Manual Hotpoint 1509)50-4

16 pages 0.79 mb
Download

Go to site of 16

Summary
  • Hotpoint 1509)50-4 - page 1

    Instruction booklet ,1509)50-4 Contents Installation, 2-5 Positioning and levelling Technical data Electrical connection Connecting the water supply Description of the appliance, 6 Overall view Control panel Loading the racks, 7 Lower rack Cutlery basket Upper rack Start-up and use, 8-9 Starting the dishwasher Loading the detergent Washing options ...

  • Hotpoint 1509)50-4 - page 2

    2 EN Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabi ...

  • Hotpoint 1509)50-4 - page 3

    3 EN The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment. Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user. The manuf ...

  • Hotpoint 1509)50-4 - page 4

    4 EN Connecting the water supplies Connection to the water and electricity supplies should only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable. Connecting the water inlet hose The water inlet and outlet hoses and the electricity supply cable may be positioned towards ...

  • Hotpoint 1509)50-4 - page 5

    5 EN * Only available in selected models. Anti-flooding protection * To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance. Some models are also equipped with the supplementary safety device New Acqua Stop * , which guarantees ant ...

  • Hotpoint 1509)50-4 - page 6

    6 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate 12. Control panel *** *** Only in completely built-in models. * Only available in selected models . Descrip ...

  • Hotpoint 1509)50-4 - page 7

    7 EN Loading the racks Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. After loading the appliance, check that the sprayer arms can rotate freely. Lower rack The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc. as seen in the Loading examples. Plates and large covers sh ...

  • Hotpoint 1509)50-4 - page 8

    8 EN Start-up and use Measuring out the detergent A good wash result also depends on the correct amount of detergent being used; exceeding the stated amount does not result in a more effective wash and increases environmental pollution.  Only use detergent which has been specifically designed for dishwashers. DO NOT USE washing up liquid. Using ...

  • Hotpoint 1509)50-4 - page 9

    9 EN * Only available in selected models. Multi-functional tablets (Tabs) This option optimises washing and drying results. When using multi-functional tablets, press the MULTI- FUNCTIONAL TABLETS button. The corresponding indicator light will illuminate. The Multi-functional tablets option results in the lengthening of the wash cycle. The MU ...

  • Hotpoint 1509)50-4 - page 10

    10 EN Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. Notes: To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 gr. of powder = approximately 15 ml of liquid - 1 teaspoon = 5 gr. of powder = approximately 5 ml of liquid Optimum performance levels whe ...

  • Hotpoint 1509)50-4 - page 11

    11 EN G H F Rinse aid and refined salt Water Har dness Table ° dH ° fH mmol/l level 0 6 0 10 0 1 1 6 11 11 20 1.1 2 2 12 17 21 30 2.1 3 3 17 34 31 60 3.1 6 4 34 50 61 90 6.1 9 5 * For value s b et ween 0 ° f and 10 ° f, we do not recomme nd the use of s alt. * this setting may cau se a slight increa se in the duration of the cycle. Only use pro ...

  • Hotpoint 1509)50-4 - page 12

    12 EN Care and maintenance Shutting off the water and electricity supplies  Turn off the water tap after every wash cycle to avoid leaks.  Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher  The external surfaces of the machine and the control panel may be cleaned using a non-abrasive ...

  • Hotpoint 1509)50-4 - page 13

    13 EN Precautions and advice * Only available in selected models. The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. General safety  This appliance is not intended for use by persons (includin ...

  • Hotpoint 1509)50-4 - page 14

    14 EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance). Troubleshooting Problem: Possible cau ses / Solutions: The dishwasher doe s not start or cannot be controlled • Switch off the appliance b y pressing the ON/OFF button, switch it back on after approximately on e ...

  • Hotpoint 1509)50-4 - page 15

    15 EN After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensu ...

  • Hotpoint 1509)50-4 - page 16

    16 EN Guarantee Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturers guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or m ...

Manufacturer Hotpoint Category Dishwasher

Documents that we receive from a manufacturer of a Hotpoint 1509)50-4 can be divided into several groups. They are, among others:
- Hotpoint technical drawings
- 1509)50-4 manuals
- Hotpoint product data sheets
- information booklets
- or energy labels Hotpoint 1509)50-4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hotpoint 1509)50-4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hotpoint 1509)50-4, service manual, brief instructions and user manuals Hotpoint 1509)50-4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hotpoint 1509)50-4.

Similar manuals

A complete manual for the device Hotpoint 1509)50-4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hotpoint 1509)50-4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hotpoint 1509)50-4.

A complete Hotpoint manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hotpoint 1509)50-4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hotpoint 1509)50-4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hotpoint 1509)50-4, that we can find in the current document
3. Tips how to use the basic functions of the device Hotpoint 1509)50-4 - which should help us in our first steps of using Hotpoint 1509)50-4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hotpoint 1509)50-4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hotpoint 1509)50-4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hotpoint 1509)50-4?

Use the form below

If you did not solve your problem by using a manual Hotpoint 1509)50-4, ask a question using the form below. If a user had a similar problem with Hotpoint 1509)50-4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)