Manual Barco r9010021

165 pages 7.27 mb
Download

Go to site of 165

Summary
  • Barco r9010021 - page 1

    Bar coRLM G5 Owner’s manual R9010020 R9010021 R5976629/05 02/06/2006 ...

  • Barco r9010021 - page 2

    Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: sales.events@barco.com Visit us at the web: www.barco.com Printed in Taiwan ...

  • Barco r9010021 - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose. Ba rco m ay make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time with ...

  • Barco r9010021 - page 4

    ...

  • Barco r9010021 - page 5

    Table of con tents T ABLE OF CONTENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ...................................................................................... 5 1 . 1 B o x c o n t e n t ........... ................... ............... ................... ............... .................. ............... ........ ... 5 1 . 2 P r o j e ...

  • Barco r9010021 - page 6

    Table of con tents 7 . G e n e r a l M e n u ......................................................................................................5 7 7.1 General Menu overview . . .............................. ............... ................... ............... .................. .......... 5 7 7 . 2 P a u s e ................................ ... ...

  • Barco r9010021 - page 7

    Table of con tents 1 3 . 4 M e n u b a r p o s i t i o n ....................... ................... ............... .................. ............... .................. ...... 1 1 7 1 3 . 5 S t a t u s b a r p o s i t i o n ........................... .................. ............... ................... ............... ............ ........ 1 1 ...

  • Barco r9010021 - page 8

    Table of con tents 4 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 9

    1. Pa ckaging and Dimensions 1. P ACKAGING AND DIMENSIONS Overview • Box content • Projector Packaging • Dimensions 1.1 Box content CEE7 European power plug to connect the power cord to the wall outlet. ANSI 73.1 1 American power plug to connect the power cord to the wall outlet. Content • 1 BARCO RLM G5 project or (weight ± 30 kg or 67 lb ...

  • Barco r9010021 - page 10

    1. Packaging and Dime nsions PULL TO OPE Image 1-1 Image 1 -2 Projector packa ging Save the original shipping carton and packi ng material, they will be necessary if yo u ever have to ship your projector . For maxim um protection, repack your projector as it w as originally packed at the factory . 6 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 11

    1. Pa ckaging and Dimensions 1.3 Dimensions Side view 289,7 11,406 [] 2,3 ,091 [] 316,5 12 461 [ ] 2 4,5 ,965 [ ] Image 1-3 Side view Front view 705 [27.76] 51.9 [ 2.04 ] 43 [1.69] 180 [7.09] 93.5 [3.68] Image 1-4 Front view R5976629 BARC ORLM G5 02/06/200 6 7 ...

  • Barco r9010021 - page 12

    1. Packaging and Dime nsions Bottom view 170 [6.69] 60 [2.36] 170 [6.69] 1 3 0 [ 5 . 1 2 ] 6 0 [ 2 . 3 6 ] 1 3 0 [ 5 . 1 2 ] 120 [4.72] 60 [2.36] 354.5 [ 1 3 . 96] 200 [7.87] 120 [4.72] 27.2 [1.07] 76.8 ° 2 [0.079] 188.8 [7.43] 492.4 [19.39] 1 3 0 [ 5 . 1 2 ] 6 0 [ 2 . 3 6 ] 1 3 0 [ 5 . 1 2 ] Image 1-5 Bottom view 8 R5976629 BAR CORLM G5 02/06/200 ...

  • Barco r9010021 - page 13

    1. Pa ckaging and Dimensions To p v i e w 460 [18.11] 122.5 [4.82] 570 [22.44] 82.5 [3.25] 540 [21.26] 705 [27.76] 82.5 [3.25] 707.8 [27 87] 122.5 [4.82] Image 1-6 To p v i e w R5976629 BARC ORLM G5 02/06/200 6 9 ...

  • Barco r9010021 - page 14

    1. Packaging and Dime nsions 10 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 15

    2. Installation Guidelines 2. INST ALLA TION GUIDELINES Overview • Safety Warni ngs • General • Projector Configuration • Safety Area around projector • Lenses • Battery Insertion in the R emote Control • Stacking projectors • Rigging points and accessories W ARNING : Before installing t he projector , read first the safety instruc ...

  • Barco r9010021 - page 16

    2. Installation G uidelines Environment Do not install the projection system in a si te near heat sources such a s radiators or air ducts, or in a place subject to direct sunlight, excessive dust or humidity . Be aware that room heat rises to the ce iling; che ck that temperature near the insta llation site is not excessive. Environment condition c ...

  • Barco r9010021 - page 17

    2. Installation Guidelines PD A B C PD Image 2-1 Front-Ceiling con figuration A Side view B T op view CB a c k v i e w PD Distance projector - screen R5976629 BARC ORLM G5 02/06/200 6 13 ...

  • Barco r9010021 - page 18

    2. Installation G uidelines PD A B C PD Image 2-2 Front-T able c onfigura tion A Side view B T op view CB a c k v i e w PD Distance projector - screen 2.4 Safety Area around projector Safety area Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Image 2-3 Air flow , safety area 14 R5976 ...

  • Barco r9010021 - page 19

    2. Installation Guidelines 2.5 Lenses Overview • Lenses • Lens formulas • Lens installation • Cleaning the lens 2.5.1 Lense s A vailabl e lenses Lenses Order num ber RLD(0.8) R9832640 RLD(1.5-1.8) R9832642 RLD(1.8-2.25) R9832643 RLD(2.25-3.0) R9832644 RLD(3.0-4.5) R9832645 RLD(4.5-7.0) R9832646 TLD lenses can b e used on the pro jector toge ...

  • Barco r9010021 - page 20

    2. Installation G uidelines How to replace with anot her lens? Follow the next procedure: 1. Move the handle (A) of the lens anchor system to the left and take out the lens. 2. T ake the new lens assembly out of its packing material and remove the lens caps on both sides. 3. Push the lens, motors at the top, in the lens block gap horizontally , lin ...

  • Barco r9010021 - page 21

    2. Installation Guidelines How to i nstall th e batterie s 1. Push the cover tab (A) with the fingernail a little backw ards and pull upwards the cover top (B). (image 2-5) 2. Slide the cover forwards to remove. (image 2-6) 3. Push the battery body towards the spring and lift it up to remove. ( image 2-7) 4. Insert two AA size batteri es, making su ...

  • Barco r9010021 - page 22

    2. Installation G uidelines Image 2-8 Stacking two projectors Image 2-9 Closing the riggin g sockets Image 2-10 Mounting the securi ty chain 18 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 23

    2. Installation Guidelines 2.8 Rigging points and accessories 2.8.1 Overview Clamps Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints. Consult a professional structural engineer prior to suspe nding th e ceiling mount from a s ...

  • Barco r9010021 - page 24

    2. Installation G uidelines Image 2-1 1 Mounting the clamps fixation Image 2-12 Mounting the rigging clamp 20 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 25

    3. Connecti ons 3. CONNECTIONS Overview • Power connection • Input source connection • 5-Cable input • Composite Video Input • S-Video input • Digital Visual Interface (DVI) input • Computer input (RGB analog) • Serial Digital Interface • Communication connection • Extended configuration 3.1 Power connection AC power (mains) cor ...

  • Barco r9010021 - page 26

    3. Connecti ons 3.2 Input source connection Overview • Input section • Input facilities 3.2.1 Input section Input Layers The input section is divided in layers, each o f them regrouping severa l inputs, this architecture allows the input section to be upgraded at any time with an optional analog or digital layer . 1. Layer 1: analog layer conta ...

  • Barco r9010021 - page 27

    3. Connecti ons 3.3 5-Cable input Input specificat ions The 5-cable input section is made of 5 BNC input terminals. 0.7 Vpp ± 3dB 75 Ω terminated TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO SDI IN SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232 C Image 3-3 5-cable i nput Component Video In Component Video the term compo ...

  • Barco r9010021 - page 28

    3. Connecti ons 3.4 Composite V ideo Input Input specificat ions The Composite video input section is made of 1 BNC input terminal. Co nnect Composite video signals from a VCR, OFF air signal decoder , etc.. 1.0 Vpp ± 3dB 75 Ω terminated No loop through TWO WAY HARDWI RED REMO TE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO SDI IN SDI OUT S-VIDEO R.C ...

  • Barco r9010021 - page 29

    3. Connecti ons 3.5 S-Video input Input specificat ion TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO SDI IN SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232 C Image 3-5 S-Video indic ation Pin configurat ion 4 pin connecto r 4 3 1 2 Image 3-6 For S-Video For Video pin 1 : earth (ground) luminance pin 1 : earth (ground) video ...

  • Barco r9010021 - page 30

    3. Connecti ons How to select the S-Vid eo input ? 1. Press 4 on the RCU Note: Another way for selecting this input is via Source on the local keyp ad or via the Menu. The projector allow s the input of mo re S-Video signals (up to 3 S-Video signals) via th e S-Video extended config urati on. 3.6 Digital V isual Interface (DVI) input DVI Digital Vi ...

  • Barco r9010021 - page 31

    3. Connecti ons Pin 8 Not connected Pin 20 TMD S DA T A5- Pin 9 TMDS DA T A1- Pin 21 TMDS DA T A5+ Pin 10 TMDS DA T A1+ Pin 22 TMDS Clock Shield Pin 1 1 TMDS DA T A1/3 Shield Pin 23 TMDS Clock+ Pin 12 TMDS DA T A3- Pin 24 TMDS Clock- How to select the DVI Input ? 1. Press 5 on the RCU Note: Another way for selecting this input is via Source on the ...

  • Barco r9010021 - page 32

    3. Connecti ons 3.8 Serial Digital Interface SDI Serial Digital Interface Input specificat ions SDI input : BNC SDI output : BNC (= loop through) typical : 0.8 Vpp 75 Ω terminated output impedance: 75 Ω TWO WAY HARDWI RED REMO TE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO SDI IN SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232 C Image 3-9 How ...

  • Barco r9010021 - page 33

    3. Connecti ons TWO WAY HARDWI RED REMO TE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO SDI IN SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232 C Image 3- 10 RS232 indicat ion Applicati ons of the RS232 connect ion Remote control: • easy adjustment of projector via IBM P C (or compatible) or MAC connection. • address range from 0 to 255. • all ...

  • Barco r9010021 - page 34

    3. Connecti ons Inputs R G B H V VID EO RGBHV R G B H V - RG S B R G S B - - - RGBS R G B S - - Component PR Y PB - - - S-Video - - - - C Y S-Video C - Y - - - Composite VIDEO ---- - Composite - VIDEO - - - - Composite - - VIDEO - - - Composite - - - - VIDEO Signals Composite - ---- VIDEO T able 3-4 Extended configur ation of the 5-ca ble input: th ...

  • Barco r9010021 - page 35

    3. Connecti ons How to set up the S-Video extende d configurati on ? 1. Connect the video sources to the desired connector (image 3-14) Note: An adapter cable is required Chroma Luma Video Y R/PR G/Y B/PB Hs/Cs Vs VIDEO S-VIDEO Video C Image 3- 14 Connecting 2 composi te Video sign als to the S-Vi deo connector Multiple video signa ls can not be vi ...

  • Barco r9010021 - page 36

    3. Connecti ons 32 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 37

    4. Getting Started 4. GETTING ST ARTED Overview • T erminology overview • Switching on • Lamp runtime • Switching to standby • Switching off • T emperature error DMD •U s i n g t h e R C U • Projector address • Controlling the projector • Quick lens adjustment • Digital Zoom • Quick Picture in Pict ure selection 4.1 T ermino ...

  • Barco r9010021 - page 38

    4. Getting Started F1 F2 F3 MENU BACK ENTER PAUSE PIP PHASE TINT COLOR BRIGHTN CONTR VOL 9 0 7 8 5 6 3 4 1 2 LOGO AUTO IMAGE DIGI ZOOM SDI SB-PC DVI VIDEO S-VIDEO RGB PC LENS ZOOM LENS SHIFT LENS FOCUS TEXT 1 21 19 2 3 4 5 6 7 8 9 10 11 12 13 16 14 15 18 20 17 Image 4-1 17 18 16 9b 10 6 22 23 Led 1 Led 2 Led 3 Image 4-2 34 R5976629 BAR CORLM G5 02/ ...

  • Barco r9010021 - page 39

    4. Getting Started No. Key name Description 1 Function keys user programmable keys with functions for direct access. 2 MENU Menu key , to enter or exit the T ool bar menu. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). P ress the recessed address key with a pencil, followed by pressing one digit button betwee ...

  • Barco r9010021 - page 40

    4. Getting Started 4.2 Sw itchi ng on How to switch on. 1. Press the power switch to switch on the projector . - When ’0’ is pushed in, th e projector is switched off. - When ’1’ is pushed in, the projector is switched on The projector starts in standby mode , LED1 is red. Starting image proj ection. 1. Press Standby key once on the local k ...

  • Barco r9010021 - page 41

    4. Getting Started ON OFF Lamp 1 Lamp 2 Runtime(hrs) Lamp Status X(Lamp Take Over) X-30 (W ARNING) 2X-30 (W ARNING) 2X (ALERT) ON OFF Lamp 1 +Lamp 2 Runtime(hrs) Lamp Status X-30 (W ARNING) X (ALERT ) A B Image 4-4 Lamp runtime manage ment A Single lamp mode B Dual lamp mode x Maximum lamp runtime In single mode, a lamp switch will be executed as f ...

  • Barco r9010021 - page 42

    4. Getting Started Ambient temperature range within the operating temper ature range of the DMD is situated : +10°C and +40 °C. 4.7 Using the RCU Pointing to a refle ctive screen 1. Point the front of the RCU to the reflective screen surface. (image 4-5) F 1 F 2 F 3 F 4 F 5 A D J E X I T E N T E R P A U S E P H A S E T E X T S H A R P N T I N T C ...

  • Barco r9010021 - page 43

    4. Getting Started 1 2 A BC D 2 3 1 Image 4-7 Stereo jack pin conf igurat ion A tip: Left channel B ring: right channel C screen: common ( GND) De x t e r n a l s w i t c h 1S t e r e o j a c k 2 Mono jack The Remote connecti on uses a standard t wo wire cable terminated o n each end with a 3.5 mm male (mono/stereo) phone jack. This cable is not de ...

  • Barco r9010021 - page 44

    4. Getting Started Image 4-9 T wo way hard -wired remote 4.8 Projector address Overview • Address setting • Displaying and Programming addresses into the RCU 4.8.1 Address setting Projector address Address installed in the project or to be individually controlled. Common address Default address. Projector will always execute the command coming ...

  • Barco r9010021 - page 45

    4. Getting Started 4.8.2 D isplaying and Programming addr esses into the RCU Displaying the P rojector Address o n the Screen. 1. Press the Address key (recessed key on the RCU) with a pencil. The projector ’s address will be displayed in a ’T ext box’ T o continue usin g the RCU w ith that specific ad dress, it is necessary to enter the sam ...

  • Barco r9010021 - page 46

    4. Getting Started Brightness Use the + button for a higher brightness. Use the - button for a lower brightness. Contrast Use the + button for a higher contrast. Use the - button for lower contrast. Color Use the + button for richer colors. Use the - button for lighter colors. T int (Hue) T int is only active for V ideo and S-Video when using the N ...

  • Barco r9010021 - page 47

    4. Getting Started Lens adjustment Use ↑ and ↓ for zoom Use ← and → for focus Press <enter> for SHIFT mode Press <LOGO> or <LENS> for test patter n Lens adjustment Use ↑ and ↓ for vertical shift Use ← and → for horizontal shift Press <enter> for ZOOM/FOCUS Press <LOGO> or <LENS> for test patter n ...

  • Barco r9010021 - page 48

    4. Getting Started 4.10.3 Direct Lens Adjust ment (RCU) Lens adjustment but ton on the Remote Control On the Remote Control three buttons with double action are prov ided, allowing direct alignment for lens ZOOM, FOCUS and VER- TICAL SHIFT . F or Horizontal Shift, some projectors use the VOL butto n. 1. Press LENS ZOOM button [-] or [+] (A) for cor ...

  • Barco r9010021 - page 49

    4. Getting Started A B C D Image 4- 16 Digital zoom A Normal image B Digital zoom out C Digital zoom in D Panning of the zoomed image T o return to the normal image, press MENU, go to To o l s , select PiP select and ch eck Full screen . 4.12 Quick Picture in Picture selection Quick select ion 1. Press PiP key on the RCU immediately followed by the ...

  • Barco r9010021 - page 50

    4. Getting Started 46 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 51

    5. Getting used with th e Menu structure 5. GETTING USED WITH THE MENU STRUCTURE 5.1 Ho w to start up the menus PC like menu structu re The BARCO RLM G5 h as a build in “PC like” menu bar which allows easy access to different parameters for setting up the projector. How to acti vate 1. Press MENU on the RCU. The menu bar will be displayed on th ...

  • Barco r9010021 - page 52

    5. Getting used with the Menu structure How to exit the submenu ? 1. Press BACK to exit a submenu. Press MENU to e xit the menu 5.3 Using the Dialog boxes How to use the dia log boxes ? Some parameters are modified by means of a dialog box, where selections can be ma de and/or values can be entered. The values can be en tered in several ways: Enter ...

  • Barco r9010021 - page 53

    5. Getting used with th e Menu structure In some cases an alphanu meric value (file name, ...) ha s to be entered. U se ↑ or ↓ to scrol l throu gh the char - acter values o nce the input field is activated. Following cha racters can be browsed in this particular order: Decimal scroll list: 0123456789 Signed decimal scroll list: 0123456789- ASCI ...

  • Barco r9010021 - page 54

    5. Getting used with the Menu structure 50 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 55

    6. Source Selection 6. SOURCE SELECTION Overview • Source Selection overview • The use of icons • Source selection • Selecting a data source on the 5-cable input • Composite Video • S-Video s electi on • The Video Selector 6.1 So urce Selection overview Source selection overvi ew •D a t a o n B N C ’ s • Component Video • RG(s ...

  • Barco r9010021 - page 56

    6. Source Selection 3. Use ↑ or ↓ to select one of the dif ferent sources (Press → to pull down if the item has a submenu). 4. Press ENTER to confirm your choice. On the screen appears now the selected source with at the same time for a few seconds a te xt box with source information. (image 6-1) Video source 1 Video Video625.c06 Image 6-1 So ...

  • Barco r9010021 - page 57

    6. Source Selection 6.5 Composite Video Possible connect ions In normal mode, one video source can be con nected to the video input. In extended mode, up to 7 different video sources can be connected to the normal video input, or to the extended 5-cable input or to the S-Video. When the extended mode is not switch ed on, the on screen menu will hav ...

  • Barco r9010021 - page 58

    6. Source Selection 2. Press ↓ to pull down the Source Selection menu. 3. Use ↑ or ↓ to select S-Video . 4. Press → to pull down the submenu. 5. Use ↑ or ↓ to select one of the di fferent S-V ideo inputs. (image 6-4) 6. Press ENTER to confirm your choice. A white bullet indicates the selected S-Video source. This source will be displaye ...

  • Barco r9010021 - page 59

    6. Source Selection Image 6-5 How to select an input on the V ideo Select or 1. Use ← or → to browse through the different inputs. 2. Press ENTER to select. Use MENU or BACK to exit the Video Selector . Graphical interf ace B C D E A A B C D E Image 6-6 A BNC or S-Video connector on the video selector can be in one of following conditions: • ...

  • Barco r9010021 - page 60

    6. Source Selection 56 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 61

    7. General Menu 7. GENERAL M ENU Overview • General Menu overview • Pause • Freeze • Standby Timer • Identification 7.1 General Menu overview General M enu structu re • Pause • Freeze • Standby timer ... • Identification 7.2 Pause Interrupting the imag e projection With the Pause function, the image projection can be stopped, the ...

  • Barco r9010021 - page 62

    7. General Menu H o wt of r e e z et h ei m a g e? 1. Press MENU to activate the menu bar . 2. Press → to select General . 3. Press ↓ to pull down the General menu. 4. Use ↑ or ↓ to select Fr eeze . (image 7-2) 5. Press ENTER to activate the Freeze function. Image 7-2 The image can also be frozen using the FREEZE key o n the RCU. 7.4 Standb ...

  • Barco r9010021 - page 63

    7. General Menu Image 7-4 Image 7-5 7.5 Identification The projector’s id entification sc reen The identifi cation screen displays the projector ’ s main characteristics These are: •P r o j e c t o r t y pe • Projector address • Software version controller unit • RS232 Baudrate • Serial number of projector How to display th e identifi ...

  • Barco r9010021 - page 64

    7. General Menu Image 7-7 60 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 65

    8. Im age Menu 8. IMAGE MENU Overview • Image menu overview • Settings • Aspect ratio • Show native resolution • Keystone correction • Color T emperature • Filmmode detection •B l a n k i n g • Input Balance • AGC on Video • Manual Gain Control R5976629 BARC ORLM G5 02/06/200 6 61 ...

  • Barco r9010021 - page 66

    8. Image Menu 8.1 Image menu overview Overview • Settings - Contrast - Brightness -C o l o r -T i n t - Sharpness - Gamma -P h a s e - Noise Reduction • Aspect ratio -A u t o - [4:3] - [16:9] - [5:4] - [2.35] - [2.88] - [1.78] -C u s t o m • Show native resolution -O n -O f f • Keystone... • Color temperature - Projector white - Computer ...

  • Barco r9010021 - page 67

    8. Im age Menu 8.2 Settings Overview • Contrast • Brightness • Color • T int (hue) • Sharpness • Gamma • Phase • Noise reduction What can be done? Correct image settings are impor tant for a good image reproduction. The image settings are made through a dialog box with a scroll bar . Minimal, maximal and the actual values are indica ...

  • Barco r9010021 - page 68

    8. Image Menu The higher the value, the higher the c ontrast. Or , click in the input box and enter the desired value with the numeric keys. Image 8-3 8.2.2 Brightne ss About Brightnes s The Brightness function is used to adjust the overall light output. How to change the Bri ghtness ? 1. Press MENU to activate the menu bar . (image 8-4) 2. Press ? ...

  • Barco r9010021 - page 69

    8. Im age Menu 8.2.3 Color About Color set ting The color function is used to adjust color saturation levels. How to change t he Color ? 1. Press MENU to activate the menu bar . (image 8-5) 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select settings . 5. Press → to pull down the menu. 6. U ...

  • Barco r9010021 - page 70

    8. Image Menu Image 8-6 8.2.5 Sharpness About Sharpness The sharpness function is used to adjust the image sharpness of video signals. How to change the sha rpness ? 1. Press MENU to activate the menu bar . (image 8-7) 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select settings . 5. Press ? ...

  • Barco r9010021 - page 71

    8. Im age Menu How to change the Gamma 1. Press MENU to activate the menu bar . (image 8-8) 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select settings . 5. Press → to pull down the menu. 6. Use ↓ or ↑ to select Gamma . 7. Press ENTER . A slider box appears. 8. Use ← or → to change ...

  • Barco r9010021 - page 72

    8. Image Menu 6. Use ↓ or ↑ to select Phase . 7. Press ENTER . A slider box appears. 8. Use ← or → to change the Phase and refine the ji tter . Or , click in the input box and enter the desired value with the numeric keys. Note: Don’t mix up with wrong number of total pixels. If the jitter doesn’t disappear with the phase adjustment, ch ...

  • Barco r9010021 - page 73

    8. Im age Menu Image 8-1 1 8.3 Aspect ratio Aspect ratio is greyed ou t when the Full Screen Representation function i n Display Setup is switch ed ON or when the Show Native Resolution function in Image is switched ON. What can be done ? The aspect ratio setting forces the projector to project an image using a defined aspect ratio Aspect ratio Des ...

  • Barco r9010021 - page 74

    8. Image Menu 4/3 5/4 16/9 Auto Video Signal Pal/Secam Video Signal NTSC Video Signal 16/9 RGB Signal Image 8 -12 Some examples for aspect ratio How to change th e Aspect rati o ? 1. Press MENU to activate the menu bar . (image 8-13) 2. Press → to select Image . 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select Aspect ratio . ...

  • Barco r9010021 - page 75

    8. Im age Menu Image 8- 13 How to set up a custom Aspect rat io ? 1. Press MENU to activate the menu bar . (image 8-14) 2. Press → to select Image . 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select Aspect ratio . 5. Press ↓ to select custom... . 6. Press ENTER to confirm. The Custom aspect ratio dialog box will be displayed ...

  • Barco r9010021 - page 76

    8. Image Menu 8.4 Show native resolution Show native resolu tion overrules the Fu ll Screen Representatio n function in Display Setu p . Show native resolutio n is greyed out for video signals. DMD Digital Micromirror Device What can be done The aim here is to always show the r esolution of the source independently of the resolution of the DMD pane ...

  • Barco r9010021 - page 77

    8. Im age Menu 6. Use ↓ or ↑ to sele ct On . 7. Press ENTER . A white bullet shows the selection. Image 8- 17 When Show Native Resolution is in the O N position, sc rolling of the im age is possible w ith the arrow keys on the remote c ontrol. 8.5 Keystone correction What can be done ? The Keystone adjustment is used to align the image, this c ...

  • Barco r9010021 - page 78

    8. Image Menu Image 8-19 Keystone Top Bottom 255 0 255 0 0 Image 8-20 8.6 Color T emperature What can be done ? The color temperature can be selecte d according to the type of source: There are 6 different preset color temperatures: • Projector white • computer : 9300 K • Video : 6500 K • Film : 540 0K • Broadcast : 3200 K • Custom Pres ...

  • Barco r9010021 - page 79

    8. Im age Menu 5. Press → to pull down the menu. 6. Use ↓ or ↑ to select the desired preset color temperature. 7. Press ENTER to confirm. The color temperature of the image is adapted and a white bullet shows the active setting in the menu bar . Image 8- 21 How to store a customer creat ed color temperat ure on Custom Preset? 1. Press MENU to ...

  • Barco r9010021 - page 80

    8. Image Menu x 200 0 1000 Image 8-23 Change between x and y w ith <COLOR> Image 8-24 the x and y coordinate change s between 0.00 and 1.00. For practical reason s, the values on the slider box are multiplied by 1000. How to sta rt up the cust om color te mperature ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image it ...

  • Barco r9010021 - page 81

    8. Im age Menu 8.7 Filmmode detection What can be done ? Some sources like common DVD material are derived from cinema 24 Hz sources ( 2/2 or 3/2 pull down method). The filmmode detection insures that these converted signals are shown without artefacts. This function m ay cause undesired effects on stan dard sources, therefo re it can be disabled ( ...

  • Barco r9010021 - page 82

    8. Image Menu 8.8 Blanking What can be done ? Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on the screen and to hide or black out unwanted information (or noise). A ’0’ indicates no blanking. Which blanking adjustmen ts are available ? • top blanking • bottom blanking • right ...

  • Barco r9010021 - page 83

    8. Im age Menu 7. Use the ↑ or ↓ keys to select To p , Bottom , Left or Right blanking and change the value with ← or → until the desired blanking is obtained. Or , use the ↑ or ↓ keys to select T op , Bottom , Left or Right blanking and press ENTER to change the value indication to a input field and enter a new value with the keyboard. ...

  • Barco r9010021 - page 84

    8. Image Menu In case of information contained in the amplitude of the si gnals which is the case of data color signals (R, G, B),i mage 8-33 , we are quite sure that the amplitude of these color signals is subject to alterations. An example of alteration may be a DC component added to the signal, in the form of a DC offset repositioning the black ...

  • Barco r9010021 - page 85

    8. Im age Menu Black level setting : brightness White level setting : contrast The same absolute black and white level for the three colors allow the same reference for Brightness and contrast control of the picture ! These two references also set the range i n which the ADC will work for that particul ar source (this explains also why each input b ...

  • Barco r9010021 - page 86

    8. Image Menu Black balanc e 1. Press MENU to activate the menu bar . 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select Input balance. 5. Press → to pull down the menu. 6. Use ↓ or ↑ to select Black ba lance. (image 8-38) 7. Adjust the red black level on a minimal value (image 8-39, i ...

  • Barco r9010021 - page 87

    8. Im age Menu 6. Use ↑ or ↓ to select Input balance. 7. Press → to pull down the menu. 8. Use ↓ or ↑ to select White balance. (image 8-41) 9. Adjust the Red white level (gain) on a minimal value. (image 8-42) 10. Adjust the blue white level (gain) on a minimal value Note: This minimal value is not necessary , provided that the 2 other co ...

  • Barco r9010021 - page 88

    8. Image Menu Input balance is also available for a component video source under following conditions: • A component video signal is present on the BNC’ s. • ”Data on BNC’s” is selected in the Source selection menu. • Pr/Y/Pb is selected in the Advanced menu of the corresponding image file. The procedure is the same as for a data sour ...

  • Barco r9010021 - page 89

    8. Im age Menu 5. Press → to pull down the menu. 6. Use ↓ or ↑ to enable or disable the AGC. 7. Press ENTER to confirm. (image 8-45) A white bullet shows the active setting. Image 8- 45 The AGC can be disturbing in cas e of Macrovision encoded signals, therefore t he AG C can be disabled (OFF) at any time 8.1 1 Manual Gain Control What can be ...

  • Barco r9010021 - page 90

    8. Image Menu Image 8-46 Image 8-47 86 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 91

    9. Tools M enu 9. T OOLS MENU Overview • Overview of the T o ols menu • Introduction to PiP • PiP se lect • PiP add window • PiP remove window • PiP layo ut •P i P A d j u s t 9.1 Ov erview of the T ools menu Overview • PiP se lect - Full-screen -2 b y 2 r a s t e r - PiP layout 1 - PiP layout 2 - PiP layout 3 • PiP add window ... ...

  • Barco r9010021 - page 92

    9. Tools Menu The different PiP configurat ions • Full screen 2 The full screen is used to display one of the selected sources. Browse through the sources with the PiP Adjust button on the remote control. •2 - b y - 2 r a s t e r 2 The screen is divided into 4 subscreens cont aining 1 Video, 2 Data sources and 1 SDI source. Image 9-1 • P i Pl ...

  • Barco r9010021 - page 93

    9. Tools M enu PiP dedicated buttons • PiP Adjust : this button allows to focus on one particular window, this window is shown with a white frame surrounding the selected window . A source identification box is displayed in the right lower corner . Image 9-2 Press PiP Adjust button to move the frame to the next window . This can also be done via ...

  • Barco r9010021 - page 94

    9. Tools Menu Image 9-3 9.4 PiP add window What can be done ? It is possible to add a window to the existing windows (maximum 4), therefore a source must be sel ected. Sources which are already used are not selectable. If for instance the PiP layout contains a component video then component video will be not selectable. Once added, the window may b ...

  • Barco r9010021 - page 95

    9. Tools M enu 9. Change the viewing order of the displayed images (z-order) with the ↑ and ↓ . (image 9-10) Image 9-5 Source selection Data on BNC's Video selector SDI DVI PC Image 9-6 Pip Wizard step 1 : Select the source you want to display in the w indow... Image 9-7 Pip Wizard step 2 : Resize this new window w ith ↑↓ ←→ Image ...

  • Barco r9010021 - page 96

    9. Tools Menu Image 9-1 1 Select window with <PiP ADJUST> → Press <ENTER> to rem ove Image 9-12 9.6 PiP layout Overview •P i P S a v e • PiP rename layout • PiP de lete layou t 9.6.1 PiP Save What can be done ? The active layout can be saved or "saved as". When a new layout is saved it is added to the PiP select menu. ...

  • Barco r9010021 - page 97

    9. Tools M enu Image 9-13 Save PiP layout Layout name: Full-screen Image 9-14 Message Current layout has been saved Press <ENTER> or <EXIT> to return Image 9-15 9.6.2 PiP rename layo ut What can be done ? T h en o nf i x e dl a y outs (factory and personal layouts) can be renamed . The maximal length of the name is 12 characters. A fixe ...

  • Barco r9010021 - page 98

    9. Tools Menu Rename PiP layout PIP Layout 1 PIP Layout 2 PiP Layout 3 Own layout 1 Own layout 2 Image 9-17 Rename PiP layout New name: Own layout 1 Image 9-18 9.6.3 PiP delete layout What can be done ? The non fixed layouts (factory and personal layouts) can b e deleted. The fixed layouts and the active layout can not be deleted How to delete a la ...

  • Barco r9010021 - page 99

    9. Tools M enu This can also be d one by using the de dicated PiP Adjust key on the RCU Image 9- 20 PiP adjust i n case of 2-by- 2 layout A Data1 window has the focus, new settings will only affect Data1 window B Video1 window has the focus, new settings will only affect Video1 window PiP adjust 1. Press MENU to activate the menu bar . 2. Press → ...

  • Barco r9010021 - page 100

    9. Tools Menu 96 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 101

    10. Signal menu 10. SIGNAL MENU Overview • Overview of the Signal menu • Switching mode • Output Frame rate • Background 10.1 Overview of the Signal menu Overview • Switching mode -S e a m l e s s -B o x i n - Box out - Shift in left - Shift in right - Shift in top - Shift in bottom - V ertical curtain open - V ertical curtain close - Hor ...

  • Barco r9010021 - page 102

    10. Signal menu Image 10-1 The Random mode will select a new sw itching mode at each sou rce switching i.e. there will ne ver be 2 suc- cessive source sw itchings with the sa me effect. The Seamless switching m ode is not used in the Random mode. Note on Fade in/out In some cases, depending on the sources to be switched, the fad e in/out effect is ...

  • Barco r9010021 - page 103

    10. Signal menu Image 10-2 * Video may be Composite video/ S-Video / SDI • dark arrow : fade in/out effect possible • dotted arrow : u ndetermined case, fade in/out effect may take place or not • striked out arrow : fade effect impossible The switching effects are o nly possible in the full screen mod e 10.3 Output Frame rate What can be done ...

  • Barco r9010021 - page 104

    10. Signal menu 4. Use ↑ or ↓ to select Output frame rate. 5. Press → to pull down the menu. 6. Use ↑ or ↓ to select the desired frame rate. The following choices are possible: - synchronous : the output follows the input frame rate. - 50 Hz : output is always displayed with a frame rate of 50 Hz - 60 Hz : output is always displayed with ...

  • Barco r9010021 - page 105

    11. Lam ps Men u 1 1. LAMPS MENU Overview • Overview of the Lamps m enu • Runtimes • Mode • Economic ON/OFF • Runtime warning 1 1.1 Overview of the Lamps menu Overview • Runtimes... • Mode - Single... - Dual... • Economic • Runtime warning 11 . 2 R u n t i m e s How to display the lamp runti mes ? 1. Press MENU to activate the men ...

  • Barco r9010021 - page 106

    11. Lamps Menu 1 1.3 Mode Single lamp mode The projector will always switch to the lamp with the shortest r untime when the difference between the runtimes of lamp 1 and lamp 2 reaches 100 hours , switching from one lamp to another happe ns only at switching on of the projector and not during operation. When the lamp fails or reaches its maximum r ...

  • Barco r9010021 - page 107

    11. Lam ps Men u Image 1 1-4 When switching from th e dual mode to the single mode the lamp with the longest runtim e is switched off. If the runtimes are equal (if the projecto r has always been operated in dual mode) the n lamp 1 is switched out. When switching to singl e mode, returning to the dual mode will no t be possible in the first 60 seco ...

  • Barco r9010021 - page 108

    11. Lamps Menu 4. Use ↑ or ↓ to sele ct Runtime warning. 5. Press ENTER to confirm. A dialog box is displayed. (image 1 1-7) 6. Press ENTER to activate the input field. 7. Use ← or → to change the runtime warning setting. Or , enter the desired value with the digit keys on the remote control. 8. Press Back to return. Image 1 1-6 Lamp runtim ...

  • Barco r9010021 - page 109

    12. Image File s Menu 12. IMAGE FILES MENU Overview • Overview of the Image Files Menu • Introduction to image files • Load file • File selection • Auto Image • Edit file • Rename file • Copy • Delete • Automatic load • Zoom-Focus 12.1 Overview of the Image Files Menu Overview • Load • File selection -F i t -A l l • Auto ...

  • Barco r9010021 - page 110

    12. Image File s Menu Possible file mani pulations The possible file manipulations are : • Load : insta llation of a file for a new source • Edit : editing a loaded file to match the source specifications • Rename : renaming a file • C o p y: c o p y i n gaf i l et oan e wf i l e • Delete : deleting an existing file 12.3 Load f ile H o wt ...

  • Barco r9010021 - page 111

    12. Image File s Menu What to do if the image is not pe rfect ? If the displayed image is not correct after AutoImage or after selecti ng the best fitting file, go to the Edit menu, select the active file and change the settings. 12.4 File sele ction How to se t the filte r ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image ...

  • Barco r9010021 - page 112

    12. Image File s Menu Image 12-4 The Auto Image s etup in the Display setup menu affect only Auto Image if it is launched via th e RCU key or at automatic file creation. Launching Au toImage via the menu involves complete c hecking of all parameters. Auto Image can a lso be launched via the R CU with the dedica ted AutoImage key . 12.6 Ed it file O ...

  • Barco r9010021 - page 113

    12. Image File s Menu Image 12-5 Edit custom file Video625.c01 Video625.c02 Active files: Video625.c01 Image 12-6 Edit custom file Name Horizontal: Vertical: 680 20 0 560 8 576 720 Advanced Video625.c01 total active start period total active start Image 12-7 It is recommended to use the d efault values. 12.6.2 Correct fi le parameters What is alrea ...

  • Barco r9010021 - page 114

    12. Image File s Menu Advanced edit Comb filter On Off AGC hold interval Short Long Sync locking Slow Fast Sharpness Coarse Fine Image 12-8 video signal video signal frame blanking HI egalisation Image 12-9 HI AGC Hold interval The Comb filter is by default enabled. The AGC hold interval is t he time interval in which the AGC is inhibited (AGC hold ...

  • Barco r9010021 - page 115

    12. Image File s Menu • a progressive signal (32 kHz frequency video signal ) is connected to the BNC’ s (select the source with Data on BNC’s in the Source selection menu). • one wants (in PiP mode) to visualize the comp onent video signal in a Data window hereby adding a video image in the PiP layout. -HDTV-PR/Y/PB for high definition com ...

  • Barco r9010021 - page 116

    12. Image File s Menu 12.8 Copy How to copy a file ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image files item. (image 12-15) 3. Press ↓ to pull down the Image files menu. 4. Use ↑ or ↓ to select copy . 5. Press ENTER to confirm. A dialog box is displayed. (image 1 2-16) 6. Use ↑ or ↓ to select the desired file. ...

  • Barco r9010021 - page 117

    12. Image File s Menu How to delete a fi le ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image files item. (image 12-18) 3. Press ↓ to pull down the Image files menu. 4. Use ↑ or ↓ to select delete. 5. Press ENTER to confirm. A dialog box is displayed. (image 1 2-19) 6. Use ↑ or ↓ to select the desired file. 7. Pr ...

  • Barco r9010021 - page 118

    12. Image File s Menu On The projector will switch the file when the source settings ch ange. Off The projector stays on its active file even w hen the settings of the source change. Image 12-20 12.1 1 Zoom-Focus The Zoom-Fo cus setting is only valid wh en the projector is equip ped with TLD lenses . What can be done ? When TLD lenses are used, it ...

  • Barco r9010021 - page 119

    13. Display Se tup 13. DISPLA Y SETUP Overview • Startup screen •T e x t B o x • T ake screensho t • Menu bar position • Status bar position • Sliderbox position • Auto Image Setup • Scenergix 13.1 Startup screen What can be done ? When the startup scre en is enabled, the identification screen is displayed for a few seconds at start ...

  • Barco r9010021 - page 120

    13. Display Setup 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select T extbox . 5. Press → to pull down the menu. 6. Use ↓ or ↑ to enable/disable the textbox. 7. Press ENTER . Image 13-2 T o enable the menus and dial og boxes again, press the TEXT button on th e RCU. 13.3 T ak e screenshot What can be done ? A scree ...

  • Barco r9010021 - page 121

    13. Display Se tup Take screenshot This will erase y our current logo Are you sure to proceed? YES NO Image 13-4 Override message Screenshot Erasing logo Saving logo Image 13-5 Screenshot Erasing logo Saving logo Image 13-6 13.4 Menu bar position What can be done ? The menu bar can be centered vertically . The range is from the top of the screen to ...

  • Barco r9010021 - page 122

    13. Display Setup 13.5 Status ba r position What can be done ? The status bar (wizard menu) can be centere d vertically . The rang e is from the bottom of the screen to the middle of the screen. Image 13-9 Status bar positio n This is useful in applications where the bottom image content is not displayed (e.g. due to blanking). How to center the me ...

  • Barco r9010021 - page 123

    13. Display Se tup Image 13-1 1 Sliderbox position X position : 619 Y position : 618 Press <ENTER> for fine adjustment Image 13-12 There is a coarse and a fine adjustment of the positio n, use ENTER (when sliderbo x is displayed) to switch between th e two. 13.7 Auto Image Setup What can be done ? Auto image allows to detect automatically the ...

  • Barco r9010021 - page 124

    13. Display Setup Image 13- 13 Image 13-14 How to perform Au to Image ? 1. press Auto Image on the RCU A text box showing a progress bar is displayed. (image 13-15) Imag e 13-15 Duri ng the AUT O IMAGE measuring p rocess the data source disappears t emporarily . 13.8 Scenergix Overview • Introduction • Preparations • ScenergiX overlap zone (h ...

  • Barco r9010021 - page 125

    13. Display Se tup 13.8.1 Introduct ion Why Sce nergiX ? When working in a multichannel setup the BARCO RLM G5 and its Soft Edge possibilities enable an image blending that gives t he appearance of a single view , thus achieving realistic immersion for the majority of wide screen applications. Image 13-16 Why Soft Edge? What is the Basic Principal ...

  • Barco r9010021 - page 126

    13. Display Setup 13.8.3 ScenergiX overlap zone (horizont al scenergix) Definiti ons Image 13-18 Scenergix set up Overlap : number of pixels that overlap Horizontal resolution of 1 projector : 1024 for Graphics versions, 12 80 for Reality versions, 1400 for SXGA p rojectors. T otal horizontal screen resolution : [ (horizont al resolution of 1 proje ...

  • Barco r9010021 - page 127

    13. Display Se tup 13.8.4 ScenergiX overlap zone (ve rtical scenergi x) Definiti ons Image 13-19 Scenergix overl ap zone vertical Overlap : number of pixels that overlap V ertical resolution of 1 projector : 768 for Gra phics versions, 1024 for Reality versions, 1050 for SXG A projectors. T otal vertical screen resolution : [ (V ertical resolution ...

  • Barco r9010021 - page 128

    13. Display Setup 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select ScenergiX . 5. Press → to select the ScenergiX item. 6. Use ↑ or ↓ to select Border . 7. Press ENTER to select. A dialog box will be displayed. The actual scenergix border will be displayed. 8. Use ↑ or ↓ to select the desired adjustment. Image ...

  • Barco r9010021 - page 129

    13. Display Se tup Image 13- 22 Width set up for projector 1 Image 13- 23 Width set up for projector 2 Adjusting by ent ering the exact va lues. 1. When on an adjustable item, the input box background will be colored. Press ENTER . The value will change to a 3 digit value and the first digit is selected. 2. Enter a value with the digit keys on the ...

  • Barco r9010021 - page 130

    13. Display Setup 2. Press → to select t he Display setup item. (image 13-24) 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select ScenergiX . 5. Press → to select the ScenergiX item. 6. Use ↑ or ↓ to select Black level . 7. Press ENTER to select. A dialog box will be displayed on a black level background. Adjust th ...

  • Barco r9010021 - page 131

    14. Installation menu 14. INST ALLA TION MENU Overview • Lens adjustments • Projector address • Orientation • Language • Quick access keys • RS232 baudrate • Automatic startup • Security 14.1 Lens adjustments What can be done ? Motorized lenses can be adjusted in the installation menu or via the dedicated keys on the remote (see cha ...

  • Barco r9010021 - page 132

    14. Installation menu Image 14-1 Lens adjustment Use ↑ and ↓ for zoom Use ← and → for focus Press <enter> for SHIFT mode Press <LOGO> or <LENS> for test pattern Image 14-2 Lens adjustment Use ↑ and ↓ for vertical shift Use ← and → for horizontal shift Press <enter> for ZOOM/FOCUS Press <LOGO> or <LEN ...

  • Barco r9010021 - page 133

    14. Installation menu Image 14-4 Image 14-5 Image 14-6 How to change the common address ? 1. Press MENU to activate the menu bar . 2. Press → to select the Installation . (image 14-7) 3. Press ↓ to pull dow nt h e Installation menu 4. Use ↑ or ↓ to select Projector address 5. Press ENTER A dialog box appears on the screen. Use the ↑ to sc ...

  • Barco r9010021 - page 134

    14. Installation menu 14.3 Orientation Projector orientat ions Depending on how the projector is oriented, the projector ’s inter nal settings have to be adapted. See also Chapter “Installation”, “Orientation” . How to change the orien tation ? 1. Press MENU to activate the menu bar . 2. Press → to select the Installation item. (image 1 ...

  • Barco r9010021 - page 135

    14. Installation menu Image 14-1 1 14.5 Quick access keys What can be done ? The 3 function keys on top of the RCU (F 1, F2 and F3) can be associated with a particular item in one of the me nus. Each function which is not password protected c an be associated to a function key . How to get an overview of the quick access key s ? 1. Press MENU to ac ...

  • Barco r9010021 - page 136

    14. Installation menu The menu item is stored behind the quick access key . Th e message Q uick Access key stored will be displayed. 14.6 RS232 baudrate How to change the baudrat e? 1. Press MENU to activate the menu bar . 2. Press → to select the Installation item. (image 14-14) 3. Press ↓ to pull down the Installation menu. 4. Use ↑ or ↓ ...

  • Barco r9010021 - page 137

    14. Installation menu On Automatic startup enabled Off Automatic startup disabled 7. Press ENTER to confirm. Image 14-15 14.8 Security What can be done ? A security function is implemented in the projector that allows a protection against theft. A PIN code allows the user to lock the projector in case of wrong code entry . The PIN code must be en t ...

  • Barco r9010021 - page 138

    14. Installation menu A dialog box is displayed. Enter the PIN code, and confirm the newly entered PIN code. (image 14-19) An informative text box is then displayed. Press ENTER or B ACK to escape. (image 14-20) Image 14- 16 Security Activating the security mode involves the following things: - The startup screen (identification window ) will conta ...

  • Barco r9010021 - page 139

    14. Installation menu Image 14-21 R5976629 BARC ORLM G5 02/06/200 6 135 ...

  • Barco r9010021 - page 140

    14. Installation menu 136 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 141

    15. Service 15. SER VICE Overview • V ersion T able • Lamps and Power supp ly • Board Identification • Diagnostics • Formatter firmware • Formatter reset 15.1 V ersion T able What is possible ? T o get an overview of the different software and firmware version inside the projector . How to get t he version t able 1. Press MENU to activa ...

  • Barco r9010021 - page 142

    15. Service How to get the l amps and power suppl y overvi ew ? 1. Press MENU to activate the menu bar . (image 15-3) 2. Press → to select the Service item . 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Lamps and Power supply ... . 5. Press ENTER . An list dialog box opens. (image 15-4) Image 15-3 Image 15-4 15.3 Board Identifi ...

  • Barco r9010021 - page 143

    15. Service Image 15-5 Image 15-6 15.4 Diagnostics Overview • I²C Diagnostics • Lamps and power su pply 15 .4.1 I² C Diagnosti cs Wh at can be done ? The I 2 C bus allows the diagnostic of different hardware components How to display t he diagnostics menu ? 1. Press MENU to activate the menu bar . 2. Press → to select the Servi ce item. (im ...

  • Barco r9010021 - page 144

    15. Service Image 15-7 I2C Diagnostics Device Slave address Lamp driver I2C Diagnostics 0x78 Lamp Eeprom 0xA0 Power Supply 0x30 I2C Mulitplexer 0xE0 Red Formatter 0x34 Green Formatter 0x36 Blue Formatter 0x38 Motor driver 0x1A Image 15-8 15.4.2 Lamps and power supply What can be done ? This menu item gives an overview of the lamp and power supply e ...

  • Barco r9010021 - page 145

    15. Service Image 15-10 15.5 Formatter firmware How to di spla y ? 1. Press MENU to activate the menu bar . (image 15-1 1) 2. Press → to select the Service item . 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Formatter firmware... . 5. Press ENTER . An options dialog box opens. (image 15-12) Image 15-1 1 Image 15-12 15.6 Formatt ...

  • Barco r9010021 - page 146

    15. Service How to di spla y ? 1. Press MENU to activate the menu bar . (image 15-13) 2. Press → to select the Service item . 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Formatter reset... . 5. Press ENTER . An confirmation dialog box opens. (image 15-14) Image 15- 13 Image 15-14 142 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 147

    16. Adjustment menu (check up) 16. ADJUSTMENT MENU (CHECK UP) Overview • Internal patterns • Convergence •M o r e . . All items in the adjus tment menu are given f or check up. No ad justments are pos sible. 16.1 Internal patterns How to s elect ? 1. Press MENU to activate the menu bar . 2. Press → to select the Adjustment item. (image 16-1 ...

  • Barco r9010021 - page 148

    16. Adjustment menu (check u p) 16.2 Convergence Only for check up of the c onvergence, no adjustm ent is possible in the field. When a co nvergence problem occurred, contact a Barco service center. How to s elect ? 1. Press MENU to activate the menu bar . 2. Press → to select the Adjustment item. (image 16-2) 3. Press ↓ to pull down the Adjust ...

  • Barco r9010021 - page 149

    A. Standard Ima ge Files A. ST ANDARD IMAGE FILES A.1 T able overvi ew T able overvi ew The following standard image files are pre-programmed in the projector . Name 4 Resolution 5 Fvert Hz 6 FHor kHz 7 Fpix MHz 8 Ptot 9 Pact 10 Ltot 11 Lact 12 1600_48V 1600x600i 48,040 62,500 135,000 2160 1600 651 600 CGA 640x200i 59,924 15.700 14.318 912 640 262 ...

  • Barco r9010021 - page 150

    A. Standard Ima ge Files Name 4 Resolution 5 Fvert Hz 6 FHor kHz 7 Fpix MHz 8 Ptot 9 Pact 10 Ltot 11 Lact 12 hd_30p 1920x1080 30,000 33,750 74,000 2200 1920 1 125 1080 hd_60p 1280x720 60,000 45,000 74,000 1650 1280 750 720 INTER_GR 1 184x886 6 7,170 61,796 92,941 1504 11 8 4 920 886 IQPC_SXGA_2 1366x1024 59 62,933 106,230 1688 1366 1067 1024 IQPC_S ...

  • Barco r9010021 - page 151

    A. Standard Ima ge Files Name 4 Resolution 5 Fvert Hz 6 FHor kHz 7 Fpix MHz 8 Ptot 9 Pact 10 Ltot 11 Lact 12 S1600_67 1600x1280 67 89,286 200,000 2240 1600 1334 1280 SDI_625 675x278i 25,000 15,625 13,500 864 720 313 278 SDI_525 675x240i 29,970 15,734 13,500 858 720 263 240 SG_50 1600x1200 50,000 62,500 130,313 2085 1600 1250 1200 SG_60_1 1280x1024 ...

  • Barco r9010021 - page 152

    A. Standard Ima ge Files Name 4 Resolution 5 Fvert Hz 6 FHor kHz 7 Fpix MHz 8 Ptot 9 Pact 10 Ltot 11 Lact 12 SXGA+_60 1280x1024 60 63,980 107,997 1688 1280 1066 1024 SXGA2_60 1280x960 60 59,999 107,998 1800 1280 1000 960 SXGA2_85 1280x960 85 85,940 148,505 1728 1280 101 1 960 SXGA50 1280x1024 50 52,351 88,368 1688 1280 1047 1024 SXGA60v 1280x1024 6 ...

  • Barco r9010021 - page 153

    A. Standard Ima ge Files Name 4 Resolution 5 Fvert Hz 6 FHor kHz 7 Fpix MHz 8 Ptot 9 Pact 10 Ltot 11 Lact 12 XGA_75_1 1024x768 75 60,024 78,752 1312 1024 800 768 XGA_75_2 1024x768 76 61,080 86,000 1408 1024 806 768 XGA_85 1024x768 85,000 68,680 94,500 1376 1024 808 768 XGA_EOS 1024x768 63,000 50,000 67,200 1344 1024 796 768 XGA75_GS 1024x768 74,534 ...

  • Barco r9010021 - page 154

    A. Standard Ima ge Files 150 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 155

    B. Maintenance of t he Projector B. MAINTENANCE OF THE PROJECT OR B.1 Air Filters About m aintain ing the air f ilters It is recommended that you replace the a ir filters (located at the bottom of the projector) when you replace the lamp - or sooner, in dusty or dirty environment. I n the latter case, check monthly if replacement is required. A clo ...

  • Barco r9010021 - page 156

    B. Maintenance of the Projector A B Image B-2 C Image B-3 A vailabl e kit All the 5 air filters are assembled to 1 kit, order number R401045K 152 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 157

    C. Specifications C. SPECIFICA TIONS C.1 BARCO RLM G5 specifications Overview Light Out put 4000 ANSI Lumen Resolution 1024 x 768 (native) Contrast ratio 900 : 1 (full field) Brightness uniformity > 90% Lamp 2 x 250 W mercury max. lifetime: 1500 hrs typ. lifetime: 1000 hrs min. lifetime: 750 hrs Noise level (@ 20°C - 68°F) <4 2d B a Noise l ...

  • Barco r9010021 - page 158

    C. Specifications Input source co mpatibility 1600 x 1200 (max. input) Shift Range Lens Shift Range RLD 0.8 up-down: 25<>25 left-right: 20<>20 Other RLD up-dow n: 100<>10 left-right: 75<>75 TLD HB 0.8 u p-down: 60<>35 left-right: 50<>50 Other TLD HB up-down: 120<>25 left-right: 75<>75 Throw Ratio Lens ...

  • Barco r9010021 - page 159

    Gloss ary GLOSSAR Y 2:2 pull-down The process of transferring 24-frames/sec film format into video by repeating each frame (used for P AL DVD’s) as t wo video fields. (A D) 3:2 pull-down Method used to map the 24 fps of film onto the 30 fps (60 fields) o r 25 fps (50 fields), so that one film frame occupies thre e video fields, the next two, etc. ...

  • Barco r9010021 - page 160

    Gloss ary Projector address Address installed in the projector to be individually controlled. SDI Serial Digital Interface Vide o Se lec to r The Video Selector is a graphical interface which all ows an over view of the different video inputs (Composite Video and S-Video) and whether they are active (signal connected) or not as well as the selectio ...

  • Barco r9010021 - page 161

    Index INDEX A Address 40–41, 128 Program 41 RCU 41 Projector address 128 setting 40 Adjustment 42–44 Lens 42–44 Remote Control 44 Via Menu Bar 43 With Control buttons 42 Adjustments 127 Lens 127 AGC 84 AGC on Vid eo 84 Air filters 151 Aspect ratio 69 Auto Image 107, 1 19 Setup 1 19 Automatic load 1 13 B Background 99–100 Brightness 64 C Cle ...

  • Barco r9010021 - page 162

    Index S-Video input 25 SDI 28 Input balance 79, 81–83 Adjust 81 Black balance 82 Introduction 79 White balance 82 YPrPb sigals 83 Input source connections 29–31 Extended configuration 29–31 5-cable 29 Introduction 29 S-Video 30 Summarizing 31 Installation 127 Installation guidelines 1 1–12 Projector Configuration 12 Installation Guidelines ...

  • Barco r9010021 - page 163

    Index Overview 87 PiP 87 PiP add window 90 PiP Adjust 94 PiP delete layout 94 PiP layout 92 PiP remove window 91 PiP rename layout 93 PiP Save 92 PiP select 89 Using the dialog boxes 48 Using the menu 47 Menu bar position 1 17 Menu structure 47–48 Getting used with 47 Start up 47 Using the dialog boxes 48 Using the menu 47 N No signal 99–100 Ba ...

  • Barco r9010021 - page 164

    Index T int 65 T ools menu 87, 89 Overview 87 PiP 87 Introduction 87 PiP select 89 V Video 24–25 Composite Video 24 S-Vi deo 25 Z Zoom-Focus setting 1 14 160 R5976629 BAR CORLM G5 02/06/2006 ...

  • Barco r9010021 - page 165

    Revision Sheet To : Barco nv Even ts/Documenta tion Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: service.media_and_entertainmen t.emea@barco.com, Web: ww w .barco.com From: Date: Please correct the following points in this documentation ( R5976629/05 ): page wrong correct R5976629 B ARCO RLM G5 02/06/2006 ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco r9010021 can be divided into several groups. They are, among others:
- Barco technical drawings
- r9010021 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco r9010021
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco r9010021.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco r9010021, service manual, brief instructions and user manuals Barco r9010021. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco r9010021.

Similar manuals

A complete manual for the device Barco r9010021, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco r9010021 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco r9010021.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco r9010021 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco r9010021, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco r9010021, that we can find in the current document
3. Tips how to use the basic functions of the device Barco r9010021 - which should help us in our first steps of using Barco r9010021
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco r9010021
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco r9010021 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco r9010021?

Use the form below

If you did not solve your problem by using a manual Barco r9010021, ask a question using the form below. If a user had a similar problem with Barco r9010021 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)