Manual HP 39gs

314 pages 9.85 mb
Download

Go to site of 314

Summary
  • HP 39gs - page 1

    HP 3 9gs gr aphing calc ulato r user's guide Ed i t io n 3 P a rt Number F2 2 2 3AA-9 0001 HP 39gs English. book Page i Wed nesday, December 7, 2 005 11:24 PM ...

  • HP 39gs - page 2

    Notice REG ISTER Y OUR PRODU CT A T: w ww .register .hp.com TH IS MANUAL AND ANY EXAMPLE S CONT AI NED HEREIN ARE PRO VIDED “ AS IS” AND ARE SUBJECT T O CHANG E WITHOUT NO TICE. HEWLETT-P A CKARD COMP ANY MAKES N O W AR- R ANTY O F ANY KIND WITH REGARD T O TH IS MANU AL , INC L UDING , B UT NO T L IMI TE D T O , TH E IM P LIE D W AR RAN T IES O ...

  • HP 39gs - page 3

    i Contents Preface Manual conventions ............. ................ ................ ................. P-1 Notice .. ................. ................ ................ ................. ............. P-2 1 Getting started On/off, cancel o perations ........ ................ ................. ............. 1-1 The display ............... ......... ...

  • HP 39gs - page 4

    ii 3 Function aplet About the Function aple t ................. ............. ................ .......... 3-1 Getting started w ith the Function aplet ................ ................ 3-1 Function aplet intera ctive analysis ....... .................... ................ 3-9 Plotting a pie cewise-defined function ..... ................ ........... ...

  • HP 39gs - page 5

    iii Exploring the graph ...... ................ ................ ................ 10-19 Calculating pre dicted values ....... ................ ................ ... 10-20 11 Inference aplet About the Inference a plet ............ ................. ................ ........ 11-1 Getting started with the Inference aplet ..................... ........ ...

  • HP 39gs - page 6

    iv Two-variab le statistic s ............. ............. ................ ......... 13-17 Symbolic functions .... ................... ................. ............... 13-17 Test functions ......... ................ ............. ................ ......... 13-18 Trigonom etry functions ......... ................ ................ ......... 13-19 Sym ...

  • HP 39gs - page 7

    v Using programs ................... ................ ................ ............... 18-7 Customiz ing an aplet ............ ................ ............. ................ .. 18-9 Aplet naming convention .................. ................ ............. 1 8-10 Example ......... ................ ................ ................ ............. 18- ...

  • HP 39gs - page 8

    vi Polar aplet variable s .............. ................ ................ .......... R-9 Sequence aplet variables ........... ................ ................. .... R-10 Solve aplet variab les .............. ................ ................ ........ R-11 Statistic s aplet variables ................ ................. ............. .... R-12 MATH ...

  • HP 39gs - page 9

    P-1 Pr eface The HP 39gs is a feature-rich graphing calculator. It i s also a powerful mathematics learning tool. The HP 39gs is designed so that you can use it to explore mathematical functions and their prop erties. You can get more information on the HP 39gs from Hewlett-Packard’s Calcula tors web site. You can download customized aplets from ...

  • HP 39gs - page 10

    P-2 Notice This manual and any examples contained herein are provided as-is and are subject to change without notice. Except to the extent prohibit ed by law, Hewlett-Packard Company makes no express or implied warranty of any kind with regard to this manu al and specific ally disclaims the implied warranties and conditions of merchantability and f ...

  • HP 39gs - page 11

    Getting started 1-1 1 Get ting star ted On/off, cancel operations To turn on Press to turn on the calculator. To cancel When the calculator is on, the key cancels the current operation. To turn off Press OFF to turn the calculator off. To save power, the calculator turns itself off after sev eral minutes of inactivity. All stored and displayed info ...

  • HP 39gs - page 12

    1-2 Getting started The display To adjust the contrast Simultaneously press and (or ) to increase (or decrease) the contrast. To clear the display • Pr ess CANCEL to c lear the edit line . • Pr ess CLEA R to c lear the edit line and the display history . Parts of the display Menu key or soft key labels. T he labels f or the menu k e ys ’ cur ...

  • HP 39gs - page 13

    Getting started 1-3 Annunciators . Annunciators are sy mbols that appear above the title bar and give you important status information. The keyboard Menu keys Annunciator Description Shift in effect for next keystrok e. To cancel, press again. α Alpha in effect for next keystroke. To cancel, press again. (( • )) Low battery power. Busy. Data is ...

  • HP 39gs - page 14

    1-4 Getting started • On the calc ulator k e y boar d, the top r ow of k ey s are called menu k ey s . The ir meanings depend on the conte xt—that’s w h y their to ps ar e blank . The menu k e y s ar e sometimes called “ so ft k ey s ” . • T he bottom line o f the displa y sho ws the la bels f or the menu k ey s ’ c u r r ent meanings ...

  • HP 39gs - page 15

    Getting started 1-5 Entry/Edit keys The entry and edit keys are: K e y Meaning ( CANCEL ) Cancels the current operation if the calculator is on by pressing . Pressing , then OFF turns the calculator off. Accesses the function printed in blue above a key. Returns to the HOME view, for performing calculations. Accesses the alphabetical characters pri ...

  • HP 39gs - page 16

    1-6 Getting started Shifted ke ystrokes There are two shift keys that you use to access the operations and characters printed above the keys: and . CHARS Displays a menu of all available characters. To type one, use the arrow keys to highlight it, and press . To select multiple character s, select each and press , then press . K e y Meaning (Contin ...

  • HP 39gs - page 17

    Getting started 1-7 HELPWITH The HP 39gs built-in hel p is available in HOME only. It provides syntax help for bu ilt-in math functions. Access the HELPWITH command by pressing SYNTAX and then the math key for which you require syntax help. Example Pr ess SYNTAX Note: R emo ve the left par enthesis fr om built -in func tio ns such a s sine , cosine ...

  • HP 39gs - page 18

    1-8 Getting started • Pr essing displa y s a menu of ph y sical constants f r om the f ields o f chemistry , phy sic s, and quantum mec hanic s. Y ou can u se these consta nts in calc ulati ons . (See “Ph ysi cal constants ” on page 13- 2 5 f or mor e inf or mation .) • Pr essing tak es yo u to the beginning of the MA TH men u . See “Math ...

  • HP 39gs - page 19

    Getting started 1-9 • If ther e are tw o columns , the left column sho ws gener al categori es and the righ t column sho w s spec ifi c cont ents w ithin a catego ry . Hi ghligh t a gener al category in the left column, then hi ghligh t an item in the r ight column. T he list in the ri ght column c hanges w hen a diffe r ent catego ry is highligh ...

  • HP 39gs - page 20

    1-10 Getting started Mode settings You use the Modes inpu t form to set the modes for HOME. HINT Although the numeric setting in Modes affects only HOME, the angle setting controls HOME and the current aplet. The angle setting selecte d in Modes is the angle setting used in both HOME and current aplet. To further configure an aplet, you u se the SE ...

  • HP 39gs - page 21

    Getting started 1-11 Setting a mode This example demonstrates how to change the angle measure from the default mode, radians, to degrees for the current aplet. The procedure is the s ame for changing number format and decimal mark modes. 1. Pr ess MODES t o o p e n t h e H O M E M O D ES i n p u t form. Engineering . Displays result wit h an expone ...

  • HP 39gs - page 22

    1-12 Getting started T he cur sor (hi ghlight) is in the fir st f ield , Angle Measur e . 2 . Pr ess to display a li st of choic es. 3. P re s s to select Degrees , and pr ess . The angle mea sur e changes to degrees . 4. Pr ess to r eturn to HOME . HINT Whenever an input form has a list of choices for a field, you can press to cycle through them i ...

  • HP 39gs - page 23

    Getting started 1-13 symbolic views of the aplets in the following table. See “Aplet view configuration” on page 1 -18 for further information. In addition to these aplets, wh ich can be u sed in a variety of applications, the HP 39 gs is supplied with two teaching aplets: Quad Explorer and Trig Explorer. You cannot modify configurati on settin ...

  • HP 39gs - page 24

    1-14 Getting started charge and transferred to the HP 39gs using the provided Connectivity Kit. Quad Explorer aplet The Quad Explorer aplet is used to investigate the behaviour of as the values of a , h and v change, both by manipulati ng the equation and seeing the change in the graph, and by manipulating the grap h and seein g the chang e in the ...

  • HP 39gs - page 25

    Getting started 1-15 Trig Explorer aplet The Trig Explorer aplet is used to investigate the behaviour of the graph of as the values of a , b , c and d change, both by manipulating the equation and seeing the change in the graph, or by manipulating the graph and seeing the change in the equation. Press , select Trig Explorer , and then press to disp ...

  • HP 39gs - page 26

    1-16 Getting started Aplet library Aplets are stored in the Aplet library. To open an aplet Press to display the Aplet library me nu. Select the aplet and press or . From within an aplet, you can return to HOME any time by pressing . Aplet views When you have configured an aplet to define th e relation or data that you want to explore, you c an dis ...

  • HP 39gs - page 27

    Getting started 1-17 Numeric view Press to dis play the aplet’s Numeric view. In this view, the functions that you have defined are displayed in tabular format. See “About the numeric view” on page 2 -16 for further information. Plot-Table view The VIEWS menu contains the Plot-Table view. Select Plot-Table Splits the screen into the plot and ...

  • HP 39gs - page 28

    1-18 Getting started Note view Press NOTE to display the aplet’s note view. This note is transferred with the aplet if it is sent to another calculator or to a PC. A note view contains text to supplement an aplet. See “Notes and ske tches” on page 17-1 for further information. Sketch view Press SKETCH to dis play the ap let’s sk etch view . ...

  • HP 39gs - page 29

    Getting started 1-19 To change views Each view is a separate environment. To ch ange a view, select a different view by pressing , , keys or select a view from the VIEWS menu. To change to HOME, press . You do not explicitly close the current view, you just ente r another one—like passing from one room into another in a house. Data that you enter ...

  • HP 39gs - page 30

    1-20 Getting started Example Calculate : Long results If the result is too long to fit on the display line, or if you want to see an expression in textbook format, press to highlight it and then press . Negative numbers Type to start a negative number or to insert a negative sign. To raise a negative number to a power, enclose it in parentheses. Fo ...

  • HP 39gs - page 31

    Getting started 1-21 However, for clarity, it is better to include the multiplication sign where you expect multiplication in an expression. It is clearest to enter AB as A*B . HINT Implied multiplication will not always work as expecte d. For example, entering A(B+4 ) will not give A*(B+4) . Instead an error message is displayed: “I nvalid User ...

  • HP 39gs - page 32

    1-22 Getting started Algebraic precedence order of evaluation Functions within an expression are evaluated in the following order of precedence. Functions with the same precedence are evaluated in order from left to right. 1. E xpressions w it hin parenthe ses. Neste d p ar ent heses ar e ev aluated fr om inner to outer . 2 . Pr efi x functio ns, s ...

  • HP 39gs - page 33

    Getting started 1-23 When you highlight a previous input or result (by pressing ), the and menu labels appear. To copy a previous line Highlight the line (press ) and press . The number (or expression) is co pied into the e dit line. To reuse the last result Press AN S (last answer) to put the last result from the HOME display into an expression. A ...

  • HP 39gs - page 34

    1-24 Getting started HINT When you retrieve a number from ANS , you obtain the result to its full precision. When you retrieve a number from the HOME’s display history, you obtain exactly what was displaye d. Pressing evaluates (or re-evaluates) the last input, whereas pressing ANS copies the last result (as ANS ) into the edit line. Storing a va ...

  • HP 39gs - page 35

    Getting started 1-25 Accessing the display history Pressing enables the highlight bar in the display history. While the highlight bar is active, the following menu and keyboard keys are very useful: Clearing the display history It’s a good habit to cl ear the display his tory ( CLEAR ) whenever you have finish e d working in HOME. It saves calcul ...

  • HP 39gs - page 36

    1-26 Getting started 2 . Select Number Format , pr ess to display the optio ns, and hi ghlight Fract ion or Mixed Fraction . 3 . Pr ess to sele ct the Number F ormat option , then mo ve to the prec ision value field . 4. Enter the prec ision v alue that yo u want to us e , and pr ess to set the pr ecisi on . Pres s to retur n to HOME . See “Setti ...

  • HP 39gs - page 37

    Getting started 1-27 • Pr ec ision set to 1: • Pr ec ision set to 2 : • Pr ec ision set to 3: • Pr ec ision set to 4 Fraction calculations When entering fractions: • Y ou use the ke y to separate the numerator part and the denominator par t of the fr action. • T o ent er a mi xed f r acti on , f or e x ample , 1 1 / 2 , you enter it in ...

  • HP 39gs - page 38

    1-28 Getting started 2. E n t e r t h e c a l c u l a t i o n . 32 3 45 7 8 Note: Ensur e y ou ar e in the HOME v ie w . 3 . E valuat e the calc ulation . Note that if you had selected Mixed Fraction instead of Fraction as the Number format, the answer would have been expressed as 25+7/8. Converting decimals to fractions To convert a decimal value ...

  • HP 39gs - page 39

    Getting started 1-29 In this e x ample , the fr action pr ec ision is s et to 6. Complex numbers Complex results The HP 39gs can return a complex number as a result for some math functions. A comp lex number appears a s an ordered pair ( x, y ), where x is the real part and y is the imaginary part. For example, entering returns (0,1). To enter comp ...

  • HP 39gs - page 40

    1-30 Getting started Catalogs and editors The HP 39gs has several catalogs and editors. You use them to create and manipulate objects. They access features and stored values (numbe rs or text or other items) that are independent of aplets. • A catalog lists items, w hich y ou can delete or tr ansmit , for e xampl e an aplet . • An edito r lets ...

  • HP 39gs - page 41

    Aplets and their views 2-1 2 Aplets and t heir v ie w s Aplet views This section examines the options an d functionality of the three main views for the Function, Polar, Parametric, and Sequence aplets: Symbolic, Plot, and Numeric views. About the Symbolic view The Symbolic view is the defining view for the Functi on, Parametric, Polar, and Seque n ...

  • HP 39gs - page 42

    2-2 Aplets and their views – For a F unc tion definiti on , e nt er an e xpr es sio n to def ine F(X) . The only independent variab le in th e ex pre ss i on i s X. – Fo r a P arametric definiti on , e nt er a pair of e xpr essi ons to def ine X(T) and Y(T) . The o nly independent v ari able in the e xpr es sions is T . – Fo r a P o l ar defi ...

  • HP 39gs - page 43

    Aplets and their views 2-3 Evaluating expressions In aplets In the Symbolic view, a variable is a symbol only, and does not represent one specif ic value. To evaluate a function in Symbolic view, press . If a function calls another function, then reso lves all references to other functions in terms of their independent variable. 1. Choo se the F un ...

  • HP 39gs - page 44

    2-4 Aplets and their views In HOME You can also evaluate any expression in HOME by entering it into the edit line and pressing . For example, define F4 as below. In HOME, type F4(9) and press . This evaluates the expression, substituting 9 in place of X into F4 . SYMB view keys The following table details the menu keys that you use to work with the ...

  • HP 39gs - page 45

    Aplets and their views 2-5 About the Plot view After entering and selecting (check marking) the expression in the Symbolic view, press . To adjust the appearance of the graph or the interval that is displayed, you can change the Plot view settings. You can plot up to ten expressions at the same time. Select the expressions you want to be plotted to ...

  • HP 39gs - page 46

    2-6 Aplets and their views Plot view settings The plot view settings are: Those items with space for a checkmark are settings you can turn on or off. Press to display the second page. F ield Meaning XRNG, YRNG Specifies the minimum and maximum horizontal ( X ) and vertical ( Y ) values for the plotting window. RES For function plots: Resolution; ? ...

  • HP 39gs - page 47

    Aplets and their views 2-7 Reset plot settings To reset the default values for all plot settings, press CLEAR in the Plot Setup view. To reset the default value for a field, highlight the field, and pres s . Exploring the graph Pl o t v i ew g iv e s y ou a se l ec t io n of k ey s a n d m e nu k ey s to explore a graph further. The options vary fr ...

  • HP 39gs - page 48

    2-8 Aplets and their views Trace a graph You can trace along a function using the or key which moves the cur sor along the graph. The display also shows the current coordinate position ( x, y ) of the cursor. Trace mode and the coordinate di splay are automatically set when a plot is drawn. Note: Tracing might not appe ar to exactly follow your plo ...

  • HP 39gs - page 49

    Aplets and their views 2-9 To jump directly to a value To jump straight to a value rather than using the Trace function, use the menu key. Press , then enter a value. Press to jump to the value. To turn trace on/off If the menu labels are no t displayed, press first. • T urn o ff tr ace mode by pr essing . • T urn on tr ac e mode by pre ssing . ...

  • HP 39gs - page 50

    2-10 Aplets and their views Y-Zoom In Divides vertical scale only, using Y-factor. Y-Zoom Out Multipli es vertical scale only, using Y-factor. Square Changes the vertical scale to match the horizontal scale. (Use this after doing a Box Zoo m, X-Zoom, or Y-Zoom.) Set Factors... Sets the X-Zoom and Y-Zoom factors for zooming in or zooming out. Includ ...

  • HP 39gs - page 51

    Aplets and their views 2-11 ZOOM examples The following screens show the effects of zooming options on a plot of . Plot of Zoom In : In Un-zoom : Un-zoom Note: Press to move to the bottom of the Zoom list. Zoom Out : Out Now un -zoom . X-Zoom In : X-Zoom In Now un -zoom . X-Zoom Out : X-Zoom Out Now un -zoom . Un-zoom Returns the display to the pre ...

  • HP 39gs - page 52

    2-12 Aplets and their views Y-Zoom In: Y-Zoom In Now un-zoom. Y-Zoom Out: Y-Zoom Out Zoom Square: Square To box zoom The Box Zoom option lets you dr aw a box aroun d the area you want to zoom in on by selecting the endpoints of one diagonal of the zoom rectangle. 1. If necessary , pr ess to turn o n the menu -k e y labels . 2. P r e s s a n d s e l ...

  • HP 39gs - page 53

    Aplets and their views 2-13 To set zoom factors 1. In the P lot v ie w , pr ess . 2. P r e s s . 3. S e l e c t Set Factors... and pr es s . 4. Enter the z oom fac tors . Ther e is one z oom fac tor f or the hor i z ontal sc ale ( XZOOM ) and one f or the vertical sca le ( YZOOM ). Z ooming out multipli es the s cale by the fac tor , so that a gr e ...

  • HP 39gs - page 54

    2-14 Aplets and their views Split the screen The Plot-Detail view can give you two simultaneous views of the plot. 1. Pr ess . Se lect Plot-Detai l and pr ess . The gr aph i s plotted twi ce. Y ou can no w z oom in on the r ight si de. 2. P r e s s , selec t the z oom method and pres s or . This z ooms the r ight si de. Her e is an e x ample of s p ...

  • HP 39gs - page 55

    Aplets and their views 2-15 – mo ves the leftmost c ursor to the scr een’s left edge an d mo ves the ri ghtmost c ursor to the s cr een ’s ri ght edge . – T he menu k e y copies the r ight plot t o the left plot . 3 . T o un -split the sc reen , pre ss . The left si de tak es o ver the wh ole scr e en . The Plot-Table view gives you two sim ...

  • HP 39gs - page 56

    2-16 Aplets and their views About the numeric view After entering and selecting (check marking) the expression or expressions that you want to explore in the Symbolic view, press to view a table of data values for the independent variable ( X , T, θ , or N ) and dependent variables. Setting up the table (Numeric view setup) Press NUM to define any ...

  • HP 39gs - page 57

    Aplets and their views 2-17 Numeric view settings The following table details the fields on the Numeric Setup input form. Reset numeric settings To reset the default values for all table settings, press CLEAR . Exploring the table of numbers NUM view menu keys The following table details the menu keys that you use to work with the table of numbers. ...

  • HP 39gs - page 58

    2-18 Aplets and their views ZOOM options The following table lists the zoom options: The display on the right is a Zoom In of the display on the left. The ZOOM factor is 4. HINT To jump to an independent va riable value in the table, use the arrow keys to place the cursor in the independent variable column, then enter the value to jump to. Automati ...

  • HP 39gs - page 59

    Aplets and their views 2-19 Building your own table of numbers The default NUMTYPE is “Automatic”, which fills the table with data for regular intervals of the independent ( X , T , θ , or N ) variable. With the NUMTYPE option set to “Build Your Own”, you fill the table yourself by typing in the independent-variable values yo u want. The d ...

  • HP 39gs - page 60

    2-20 Aplets and their views “Build Your Own” menu keys Example: plotting a circle Plot the circle, x 2 + y 2 = 9 . Fi rst rearrange it to read . To plot both the positive and negative y values, you need to define two equations as follows: and K e y Meaning Puts the highlighted independent value ( X , T , θ , or N ) into the edit line. Pressing ...

  • HP 39gs - page 61

    Aplets and their views 2-21 1. In the F unction aplet , spec ify the functi ons . Select Function 9 9 2 . Rese t the gr aph se tup to the de fa ult setting s. SETUP - PLOT CLEAR 3 . P lot the two func tions and hide the men u so that y ou can see all the ci rc l e. 4. R eset the n umer ic s etup to the def ault se ttings. SETUP - NUM CLEAR 5 . Disp ...

  • HP 39gs - page 62

    HP 39gs English. book Page 22 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 63

    Function aplet 3-1 3 F unc tion aplet About the Function aplet The Function aplet enables you to explore up to 10 real-valued, rectangu lar functions y in terms of x . For example . Once you have defined a function you can: • cr eate gr aphs to fi nd r oots, int er cepts, slope , signed ar ea, and e x tr ema • cr eate tables to evaluate f uncti ...

  • HP 39gs - page 64

    3-2 Function aplet Define the expressions 2 . T her e are 10 f uncti on def inition f ields on the F uncti on aplet’s S y mbolic v ie w sc r een . Th ey ar e labeled F1(X) to F0(X). Highligh t the func tion de f inition f ield y ou w ant to use , and en ter a n e xpr es si on . (Y o u can pr ess to delete an e xis ting line , or CLEAR to clear al ...

  • HP 39gs - page 65

    Function aplet 3-3 Change the scale 6 . Y ou can chan ge the scale to see mo r e or le ss of your gr aphs . In this e xam ple , ch oose Auto Scale . (See “VIEW S menu options ” on page 2 -13 f or a de scr ip t ion of Aut o Sc al e) . Select Auto Scale Trace a graph 7 . T race the linear f uncti on . 6 times Note: B y default , the tr acer is ac ...

  • HP 39gs - page 66

    3-4 Function aplet Analyse graph with FCN functions 9. Display the Plot view menu. From the Plot view menu, you can use the functions on the FCN menu to find roots, intersections, slopes, and areas for a function defined in the Function aplet (and any Function-based ap lets). The FCN fun ctions act on the currently selecte d graph. See “FCN func ...

  • HP 39gs - page 67

    Function aplet 3-5 12 . Cho ose the linear f unction w hose int ers ecti on w ith the quadr atic functi on you w ish to f ind. T he coor dinates o f the inters ecti on poin t ar e display ed at the bottom of the scr een. Note: If ther e is more than one inter secti on (as in our e xam ple) , the coor dinates of the inter sec tion po int c lose st t ...

  • HP 39gs - page 68

    3-6 Function aplet 15 . Mo v e the c urso r to x = –2 by pr essing the or key . 16 . Pr es s to acce pt using F2(x) = (x + 3) 2 – 2 as the other boundar y for the integr al. 17 . Choo se the end v alue for x . 1 Th e cu rs or ju mps t o x = – 1 on the linear func tion . 18. Displa y the numerical value of the integral. Note: See “Shading ar ...

  • HP 39gs - page 69

    Function aplet 3-7 HINT The Root and Extremum functions return one value only even if the function has more than one r oot or extremum. The function finds the value closest to the position of the cursor. You need to re- locate the cursor to find oth er roots or extrema that may exist. Display the numeric view 20. Display the numer ic v ie w . Set u ...

  • HP 39gs - page 70

    3-8 Function aplet To navigate around a table 2 4. Mo v e to X = –5 .9 . 6 times To go directly to a value 2 5. Mov e direc tly to X = 10. 1 0 To access the zoom options 2 6 . Z oom in on X = 10 by a fact or of 4. Note: NUMZOOM has a setting of 4 . In To change font size 2 7 . Displa y table numbe rs in lar ge f ont . To display the symbolic defi ...

  • HP 39gs - page 71

    Function aplet 3-9 Function aplet interactive analysis From the Plot view ( ), you can use the functions on the FCN menu to find r oots, intersections, slopes, and areas for a function defined in the Function aplet (and any Function-based aplets). See “FCN functions” on page 3- 10. The FCN operations act on the currently sele cted graph. The re ...

  • HP 39gs - page 72

    3-10 Function aplet FCN functions The FCN functions are: Function Description Root Select Root to find the root of the current function nearest the cursor. If no root is found, but only an extremum, then the result is labeled EXTR: instead of ROOT: . (The root-finder is also used in the Solve aplet. See also “Interpreting results” on page 7-6.) ...

  • HP 39gs - page 73

    Function aplet 3-11 Shading area You can shade a selected area between functio ns. This process also gi ves you an appro ximate measurement of the area shaded. 1. Open the F unction aplet. T he Func tion aplet opens in the S ymbolic v ie w . 2 . Select the e xpr essi ons wh ose c ur v es y ou w ant to stu dy . 3 . Pres s to plot the functi ons . 4. ...

  • HP 39gs - page 74

    3-12 Function aplet Plotting a piecewise-defined function Suppose you wanted to plot the following piecewise- defined function. 1. Open the F unction apl et . Sele ct Function 2 . Highlight the line you wan t to us e , and ente r the e xpre ssion . (Y ou can pre ss to delete an e xisting line , or CLEAR to c lear all lines .) 2 CHARS ≤ 1 CHARS &g ...

  • HP 39gs - page 75

    Parametric aplet 4-1 4 Pa r a m e t r i c a p l e t About the Parametric aplet The Parametric aplet allows you to explore parametric equations. These are equ ations in which both x and y are defined as functions of t . They take the forms and . Getting started with the Parametric aplet The following example uses the parametric equations Note: This ...

  • HP 39gs - page 76

    4-2 Parametric aplet Set angle measure 3 . Set the angle measu r e to degrees. MODES Select Degrees Set up the plot 4. Display the graphing options. PLOT T he P lot Setu p inpu t for m has t w o f ields n ot inc luded in the Func tion aplet , TRNG and TSTEP . TRNG spec if ies the r ange of t val ue s. TSTEP spec if ies the step value between t valu ...

  • HP 39gs - page 77

    Parametric aplet 4-3 Overlay plot 8. Plot a triangle graph over the existing ci rcle graph. PLOT 120 Sele ct Overlay Plot A tri angle is displa yed r ather than a c irc le ( with out c hanging the equati on) becaus e the c hanged value o f TSTEP ensur es that points be ing plot ted ar e 120 ° apart instea d of near l y continuou s. Y ou ar e able ...

  • HP 39gs - page 78

    HP 39gs English. book Page 4 Wed nesday, December 7, 2 005 11:24 PM ...

  • HP 39gs - page 79

    Polar aplet 5-1 5 Po l a r a p l e t Getting started with the Polar aplet Open the Polar aplet 1. Open the P olar aplet . Sele ct Polar L ik e the F unction aple t , the P o lar aplet opens in the S ymboli c v ie w . Define the expression 2 . Define the po lar equati on . 2 π 2 Specify plot settings 3 . S pec ify the plot settings . In this ex amp ...

  • HP 39gs - page 80

    5-2 Polar aplet Explore the graph 5 . Displa y the Plot v ie w menu k ey labels . Th e Pl ot vi ew op t i on s av ailable ar e the same as those f ound in the F u ncti on aplet . See “Explor ing the gra ph ” on page 2 - 7 fo r further informati on . Display the numbers 6 . Displa y the table of v alue s for θ and R1. Th e N u m eric view optio ...

  • HP 39gs - page 81

    Sequence aplet 6-1 6 Sequence aplet About the Sequence aplet The Sequence aplet allows you to explore sequences. You can define a sequence named, for example, U1: • in terms of n • in terms of U1 ( n –1) •i n ter ms of U1 ( n –2) • in ter ms of another sequence , for e xample , U2 ( n ) • in an y combination of the a bov e. The Sequen ...

  • HP 39gs - page 82

    6-2 Sequence aplet Open the Sequence ap let 1. Open the Sequ ence aplet . Sele ct Sequence The Sequence ap let starts in the S ymboli c view . Define the expression 2 . Def ine the F ibonacc i sequence, in w hich eac h term (after the f irst tw o) is the sum of the pr eceding tw o terms: , , for . In the S ymboli c v ie w of the Seq uence aplet , h ...

  • HP 39gs - page 83

    Sequence aplet 6-3 Plot the sequence 4. P lot the Fibonacc i sequ ence. 5. In Plot Setup, set the SEQPLOT option to Co bweb . SETUP - PLOT Select Cobweb Display the table 6 . Displa y the table of values for this e xample . HP 39gs English. book Page 3 Wed nesday, December 7, 2 005 11:24 PM ...

  • HP 39gs - page 84

    HP 39gs English. book Page 4 Wed nesday, December 7, 2 005 11:24 PM ...

  • HP 39gs - page 85

    Solve aple t 7-1 7 Solve aplet About the Solve aplet The Solve aplet solves an equation or an expression for its unknown variable . You define an equation or expression in the symbolic view, then supply values for all the variables exce pt one in the numeric view. Solve works only with real numbers. Note the differences between an equation and an e ...

  • HP 39gs - page 86

    7-2 Solve a plet Getting started with the Solve aplet Suppose you want to find th e acceleration needed to increase the speed of a car from 16.67 m/sec (60 kph) to 27.78 m/sec (100 kph) in a distance of 1 00 m. The equation to solve is: Open the Solve aplet 1. Open the Solv e aplet. Sele ct Solve T he Sol v e aplet st arts in the s y mbolic v iew . ...

  • HP 39gs - page 87

    Solve aple t 7-3 4. Enter the values f or the kno wn va ri ables . 2 7 7 8 1 6 6 7 1 0 0 HINT If the Decimal Mark setting in the Modes input form ( MODES ) is set to Comma, use instead of . Solve the unknown variable 5. Sol v e f or the unkno wn var iable ( A ). T her ef or e , the accelerati on needed to inc r ease the speed of a car fr om 16.6 7 ...

  • HP 39gs - page 88

    7-4 Solve a plet 6. P lot the equati on f or v ari able A . Sele ct Auto Scale 7 . T race along the gr aph r epr esen ting the left side of the equati on until the c ursor nears the inter sec tion . 20 times Note the v alue o f A display ed near the bottom left corner of the scr een. T he Plo t vi e w pr o v ides a con v enien t wa y to f ind an ap ...

  • HP 39gs - page 89

    Solve aple t 7-5 Use an initial guess You can usually obtain a fa ster and more accurate solution if you supply an estimated valu e for the unknown variable before pressing . Solve starts looking for a solution at the initial guess. Bef or e plottin g , make sur e the unkno wn v ariable is highli ghted in the nume ri c v ie w . P lot the equati on ...

  • HP 39gs - page 90

    7-6 Solve a plet Interpreting results After Solve has returned a solution, press in the Numeric view for more information. You will see one of the following three messages. Press to clear the message. Messa ge Condi tion Zero The Solve aplet found a point where both sides of the equation were equal , or wher e the expression was zero (a root), with ...

  • HP 39gs - page 91

    Solve aple t 7-7 If Solve could not find a solution, you will see one of the following two messages. HINT It is important to check the information relating to the solve process. For example, the solution that the Solve aplet finds is not a solution, but the closest that the function gets to zero. Only by checking the information will you know that ...

  • HP 39gs - page 92

    7-8 Solve a plet where X is distance, V 0 is initial velocity, T is time, and A is acceleration. This is actually two equations, Y = X and Y = V 0 T + (AT 2 ) / 2 . Since this equation is quadratic for T , there can be both a positive and a negative solution. However, we are concerned only with posi tive so lutions, since only positive distance mak ...

  • HP 39gs - page 93

    Solve aple t 7-9 5. Move the cursor near the positive (right-side) intersection. This cursor value will be an initial guess for T . Pr ess until the c urs or is at the inters ecti on. Th e t wo p oi nt s of inter sec tion sho w that ther e ar e tw o soluti ons f or this equati on . Ho w e ve r , on ly po si t ive va l ue s fo r X mak e sense , so w ...

  • HP 39gs - page 94

    7-10 Solve a plet Using variables in equations You can use any of the real variable names, A to Z and θ . Do not use variable nam es defined for other type s, such as M 1 (a matrix variable). Home variables All home variables (other than t hose for aplet settings, like Xmin and Ytick ) are globa l , which means they are shared throughout the diffe ...

  • HP 39gs - page 95

    Linear Solve r aplet 8-1 8 Li n e a r S o lve r a p l e t About the Linear Solver aplet The Linear Solver aplet allows you to solve a set of Linear Equations. The set can contain two or three linear equations. In a two-equation set, each equation must be in the form . In a three-equation set, e ach equation must be in the form . You provide values ...

  • HP 39gs - page 96

    8-2 Linear Solver aplet Choose the equation set 2 . If the last time y ou us ed the L inear Sol v er aplet yo u so l ve d fo r t wo equati ons, the tw o - equati on input f orm is display ed (as in the e x ample in the pr ev ious step) . T o solv e a th r e e -equation set , pre ss . No w the input f or m displa y s thr ee equati ons . If the three ...

  • HP 39gs - page 97

    Linear Solve r aplet 8-3 soon as the f irst co -eff ic ient o f the last eq uation was enter ed. As you enter each of the r emaining kno wn v alues , the soluti on c hanges . T he ex ample at the ri ght sho ws the fi nal soluti on once all th e c o - efficient s a nd constants are e nter ed for the set o f equati ons w e set out to solve . HP 39gs ...

  • HP 39gs - page 98

    HP 39gs English. book Page 4 Wed nesday, December 7, 2 005 11:24 PM ...

  • HP 39gs - page 99

    Triangle Solve apl et 9-1 9 T riangle Solv e aplet About the Triangle Solver aplet The Triangle Solver aplet a llows you to determine the length of a side of a triangle, or the ang le at the vertex of a triangle, from information you supply about the other lengths and/or other angles. You need to specify at leas t three of the six possible values? ...

  • HP 39gs - page 100

    9-2 Triangle Solv e aplet Open the Triangle Solver aplet 1. Open the T riangle S olv er aplet . Sele ct Triangle Solver The T r iangle Solv er aplet open s . Note : if y ou h a v e alr eady u sed the T ri angle Sol v er , the entries and re sul ts fr om the pre v ious use w i ll still be display ed. T o start the T r iangle Solv er a fr esh, c lear ...

  • HP 39gs - page 101

    Triangle Solve apl et 9-3 lengths as B and C, w e would ne ed to spec if y the angle as α . T he illustr a ti on on the displa y w ill help y ou determine wher e to enter t he know n values. Note: if y ou need to change the angle measur e mode , pres s MO DES , change the mode , and then pr ess to r eturn to the aplet . 4. Pr ess . T he solv er ca ...

  • HP 39gs - page 102

    9-4 Triangle Solv e aplet Not enough data If you are using the general input form, you need to specify at least three values for the Triangle Solver to be able to calculate the remaining attributes of the triangle. If you specify less than three , Not enough data appears on the screen. If you are using the simplified input form (for a right- angled ...

  • HP 39gs - page 103

    Statistics aplet 10-1 10 Statis tic s a ple t About the Statistics aplet The Statistics aplet can store up to ten data sets at one time. It can perform one- variab le or two-variable statistical analysis of one or more sets of data. The Statistics aplet starts with the Numeric view which is used to enter data. The Symbol ic view is used to specify ...

  • HP 39gs - page 104

    10-2 Statistics aplet Open the Statistics aplet 1. Open the Statis tics a plet and c lear e x isting data b y pr essing . Select Statistics Th e S ta t is ti cs ap l et starts in the Numer ical view . At an y time the Statisti cs aplet is conf igur ed for o nly one of t wo types of sta tistical explorations: one - var iable ( ) or tw o-v ariable ( ...

  • HP 39gs - page 105

    Statistics aplet 10-3 Choose fit and data columns 4. Select a fi t in the S y mbolic setu p vi e w . SETUP - SYMB Sele ct Linear Y ou c a n cre at e u p t o five ex p lo ra t io n s of t wo - va ri ab l e data , named S1 to S5 . I n t hi s exa m pl e, we wil l cre a te jus t o n e: S1 . 5 . Spec ify the columns that hold the data yo u w ant to anal ...

  • HP 39gs - page 106

    10-4 Statistics aplet Setup plot 8. Change the plotting range t o ensur e all the data points ar e plot ted (and select a diff er ent point mar k, if yo u wi s h ) . SETUP - PLOT 7 100 400 0 Plot the graph 9 . Plo t the gr aph . Draw the regression curve 10. Dra w the reg r essi on c urve (a c ur ve to fi t the data points). T his dra w s the r egr ...

  • HP 39gs - page 107

    Statistics aplet 10-5 Predict values 13 . T o find the pr edic ted sale s f igur e if adv er tising w er e to go up to 6 minute s: S ( to highlight Stat-Two ) (to highligh t PREDY ) 6 14. Retu rn to the P lot vi e w . 15 . Jum p to the indicat ed point on the r egr essi on line . 6 Observ e the pr edict ed y -v alue in the left bottom corner of the ...

  • HP 39gs - page 108

    10-6 Statistics aplet Entering and editing statistical data The Numeric view ( ) is used to enter data into the Statistics aplet. Each column represents a variable named C0 to C9 . After entering the data, you must define the data set in the Symbolic view ( ). HINT A data column must have at least four data points to provide vali d two-variable sta ...

  • HP 39gs - page 109

    Statistics aplet 10-7 Example You are measurin g the height of students in a classroom to find the mean height. The first five students have the following measurements 160cm, 165cm, 1 70cm, 175cm, 180cm. 1. Open the Stati stics aplet . Sele ct Statistics 2 . Enter the measurement data. 160 16 5 17 0 17 5 180 3 . F ind the mean of the sampl e. Ensur ...

  • HP 39gs - page 110

    10-8 Statistics aplet Note that the title o f the colu mn o f st atis ti cs i s H1 . Ther e a r e 5 data set de f initions a vailable for one -v ari able sta tis tics : H1–H5 . If data is entered in C1 , H1 is automatically set to use C1 fo r data , and the fr equency of eac h data point is set to 1. Y ou can select other columns o f data fr om t ...

  • HP 39gs - page 111

    Statistics aplet 10-9 To continue our example, supp ose that the heights of the rest of the students in the class are measured, but each one is rounded to the nearest of the five values first recorded. Instead of entering all the new data in C1 , we shall simply add another column, C2 , that holds the frequencies of our five data points in C1 . 5 . ...

  • HP 39gs - page 112

    10-10 Statistics aplet 6 . R eturn t o the numer ic vi ew . 7 . Ente r the fr equency data sho wn in the a bo ve t able . 5 3 8 2 1 8. Display the comp uted sta tis tics. The mean height is approxim ately 167.63cm. 9 . Setu p a histogr am plot for the data . SETUP - PLOT Enter s et up inf or matio n appropriate to your data. 10. P lot a histogr am ...

  • HP 39gs - page 113

    Statistics aplet 10-11 Delete data • T o delete a single data item, highli ght it and pr ess . T he value s belo w the delet ed cell w ill scr oll up one ro w . • T o delete a column of data , highli ght an entry in that column and press CLEAR . Select the co lumn name . • T o delete all columns of data , pres s CLEAR . Sele ct All columns . ...

  • HP 39gs - page 114

    10-12 Statistics aplet Defining a regression model The Symbolic view includes an expression (Fit1 through Fit5) that defines the regression model, or “fit”, to use for the regression analysis of each two-variable data set. There are three ways to select a regression model: • Accept the d efa ult opt ion to f it th e data to a straight line . ...

  • HP 39gs - page 115

    Statistics aplet 10-13 To define your own fit 1. In Numeric v iew , make sur e is set. 2 . Display the S y mbolic v iew . 3 . Highligh t the F it expr es sion ( Fit1 , et c.) f or the desir ed data set. 4. T y pe in an e xpr essi on and pr ess . The independent variable must be X , and the e xpr essi on mu st not cont ain any unkn o wn v aria bles. ...

  • HP 39gs - page 116

    10-14 Statistics aplet Computed statistics One-variable When the data set contains an odd number of values, the data set’s median value is no t us ed when calculating Q1 and Q3 in the table above. For example, for the following data set: { 3,5,7,8,15,16,17 } only the first three items, 3, 5, and 7 are used to calculate Q1, and only the last three ...

  • HP 39gs - page 117

    Statistics aplet 10-15 Two-variable Plotting You can p lot: • histogr ams ( ) • bo x -and-whisk er plots ( ) • scat ter plots ( ) . Once you have ente red your data ( ), defined your data set ( ), and defined your Fit model for two- variable statistics ( SETUP - SYMB ), you can plot your data. You can plot up to five scatter or box-an d-whisk ...

  • HP 39gs - page 118

    10-16 Statistics aplet To plot statistical data 1. In Sy mbolic v i ew ( ) , se lect ( ) the data sets y ou w ant to plot . 2 . Fo r one -var iable dat a ( ) , selec t the plot type in P lot Setup ( SETUP - PLOT ) . Highli ght ST A TPLOT , pr ess , select e ither Histogram or BoxWhisker , and pr es s . 3 . F or any plot , but espec iall y fo r a hi ...

  • HP 39gs - page 119

    Statistics aplet 10-17 Scatter Plot Tw o-variable statistics . The numbers below the plot indicate that the cursor is at the first data point for S2, at (1, 6). Press to move to the next data point and display information about it. To connect the data points as they are plotted, checkmark CONNECT in the second page of the Plot Setup. This is not a ...

  • HP 39gs - page 120

    10-18 Statistics aplet Relati ve Error The relative error is a measure of the error between predicted values and actual va lues based on the specified Fit. A smaller number means a better fit. The relative error is stored in a variable named RELERR . The relative error provides a measur e of fit accuracy for all fits, and it does depend on the Fit ...

  • HP 39gs - page 121

    Statistics aplet 10-19 For instance, the data set (1,1 ), (3,9), (4,16), (2,4) would be plotted and traced in the order (1,1), (2,4), (3,9), (4,16). Trouble-shooting a plot If you have problems plotting, check that you have the following: • T he cor r ect or menu label o n (Numer ic vi ew ) . • T he corr ect fit (r egres sion model), if the dat ...

  • HP 39gs - page 122

    10-20 Statistics aplet Calculating predicted values The functions PREDX and PREDY estimate (predict) values for X or Y given a hypothetical value for the other. The estimation is made based on the curve that has been calculated to fit the data a ccording to the specified fit. Find predicted values 1. In Plot v ie w , dra w the r egr ess ion c ur ve ...

  • HP 39gs - page 123

    Statistics aplet 10-21 • Enter P RED Y( x-value ) to f ind the pr edicted v alue of the dependent var iable gi ven a h ypothetical independent va riab l e. You can type PREDX and PREDY into the edit line, or you can copy these function names from the MATH menu under the Stat-Two category. HINT In cases where more than one fit curve is displayed, ...

  • HP 39gs - page 124

    HP 39gs English. book Page 22 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 125

    Inference aplet 11-1 11 Inference aplet About the Inference aplet The Inference capabilities include calculation of confidence intervals and hy pothesis tests based on the Normal Z-distribution or Student’s t-distribution. Based on the statistics from one or two samples, you can test hypotheses and find confidence intervals for the following quan ...

  • HP 39gs - page 126

    11-2 Inferenc e aplet Inference aplet’s SYMB view keys The table below summarizes the options available in Symbolic view. If you choose one of the hypoth esis tes ts, you can choose the alternative hypothesis to test against the null hypothesis. For each test, th ere are three possible choices for an alternative hypothesis based on a quantitative ...

  • HP 39gs - page 127

    Inference aplet 11-3 Select the inferential method 2. Select the Hypothesis Test infer ential method. Select HYPOTH TEST 3. Define the type of test. Z–Test: 1 μ 4. Select an alternative hypothesis. μ< μ0 Enter data 5. Enter the sample statistics and population parameters. setup-NUM The table below lists the fields in this view for our curre ...

  • HP 39gs - page 128

    11-4 Inferenc e aplet By default, each field already contains a value. These values constitu te the example database and are expla ined in the feature of this aplet. Display on-line help 6. To display the on-line help, press 7. To close the on-line help, press . Display test results in numeric format 8. Display the test results in numeric format. T ...

  • HP 39gs - page 129

    Inference aplet 11-5 A calculator produces the following 6 random number s: 0.529, 0.295, 0.95 2, 0.259, 0.925, and 0. 592 Open the Statistics aplet 1. Open the Statistics aplet and reset the current settings. Select Statistics The Statistics aplet opens in the Numeric view. Enter data 2. In the C1 column, enter the random numbers produced by the c ...

  • HP 39gs - page 130

    11-6 Inferenc e aplet Open Inference aplet 6. Open the Inference aplet and clear current s ettings. Select Inference Select inference method and type 7. Select an inference method. Select CONF INTERVAL 8. Select a distribution statistic type. Select T-Int: 1 μ Set up the interval calculation 9. Set up the interval calculation. Note: The default va ...

  • HP 39gs - page 131

    Inference aplet 11-7 Import the data 10. Import the data from the Statistics aple t. Note: The data from C1 is disp layed by default. Note: Press to see the statistics before importing them into the Numeric Setup view. Also, if there is more than one ap let based on the Statistics aplet, you are prompted to choose one. 11. Specify a 90% confidence ...

  • HP 39gs - page 132

    11-8 Inferenc e aplet Hypothesis tests You use hypothesis tests to test the validity of hypotheses that relate to the statistical parameters of one or two populations. The tests are base d on statistics of samples of the populations. The HP 39gs hypothesis tests use the Normal Z-distribution or Student’ s t-distribution to calcula te probabilitie ...

  • HP 39gs - page 133

    Inference aplet 11-9 Results The results are: Two-Sample Z-Test Menu name Z-Test: μ 1– μ 2 On the basis of two samples, each from a separate population, this test measu res the strength of the evidence for a selected hypothesis against the null hypothesis. The null hypothesis is that the mean of the two populations are equal (H 0 : μ 1= μ 2). ...

  • HP 39gs - page 134

    11-10 Inferenc e aplet Results The results are: One-Proportion Z-Test Menu name Z-Test: 1π On the basis of statistics from a single sample, this test measures the strength of the evidence for a selected hypothesis against the null hypothesis. The null hypothesis is that the proportion of su ccesses in the two populations is equal: H 0 : π = π 0 ...

  • HP 39gs - page 135

    Inference aplet 11-11 Inputs The inputs are: Results The results are: Two-Proportion Z-Test Menu name Z-Test: π 1 – π 2 On the basis of statistics fr om two samples, each from a different population, the Two-Proportion Z-Test measures the stre ngth of the evidence for a selected hypo thesis against the null hypothesis. The null hypothesis is th ...

  • HP 39gs - page 136

    11-12 Inferenc e aplet Inputs The inputs are: Results The results are: One-Sample T-Test Menu name T-Test: 1 μ The One-sample T-Test is used when the population standard deviation i s not know n. On the basis of statistics from a single sample, this tes t measures the strength of the evidence for a selected hypothesis against the nu ll hypothesis. ...

  • HP 39gs - page 137

    Inference aplet 11-13 Inputs The inputs are: Results The results are: Field name Definiti on Sample mean. Sx Sample standard de viation. n Sample size. μ0 Hypothetical population mean. α Significance level. x Result Description Test T T-Test statistic. Prob Probability associated with the T-Test statistic. Critical T Boundary value of T assoc iat ...

  • HP 39gs - page 138

    11-14 Inferenc e aplet Two-Sample T-Test Menu name T-Test: μ 1 – μ 2 The Two-sample T-Test is used when the population standard deviation i s not know n. On the basis of statistics from two samples, each sample from a different population, this test measures the strength of the evidence for a selected hypothesis against the null hypothesis. The ...

  • HP 39gs - page 139

    Inference aplet 11-15 Results The results are: Confidence intervals The confidence interval calculations that the HP 39gs can perform are based on the Normal Z-distribution or Student’s t-distribution. One-Sample Z-Interval Menu name Z-INT: μ 1 This option uses the Normal Z-distributio n to calculate a confidence interval for m, the true mean of ...

  • HP 39gs - page 140

    11-16 Inferenc e aplet Results The results are: Two-Sample Z-Interval Menu name Z-IN T: μ1 – μ2 This option uses the Normal Z- distribution to calculate a confidence interval for the difference between the means of two populations, μ 1 – μ 2 , when the population standard deviations, σ 1 and σ 2 , are known. Inputs The inputs are: Results ...

  • HP 39gs - page 141

    Inference aplet 11-17 One-Proportion Z-Interval Menu name Z-INT: 1 π This option uses the Normal Z-distributio n to calculate a confidence interval for the proportion of successes in a population for the case in wh ich a sample of size, n , has a number of successes, x . Inputs The inputs are: Results The results are: Two-Proportion Z-Interval Men ...

  • HP 39gs - page 142

    11-18 Inferenc e aplet Results The results are: One-Sample T-Interval Menu name T-INT: 1 μ This option uses the Student’s t-distribution to ca lculate a confidence interval for m, the true mean of a population, for the case in which the true population standard deviation, s, is unknown. Inputs The inputs are: n1 Sample 1 si ze. n2 Sample 2 si ze ...

  • HP 39gs - page 143

    Inference aplet 11-19 Results The results are: Two-Sample T-Interval Menu name T-INT: μ 1 – μ 2 This option uses the Student’s t-distribution to calculate a confidence interval for the difference between the means of two populations, μ 1 – μ 2, when the population standard deviations, s1 and s2, are unknown. Inputs The inputs are: Result ...

  • HP 39gs - page 144

    11-20 Inferenc e aplet Results The results are: Result Description Critical T Critical value for T. μ Min Lower bound for μ 1 – μ 2 . μ Max Upper bound for μ 1 – μ 2 . Δ Δ HP 39gs English. book Page 20 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 145

    Using th e Finance So lver 12-1 12 Using the Finance Solver The Finance Solver, or Fin ance aplet , is available by using the APLET key in your calculator. Use the up and down arrow keys to select the Finance aplet. Your screen should look as follows: Press the key or the soft m enu key to activate the aplet. The result ing screen shows the differe ...

  • HP 39gs - page 146

    12-2 Using t he Finance Sol ver combined amount earns interest at a certain rate. Financial calculations involvin g compound interest include savings accounts, mo rtgages, pension funds, leases, and annuities. Time Value of Money (TVM) calculations, as the name implies, make use of the notion that a dollar today will be worth more than a dollar som ...

  • HP 39gs - page 147

    Using th e Finance So lver 12-3 flow diagram shows lease payments at the beginning of each period. The following cash flow diagram shows deposits into an account at the end of each period. As these cash-flow diagrams imply, there are five TVM variables: PV 1 23 4 5 FV Capital i zed value of lease } PM T PM T PM T PM T PM T PV 1 23 4 5 FV PM T PM T ...

  • HP 39gs - page 148

    12-4 Using t he Finance Sol ver Performing TVM calculations 1. Launch the F inanc ial Sol ver as indi cated at the beginning of this secti on . 2 . Use the arr o w k e ys to hi ghlight the diff ere nt f ields and enter the kno wn var iables in the T VM calc ulations , pr essing the soft -menu k ey after enter ing each kno wn value . Be sure that va ...

  • HP 39gs - page 149

    Using th e Finance So lver 12-5 Example 1 - Loan calculations Suppose you finance the purcha se of a car with a 5-year loan at 5.5% annual intere st, compounded monthly. The purchase price of the car is $19,500, and the down payment is $3,000. What are the r equired monthly payments? What is the largest loan you can afford if your maximum monthly p ...

  • HP 39gs - page 150

    12-6 Using t he Finance Sol ver Example 2 - Mortgage with balloon payment Suppose you have taken out a 30-year, $150,000 house mortgage at 6.5% annual interest. You expect to sell the house in 10 years, repaying the loan in a balloon payment. Find the size of the balloon payment, the value of the mortgage after 10 years of payment. Solution. The fo ...

  • HP 39gs - page 151

    Using th e Finance So lver 12-7 Calculating Amortizations Amortization calculations, which also use the TVM variables, determine the amounts applied towards principal and interest in a payment or series of payments. To calculate amortizations: 1. Start the F inance Sol ver as indicated at the beginning of t hi s se ction. 2 . Se t the follo w ing T ...

  • HP 39gs - page 152

    12-8 Using t he Finance Sol ver 3 . Pr ess the soft menu k ey to amorti z e the new batch o f pay ments . Repeat st eps 1 thr ough 3 as often as needed. Example 4 - Amortization for home mortgage For the results of Example 3, show the amortization of the next 10 years of the mortgage loan. First, press the soft menu key. Then, keeping 120 in the PA ...

  • HP 39gs - page 153

    Using mathemati cal functions 13-1 13 Using math ematical func tions Math functions The HP 39gs contains many math func tions. The functions are grouped in categories. For example, the Matrix category contains functions for manipulating matrices. The Probability category (shown as Prob. on the MATH menu) contains functions for working with probabil ...

  • HP 39gs - page 154

    13-2 Using math ematical functions 2 . The list o f func tions (on the r ight) applie s to the c urr ently hi ghlighted category (on the left) . U se and to sw itch bet w een the categor y list and th e func tion lis t . 3 . Hi ghlight the name of the func tion y ou wan t and pr ess . This copi es the fu nctio n name (and an initial par enthesis, i ...

  • HP 39gs - page 155

    Using mathemati cal functions 13-3 Keyboard functions The most frequently used functions are available directly from the keyboard. Many of the keyboard functions also accept complex numbers as arguments. ,, , Ad d, Subtract, Multiply, Di vide . Also accepts c omplex numbers, lists and matrices. va lu e 1+ va lu e 2 , etc. e x Natural exponential. A ...

  • HP 39gs - page 156

    13-4 Using math ematical functions 10 x Exponential (antilogarithm). Also accepts complex numbers. 10^ val u e Example 10^3 r etur ns 1000 Common logarithm. Also accepts co mplex numbers. LOG ( val u e ) Example LOG(100) r eturns 2 ,, Sine, cosine, tangent. Inputs and outputs depend on the current angle format (Degrees, Radi ans, or Grads). SIN ( v ...

  • HP 39gs - page 157

    Using mathemati cal functions 13-5 ATAN A rc tangent: tan –1 x . Output range is from –90° to 90°, 2 π /2 to π /2, or –100 to 100 grad s. Inputs and outputs depend on the current an gle format. Also accept s complex numbers. ATAN ( valu e ) Example ATAN(1) ret u rn s 45 (Degrees mode). Square. Also accept s complex numbers. va lu e 2 Exam ...

  • HP 39gs - page 158

    13-6 Using math ematical functions Takes the n th root of x . ro ot NTHROOT val ue Example 3 NTHROOT 8 r eturns 2 Calculus functions The symbols for differentiation and integration are available directly form the k eyboard— and S respectively—as well as from the MATH menu. Differentiates expr ession with respect to the vari able of differentiat ...

  • HP 39gs - page 159

    Using mathemati cal functions 13-7 TAYLOR Calculates the n th order Taylor polynomial of expression at the point where the given variab le = 0. TAYLOR ( e xpr ession , var iable , n ) Example TAYLOR(1 + sin(s1) 2 ,s1,5) w ith Radians angle measur e and F rac tion n umber f ormat (s et in MODE S) r etur ns 1+s1^2-1/3*s1^4 . Complex number functions ...

  • HP 39gs - page 160

    13-8 Using math ematical functions Constants The constants available from the MATH FUNCTIONS menu are mathematical constants. These are described in this section. The hp 39gs has two other menus of constants: program constant s and physical constants. These are described in “Program constants and physical constants” on page 13-24. e Natural log ...

  • HP 39gs - page 161

    Using mathemati cal functions 13-9 → IN Convert from centimeters to inches. → L Convert from US gallons to liters. → LGAL Convert from liters to US gallons. → KG Convert from pounds to kilograms. → LBS Convert from kilograms to pounds. → KM Convert from miles to kilometers. → MILE Convert from kilometers to miles. → DEG Convert from ...

  • HP 39gs - page 162

    13-10 Using mathe matical functions EXP Natural exponential. This is more accurate than due to limitations of the power function. EXP ( val u e ) EXPM1 Exponent minus 1 : . This is more accurate than EXP when x is close to zero. EXPM1 ( val ue ) LNP1 Natural log plus 1 : ln( x+1 ). This is more accurate than the natural logarithm function when x is ...

  • HP 39gs - page 163

    Using mathemati cal functions 13-11 Σ Summation. Finds the sum of expression with respect to variable from initialvalue to finalvalue. Σ ( v ar iable = initial v alue , fin a lval u e , e xp r essio n ) Example Σ (C=1,5,C 2 ) r eturns 5 5 . Matrix functions These functions are for matr ix data stored in matrix variables. See “Matrix func tions ...

  • HP 39gs - page 164

    13-12 Using mathe matical functions POLYROOT Polynomial roots. Returns the roots for the n th-order polynomial with the specified n +1 coeffici ents . POLYROOT ([ coe ff ic ien ts ]) Example Fo r x 4 +2x 3 –25x 2 –26x+120 : POLYROOT([1,2,-25,-26,120]) r eturns [2,-3,4,-5] . HINT The results of POLYROOT will often not be easily seen in HOME due ...

  • HP 39gs - page 165

    Using mathemati cal functions 13-13 RANDOM Random number (between zero and 1). Produced by a pseudo-random number sequence. The algorithm used in the RANDOM function uses a seed number to begin its sequence. To ensure that two calculators must produce different results for the RANDOM function, use the RANDSEED function to seed different starting va ...

  • HP 39gs - page 166

    13-14 Using mathe matical functions Examples CEILING(3.2) r eturns 4 CEILING(-3.2) r eturns -3 DEG → RAD Degrees to radians. Converts value from Degrees angle format to Radians angle format. DEG → RAD ( val ue ) Example DEG → RAD( 180 ) r eturns 3.14159265 359 , the va lu e of π . FLOOR Greatest integer less than or equal to value . FLOOR ( ...

  • HP 39gs - page 167

    Using mathemati cal functions 13-15 with a decimal fraction) to H.MMSSs forma t (tim e or angle up to fractions of a second). → HMS ( x.x ) Example → HMS(8.5) r eturns 8.3 INT Integer part. INT ( val ue ) Example INT(23.2) r eturns 23 MANT Mantissa (significant digits) of value . MANT ( valu e ) Example MANT(21.2E34) r eturns 2.12 MAX Maximum. ...

  • HP 39gs - page 168

    13-16 Using mathe matical functions Example % CHANGE(20,50) r eturns 150 %TOTAL Percent total : (100) y/ x . What percentage of x , is y . % TOTAL ( x , y ) Example % TOTAL(20,50) r eturns 250 RAD → DEG Radians to degrees. Converts value from radians to degrees. RAD → DEG ( va lu e ) Example RAD → DEG( π ) r eturns 180 ROUND Rounds value to ...

  • HP 39gs - page 169

    Using mathemati cal functions 13-17 XPON Exponent of value . XPON ( valu e ) Example XPON(123.4) r eturns 2 Two-variable statistics These are functions for use with two-variable statistics. See “Two-variable” on pa ge 10-15. Symbolic functions The symbolic functions are used for symbolic manipulations of expression s. The variables can be forma ...

  • HP 39gs - page 170

    13-18 Using mathe matical functions QUAD Solves quadratic expression= 0 for variab le and returns a new expression, where variable = newexpression. The result is a general solution th at represents both positive and negative solutions by in cluding the formal variable S1 to represent any sign: + or – . QUAD( ex pre ss i on , variab l e ) Example ...

  • HP 39gs - page 171

    Using mathemati cal functions 13-19 = = Equals (logical test). Returns 1 if true, 0 if false. va lu e 1 == va l ue 2 ≠ Not equal to. Returns 1 if true, 0 if false. va lu e 1 ≠ va l ue 2 > Greater than. Returns 1 if true, 0 if false. va lu e 1 > va l ue 2 ≥ Greater than or equal to. Returns 1 if true, 0 if false. va lu e 1 ≥ va l ue 2 ...

  • HP 39gs - page 172

    13-20 Using mathe matical functions ACSC Arc cosecant. ACSC ( val u e ) ASEC Arc secant. ASEC ( val u e ) COT Cotangent: cos x /sin x . COT ( val u e ) CSC Cosecant: 1/sin x CSC ( val u e ) SEC Secant: 1/cos x . SEC ( val u e ) Symbolic calculations The HP 39gs has the ability to perform symbo lic calculations, for example, symbolic integration and ...

  • HP 39gs - page 173

    Using mathemati cal functions 13-21 (The | symbol is in the CHARS menu: press CHARS . The = sign is listed in the MATH menu under Symbolic functions.) Symbolic calculations in the Function aplet You can perform symbolic operations i n the Function aplet’s Symbolic view. For example, to find the derivative of a function in the Function aplet’s S ...

  • HP 39gs - page 174

    13-22 Using mathe matical functions S1 2 . E valuate the f uncti on . 3 . Show the r esult . To find derivatives in the Function aplet’s Symbolic view To find the derivative of the fu nction in the Function aplet’s Symbolic view, you define two functions and define the second function as a derivati ve of the first function. For example, to diff ...

  • HP 39gs - page 175

    Using mathemati cal functions 13-23 4. Pr ess to display the r esult . Note: Us e the arr ow k ey s to v ie w the entir e functi on . | Y ou coul d also j us t def ine . To find the indefinite integral using formal variables F or ex ample, to f ind t he indefinite integral of use: 1. Enter the func tion . 0 S1 3 X 5 X 2 . Show the r esult f orm at ...

  • HP 39gs - page 176

    13-24 Using mathe matical functions This result is de rived from substituting X = S1 and X = 0 into the original expression found in step 1. However, substituting X = 0 will not always evaluate to zero and may result in an unwanted constant. To see this, consider: The ‘extra’ constant of 6.4 results from the substitution of into ( x –2 ) 5 /5 ...

  • HP 39gs - page 177

    Using mathemati cal functions 13-25 To access the menu of program constants: 1. Pr ess . 2. P r e s s . 3 . Use the ar r o w k e y s to na v igate thr ough the options . 4. Clic k and then to di spla y the number assigned to th e option you selected in th e pr ev ious step. The use of program constants i s illustrated in more detail in “Programmi ...

  • HP 39gs - page 178

    13-26 Using mathe matical functions Example Suppose you want to know the potential energy of a mass of 5 units according to the equation . 1. Enter 5 2 . Pr ess and then pr ess . 3 . Select light s... f r om the Phy sic s menu . 4. Pres s . The menu c lose s and the v alue of the selec ted constant is cop ied to the edit line . 5 . Complete the equ ...

  • HP 39gs - page 179

    Variables an d memory manageme nt 14-1 14 V ariables and memory manag ement Introduction The HP 39gs has approximately 200K of user memory. The calculator uses this memory to store variables, perform computations, and store history. A v a r i a b l e i s a n o b j e c t t h a t y o u c r e a t e i n m e m o r y t o h o l d data. The hp 39gs has two ...

  • HP 39gs - page 180

    14-2 Variables and m emory management Storing and recalling variables You can store numbers or expressi ons from a previous input or result into variables. Numeric Precision A number stored in a variable is always stored as a 12- digit mantissa with a 3-digit exponent. Numeric precision in the display, however, de pends on the display mode (Standar ...

  • HP 39gs - page 181

    Variables an d memory manageme nt 14-3 5 . Enter a name for the v ari able . A 6 . Pres s to stor e the re sult . The results of a calculation can also be stored directly to a variable. For example: 2 5 3 B To recall a value To recall a variable’s value, type the name of the variable and press . A To use variables in calculations You can use vari ...

  • HP 39gs - page 182

    14-4 Variables and m emory management The VARS menu You use the VARS menu to access all variables in the calculator. The VARS menu is organi sed by category. For each variable category in the left column, there is a list of variables in the right colu mn. You select a variable category and then select a variable in the category. 1. Open the V ARS m ...

  • HP 39gs - page 183

    Variables an d memory manageme nt 14-5 5 . Ch oose w h ether to place the var ia ble name or the v ari able v alue on the command line . – Pr ess to indicate that y ou want the v ari able ’s contents t o appear on the command line . – Pr ess to indicat e that y ou w ant the v ari able ’s name to a ppear on the command line . 6 . Pr ess to p ...

  • HP 39gs - page 184

    14-6 Variables and m emory management 4. Enter data for L2 . 55 48 86 90 77 5 . Pr ess to ac cess HO ME . 6 . Open the v ar iable men u and selec t L1. 7 . Cop y it to th e command line . Note: Because the option is hi ghlighted , the var iable ’s name , r ather than its contents , is copied to the command line . 8. Insert the + operato r and sel ...

  • HP 39gs - page 185

    Variables an d memory manageme nt 14-7 Home variables It is not possible to store data of one type in a variable of another type. For example, yo u use the Matrix catalog to create matrices. You can crea te up to ten matrices, and you can store these in variables M0 to M9. You cannot store matr ices in variab les other than M0 to M9. Cate- gory A v ...

  • HP 39gs - page 186

    14-8 Variables and m emory management Aplet variables Most aplet variables stor e values t hat are uniqu e to a particular aplet. These includ e symbolic expressions and equations (see below), settings for the Plot and Numeric views, and the results of some calculations such as roots and intersections. See the Reference Information chapter for more ...

  • HP 39gs - page 187

    Variables an d memory manageme nt 14-9 6 . T o cop y the v alue of the v ar iable in to the edit line , pr es s and pr ess . Memory Manager You can use the Memory Manager to determine the amount of available memory on the calculator. You can also use Memory Manager to organize memory. For example, if the available memory is low, you can use the Mem ...

  • HP 39gs - page 188

    HP 39gs English. book Page 10 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 189

    Matrices 15-1 15 M atr ices Introduction You can perform matrix calc ulation s in HOME and in programs. The matrix and each row of a matrix appear in brackets, and the elements and rows are separated by commas. For example, the following matrix: is displayed in the history as: [[1,2,3],[4,5,6]] (If the Decimal Mark mode is set to Comma , then separ ...

  • HP 39gs - page 190

    15-2 Matr ices Creating and storing matrices You can create, edit, delete, send, and receiv e matrices in the Matrix catalog. To open the Matrix catalog, press MATRIX . You can also create and store matrices—named or unnamed—-in HOME. For example, the command: POLYROOT([1,0,–1,0])  M1 stores the root of the c omplex vector of length 3 into ...

  • HP 39gs - page 191

    Matrices 15-3 To create a ma trix in the Matrix Catalog 1. Pr ess MATRIX to open the Matr i x Ca talog . The Matri x catalog lists the 10 av ailable matr ix v ar iable s, M0 to M9 . 2 . Hi ghlight the matr ix v a r iable name you w ant to use and pres s . 3 . Select the type o f matr i x to c r eate. – For a ve c tor (one -dimensio nal array) , s ...

  • HP 39gs - page 192

    15-4 Matr ices A matrix is listed with two dimensions, even if it is 3×1. A vector is listed with the number of elements, such as 3. To transmit a matrix You can send matrices between c alculators just as you can send aplets, programs, lists, and notes. 1. Align the HP 3 9gs calculator s ’ infr ared ports (or connect the calc ulators using an ap ...

  • HP 39gs - page 193

    Matrices 15-5 To display a matrix • In the Matri x catalog ( MATRIX ) , highlight the matri x name and pres s . • In HOME , ente r the name of the matr i x v ari able and pr ess . To display one element In HOME, enter matrixname ( row,column ). For example, if M2 is [[3,4],[5,6]] , then M2(1,2) returns 4 . To create a ma trix in HOME 1. Enter t ...

  • HP 39gs - page 194

    15-6 Matr ices To store one element In HOME, enter, value matrixname ( row, column ). For example, to change the element in the first row and second column of M5 to 728, then display the resulting matrix: 728 M 512 M5 . An attempt to store an element to a row or column beyond the size of the matrix results in an error message. Matrix arithmetic You ...

  • HP 39gs - page 195

    Matrices 15-7 3 . Add the matr ices that yo u cre a t e d. M1 M2 To multiply and divide by a scalar For division by a scalar, enter the matrix first, then the operator, then the scalar. For multiplication, the order of the operands does not matter. The matrix and the scalar can be real or complex. For example, to divide the result of the previous e ...

  • HP 39gs - page 196

    15-8 Matr ices M1 2 To divide by a square matrix For division of a matrix or a vector by a square matrix, the number of rows of the dividend (or th e number of elements, if it is a vector) must equal the number of rows in the divisor. This operation is not a mathematical di vision: it is a left- multiplication by the inverse of th e divisor. M1/M2 ...

  • HP 39gs - page 197

    Matrices 15-9 2 . Cr eate the vec tor of the constants in the linear sys t em . 5 7 1 3 . R etur n to the Matri x Cat al og. MATRIX In this e x ample , the ve ctor y ou cr eated is listed a s M1. 4. Create a ne w matri x . Sele ct Real matrix 5 . Enter the equati on coeff ic ients . 23 4 11 1 4 12 In this e x ample , the matri x y ou c r eated is l ...

  • HP 39gs - page 198

    15-10 Matr ices Matrix functions and commands About functions • Fu n c t i o n s c a n b e u s e d i n a ny a p l e t o r i n H O M E. T h e y ar e listed in the MA TH menu unde r the Matr i x categor y . T h e y can be used in mathematical e xpr essi ons —pr imar ily in HOME—a s w ell as in pr ogr ams. • F unctions al wa ys pr oduce and di ...

  • HP 39gs - page 199

    Matrices 15-11 COND Condition Number. Finds the 1-norm (column norm) of a square matrix . COND ( matr i x ) CROSS Cross Product of vector1 with vecto r2 . CROSS ( vec to r 1 , ve ct or 2 ) DET Determinant of a square matrix . DET ( matr i x ) DOT Dot Product of two arrays, matrix1 matrix2 . DOT ( matr i x1, matr i x2 ) EIGENVAL Displays the eigenva ...

  • HP 39gs - page 200

    15-12 Matr ices LU LU Decomposition. Factors a square matrix into three matrices: {[[ lowertriangular ]],[[ uppertriangular ]],[[ permutation ]]} The uppertriangular has ones on its diagonal. LU ( matr ix ) MAKEMAT Make Matrix. Creates a matrix of dimension rows × columns , using expression to calculate each ele ment. If expression contains the va ...

  • HP 39gs - page 201

    Matrices 15-13 SPECNORM Spect ral Norm of matrix . SPECNORM ( matri x ) SPECRAD Spectral Radius o f a square matrix . SPECRAD ( matri x ) SVD Singular Value Decomp osition. Factors an m × n matrix into two matrices and a vector: {[[ m × m square orthogonal ]],[[ n × n square orthogonal ]], [ real ]}. SVD ( matr i x ) SVL Singular Values. Returns ...

  • HP 39gs - page 202

    15-14 Matr ices Trans posi ng a Matrix The TRN function swaps the row-column and column-row elements of a matrix. For instance, e lement 1,2 (row 1, column 2) is swapped with element 2,1; element 2,3 is swapped with element 3,2; and so on. For examp le, TRN([[1,2],[3,4]]) creates the matrix [[1,3],[2,4]] . Reduced-Row Echelon Form The following set ...

  • HP 39gs - page 203

    Matrices 15-15 The final row of zeros in the reduced-row echelon form of the augmented matrix indicates an inconsistent system with infinite solutio ns. HP 39gs English. book Page 15 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 204

    HP 39gs English. book Page 16 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 205

    Lists 16-1 16 L ists You can do list operations in HOME and in programs. A list consists of comma-separated real or complex numbers, expressions, or matr ices, all enclosed in braces . A list may, for example, contain a sequence of real numbers such as {1,2,3} . (If the Decimal Mark mode is set to Comma , then the separators are periods.) Lists rep ...

  • HP 39gs - page 206

    16-2 Lists 3 . E nter the values you want i n th e l ist, pressi ng after each one. V alue s can be r eal or comple x numbers (o r an expr ession) . If you enter a calc ulation , it is e valuated and the r esult is inserted in the list . 4. When done , pr ess LIST to see the List catalog, or pr ess to re turn to HO ME . List catalog ke ys The list ...

  • HP 39gs - page 207

    Lists 16-3 List edit keys When you press to create or change a list, the following keys are available to you: Create a list in HOME 1. Enter the list on the edit line . Start and end the list w ith br aces (the shifted and ke ys) and separ ate each element with a comma. 2 . Pr ess to ev a luate and display the list. Immediatel y after typing in the ...

  • HP 39gs - page 208

    16-4 Lists Displaying and editing lists To display a list • In the List cata log, hi ghlight the list name and pr ess . • In HOME , ente r the name of the list and pr ess . To display one element In HOME, enter listname ( element# ). For example, if L2 is {3,4,5,6}, then L2(2) returns 4 . To edit a list 1. Open th e L ist catalog. LIST . 2 . Pr ...

  • HP 39gs - page 209

    Lists 16-5 To insert an element in a list 1. Open the List catalog. LIST . 2. P r e s s o r t o highli ght the name of the list y ou wan t to edit (L1, etc .) and pre ss to displa y the list conten ts. New elements are inserted abov e the highlighted positi on . In this example, an element, with the value of 9, is inserted between the first and sec ...

  • HP 39gs - page 210

    16-6 Lists Deleting lists To delete a list In the List catalog, highli ght the list name and press . You are prompted to confirm that you want to delete the contents of the highlighted list variable. Press to delete the contents. To delete all lists In the List catalog, press CLEAR . Transmitting lists You can send lists to calculators or PCs just ...

  • HP 39gs - page 211

    Lists 16-7 CONCAT(L1,L2) . An ar gument can be either a list v ari able name (su ch as L1) or the actual list . F or e xample , REVERSE({1 ,2,3}) . • If Dec i mal Mark in Modes is set to C omma, u se peri ods to separat e ar guments. F or e x ample , CONCAT(L1.L2) . Common operators like +, –, ×, and / c an take lists as arguments. I f there a ...

  • HP 39gs - page 212

    16-8 Lists Example In HOME, store {3,5,8,12,17 ,23} in L5 and find the first differences for the list. { 3,5, 8,12 ,1 7 ,2 3 } L 5 L Select Δ LIST L5 MAKELIST Calculates a sequence of elements for a new list. Evaluates expression with variable from begin to end values, taken at increment steps. MAKELIST( expression , va ria b le , begin , end , in ...

  • HP 39gs - page 213

    Lists 16-9 position of the first occurrence is retu rned. A value of 0 is returned if there is no occurrence of the specified element. POS( list , element ) Example POS ({3, 7, 12, 19},12) returns 3 REVERSE Creates a list by reversing the order of the elements in a list. REVERSE( list ) SIZE Calculates the number of elements in a list. SIZE( list ) ...

  • HP 39gs - page 214

    16-10 Lists 2 . In HOME , st or e L1 into C1. Y ou w ill then be able to see the list data in the Numer ic vi e w of the Statis tics aplet . L1 C1 3 . S tart the Statis tic s aplet , and select 1-v ar ia ble mode (pr ess , i f necess ary , to displa y ) . Sele ct Statistics Note: Y our list values ar e no w in column 1 (C1) . 4. In the Sy mbolic v ...

  • HP 39gs - page 215

    Notes and sketches 17-1 17 Notes and sk etc hes Introduction The HP 39gs has text and pi cture editors for entering notes and sketche s. • E ach a plet has its o wn independent Note v iew and Sk etch vi e w . Not es and sk etc hes that y ou cr eate in these vi e ws ar e assoc iated w ith t he aplet. When y ou sa v e the aplet , or send it to anot ...

  • HP 39gs - page 216

    17-2 Notes and sketches Note edit keys Key M e a n i n g Space key for text entry. Displays next page of a multi-pa ge note. Alpha-lock for letter entry. Lower-case alpha-loc k for letter entry. Backspaces cursor and deletes character. Deletes current character. Starts a new line. CLEAR Erases the entire note. Menu for entering variable names, and ...

  • HP 39gs - page 217

    Notes and sketches 17-3 Aplet sketch view You can attach pictures to an aplet in its Sketch view ( SKETCH ). Y our wo rk is au tomaticall y sav e d w ith th e aplet . Press an y other vi e w ke y or to e x it the Sk etch v ie w Sketch keys To dr aw a li ne 1. In an aplet, pr ess SKETCH f or the Sk etch v iew . 2 . In Sk etch v iew , pr ess and mo v ...

  • HP 39gs - page 218

    17-4 Notes and sketches To draw a box 1. In Sk etc h vi e w , pres s and mov e the c urs or to wher e you w ant any corner of the bo x to be. 2. P r e s s . 3 . Mo v e the cur sor to mar k the opposite cor ner for the bo x . Y ou can adj ust the si ze of the bo x by mo v ing the cu rs o r . 4. Pres s to f inish the bo x . To draw a circle 1. In Ske ...

  • HP 39gs - page 219

    Notes and sketches 17-5 To label parts of a sketch 1. Pr ess and type the te xt on the edit line . T o lock the Alpha shift on , pre ss (for upper case) or (for lo w er cas e) . T o mak e the label a smalle r c har acte r si z e , turn o ff befo r e pres sing . ( i s a toggle betw een small and lar ge f ont si z e) . The smaller c har acter si z e ...

  • HP 39gs - page 220

    17-6 Notes and sketches To import a graphics variable You can copy the contents of a graphics variable into the Sketch view of an aplet. 1. Open the Sketch v iew of the aplet ( SKETCH ). T he graphi c w ill be copied her e. 2 . Pr ess , . 3 . Highlight Graphic , then pr ess and highligh t the name of the v ari able ( G1 , etc .) . 4. Pres s to r ec ...

  • HP 39gs - page 221

    Notes and sketches 17-7 4. W r ite y our note . See “Note e dit ke ys ” on page 17 - 2 for mor e infor mation on the entry and editing of notes. 5 . When yo u are f inis hed , press or an aplet ke y to e x it Notepad . Y our wor k is automaticall y sav ed. Notepad Catalog keys Key M e a n i n g Opens the selected note for editing. Begins a new ...

  • HP 39gs - page 222

    17-8 Notes and sketches To import a note You can import a note from the Notepad into an aplet’s Note view, and vice versa. Supp ose you want to copy a note named “Assignments” fr om the Notepad into the Function Note view: 1. In the Func tion aplet , display the No te v ie w ( NOTE ). 2 . Pr ess , highlight Notepad in the left column, then hi ...

  • HP 39gs - page 223

    Programming 18-1 18 Pr ogr amming Introduction This chapter describes how to pro gram using the hp 39gs. In this chapter you’ll learn about: • using the Pr ogram catalog to c r eate and edit pr ogr ams • pr ogr amming commands • stor ing and retr ie v ing var iables in pr ograms • pr ogr amming var iables. HINT More informatio n on progra ...

  • HP 39gs - page 224

    18-2 Programming Example RUN GETVALUE: RUN CALCULATE: RUN " SHOW ANSWER " : This program is separated into three main tasks, each an individual program. Within each progr am, the task can be simple—or it can be di vided further into other programs that perform smaller tasks. Program catalog The Program catalog is wher e you create, edit ...

  • HP 39gs - page 225

    Programming 18-3 Program catalog k eys The program catalog keys are: Key M e a n i n g Opens the highlighted program for editing. Prompts for a new program name, then opens an empty program. Transmits the highlighted program to another HP 39gs or to a disk drive. Receives the highlighted program from another HP 39gs or from a disk drive. Runs the h ...

  • HP 39gs - page 226

    18-4 Programming Creating and editing programs Create a new program 1. Pr ess PROGR M to open the Pr ogr am catalog . 2. P r e s s . The HP 3 9gs pr ompts yo u fo r a n a m e. A pr ogr am name can contain spec ial char acters , such as a space . Ho we ve r , if y ou use spec ial char acters and then run the pr ogr am b y typing it in HOME , y ou mu ...

  • HP 39gs - page 227

    Programming 18-5 2 . On the left, u se or to highligh t a command category , then pr ess to ac cess the commands in the category . Select the command that y ou w ant . 3 . Pr ess to paste the command into the pr ogram editor . Edit a program 1. Pres s PR OGRM to open the Pr ogram catalog. 2 . Use the arr o w k e y s to hi ghlight the pr ogram y ou ...

  • HP 39gs - page 228

    18-6 Programming Editing keys The editing keys are: Key M e a n i n g Inserts the character at the editing point. Inserts space into text. Display s previous page of the program. Displays next page of the program. Moves up or down one line. Moves right or left one character. Alpha-lock for letter entry. Press A...Z to lock lower case. Backspaces cu ...

  • HP 39gs - page 229

    Programming 18-7 Using programs Run a program From HOME, type RUN program_name. or From the Program catalog, highlight the program you want to run and press Regardless of where you star t the program, all programs run in HOME. What you see will differ slightly depending on where you started the program. If you start the program from HOME, the HP 39 ...

  • HP 39gs - page 230

    18-8 Programming Copy a program You can use the following procedure if you want to make a copy of y our work before editing—or if you want to use one program as a template for another. 1. Pr ess PROGR M to open the Pr ogr am catalog . 2. P r e s s . 3 . T ype a ne w f ile name, then c hoose . T he Progr am Edito r opens with a ne w pr ogr am . 4. ...

  • HP 39gs - page 231

    Programming 18-9 Delete a program To delete a program: 1. Pr ess PROGRM to open the Progr am catalog. 2 . Highligh t a pr ogr am to delet e , then pr ess . Delete all programs You can delete all programs at once. 1. In the Progr am catalog, pr ess CLEAR . 2. P r e s s . Delete the contents of a program You can clear t he contents of a program witho ...

  • HP 39gs - page 232

    18-10 Programming 4. D e v elop a pr ogram that u ses the SE TVI EW S command to modify the aplet’s VIEW S menu . The menu opti ons pr o v ide links to ass oc iated pr ograms . Y ou can spec i fy an y other progr ams that you w ant tr ansfe rr ed with the aplet . See “SETVIEW S” on page 18-14 for inf ormati on on the command . 5 . Ensur e tha ...

  • HP 39gs - page 233

    Programming 18-11 Save the aplet 1. Open the F uncti on aplet and sa ve it as “EXP ERIMENT ” . The ne w aplet appear s in the Aplet library . Select Function EXP ERIMENT 2 . Cr eate a pr ogr am called EXP .ME1 with contents as show n. T his pr ogr am conf igur es the plot r anges, then r uns a pr ogr am that allo ws y ou to s et the angle f orm ...

  • HP 39gs - page 234

    18-12 Programming 6 . Open the Pr ogram cat alog and cr eate a progr am named “EXP .S V” . Include the f ollo w ing code in the pr ogr am. E a c h entry line after the command SE T VIEW S is a tri o that consists of a VIEW S menu te xt li ne (a space indicate s none), a progr am name , and a number that def ines the v ie w to go to afte r the p ...

  • HP 39gs - page 235

    Programming 18-13 ’ ’ ’ ’ ;’ ’ EXP.ANG’ ’ ;0 ; The pr o gr am EXP .ANG is a small routine that is called by other pr ogr ams that the aplet us es . This e ntry spec ifi es that the pr ogr am EXP.ANG is transfer r ed w hen the aplet is tr ansfer r ed, bu t the space in the fir st quotes en sur es that no entry appears on the menu . ? ...

  • HP 39gs - page 236

    18-14 Programming Aplet commands CHECK Checks (selects) the correspon ding function in the current aplet. For example, Check 3 would check F3 if the current aplet is Function. T hen a checkmark would appear next to F3 in Symbolic view, F3 would be plotted in Plot view, and evaluated in Numeric view. CHECK n : SELECT Selects the named aplet and ma k ...

  • HP 39gs - page 237

    Programming 18-15 options u se , or the pr ogr am that def ines the a plet’s VIEW S menu . • Y ou can inclu de a “Start ” optio n in the VIEW S men u to spec if y a pr ogr am that y ou w ant to run auto maticall y when the aplet s tarts. This pr ogram typically sets up the aplet’ s initial confi guration . T he S T AR T option on the men ...

  • HP 39gs - page 238

    18-16 Programming ProgramName ProgramName is the name of the program that runs when the corresponding menu entry is selected. All pr ograms that are identified in the aplet’s SETV IEWS command are transferred when the aplet is transmitted. ViewNumber V iewNumber is the number of a view to start after the program finishes runn ing. For example, if ...

  • HP 39gs - page 239

    Programming 18-17 View numbers The Function aplet views are numbered as follows: View numbers from 15 on will vary according to the parent aplet. The list shown above is for the Function aplet. Whatever the normal VIEWS menu for the parent aplet, the first entry will become number 1 5, the second number 16 and so on. UNCHECK Unchecks (unselects) th ...

  • HP 39gs - page 240

    18-18 Programming Example 1  A : IF A==1 THEN MSGBOX " A EQUALS 1" : END: IF... THEN... ELSE... END Executes the true-clause sequence of commands if the test- clause is true, or the false-clause se quence of commands if the test-clause is false. IF test-clause THEN true-clause ELSE fals e-clause END Example 1  A : IF A==1 THEN MSGBO ...

  • HP 39gs - page 241

    Programming 18-19 IFERR...THEN...ELSE…END allows a program to intercept error conditions that otherwise would cause the program to abort. Its syntax is: IFERR tr ap-cla us e THEN clause _1 ELSE clause _2 END : Example IFERR 60/X  Y: THEN MSGBOX "Error: X is zero.": ELSE MSGBOX "Value is "Y: END: RUN Runs the named program. ...

  • HP 39gs - page 242

    18-20 Programming Example ARC 0;0;2;0;2 π : FREEZE: Dr a w s a c irc le center ed at (0, 0) of r adius 2 . T he FREEZE command causes the c ir cle to r emain di spla ye d on t he sc reen until y ou pr ess a k ey . BOX Draws a box with diagonally opposite corners ( x1,y1 ) and ( x2,y2 ). BOX x1 ; y1 ; x2 ; y2 : Example BOX -1;-1;1;1: FREEZE: Dr a w ...

  • HP 39gs - page 243

    Programming 18-21 Example TLINE 0;0;3;3: Er ase s pr e v iou sly dr a wn 4 5 degr ee line fr om (0, 0) to (3, 3) , or dr aw s that line if it doesn’t alr eady e xist . Graphic commands The graphic commands use th e graphics variables G0 through G9—or the Page variable from Sketch—as graphicname arguments. The position argument takes the form ...

  • HP 39gs - page 244

    18-22 Programming will superimpose G1 onto G0 starting a position (1,1), where the position is given in terms of the current axes settings, not as a pixel position. GROBXOR Usin g the logical XOR, superimposes graphicname2 onto graphicname1 . The upper left corner of graphicname2 is placed at position . GROBXOR gr aphi cname1 ; ( pos ition) ; gr ap ...

  • HP 39gs - page 245

    Programming 18-23 ZEROGROB Creates a blank graphic with given width and height , and stores i t in graphicname . ZEROGROB gr aphicname ; wid t h ; heigh t : Loop commands Loop hp allow a program to execute a routine repeatedly. The HP 39gs has three loop structures. The example programs below illustrate each of these structures incrementing the var ...

  • HP 39gs - page 246

    18-24 Programming Note that the STEP parameter is optional. If it is omitted, a step value of 1 is assumed. BREAK Terminates loop. BREAK: Matrix commands The matrix commands take variables M0–M9 as arguments. ADDCOL Add Column. Inserts values into a column before column_number in the specified matrix . You enter the values as a vector. The values ...

  • HP 39gs - page 247

    Programming 18-25 RANDMAT Creates random matrix with a specified number of rows and columns and stores the result in name ( name must be M0...M9 ). The entries will be integers ranging from –9 to 9. RANDMAT name ; rows ; columns : REDIM Redimensions the specified matrix or v ector to size . For a matrix, size is a list of two integers {n1,n2} . F ...

  • HP 39gs - page 248

    18-26 Programming Print commands These commands print to an HP infrared printer, for example the HP 82240B printer. PRDISPLAY Prints the contents of the display. PRDISPLAY: PRHISTORY Prints all objects in the hi story. PRHISTORY: PRVAR Prints name an d contents of variablename . PRVAR va ri ablename : You can also use the PRVAR comman d to print th ...

  • HP 39gs - page 249

    Programming 18-27 Example 3  A:CHOOSE A; "COMIC STRIPS"; "DILBERT"; "CALVIN&HOBBES"; "BLONDIE": CLRVAR Clears the specified va riable. The syntax is: CLR V AR v ari able : Example If you have stored {1,2,3,4} in variable L1, entering CLVAR L1 w ill clear L1. DISP Displays textitem in a row of the displ ...

  • HP 39gs - page 250

    18-28 Programming Example DISPXY –3.5;1.5;2;"HELLO WORLD": DISPTIME Displays the current date and time. DISPTIME To set the date and time, simply store the correct settings in the date and time variables. Use the following formats: M.DDYYYY for the date and H.MMSS for the time. Examples 5.152000  DATE( sets the date to May 15, 2000) ...

  • HP 39gs - page 251

    Programming 18-29 GETKEY Waits for a key, then st ores the k eycode rc.p in name, where r is row number, c is column number, and p is key- plane number. The key-planes numbers are: 1 for unshifted; 2 for shifted; 4 for alpha-shifted; and 5 for both alpha-shifted and shifted . GETKEY name : INPUT Creates an input form with a title bar and one field. ...

  • HP 39gs - page 252

    18-30 Programming PROMPT Displays an input box with name as the title, and prompts for a value for name . name can be a variable such as A…Z, θ , L1…l9, C1…C9 or Z1…Z9. PROMPT nam e : WAIT Halts program execution for the specified number of seconds. WAIT sec onds : Stat-One and Stat-Two commands The following commands are used for analyzin ...

  • HP 39gs - page 253

    Programming 18-31 Datasetname can be SI, S2,..., or S5 . Datasetname must include at least two pairs of data points. DO2VSTATS datasetname : SETDEPEND Sets datasetname dependent column . Datasetname can be S1, S2, …, or S5 and column can be C0–C9. SETDEPEND datasetname ; column : SETINDEP Sets datasetname independent column . Datasetname can be ...

  • HP 39gs - page 254

    18-32 Programming Plot-view variables Area Function Contains the last value found by the Area function in Plot- FCN menu. Axes All Aplets Turns axes on or off. From Plot Setup, check (o r uncheck) AXES . or In a program, type: 1  Axes —to turn axes on (def ault) . 0  Axes —to turn ax es off . Connect Function Parametric Polar Solve Statis ...

  • HP 39gs - page 255

    Programming 18-33 Grid All Aplets Turns the background grid in Plot view o n or off. From Plot setup, check (or uncheck) GRID . or In a program, type 1  Grid to tur n the gr id on . 0  Grid to tur n the gri d off (def ault). Hmin/Hmax Statistics Defines minimum and maximum values for histogram bars. From Plot Setup for one-variable statistics ...

  • HP 39gs - page 256

    18-34 Programming Isect Function Contains the last value found by the Intersection function in the Plot-FCN menu. Labels All Aplets Draws labels in Plot view showing X and Y ranges. From Plot Setup, check (o r uncheck) Labels or In a program, type 1  Labels —to turn labels on . 0  Labels —to turn labels o ff (def ault) . Nmin / Nmax Seque ...

  • HP 39gs - page 257

    Programming 18-35 S1mark–S5mark Statistics Sets the mark to use for scatter plots. From Plot Setup for two-variable statistics, S1mark- S5mark , then choose a mark. or In a program, type n  S1mark wh ere n is 1,2,3,...5 SeqPlot Sequence Enables you to choose types of sequence plot: Stairstep or Cobweb. From Plot Setup, select SeqPlot , then ch ...

  • HP 39gs - page 258

    18-36 Programming Umin/Umax Polar Sets the minimum and maxi mum independent values. Appears as the URNG field in the Plot Setup input form. From the Plot Setup input form, enter values for URNG . or In a program, type  Umin  Umax wher e Ustep Polar Sets the step size for an independent v ariable. From the Plot Setup input form, enter values f ...

  • HP 39gs - page 259

    Programming 18-37 Tstep Parametric Sets the step size for the independent variable. From the Plot Setup input form, enter values for TSTEP . or In a program, type n  Tstep wh ere Xcross All Aplets Sets the horizontal coordinate of the c rosshairs. Only works with TRACE off. In a program, type n  Xcross Ycross All Aplets Sets the vertical coor ...

  • HP 39gs - page 260

    18-38 Programming  Xmin  Xmax whe re Ymin / Ymax All Aplets Sets the minimum and maximum vertical values of the plot screen. Appears as the YRNG fields (vertical range) in the Plot Setup input form. From Plot Setup, enter the values for YRNG . or In a program, type  Ymin  Ymax whe re Xzoom All Aplets Sets the horizontal zoom factor. Fro ...

  • HP 39gs - page 261

    Programming 18-39 Symbolic-view variables Angle All Aplets Sets the angle mode. From Symbolic Setup, choose Degrees , Radia ns , or Grads for angle measure. or In a program, type 1  Angle —for De grees. 2  Angle —for Radian s. 3  Angle —for Grads. F1...F9, F0 Function Can contain any expression. Independent variable is X . Example &a ...

  • HP 39gs - page 262

    18-40 Programming S1fit...S5fit Statistics Sets the type of fit to be used by the FIT operation in drawing the regression line. From Symbolic Setup view, specify the fit in the field for S1FIT, S2FIT, etc. or In a program, store one of the fo llowing constant numbers or names into a variable S1fit , S2fit , etc. 1 Linear 2 LogFit 3 ExpFit 4 Power 5 ...

  • HP 39gs - page 263

    Programming 18-41 Numeric-view variables The following aplet variabl es control the Numeric view . The value of the variable appl ies to the current aplet only. C1...C9, C0 Statistics C0 through C9 , for column s of data. Can contain lists. Enter da ta in the N umeric view or In a program, type LIST  C n wh ere n = 0, 1, 2, 3 ... 9 Digits All Ap ...

  • HP 39gs - page 264

    18-42 Programming Note that if Fraction or M ixed Fraction is chosen, the setting will be ignored when labeling axes in Plot view. A setting of Scientific will be used instead. Example Scientific  Format or 3  Format NumCol All Aplets except Statistics aplet Sets the column to be highlighted in Numeric view. In a program, type n  NumCol wh ...

  • HP 39gs - page 265

    Programming 18-43 NumStep Function Parametric Polar Sequence Sets the step size (increment value) for an independent varia ble in N umeri c view. From Num Setup, enter a value for NU MSTEP . or In a program, type n  NumStep wh ere NumType Function Parametric Polar Sequence Sets the table format. From Num Setup, choose Automatic or Build You r Ow ...

  • HP 39gs - page 266

    Note variables The following aplet variable is available in Note view. NoteText All Aplets Use NoteText to recall text previously entered in Note view. Sketch variables The following aplet variables are available in Sk etch view. Page All Aplets Sets a page in a sketch set. The graphics can be viewed one at a time using the and keys. The Page var i ...

  • HP 39gs - page 267

    Extending aplets 19-1 19 Extending aplets Aplets are the application environments where you explore different cla sses of mathematical operations. You can extend the capabili ty of the HP 39gs in the following ways: • Cr eate ne w aplets , based on e x isting aplets , w ith spec ifi c conf igur ations suc h as angle measur e, gr aphical or tabula ...

  • HP 39gs - page 268

    19-2 Ext ending aple ts 1. Open the Solv e aplet and save it under the n e w name . Solve | T R I A N G L E S 2 . E nte r t h e fo ur form ul as : θ O H θ A H θ OA AB C 3 . Dec ide whether y ou want the a plet to oper ate in Degr ees , R adians , or Gr ads. MODES Degrees 4. Vie w the Aplet L i br ar y . The “ TRIANGLE S” aplet is listed in t ...

  • HP 39gs - page 269

    Extending aplets 19-3 Using a customized aplet To use the “T riangles” aplet, simply s elect the appropriate formula, change to the Numeric view and solve for the missing variable. Find the length of a ladder leaning against a vertical wall if it forms an angle of 35 o with the hori zontal and extends 5 metres up the wall. 1. Select the aplet . ...

  • HP 39gs - page 270

    19-4 Ext ending aple ts Annotating an aplet with notes The Note view ( NOTE ) attaches a note to the current aplet. See Chapter 17, “Notes and sketc hes”. Annotating an aplet with sketches The Sketch view ( SKETCH ) attaches a picture to the current aplet. See chapter 17, “Notes and sketches”. HINT Notes and s k et c hes th at y ou atta c h ...

  • HP 39gs - page 271

    Extending aplets 19-5 To transmit an aplet 1. Connect the P C or aplet disk dr iv e to the calc ulator by cable or align the tw o calc ulators ’ infr ar ed ports by matc hing up the tr iangle marks on the r ims of the calc ulators . P lace the calculato rs no mor e than 4 inches (10 cm) apar t. 2 . Sending calc ulator : Open the L ibrary , highli ...

  • HP 39gs - page 272

    19-6 Ext ending aple ts Note : ch oose a disk dri ve option if y ou are using the hp3 9gs connecti vity kit to tr ansfer the a plet . Hi ghlight y our selec tion and pr ess . The T r ansmit annu nc iator— —i s display e d until tr ansmis sion is co mplet e . If you are using the PC Connectivity Kit to download aplets from a PC, you will see a l ...

  • HP 39gs - page 273

    R-1 R Re fer ence inf ormation Glossary aplet A small application, limited to one topic. The built-in aplet types are Function, Parametric , Polar, Sequence, Solve, Statistics, Inference, Finance, Trig Explorer, Quad Explorer, Linear Solver and Triangle Solve. An aplet can be filled with the data and solutions for a specific problem. It is reusable ...

  • HP 39gs - page 274

    R-2 list A set of values separated by commas (periods if the Decimal Mark mode is set to Comma ) and enclosed in braces. Lists are commonly used to enter statistical data and to evaluate a function with multiple values. Created and manipulate d by the List editor and catalog. matrix A two-dimensional ar ray of values separated by commas (periods if ...

  • HP 39gs - page 275

    R-3 Resetting the HP 39gs If the calculator “locks up” and seems to be stuc k, you must reset it. This is much like resetting a PC. It cancels certain operations, restores ce rtain conditio ns, and clears temporary memory locations. However, it does not clear stored data (variables, ap let databases, programs) unless you use the proced ure, “ ...

  • HP 39gs - page 276

    R-4 If the calculator does not turn on If the HP 39gs does not turn on follow the steps below until the calculator turns on. You may find that the calculator turns on before you have completed the procedure. If the calculator still does not turn on, please contact Customer Support for further information. 1. Pr ess and hold the ke y for 10 seconds. ...

  • HP 39gs - page 277

    R-5 To install the main batteries a. Slide up the battery compartment cove r as illustrated. b. Insert 4 new AAA (LR03) batteries into the main compartment. Make sure each battery is inserted in the indicated direction. To install the backup battery a. Press down the holder. Push the plate to the shown direction and lift it. b. Insert a new CR2032 ...

  • HP 39gs - page 278

    R-6 Variables Home variables The home variables are: Categor y Available name Complex Z1 ... Z9 , Z0 Graphic G1 ... G9 , G0 Library Function Parametric Polar Sequence Solve Statistics User-named List L1 ... L9 , L0 Matrix M1 ... M9 , M0 Modes Ans Date HAngle HDigits HFormat Ierr Time Notepad User-named Program Editline User-named Real A...Z, θ HP ...

  • HP 39gs - page 279

    R-7 Function aplet variables The function aplet variables a re: Category Av ailable name Plot Axes Connect Coord FastRes Grid Indep InvCross Labels Recenter Simult Tracing Xcross Ycross Xtick Ytick Xmin Xmax Ymin Ymax Xzoom Yxoom Plot-FCN Area Extremum Isect Root Slope Symbolic Angle F1 F2 F3 F4 F5 F6 F7 F8 F9 F0 Nume ric Digits Format NumCol NumFo ...

  • HP 39gs - page 280

    R-8 Parametric aplet variables The parametric aplet variables are: Categor y Available name Plot Axes Connect Coord Grid Indep InvCross Labels Recenter Simult Tmin Tmax Tracing Tstep Xcross Ycross Xtick Ytick Xmin Xmax Ymin Ymax Xzoom Yzoom Symbolic Angle X1 Y1 X2 Y2 X3 Y3 X4 Y4 X5 Y5 X6 Y6 X7 Y7 X8 Y8 X9 Y9 X0 Y0 Numeric Digits Format NumCol NumFo ...

  • HP 39gs - page 281

    R-9 Polar aplet variables The polar aplet variables are: Category Av ailable names Plot Axes Connect Coord Grid Indep InvCross Labels Recenter Simult Umin Umax θ step Tracing Xcross Ycross Xtick Ytick Xmin Xmax Ymin Ymax Xzoom Yxoom Symbolic Angle R1 R2 R3 R4 R5 R6 R7 R8 R9 R0 Nume ric Digits Format NumCol NumFont NumIndep NumRow NumStart NumStep ...

  • HP 39gs - page 282

    R-10 Sequence aplet variables The sequence aplet variables are: Categor y Available name Plot Axes Coord Grid Indep InvCross Labels Nmin Nmax Recenter SeqPlot Simult Tracing Xcross Ycross Xtick Ytick Xmin Xmax Ymin Ymax Xzoom Yzoom Symbolic Angle U1 U2 U3 U4 U5 U6 U7 U8 U9 U0 Numeric Digits Format NumCol NumFont NumIndep NumRow NumStart NumStep Num ...

  • HP 39gs - page 283

    R-11 Solve aplet variables The solve aplet variables are: Category Av ailable name Plot Axes Connect Coord FastRes Grid Indep InvCross Labels Recenter Tracing Xcross Ycross Xtick Ytick Xmin Xmax Ymin Ymax Xzoom Yxoom Symbolic Angle E1 E2 E3 E4 E5 E6 E7 E8 E9 E0 Nume ric Digits Format NumCol NumRow Note NoteText Sketc h Page PageNum HP 39gs English. ...

  • HP 39gs - page 284

    R-12 Statistics aplet variables The statistics aplet variables are: Categor y Available name Plot Axes Connect Coord Grid Hmin Hmax Hwidth Indep InvCross Labels Recenter S1mark S2mark S3mark S4mark S5mark StatPlot Tracing Xcross Ycross Xtick Ytick Xmin Xmax Ymin Ymax Xzoom Yxoom Symbolic Angle S1fit S2fit S3fit S4fit S5fit Numeric C0,...C9 Digits F ...

  • HP 39gs - page 285

    R-13 MATH menu categories Math functions The math functions are: Category Av ailable name Calculus TAYLOR Complex ARG CONJ IM RE Constant e i MAXREAL MINREAL π Hyper b. ACOSH ASINH ATANH COSH SINH TANH ALOG EXP EXPM1 LNP1 List CONCAT Δ LIST MAKELIST π LIST POS REVERSE SIZE Σ LIST SORT Loop ITERATE RECURSE Σ ∂ ∫ HP 39gs English. book Page 1 ...

  • HP 39gs - page 286

    R-14 Matrix COLNORM COND CROSS DET DOT EIGENVAL EIGENVV IDENMAT INVERSE LQ LSQ LU MAKEMAT QR RANK ROWNORM RREF SCHUR SIZE SPECNORM SPECRAD SVD SVL TRACE TRN Polynom. POLYCOEF POLYEVAL POLYFORM POLYROOT Prob. COMB ! PERM RANDOM UTPC UTPF UTPN UTPT Real CEILING DEG → RAD FLOOR FNROOT FRAC HMS → → HMS INT MANT MAX MIN MOD % %CHANGE %TOTAL RAD ? ...

  • HP 39gs - page 287

    R-15 Program constants The program constants are: Tests < ≤ = = ≠ > ≥ AND IFTE NOT OR XOR Trig ACOT ACSC ASEC COT CSC SEC Category Av ailabl e name (Continued) Category Av ailable name Angle Degrees Grads Radians Format Standard Fixed Sci Eng Fraction SeqPlot Cobweb Stairstep S1...5fit Linear LogFit ExpFit Power Trigonometric QuadFit Cu ...

  • HP 39gs - page 288

    R-16 Physical Constants The physical constants are: Categor y Available Na me Chemist • Avogadro ( A v ogadr o ’s Number , NA) • Boltz . (Boltmann, k) • mol. vo... (molar v olume , Vm) • univ gas (uni ver sal gas , R) • std temp (standard temper a tur e , St d T ) • std pres (standar d pr essur e, St d P ) Phyics • Stef Bolt (Ste fa ...

  • HP 39gs - page 289

    R-17 Program commands The program commands are: Category Command Aplet CHECK SELECT SETVIEWS UNCHECK Branch IF THEN ELSE END CASE IFERR RUN STOP Drawing ARC BOX ERASE FREEZE LINE PIXOFF PIXON TLINE Graphic DISPLAY → → DISPLAY → GROB GROBNOT GROBOR GROBXOR MAKEGROB PLOT → → PLOT REPLACE SUB ZEROGROB Loop FOR = TO STEP END DO UNTIL END WHIL ...

  • HP 39gs - page 290

    R-18 Status messages Stat-Two DO2VSTATS SETDEPEND SETINDEP Category Command (Continued) Messag e Meaning Bad Argument Type Incorrect input for this operation. Bad Argument Value The value is out of range for this operation. Infinite Result Math exception, such as 1/0. Insufficient Memory You must recover some memory to continue operation. Delete on ...

  • HP 39gs - page 291

    R-19 Invalid Syntax The function or command you entered does not include the proper arguments or order of arguments. The delimiters (parentheses, commas, periods, and semi-colons) must also be correct. Look up the function name in the index to find its proper syntax. Name Conflict The | (wher e) function attempted to assign a value to the variable ...

  • HP 39gs - page 292

    HP 39gs English. book Page 20 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 293

    W-1 L imited W arr anty HP 39gs Graphing Calculator; Warranty peri od: 12 months 1. HP war r ants to you , the end- us er cu stomer , t hat HP har dw are , acc es sor ies and su pplies w i ll be fr ee fr om def ects in mater ials and w ork manship after the date of pur chase , for the peri od spec if ied abo v e . If HP r ecei ves notice of such de ...

  • HP 39gs - page 294

    W-2 6 . HP MAKE S NO O THER E XPRE S S W ARRANTY OR CONDI T ION WHET HER WRI TTEN OR OR AL . T O THE EXTENT ALL O WED B Y L OCAL LA W , ANY IMP LIED W ARRANTY OR CONDI TION OF MERCHANT ABILITY , S A T ISF A CT OR Y QU ALITY , OR FI TNE SS F OR A P AR TICUL AR P URP OSE I S LIMITED T O THE DUR A TION OF THE EXP RE S S W A RRANTY SET F OR TH ABO VE . ...

  • HP 39gs - page 295

    W-3 Service Europe Country : Telephone numbers Au str ia +4 3-1-3 60 2 77120 3 Belgium + 3 2 - 2 - 712 6 219 D e n m a r k + 45 - 8 -2 33284 4 Ea s te r n Eu ro p e countr ies +4 20-5- 414 2 2 5 2 3 Fi n l a n d + 35 - 8964 0 0 0 9 F r ance +3 3-1 - 4 9 9 3 9006 German y +4 9-6 9-9 5 30 7103 Gr eece +4 20 -5- 414 2 2 5 2 3 Holland +31- 2 -06 54 5 3 ...

  • HP 39gs - page 296

    W-4 P lease logon to http://www .hp.com f or t he lat est se r v ice and supp ort info rmati on .h L.Ame r ic a Country: T elephone nu mbers Ar gentina 0 -810 -5 5 5-5 5 20 Bra zil Sao P aulo 3 7 4 7 - 77 99; RO T C 0 -800 -15 77 51 M e xi c o M x C i t y 5 258 - 9 922; RO T C 01-800 - 4 7 2 -66 84 Ven e z u e l a 0 8 0 0 - 4 7 46 - 8368 Chi le 800 ...

  • HP 39gs - page 297

    W-5 Regulatory infor mation Federal Communications Commission Noti ce This equipment has been tested and found to comply with the limits for a Class B digital dev ice, pursuant to Part 15 of the FCC Rules. These limi ts are designed to provide reasonable protection agains t harmful interference in a residential installation. This equipment generate ...

  • HP 39gs - page 298

    W-6 Houston, Texas 77269-2000 Or, call 1-800-474-6836 For questions regarding this FCC declarati on, contact: Hewlett-Packard Company P. O. Box 692000, Mai l Stop 510101 Houston, Texas 77269-2000 Or, call 1-281-514-3333 To identify this produc t, refer to the part, series, or model number found on the product. Canadian Notice This Class B digital a ...

  • HP 39gs - page 299

    W-7 Korean Notice Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection poin ...

  • HP 39gs - page 300

    HP 39gs English. book Page 8 Wed nesday, December 7, 2 005 11:24 PM ...

  • HP 39gs - page 301

    I-1 Index A absolute value 13-5 add 13-3 algebraic entry 1-19 alpha characters typing 1-6 alphabetical so rting 19-6 angle measure 1-10 in statistics 10-12 setting 1-11 animation 17-5 creating 17 -5 annunciators 1-3 Ans (last answer) 1-24 antilogarithm 13-4 , 13-9 aplet attaching notes 19-4 clearing 19-3 copying 19-4 definition of R-1 deleting 19-6 ...

  • HP 39gs - page 302

    I-2 C calculus operat ions 13-7 catalogs 1-30 chronological sorting 19-6 circle dra wing 17-4 clearing aplet 19-3 character s 1-22 display 1- 22 display history 1-2 5 edit line 1-22 lists 16-6 plot 2-7 cobweb graph 6-1 coeffi cients polynomial 13-11 columns changing position 18-25 combinations 13 -12 commands aplet 18-14 branch 18-17 definition of ...

  • HP 39gs - page 303

    I-3 definite integral 13-6 deleting aplet 19-6 lists 16-6 matrices 15-5 programs 18- 9 statistical data 10-11 delimiters, programming 18-1 derivatives definition of 13-6 in Function aplet 13-22 in Home 13-21 determinant square matrix 15-11 differentiation 13-6 display 18-21 adjusting contrast 1-2 annunciator line 1-2 capture 18-21 clearing 1-2 date ...

  • HP 39gs - page 304

    I-4 font size change 3-8 , 17-5 forecasting 10-20 fraction number format 1-1 1 full-precision display 1-10 function analyze graph with FCN tools 3-4 definition 2-2 , R-1 entering 1-19 gamma 13- 12 intersection point 3-5 math menu R-13 slope 3-5 syntax 13-2 tracing 2-8 Function aplet 2-20 , 3-1 function variables area 18-32 axes 18-32 connect 18-32 ...

  • HP 39gs - page 305

    I-5 EXPM1 13-10 LNP1 13-10 SINH 13-9 TANH 13-9 hypothesis alternative 11-2 inference tests 11-8 null 11-2 tests 11-2 I i 13-8 implied multiplication 1-20 importing graphics 17-6 notes 17-8 increasing display contrast 1-2 indefinite integral using symbolic variables 13-23 independent values adding to table 2-18 independent variable defined for Traci ...

  • HP 39gs - page 306

    I-6 generate a series 16-8 list function syntax 16-6 list variables 16-1 returning position of element in 16-8 revers ing orde r in 16-9 sending and receiving 16-6 sorting elements 16-9 storing elements 16-1 , 16-4 , 16-5 storing one element 16 -6 logarithm 13-4 logarithmic fit 10-13 functions 13-3 logical operators AND 13-19 equals (logical test) ...

  • HP 39gs - page 307

    I-7 singular value decomposition 15-13 singular values 15-13 size 15-12 spectral norm 15-13 spectral radius 15-13 start Matrix Editor 18-2 4 storing elements 15-3 , 15-5 storing matrix elements 15-6 swap column 18-25 swap row 18-25 transposing 15-13 , 15-14 variables 15-1 matrix functions 15-10 COLNORM 15-10 COND 15-11 CROSS 15-1 1 DET 15-11 DOT 15 ...

  • HP 39gs - page 308

    I-8 recalc ulating 2-18 setup 2-16 , 2-19 O off automatic 1-1 power 1-1 on/cancel 1-1 One-Proportion Z-Interval 11- 17 One-Sample T-Interval 11-18 One-Sample T-Test 11-1 2 One-Sample Z-Interval 11-15 One-Sample Z-Test 11-8 order of precedence 1-21 overlaying plots 2-15 , 4-3 P π 13-8 paired columns 10-11 parametric variables axes 18-32 connect 18- ...

  • HP 39gs - page 309

    I-9 polynomial coefficients 13- 11 evaluation 13-11 form 13-11 roots 13-12 Taylor 13-7 polynomial functions POLYCOEF 13-11 POLYEVAL 13-11 POLYF ORM 13-11 POLYROOT 13-12 ports 19-5 position argument 18 -21 power (x raised to y) 13-5 preced ence 1-22 predicted values statistical 10-20 print contents of display 18-26 name and contents of variable 18-2 ...

  • HP 39gs - page 310

    I-10 regression analysis 10-17 fit models 10-13 formula 10-12 user-defined fit 10-13 relative error statistical 10-18 resetting aplet 19-3 calculator R-3 memory R-3 result copying to edit line 1-22 reusing 1-22 root interac tive 3-10 n th 13-6 variable 18-34 root-finding displaying 7-7 interac tive 3-9 operat ions 3-10 variables 3-10 S S1mark-S5mar ...

  • HP 39gs - page 311

    I-11 aplets in chronological order 19-6 elements in a list 16-9 spectral norm 15-13 spectral radius 15-13 square root 13-5 stack history printing 18-26 stairsteps graph 6-1 standard number format 1-10 statistics analysis 10 -1 analyzing plots 10-19 angle mode 10-12 calculate one-variable 18 -30 calculate two-variable 18 -30 data set variables 18-41 ...

  • HP 39gs - page 312

    I-12 setting 18-28 time, converting 13-14 times sign 1-20 tmax 18-36 tmin 18-36 too few arguments R-19 tracing functions 2-8 more than one curve 2-8 not matching plot 2-8 plots 2-8 transmitting lists 16-6 matrices 15-4 programs 18-8 transposing a matrix 15-13 Triangle Solver aplet 9-1 trigono metric fit 10-13 functions 13-19 scaling 2-10 , 2-14 , 2 ...

  • HP 39gs - page 313

    I-13 Z Z-Interval 11-15 zoom 2-17 axes 2-12 box 2-9 center 2-9 examples of 2-11 factors 2-13 in 2-9 options 2-9 , 3-8 options within a table 2-17 out 2-9 redrawing table of numbers op- tions 2-17 square 2-1 0 un-zoom 2-11 within Numeric view 2-17 X-zoom 2-9 Y-zoom 2-10 HP 39gs English. book Page 13 We dnesday, December 7, 2005 11:24 PM ...

  • HP 39gs - page 314

    HP 39gs English. book Page 14 We dnesday, December 7, 2005 11:24 PM ...

Manufacturer HP Category Calculator

Documents that we receive from a manufacturer of a HP 39gs can be divided into several groups. They are, among others:
- HP technical drawings
- 39gs manuals
- HP product data sheets
- information booklets
- or energy labels HP 39gs
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP 39gs.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP 39gs, service manual, brief instructions and user manuals HP 39gs. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP 39gs.

Similar manuals

A complete manual for the device HP 39gs, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP 39gs by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP 39gs.

A complete HP manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP 39gs - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP 39gs, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP 39gs, that we can find in the current document
3. Tips how to use the basic functions of the device HP 39gs - which should help us in our first steps of using HP 39gs
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP 39gs
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP 39gs in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP 39gs?

Use the form below

If you did not solve your problem by using a manual HP 39gs, ask a question using the form below. If a user had a similar problem with HP 39gs it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (1)

Дмитрий

Нужна инструкция на русском языке. Где я могу её найти.