P) ©CANON INC . 2000 YT1-1312-000 PRINTED IN JAP AN CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U .S.A., INC. NEW Y ORK OFFICE One Canon Plaza, Lake Success , NY 11042-1198, U .S .A. phone : 516-328-5960 CANON U .S.A., INC. LOS ANGELES OFFICE 15955 Alton P ar kwa y , ir vine, CA 92718-3616, U .S.A ...

Manufacturer Canon Category Projector

Documents that we receive from a manufacturer of a Canon LV-7320U can be divided into several groups. They are, among others:
- Canon technical drawings
- LV-7320U manuals
- Canon product data sheets
- information booklets
- or energy labels Canon LV-7320U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon LV-7320U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon LV-7320U, service manual, brief instructions and user manuals Canon LV-7320U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon LV-7320U.

Similar manuals

A complete manual for the device Canon LV-7320U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon LV-7320U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon LV-7320U.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon LV-7320U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon LV-7320U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon LV-7320U, that we can find in the current document
3. Tips how to use the basic functions of the device Canon LV-7320U - which should help us in our first steps of using Canon LV-7320U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon LV-7320U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon LV-7320U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon LV-7320U?

Use the form below

If you did not solve your problem by using a manual Canon LV-7320U, ask a question using the form below. If a user had a similar problem with Canon LV-7320U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)