Manual Samsung SPE-400B

88 pages Not applicable
Download

Go to site of 88

Summary
  • Samsung SPE-400B - page 1

    4CH NETWORK ENCODER (BLADE TYPE) User Manual SPE-400B ...

  • Samsung SPE-400B - page 2

    Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall ...

  • Samsung SPE-400B - page 3

    English _3 ● OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. Do not install near any heat sources ...

  • Samsung SPE-400B - page 4

    overview 4_ overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be plac ...

  • Samsung SPE-400B - page 5

    English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. It is essential that when changing the battery in the uni ...

  • Samsung SPE-400B - page 6

    overview 6_ overview Please read the following recommend safety precautions carefully. Do not Place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near conductive material. Do not attempt to service this apparatus yoursel ...

  • Samsung SPE-400B - page 7

    English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Features 9 Recomended PC Specifi cations 10 What’s Included 11 At a Glance 14 Checking IP INSTALLATION & CONNECTION 15 15 Installation 16 Connecting with other Device NETWORK CONNECTION AND SETUP 19 19 Connecting the Network Encoder Directly to Local Area N ...

  • Samsung SPE-400B - page 8

    overview 8_ overview SETUP SCREEN 39 39 Setup 39 Video Setup 42 Network Setup 47 Event Setup 53 System Setup APPENDIX 58 58 Specifi cation 60 Product Overview 61 Troubleshooting 62 Open Source Announcement 64 GPL/LGPL Software License WEB VIEWER 32 32 Connecting to the Network encoder 33 Login 34 Installing Silverlight Runtime 36 Using the Live Sc ...

  • Samsung SPE-400B - page 9

    English _9 ● OVERVIEW PRODUCT FEATURES Multi-Streaming This network encoder can display videos in different resolutions and qualities simultaneously using different CODECs. M However, MPEG-4 video can not be played on a web page. Use CMS software if you want to play the video on a web page.  Support various communication protocols Web Browser- ...

  • Samsung SPE-400B - page 10

    overview 10_ overview WHAT’S INCLUDED Please check if your network encoder and accessories are all included in the product package. Appearance Item Name Quantity Description User Manual, Installer S/W CD 1 CMS S/W DVD 1 Quick Guide 1 Terminal Block 1 Used for RS-485 or alarm cable connection. ASSY-Tapping Screw 2 Used to fix Blade (SPE-400B) with ...

  • Samsung SPE-400B - page 11

    English _11 ● OVERVIEW AT A GLANCE SPE-1600R Front Side SPE-1600R Rear Side SPE-1600R is sold separately (unbundled). M    108&3         /&5803,   108&3         /&5803, &5)&3/&5 & ...

  • Samsung SPE-400B - page 12

    overview 12_ overview Item Description  Network connection indicator for each channel, Power and Network Indicator 1~16 Channels connected to the network will blink the green indicator with the network connection status. NETWORK When network connection is made, it blinks in a different color according to the connection status. Green : Blinks in ...

  • Samsung SPE-400B - page 13

    English _13 ● OVERVIEW Blade (SPE-400B) Item Description  VIDEO IN (CH 1~CH 4) Used to connect the BNC video input signal. b I/O Port D+ (1~4) RS-485 Data Line D- (1~4) RS-485 Data Line ALARM IN (1~4) Alarm Input (sensor) Port G GND ALARM OUT (1~4) Alarm Out Port c Reset Button Resets the network encoder settings to the default. Press and hold ...

  • Samsung SPE-400B - page 14

    overview 14_ overview CHECKING IP By factory default, the IP of each Blade (SPE-400B) is set to “192.168.1.100~103”. If you use IP INSTALLER to check the IPs after inserting all 4 Blades (SPE-400B), you may encounter a redundant IP. If this is the case, use IP INSTALLER to change the IP manually, or press and hold the < RESET > button on ...

  • Samsung SPE-400B - page 15

    English _15 ● INSTALLATION & CONNECTION installation & connection INSTALLATION To install Blade (SPE-400B) Loosen the screws on either side of the cover in the Blade (SPE-400B) compartment for SPE-1600R. Fit Blade (SPE-400B) into both sliding lines as shown and insert it in the arrow direction. Insert the Blade (SPE-400B) until it fi ts ...

  • Samsung SPE-400B - page 16

    installation & connection 16_ installation & connection CONNECTING WITH OTHER DEVICE SPE-1600R is sold separately (unbundled). Connecting the camera Connect the [ VIDEO IN ] port of the network encoder to the video output port of the camera. Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply ...

  • Samsung SPE-400B - page 17

    English _17 ● INSTALLATION & CONNECTION Connecting RS-485 and Alarm In/Out ports Connect RS-485 and Alarm I/O cables to the appropriate I/O ports on the rear panel. Port Description Port Description D+(1~4) RS-485 Data Line D-(1~4) RS-485 Data Line ALARM IN (1~4) Alarm Input (sensor) Port ALARM OUT (1~4) Alarm Out G GND Connecting to the RS-4 ...

  • Samsung SPE-400B - page 18

    installation & connection 18_ installation & connection Connecting ALARM OUT The alarm output system is a type of open collector that is designed to use an external relay. The rated maximum value is DC +24V, 100mA. Alarm I/O Wiring Diagram For controlling the power with electrical contacts, a separate circuit is required. Add an external re ...

  • Samsung SPE-400B - page 19

    English _19 ● NETWORK CONNECTION AND SETUP You can set up the network settings according to your network configurations. CONNECTING THE NETWORK ENCODER DIRECTLY TO LOCAL AREA NETWORKING Connecting to the network encoder from a local PC in the LAN Launch an Internet browser on the local PC. Enter the IP address of the network encoder in the addres ...

  • Samsung SPE-400B - page 20

    20_ network connection and setup network connection and setup CONNECTING THE NETWORK ENCODER DIRECTLY TO A DHCP BASED DSL/CABLE MODEM Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the network encoder so that you can use the web browser on your desktop to connect to the In ...

  • Samsung SPE-400B - page 21

    English _21 ● NETWORK CONNECTION AND SETUP CONNECTING THE NETWORK ENCODER DIRECTLY TO A PPPoE MODEM Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the network encoder so that you can use the web browser on your desktop to connect to the Internet. Use the Internet browser ...

  • Samsung SPE-400B - page 22

    22_ network connection and setup network connection and setup CONNECTING THE NETWORK ENCODER TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local P ...

  • Samsung SPE-400B - page 23

    English _23 ● NETWORK CONNECTION AND SETUP BUTTONS USED IN IP INSTALLER Item Description  Device Name Model name of the connected network encoder. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias Displays the name of the connected device. (Page 53) However, if the device nam ...

  • Samsung SPE-400B - page 24

    24_ network connection and setup network connection and setup Item Description  URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the network encoder if DDNS registration has failed.  IPv4 Scans for network encoders with the IPv4 setting.  IPv6 Scans for network ...

  • Samsung SPE-400B - page 25

    English _25 ● NETWORK CONNECTION AND SETUP In the < Address > pane, provide the necessary information. MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable network encoder will be set auto- matically so you don't need to input it manually. If using a Broadband Router IP Address : Enter an address falling in the IP rang ...

  • Samsung SPE-400B - page 26

    26_ network connection and setup network connection and setup Click [ OK ]. Manual network setup will be completed. If the Broadband Router has more than one network encoder connected Configure the IP related settings and the Port related settings distinctly with each other. ex) Category IP related settings Port related settings IP Address / Subnet ...

  • Samsung SPE-400B - page 27

    English _27 ● NETWORK CONNECTION AND SETUP Auto Network Setup Run < IP Installer_vX.XX.exe> to display the network encoder search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. Use the IP Installer in version 2.00 or later. For network encoders found with the IPv6 setting, these buttons will be grayed ...

  • Samsung SPE-400B - page 28

    28_ network connection and setup network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup Example of the Dynamic IP environment If a Broadband Router, with network encoders connected, is assigned an IP ad- dress by the DHCP server If connecting the network encoder directly to modem using the DHCP protocols If IPs are assigned by t ...

  • Samsung SPE-400B - page 29

    English _29 ● NETWORK CONNECTION AND SETUP PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a network encoder connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the network encoder in it. Manual Port Range Forwarding From the Setup menu of the Broadband Rou ...

  • Samsung SPE-400B - page 30

    30_ network connection and setup network connection and setup Ex) If the network encoder (SPE-1600R) is connected to the router Ø CH 3 (192.168.1.102) Web Server Port 8082 VNP Port 4522 RTSP Port 3002 Policy Server Port 943 Ù CH 16 (192.168.1.115) Web Server Port 8095 VNP Port 4535 RTSP Port 3015 Policy Server Port 943 Ù CH 2 (192.168.1.101) Web ...

  • Samsung SPE-400B - page 31

    English _31 ● NETWORK CONNECTION AND SETUP CONNECTING TO THE NETWORK ENCODER FROM A SHARED LOCAL PC Run the IP Installer. It will scan for connected network encoders and display a list of them. Double-click a network encoder to access. The Internet browser starts and connects to the network encoder. Access to the network encoder can also be gaine ...

  • Samsung SPE-400B - page 32

    32_ web viewer web viewer CONNECTING TO THE NETWORK ENCODER Normally, you would Launch the Internet browser. Type the IP address of the network encoder in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:0230:abcd: ffff:0000:0000:ffff:1111  http://[ ...

  • Samsung SPE-400B - page 33

    English _33 ● WEB VIEWER To check the DDNS address If the network encoder is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be informed of the IP address changed by DD ...

  • Samsung SPE-400B - page 34

    34_ web viewer web viewer This network encoder uses Microsoft Silverlight for displaying the video. INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. Click < ...

  • Samsung SPE-400B - page 35

    English _35 ● WEB VIEWER When done, click < Close >. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen. For normal installation, set the Block Popup setting as follows: ex) Internet Explorer l Tools l Block Popup l Always allow popups from the cu ...

  • Samsung SPE-400B - page 36

    36_ web viewer web viewer USING THE LIVE SCREEN Item Description  Monitoring Move to the monitoring screen. b Setup Move to the Setup screen. c Viewer Screen Displays the Live video on the screen.  Alarm Output Activate the Alarm Out port.  Hide the alarm indicator Hides the alarm indicator near the border of the viewer screen.  Camera ...

  • Samsung SPE-400B - page 37

    English _37 ● WEB VIEWER Item Description  Screen Optimization, Full Screen Adjust the screen to the optimal size, and display the Full Screen icon on the Live screen.  Capture Saves the snapshot as an image file in the .bmp format.  Video Format You can select a profile type in < Video profile > under the < Video > setup men ...

  • Samsung SPE-400B - page 38

    38_ web viewer web viewer To control the PTZ function You can control the connected camera that supports the PTZ functions if it is connected to the network encoder. If the PTZ function is not controllable, check the RS-485 connection status of the camera and network encoder (Page 17 ) Check if both connected camera and protocol are set properly. ( ...

  • Samsung SPE-400B - page 39

    English _39 ● SETUP SCREEN SETUP You can configure the video, network, event and system settings of the network encoder in the network. In the Live screen, click [ Setup ( ) ]. The Setup screen appears. VIDEO SETUP Video profile From the Setup menu, select the < Video ( ) > tab. Click < Video profi le >. Select a < Video profi le ...

  • Samsung SPE-400B - page 40

    setup screen 40_ setup screen To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the monitoring condition. Select a profi le number. Provide the name and select a codec. Specify the conditions under which the codec will be applied. Specify the details of the selected codec inclu ...

  • Samsung SPE-400B - page 41

    English _41 ● SETUP SCREEN PTZ setup You can activate the zoom and set the zoom preset as you want. From the Setup menu, select the < Video ( ) > tab. Click the < PTZ setup >. Set the preset and serial port. Preset setup : Select a number out of 255 and click Move button to adjust the camera to the angle defi ned by the selected pres ...

  • Samsung SPE-400B - page 42

    setup screen 42_ setup screen NETWORK SETUP Interface From the Setup menu, select the < Network ( ) > tab. Click < Interface >. Set the < Interface > and < IPv6 setup > as necessary. IP type : Select an IP connection type. Manual : Specify the IP address, Subnet Mask, Gateway, DNS1, and DNS2. DHCP : Specify the DNS1 and DNS2 ...

  • Samsung SPE-400B - page 43

    English _43 ● SETUP SCREEN Port From the Setup menu, select the < Network ( ) > tab. Click < Port >. Type in each item in the Port menu as necessary. Neither the port range between 0 and 1023 nor port 3702 is available. HTTP port : HTTP port used to access the network encoder via the web browser. The default is 80(TCP). VNP port : Set ...

  • Samsung SPE-400B - page 44

    setup screen 44_ setup screen Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server. Host name : Enter the name of the host (i.e., host name of Dyndns) that is registered with the DDNS server. User name : Enter the user name for the DDNS service. (i.e., user ID that is regis- tered with Dyndns) Password : Enter ...

  • Samsung SPE-400B - page 45

    English _45 ● SETUP SCREEN Select a < CLASSIFICATION > and specify the < MODEL NUMBER >. Specify the product location with a description if necessary. Click [ REGISTRATION ]. The product will be added to the prod- uct list that you can check. To connect to the Samsung DDNS in network encoder setup From the DDNS setup page, set < DD ...

  • Samsung SPE-400B - page 46

    setup screen 46_ setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. From the Setup menu, select the < Network ( ) > tab. Click < IP fi ltering >. Select a < Filtering type >. Deny : If selecting this, access from those IPs that are added to the fi ltering will be restricted. All ...

  • Samsung SPE-400B - page 47

    English _47 ● SETUP SCREEN Installing the certificate Enter the certifi cate name. Select the certifi cate fi le to be installed and certifi cate key, and click [ Install ( ) ] button. Deleting the certificate Click [ Delete ( ) ] button. EVENT SETUP FTP / E-mail You can configure the FTP / E-mail server settings so that you can transfer the ...

  • Samsung SPE-400B - page 48

    setup screen 48_ setup screen E-mail confi guration Use SSL : Check this option if you use an email server using SSL. ex) Google Server address : Enter the IP address of the email server that you use for the email transfer. ex) SMTP. hotmail. com Use authentication : Select whether to use authorization. User ID : Enter the user ID for logging into ...

  • Samsung SPE-400B - page 49

    English _49 ● SETUP SCREEN Alarm input You can set the alarm input type, activation time, and operation mode. From the Setup menu, select the < Event ( ) > tab. Click < Alarm input >. To set the Alarm input Set < Input device setup > to < Enable >. Specify the < Type >. Type Normal Open : It is normally open, but if ...

  • Samsung SPE-400B - page 50

    setup screen 50_ setup screen Motion detection You can set target detection region and motion, as well as the alarm signal output. From the Setup menu, select the < Event ( ) > tab. Click < Motion detection >. To set the Motion detection Set < Motion detection > to < Enable >. Specify the < Sensitivity >. Sensitivity : ...

  • Samsung SPE-400B - page 51

    English _51 ● SETUP SCREEN Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. From the Setup menu, select the < Event ( ) > tab. Click < Time schedule >. To set the timer event Set < Timer event setup > to < Enable >. Specify the < Activation ...

  • Samsung SPE-400B - page 52

    setup screen 52_ setup screen Video loss You can set the alarm to be generated on a camera disconnection, which causes a video loss. From the Setup menu, select the < Event ( ) > tab. Click < Video loss >. To set the video loss Set < Video loss > to < Enable >. Set the activation time and condition. Refer to the “ Alarm In ...

  • Samsung SPE-400B - page 53

    English _53 ● SETUP SCREEN SYSTEM SETUP Product information From the Setup menu, select the < System ( ) > tab. Click < Product information >. Check the network encoder information, or provide details according to your network environment. Device name : Provide a device name that will be displayed on the Live screen. Location : Specif ...

  • Samsung SPE-400B - page 54

    setup screen 54_ setup screen System time setup : Specify the time and date that will be applied to your system. Manual : Specify the time manually. Synchronize with NTP server : Sync with the time of the specifi ed server address. Synchronize with PC viewer : Synchronize the time with the connected PC. When done, click [ Apply ( ) ]. If you selec ...

  • Samsung SPE-400B - page 55

    English _55 ● SETUP SCREEN Upgrade / Reboot From the Setup menu, select the < System ( ) > tab. Click < Upgrade / Reboot >. Select a desired item and set it appropriately. Upgrade : Performs upgrading the system. Factory default : Resets the system to the factory default. Except network parameter : Reset the other settings except for ...

  • Samsung SPE-400B - page 56

    setup screen 56_ setup screen To save the current settings and restore the backup settings Click [ Backup ]. The Save As dialog should appear. Specify the backup path with a proper fi le name, and click [ Save ]. The backup fi le will be saved to the specifi ed path in the format of “ .bin ”. To restore the backup settings, click [ Restore ] ...

  • Samsung SPE-400B - page 57

    English _57 ● SETUP SCREEN Log You can check the system log or event log. From the Setup menu, select the < System ( ) > tab. Click < Log >. Select a log type. Syslog : You can check the system logs where any system changes are recorded including the time information. Evtlog : You can check the event logs including the time informatio ...

  • Samsung SPE-400B - page 58

    appendix 58_ appendix SPECIFICATION Items Description Operational Video In 4 CVBS : 1.0 Vp-p / 75Ω composite, NTSC/PAL Auto Detected Video Out - De-interlacing Filter Built-in Event Trigger Motion Detection, Alarm Input, Video Loss Alarm I/O Input 4ea / Output 4ea Remote Control Interface RS-485 Port x4 (Half Duplex) RS-485 Protocol SAMSUNG-T/E, P ...

  • Samsung SPE-400B - page 59

    English _59 ● APPENDIX Items Description Network Protocol TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, ONVIF Security HTTPS(SSL) Login Authentication Digest Login Authentication IP Address Filtering User access Log Streaming Method Unicast / Multicast Ma ...

  • Samsung SPE-400B - page 60

    appendix 60_ appendix PRODUCT OVERVIEW Unit: mm (inch) 236.7 (9.32") 35 (1.37") 77 (3.03") 82 (3.23") ...

  • Samsung SPE-400B - page 61

    English _61 ● APPENDIX TROUBLESHOOTING PROBLEM SOLUTION I can’t access the network encoder from a web browser. Check whether the <Network> settings of the network encoder are valid and correct. Check to make sure that all network cables have been connected properly. If connected using DHCP, verify that the network encoder is able to acqui ...

  • Samsung SPE-400B - page 62

    OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows. Component Name License License URL lighttpd 1.4.25 librtp 1.20 BSD 2.0 BSD 1.0 http://www.opensource.org/licenses/bsd-license.html lighttpd is a secure, fast, compliant, and very fl exible web-server that has been opt ...

  • Samsung SPE-400B - page 63

    Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modifi cation, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Red ...

  • Samsung SPE-400B - page 64

    GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Correspondin ...

  • Samsung SPE-400B - page 65

    original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's ...

  • Samsung SPE-400B - page 66

    based on the Program is not required to print an announcement.) These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you ...

  • Samsung SPE-400B - page 67

    However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative w ...

  • Samsung SPE-400B - page 68

    a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the ...

  • Samsung SPE-400B - page 69

    WARRANTY ; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program ; if not, write to the Free Software Foundation, Inc.,51 Franklin Street, Fifth Floor, Boston, MA 02110-13 ...

  • Samsung SPE-400B - page 70

    or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you rece ...

  • Samsung SPE-400B - page 71

    An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work un ...

  • Samsung SPE-400B - page 72

    3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfi lling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When yo ...

  • Samsung SPE-400B - page 73

    model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access ...

  • Samsung SPE-400B - page 74

    or installed by the recipient, or for the User Product in which it has been modifi ed or installed. Access to a network may be denied when the modifi cation itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation ...

  • Samsung SPE-400B - page 75

    or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explic ...

  • Samsung SPE-400B - page 76

    Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent license” is any express agreement or co ...

  • Samsung SPE-400B - page 77

    work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Fou ...

  • Samsung SPE-400B - page 78

    USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the fi rst released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take ...

  • Samsung SPE-400B - page 79

    Public License therefore permits such linking only if the entire combination fi ts its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General ...

  • Samsung SPE-400B - page 80

    is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in a ...

  • Samsung SPE-400B - page 81

    it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under ...

  • Samsung SPE-400B - page 82

    1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable “ work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modifi ed executable containing the modifi ed Library. (It is understood that the user who changes ...

  • Samsung SPE-400B - page 83

    it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and condi ...

  • Samsung SPE-400B - page 84

    later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to a ...

  • Samsung SPE-400B - page 85

    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston ...

  • Samsung SPE-400B - page 86

    Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@ cryptsoft. com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft. com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are ...

  • Samsung SPE-400B - page 87

    Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has ...

  • Samsung SPE-400B - page 88

    SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefi eld Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373- ...

Manufacturer Samsung Category Server

Documents that we receive from a manufacturer of a Samsung SPE-400B can be divided into several groups. They are, among others:
- Samsung technical drawings
- SPE-400B manuals
- Samsung product data sheets
- information booklets
- or energy labels Samsung SPE-400B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Samsung SPE-400B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Samsung SPE-400B, service manual, brief instructions and user manuals Samsung SPE-400B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Samsung SPE-400B.

Similar manuals

A complete manual for the device Samsung SPE-400B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Samsung SPE-400B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Samsung SPE-400B.

A complete Samsung manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Samsung SPE-400B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Samsung SPE-400B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Samsung SPE-400B, that we can find in the current document
3. Tips how to use the basic functions of the device Samsung SPE-400B - which should help us in our first steps of using Samsung SPE-400B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Samsung SPE-400B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Samsung SPE-400B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Samsung SPE-400B?

Use the form below

If you did not solve your problem by using a manual Samsung SPE-400B, ask a question using the form below. If a user had a similar problem with Samsung SPE-400B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)