English dropdown-ico

Manual Harbor Freight Tools 95641

17 pages 1.18 mb
Download

Go to site of 17

Summary
  • Harbor Freight Tools 95641 - page 1

    RADIO CONTROLLED ELECTRIC RACING BOA T Model 95641 ASSEMBL Y AND OPERA TION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools. 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com T O PREVENT ...

  • Harbor Freight Tools 95641 - page 2

    Page 2 SKU 95641 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Boat Battery 7.2 V , 1800 mAh, NiMH Charger Input: 120 V~, Output: 9 VDC T ransmitter Batteries Required 8 “AA” batteries (sold separately) Radio Control Frequencies 26.995 MHz, 27.045 MHz, 27.095 MHz, 27.125 MHz, 27.145 MHz, 27.175 MHz Control Range up to 400 ...

  • Harbor Freight Tools 95641 - page 3

    Page 3 SKU 95641 For technical questions, please call 1-800-444-3353. grounding prong or modify the plug in any way . Do not use any adapter plugs. Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance pat ...

  • Harbor Freight Tools 95641 - page 4

    Page 4 SKU 95641 For technical questions, please call 1-800-444-3353. PRODUCT USE AND CARE Do not use the R/C Electric Racing Boat if the Power Switch does not turn it 1. on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. Disconnect the Power Cord Plug from the power source before making any 2. ad ...

  • Harbor Freight Tools 95641 - page 5

    Page 5 SKU 95641 For technical questions, please call 1-800-444-3353. If two Boats with the same radio frequency are used (both with the same 4. numbers on the T ransmitter and/or Receiver), they must be at least 1640’ away from one another in order to maintain adequate transmission control. Before using in the water perform a distance check to b ...

  • Harbor Freight Tools 95641 - page 6

    Page 6 SKU 95641 For technical questions, please call 1-800-444-3353. let the T win 380 Motors (8A and 8B) as well as both Drive Shafts (6B and 6C) cool at least 15 minutes before touching. Do not recharge the Battery Pack (16) if it is hot. 15. GROUNDING W ARNING! Improp erly connec ting the groun ding wire can resul t in the risk of electric shoc ...

  • Harbor Freight Tools 95641 - page 7

    Page 7 SKU 95641 For technical questions, please call 1-800-444-3353. DOUBLE INSULA TED T OOLS: TOOLS WITH TWO PRONG PLUGS Note: The Charger included with this R/C Electronic Racing Boat has a 2-Pronged plug. T ools marked “Double Insulated” do not require grounding. They have a special 1. double insulation system which satises OSHA requirem ...

  • Harbor Freight Tools 95641 - page 8

    Page 8 SKU 95641 For technical questions, please call 1-800-444-3353. Symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. V~ V olts Alternating Current A Amperes n 0 xxxx/min. No Load Revolutions per Minute (RPM) UNP ACKING When unpacking, check to make sure that the item is intact and undamaged. If any parts a ...

  • Harbor Freight Tools 95641 - page 9

    Page 9 SKU 95641 For technical questions, please call 1-800-444-3353. 3. Remove the Deck Cabin (1) by twisting the two Buttons at the back of the Deck Cabin (1) to OPEN. This will expose the Battery Compartment. See Figure 1. Note: There is another Button for locking and unlocking the Deck Cabin (1) and it is located on the front section of the Dec ...

  • Harbor Freight Tools 95641 - page 10

    Page 10 SKU 95641 For technical questions, please call 1-800-444-3353. Note: The Rechargeable Battery should be charged fully before its rst use in order to get maximum run-time for your R/C Electric Racing Boat. See Charging Instruc- tions on page 10. After fully charging the Battery Pack (16) replace it into the Battery Compartment 5. and plug ...

  • Harbor Freight Tools 95641 - page 11

    Page 1 1 SKU 95641 For technical questions, please call 1-800-444-3353. REV 07e OPERA TION INSTRUCTIONS USING THE TRANSMITTER T O STEER Note: See Figure 3 for T ransmitter (20) layout. When you push the Throttle Lever on the Transmitter (20) forward, the T win Pro - 1. pellers will rotate at the same time and speed pushing the Racing Boat forward. ...

  • Harbor Freight Tools 95641 - page 12

    Page 12 SKU 95641 For technical questions, please call 1-800-444-3353. Crystal: e. This shows the channel you are transmitting on. Y ou can order crystals in different channels in order to race with other boats without transmission interfer- ence. Steering Lever: f. Used to turn R/C Electric Racing Boat to the left or right. Steering T rim: g. Used ...

  • Harbor Freight Tools 95641 - page 13

    Page 13 SKU 95641 For technical questions, please call 1-800-444-3353. INSPECTION, MAINTENANCE, AND CLEANING W ARNING! Make sure the Power Switch of the R/C Electric Racing Boat is in its “OFF” position and it is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. BEFORE EACH USE, 1. inspe ...

  • Harbor Freight Tools 95641 - page 14

    Page 14 SKU 95641 For technical questions, please call 1-800-444-3353. Problem Possible Causes Probable Solutions R/C Electric Racing Boat moves or turns without any commands from your transmitter . Low T ransmitter Batteries. 1. Someone else is operating a Radio 2. Controlled device in the area. Change the old 8-AA Batteries in 1. T ransmitter (20 ...

  • Harbor Freight Tools 95641 - page 15

    Page 15 SKU 95641 For technical questions, please call 1-800-444-3353. P ARTS LIST Part Description Q’ty 1 Deck Cabin 1 2 Hull 1 3 Antenna T ube 1 4 Shaft Strut 2 4A/4B Left and Right Propellers 1 ea 5 Shaft Housing 2 6A/6B Left and Right Drive Shafts 1 ea 6C Shaft Coupling 1 7A Motor Shaft Adaptor 1 7B/7C Left and Right Motor Fans 1 ea 8A/8B Lef ...

  • Harbor Freight Tools 95641 - page 16

    Page 16 SKU 95641 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts. 4 4 07g ...

  • Harbor Freight Tools 95641 - page 17

    Page 17 SKU 95641 For technical questions, please call 1-800-444-3353. INTERIOR OF CABIN LA YOUT T win 380 Motors T win Propeller Shafts Battery Pack (16) Electric Speed Controller (18) ...

Manufacturer Harbor Freight Tools Category Musical Toy Instrument

Documents that we receive from a manufacturer of a Harbor Freight Tools 95641 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 95641 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 95641
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 95641.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 95641, service manual, brief instructions and user manuals Harbor Freight Tools 95641. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 95641.

Similar manuals

A complete manual for the device Harbor Freight Tools 95641, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 95641 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 95641.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 95641 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 95641, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 95641, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 95641 - which should help us in our first steps of using Harbor Freight Tools 95641
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 95641
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 95641 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 95641?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 95641, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 95641 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)