English dropdown-ico

Manual Cisco Systems OL-16447-01

102 pages 4.73 mb
Download

Go to site of 102

Summary
  • Cisco Systems OL-16447-01 - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco ME 340 0E Ethernet A ccess S witc h Hardw are Installation Guide Febr uary 20 09 Text Part Number: OL -16447-01 ...

  • Cisco Systems OL-16447-01 - page 2

    THE SPECIFICATION S AND INFORMATION RE GARDING THE P RODUCTS IN THIS MA NUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY P ...

  • Cisco Systems OL-16447-01 - page 3

    iii Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 CONTENTS Preface vii Audience i-vii Purpose i-vii Related Publication s i-viii Obtaining Documentation and Submitting a Serv ice Request i-ix CHAPTER 1 Product Overview 1-1 Setting Up the Switch 1-1 Switch Mode ls 1-1 Front Panel 1-2 AC- and DC-Power Input Conn ectors ...

  • Cisco Systems OL-16447-01 - page 4

    Contents iv Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Verifying Switch Operation 2-5 Powering Off the Switch 2-5 Installing the Switch 2-5 Rack-Mounting 2-6 Removing Screws from the Switch 2-6 Attaching Brackets to the Switch 2-7 Mounting in a Rack 2-13 Wall-Mounting 2-14 Attaching Brackets for Wall-Mounting 2- ...

  • Cisco Systems OL-16447-01 - page 5

    Contents v Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Power Supply Settings 3-17 CHAPTER 4 Troubleshooting 4-1 Diagnosing Problems 4-1 Switch POST Results 4-1 Switch LEDs 4-2 Switch Connections 4-2 Bad or Damaged Ca ble 4-2 Ethernet and Fiber Cab les 4-2 Link Status 4-2 SFP Module Port Issues 4-3 Port and Interfac ...

  • Cisco Systems OL-16447-01 - page 6

    Contents vi Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 APPENDIX C Configuring the Switch with the CLI-Based Setup Program C-1 Accessing the CLI Through the Console Port C-1 Starting the Terminal-Emu lation Software C-1 Entering the In itial Configuration Information C-2 IP Settings C-2 Completing the Setup Progr ...

  • Cisco Systems OL-16447-01 - page 7

    vii Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Preface Audience This guide is for th e networking or computer technician installing the Ci sco Metro Ethernet (ME) 3400E Series Ethernet Access switch, also known as the switch. W e assume that you are fa miliar with the concepts and termi nology of Ethernet an d loc ...

  • Cisco Systems OL-16447-01 - page 8

    viii Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Preface Related Publications The safety warnings for this product are translat ed into se veral lang uages in the Re gulatory Compliance and Safety Information for the Cisco ME 3400E Ethernet Acces s Switches t hat ships with the prod uct on the documentation CD. T ...

  • Cisco Systems OL-16447-01 - page 9

    ix Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Preface Obtaining Do cumentatio n and Submitting a Service Request • Cisco Small F orm-F actor Plugga ble Modules Compatibility Ma trix • Compatibility Ma trix for 1000B ASE-T Small F orm-F actor Plug gable Modules Obtaining Documentation and Submitting a Service R ...

  • Cisco Systems OL-16447-01 - page 10

    x Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Preface Obtaining Documentation an d Submitting a Se rvice Request ...

  • Cisco Systems OL-16447-01 - page 11

    CH A P T E R 1-1 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 1 Product Overview The Cisco Metro Ethernet (ME) 3400E Et hernet Access switch—referred to as the switch —is an Ethernet access switch that you can connect to other net wor k de vices, such as ro uters, other switches, a home access gateway (HA G), o ...

  • Cisco Systems OL-16447-01 - page 12

    1-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Front Pan el Front Panel Figure 1-1 sho ws the Cisco ME 3400E-24TS- M front panel. The 10/100 F ast Ethernet do wnlink p orts are grouped in pairs. The first member o f the pair (port 1) is abov e the second member (port 2) on the left. Po ...

  • Cisco Systems OL-16447-01 - page 13

    1-3 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Front Panel The Cisco ME 3400EG-12CS-M has 12 dual-purpose port s, numbered 1 to 12, and supports both A C and DC po wer . Y ou can conf igure these as ei ther copper-based 10/ 100/1000 ports or as f iber -optic SFP-module ports. The Gigab ...

  • Cisco Systems OL-16447-01 - page 14

    1-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Front Pan el Figur e 1 -3 Cisco ME 3400EG-2CS-A Fr ont P anel AC- and DC-Power Input Connectors The Cisco ME 3400E-24TS-M and the Cisco ME 3 400 EG-12CS support combi nations of po wer-sup ply modules: tw o A C, two DC, or one A C and one ...

  • Cisco Systems OL-16447-01 - page 15

    1-5 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Front Panel Management Port Y ou can connect the switch to a host such as a Wi ndo ws work station or a terminal serv er through the 10/100 Eth ernet management po rt or the console port. Th e 10/100 Ethernet management port conn ection us ...

  • Cisco Systems OL-16447-01 - page 16

    1-6 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Front Pan el For more inf ormation on confi guring interf aces, see the switch software conf iguration g uide. Note The Cisco ME 3400E-24TS-M does not support 1000 B ASE-T SFP modules. For more informati on about SFP modules, see your SFP ...

  • Cisco Systems OL-16447-01 - page 17

    1-7 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Front Panel See the “Inserting and Removing the SFP Modu le P atch Cable” section on page 2-21 for more information about using the SFP module patch cable. Y ou can order the SFP module patch cable (part number CAB-SFP-50CM=). UNIs, NN ...

  • Cisco Systems OL-16447-01 - page 18

    1-8 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Front Pan el Switch LED Panels Figur e 1 -5 Cisco ME 3400E-24TS-M a nd Cisco ME 3400EG-12CS-M Syst em and Alar m LEDs Figur e 1 -6 Cisco ME 3400EG-2CS-A Syst em and Alar m LEDs 1 SYST (system) LED 5 ALM 1 (alarm 1) LED 2 PSU 1 (power suppl ...

  • Cisco Systems OL-16447-01 - page 19

    1-9 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Front Panel Power-Supply Module LEDs The power -supply modul e LEDs sho w whether power-supply modules 1 and 2 are recei ving power . Figur e 1 -7 Switc h P o wer -Supply LEDs The Cisco ME 3400E-24TS-M and the Cisco ME 3400EG -12CS-M hav e ...

  • Cisco Systems OL-16447-01 - page 20

    1-10 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Front Pan el When an A C-po wer -supply module is installed, th e A C 1 and A C 2 LEDs sho w which po wer supply is on (see Figure 1-7 ). When DC-po wer-sup ply modules are installed, the DC A and DC B LEDs sho w which po wer suppl y is o ...

  • Cisco Systems OL-16447-01 - page 21

    1-11 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Front Panel Alarm LEDs Port LEDs Each RJ-45 port and SFP-mo dule slot has a port LED. These port LEDs, as a group or indi vidually , display information abo ut the switch and about the i ndi vidual ports. Dual-Purpose Port LEDs The dual-p ...

  • Cisco Systems OL-16447-01 - page 22

    1-12 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Rear Panel Figur e 1 -8 Example of the Switch Dual-P ur pose P or t LEDs Rear Panel The rear panel on the Cisco ME 3400 E-24TS-M and the Cisco ME 3400EG-12CS-M has tw o po wer-sup ply slots for installing t he remov able po wer suppli es ...

  • Cisco Systems OL-16447-01 - page 23

    1-13 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Power Supply Features Figur e 1 -1 0 Cisco ME 3400E-24TS-M an d Cisco ME340 0EG-12CS-M Rear P anels Figur e 1 -1 1 Cisco ME 3400EG-2CS-A Rear Panel Power Supply Features The Cisco ME 3400E-24TS-M and Cisco ME 3400E G-12CS-M suppor t two m ...

  • Cisco Systems OL-16447-01 - page 24

    1-14 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Fans Fans Air flo w on an ME-3400E-24TS-M is front to back. Figur e 1 -12 ME-3400E-2 4TS-M Air Flo w The switch can operate with only one fan. F or maximum ef ficiency , at least two of the four fans should be operational in a warm en vir ...

  • Cisco Systems OL-16447-01 - page 25

    1-15 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 1 Product Overvie w Management Options Network Configurations See the switch softwa re confi guration guide on Cisco.com for an explan ation of network configurat ion concepts. The software configuratio n guide also p rovides e xamples of netwo rk configurat ...

  • Cisco Systems OL-16447-01 - page 26

    1-16 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 1 Product Overview Management Options ...

  • Cisco Systems OL-16447-01 - page 27

    CH A P T E R 2-1 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 2 Switch Installation Read the topics and perform th e procedures in this order: • W arnings, page 2-1 • Installation Guidelines, p age 2-4 • V erifying Switch Op eration, page 2-5 • Installing the Swit ch, page 2-5 • Installing and Removing SF ...

  • Cisco Systems OL-16447-01 - page 28

    2-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Warnings War ni ng Blank faceplates (fill er panels) serve three importan t functions: they prevent ex posure to hazardous voltages and currents inside the chassis; they contain electromagnet ic interference (EMI) that might disrupt ot ...

  • Cisco Systems OL-16447-01 - page 29

    2-3 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Warnin gs War ni ng The plug-socket comb ination must be accessible a t all times, because it serves as the main disconnecting device. Statement 1019 War ni ng This equipment must be grounde d. Never defeat the ground conductor or operat ...

  • Cisco Systems OL-16447-01 - page 30

    2-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installation Guidelines These warning statements ap ply to the Cisco ME 3400E-24TS-M an d the Cisco ME 3400EG-12CS-M: War ni ng T o prevent the sy stem from overheatin g, do not operate it in an area that exceeds the max imum recommend ...

  • Cisco Systems OL-16447-01 - page 31

    2-5 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Verifying Switch Operation Verifying Switch Operation Before installing the switch in a r ack, on a wall, on a table, or o n a shelf, you should po wer the switch and verify that the switch passe s the po wer-on self-test (POST) . • T ...

  • Cisco Systems OL-16447-01 - page 32

    2-6 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch Rack-Mounting T o install the sw itch in a 19-inch, 23 -inch, 24-i nch rack, or a European T e lecommunications Stand ards Institute (ETSI) rack, follo w these instructions. (T he 24-inch rack s and the ETSI racks ...

  • Cisco Systems OL-16447-01 - page 33

    2-7 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing the Switch Attaching Brackets to the Switch The bracket orientation an d the brackets that you us e depend on whether you ar e attaching the brackets for a 19-inch, 23-inch, 24-inch, or an ETSI rack. Figure 2-3 sho ws the stan ...

  • Cisco Systems OL-16447-01 - page 34

    2-8 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch • For 24-inch racks, use part number RC KMNT -24IN-1R U (700-132 48-XX), and see Figure 2-7 on page 2-11 . • For ETSI racks, use part number RCKMNT -ETSI-1RU= (700-19781-XX), and see Figure 2-8 on page 2-12 . ...

  • Cisco Systems OL-16447-01 - page 35

    2-9 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing the Switch Attaching Brackets on Cisco ME 3400EG-2CS-A for 19-Inc h, 23-Inch, and 24-Inch Racks Figure 2-5 sho ws ho w to use the tab o n the bracket and the Phil lips flat-head scre w to attach the sho rt side of each bracket ...

  • Cisco Systems OL-16447-01 - page 36

    2-10 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch Attaching Brackets for 23-Inch Racks Figure 2-6 sho ws ho w to attach brackets for the 23 -inch racks on all switches except the Cisco ME 3400EG-2CS-A. Figure 2-6 Att aching Br ack ets f or 23-Inch Rac ks 1 Phill ...

  • Cisco Systems OL-16447-01 - page 37

    2-11 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing the Switch Attaching Brackets for 24-Inch Racks Figure 2-7 sho ws how to attach brack ets for the 24 -inch racks on all switc hes except the Cisco ME 3400EG-2CS-A. Figure 2-7 Att aching Br ack ets f or 24-Inch Rac ks 1 Philli ...

  • Cisco Systems OL-16447-01 - page 38

    2-12 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch Attaching Brackets for ETSI Racks Figure 2-8 sho ws how to attach brack ets for the ETSI racks on all switches except the Cisco ME 3400EG-2CS-A. Figur e 2-8 Att aching Br ack ets f or ETSI Racks 1 Phillips flat-h ...

  • Cisco Systems OL-16447-01 - page 39

    2-13 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing the Switch Mounting in a Rack After the brackets are attached on the switc h, use th e four supplied number-12 Phi llips machine scre ws to securely attach the br ackets to the rack. See Figure 2-9 . Figur e 2-9 Mounting in a ...

  • Cisco Systems OL-16447-01 - page 40

    2-14 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch After the switch is mounted in t he rack, you need to do these tasks to co mplete the installati on: • Po wer on the switch. See the “V erifying Switch Opera tion” section on page 2-5 . • Connect to the R ...

  • Cisco Systems OL-16447-01 - page 41

    2-15 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing the Switch Figur e 2-12 Attac hing 19-inc h Br ack ets t o W all-Mount Cisco ME 3400EG-2CS-A Mounting the Switch on a Wall For the best sup port of the switch and cabl es, make sure that the switch is attached securely to wal ...

  • Cisco Systems OL-16447-01 - page 42

    2-16 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch Cisco ME 3400EG-12CS-M Mount the swi tch with the front pa nel facing down ( Figure 2-13 ). Figur e 2-13 Mounti ng Cisco ME 3400EG-12CS-M on a W all 1 User- supplied scre ws 2 8 0 8 4 3 1 1 P SU O K + 2 4 V -4 8 ...

  • Cisco Systems OL-16447-01 - page 43

    2-17 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing the Switch Cisco ME 3400E-24TS-M Mount the switch with t he side panel facing up ( Figure 2-14 ). Figur e 2-14 Mounti ng Cisco ME 3400E-24TS-M on a W all 1 User- supplied scre ws 205716 PSU OK +24V -4 8 V DC PSU OK +24V -4 8 ...

  • Cisco Systems OL-16447-01 - page 44

    2-18 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing the Switch Cisco ME 3400EG-2CS-A Mount the switch with t he side panel facing up ( Figure 2-15 ). Caution The side that has the air vents must face up. Figur e 2-15 Mounting the Cisco ME 340 0EG-2CS-A on a W all Y ou need t ...

  • Cisco Systems OL-16447-01 - page 45

    2-19 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Installing and Removing SFP Modu les • Connect to the front -p anel ports. See the “Connecting to the 10/10 0 and 10/100/1000 Ports” section on page 2-22 , the “Connecting to Fib er-Opti c SFP Modules” section on page 2-24 , a ...

  • Cisco Systems OL-16447-01 - page 46

    2-20 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Installing and Remo ving SFP Modules Figur e 2-16 SFP Module with a Bale-Clasp Latch Step 1 Attach an ESD-pre venti v e wrist strap to your wrist and to a bare metal surface. Step 2 Find the send (TX) and recei ve (RX) mark ings that ...

  • Cisco Systems OL-16447-01 - page 47

    2-21 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Inserting and Removing the SFP Mo dule Patch Cable Removing SFP Modules Step 1 Attach an ESD-pre venti v e wrist strap to your wrist and to a bare metal surface. Step 2 Disconnect the cable from the SFP module. For reat tach ment, note ...

  • Cisco Systems OL-16447-01 - page 48

    2-22 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Connecting to the 10/100 and 10/100/1000 Ports Figur e 2-19 Inser ting an SFP Module P atch Cable int o an SFP Module Slo t Step 3 Repeat these steps for the second switch to which you want to connect the f irst switch. Figur e 2-20 C ...

  • Cisco Systems OL-16447-01 - page 49

    2-23 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Connecting to the 10/100 and 10/100/1000 Ports Follo w these steps to co nnect to 10B ASE-T , 100B ASE-TX, or 10 00-B ASE-T de vices: Step 1 When connecting to workstations, servers, and routers, connec t a straight-through c able to an ...

  • Cisco Systems OL-16447-01 - page 50

    2-24 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Connecting to Fiber-Op tic SFP Modules Connecting to Fiber-Optic SFP Modules War ni ng Class 1 laser product. Statement 1008 Caution Do not remov e the rubber plugs from the SFP module port or the rubber caps from the f iber-opti c ca ...

  • Cisco Systems OL-16447-01 - page 51

    2-25 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 2 Switch Installation Connecting to 1000 BASE-T SFP Modules Connecting to 1000BASE-T SFP Modules Follo w these steps to conn ect a Category 5 or higher cable to a 1000B ASE-T SFP module (see Figure 2-23 ): Figur e 2-23 Connecting to a 1 00 0BASE-T SFP Module ...

  • Cisco Systems OL-16447-01 - page 52

    2-26 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 2 Switch Installatio n Connecting to Dual-P urpose Ports Connecting to Dual-Purpose Ports Step 1 Insert an RJ-45 connector or an SFP module in the port. See Figure 2-24 . For more information about RJ-45 connectors and SFP modul es, see the “Connecting to ...

  • Cisco Systems OL-16447-01 - page 53

    CH A P T E R 3-1 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 3 Installing and Removing AC- and DC-Power-Supply Modules This chapter pro vides the instal lation and remov a l instru ctions for the A C- and DC-po wer -supply modules for the Cisco ME 34 00E-24TS-M and the Cisc o ME 3400EG-12CS-M. Y our switc h ships ...

  • Cisco Systems OL-16447-01 - page 54

    3-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Product Over view The A C-po wer -supply modules ship wit h a power cord to connect to an A C-power outlet. The DC-po wer-sup ply module ships with a terminal block to be wired for DC-po wer outlet ...

  • Cisco Systems OL-16447-01 - page 55

    3-3 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Product Overview Figure 3-2 80-W DC-P o wer -S upply Module Handle Side Figure 3-3 sho ws the DC-po wer -supply module PSU OK LED and the DC-v oltage selector . • For telecom appl ications (–36 t ...

  • Cisco Systems OL-16447-01 - page 56

    3-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Connector-Side Description Figure 3-4 sho ws the connector side of the power-supply module, which connects to the switch rear panel through i ts po wer-su pply slot ...

  • Cisco Systems OL-16447-01 - page 57

    3-5 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power-Supply Module Installation Tools and Equipment Obtain these necessary tools and equipment: • Ratcheting torque scre wdri v er with a number -2 Phillips head that e xerts up to 15 inch-pounds ( ...

  • Cisco Systems OL-16447-01 - page 58

    3-6 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Figur e 3-5 Blank Co v er Installed on the P ower -Supply Slot Installing an AC-Power-Supply Module This procedure is for instal ling an A C-po wer -supply module i ...

  • Cisco Systems OL-16447-01 - page 59

    3-7 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power-Supply Module Installation Step 3 Align the tw o captiv e scre ws with the scre w holes i n the panel. Use a ratcheting torque scre wdri v er to torque each scre w to 10 in-lb . Step 4 Connect t ...

  • Cisco Systems OL-16447-01 - page 60

    3-8 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Installing a DC-Power-Supply Module This procedure is for i nstalling an DC-po wer-su pply module into the PSU 1 p ower -supply slot. Repeat these steps to install ...

  • Cisco Systems OL-16447-01 - page 61

    3-9 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power-Supply Module Installation Each DC-po wer input (A ± and B ±) i s connected to both po wer -supply module 1 (PSU 1) and po wer-supply module 2 (PSU 2). The po wer -supply modules cannot be p o ...

  • Cisco Systems OL-16447-01 - page 62

    3-10 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Caution T o make sure t hat the equipment is reliably connect ed to earth ground, follo w the grounding procedure instructions, and use a UL-listed lu g suitable f ...

  • Cisco Systems OL-16447-01 - page 63

    3-11 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power-Supply Module Installation Figure 3-12 Attac hing the Grou nd Lug and Wir e Assembly Installing the DC-Power-Su pply Module in the Switch Step 1 V erify that po wer is of f at the DC circuits. ...

  • Cisco Systems OL-16447-01 - page 64

    3-12 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Figur e 3-14 DC-V oltage Selector Step 5 Connect the input po wer as described in the “W iring the DC-Input Po wer Source” section. Wiring the DC-In put Power ...

  • Cisco Systems OL-16447-01 - page 65

    3-13 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power-Supply Module Installation Step 1 T o ensure th at all po wer is OFF , locate the circ uit break er on the panel board that serv ices the DC ci rcuit, switch the circuit breaker to the O FF pos ...

  • Cisco Systems OL-16447-01 - page 66

    3-14 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Figur e 3-18 Inserting Wir es in the T e r minal Bloc k Plug Step 6 Use a ratcheting torque scre wdri ver to torque the terminal bloc k captiv e scre w (abo ve the ...

  • Cisco Systems OL-16447-01 - page 67

    3-15 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power-Supply Module Installation Figur e 3-20 Completed Wir ing of T er minal Bloc k Plug f or T elecom Applications Step 8 Insert the termin al block plug in th e terminal block head er on the switc ...

  • Cisco Systems OL-16447-01 - page 68

    3-16 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power-Supply Modu le Installation Step 12 Confirm that both the DCA LED a nd the PSU 1 LEDs are green. (If you can access the switch rear panel, verify that the power -supply module PSU OK LED is g ...

  • Cisco Systems OL-16447-01 - page 69

    3-17 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 Chapter 3 Installing and Remo ving AC- and DC-Power-Supply Modules Power Supply Settings Power Supply Settings • Use the no power -supply glob al conf iguration command (the def ault) when installing on e po wer-sup ply module. The switch does not send an alarm wh ...

  • Cisco Systems OL-16447-01 - page 70

    3-18 Cisco ME 3400E Ethernet Access Sw itch Hardware In stallation Guide OL-16447-01 Chapter 3 Installing a nd Removing AC- and D C-Power-Supply Modules Power Supply Settings ...

  • Cisco Systems OL-16447-01 - page 71

    CH A P T E R 4-1 Cisco ME 3400E Ethernet Access Swit ch Hardware Installation Guide OL-16447-01 4 Troubleshooting • Diagnosing Problems, page 4-1 • Clearing the Switch IP Ad dress and Conf iguration, page 4-4 • Finding the Switch Serial Numb er , page 4-5 Diagnosing Problems The LEDs on the fro nt panel prov ide troubleshooting in formation a ...

  • Cisco Systems OL-16447-01 - page 72

    4-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix 4 Tro ubleshooting Diagnosing Prob lems Switch LEDs Y ou must ha ve physical access to the switch to do this. Look at the port LEDs for troubleshooting information about the switch. See the “LEDs” section on page 1-7 for a descri ption of the LED color ...

  • Cisco Systems OL-16447-01 - page 73

    4-3 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix 4 Troubleshooting Diagnosing Problems • V erify that you are using th e correct cabl e type. See Appendix B, “Con nector and Cable Specif ications, ” for more information. • Look for loose connections. Somet imes a cable appears to be seated, but is n ...

  • Cisco Systems OL-16447-01 - page 74

    4-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix 4 Tro ubleshooting Clearing the Switch IP Ad dress and Configuration Switch Performance Speed, Duplex, and Autonegotiation If the port stat istics sho w a lar ge amount of alignment errors , frame check sequenc e (FCS), or late-collisions errors, this migh ...

  • Cisco Systems OL-16447-01 - page 75

    4-5 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix 4 Troubleshooting Finding the Switch Serial Number T o reset the switch: 1. At the switch prompt, enter ena ble , and press Return or Enter . 2. At the pri vile ged EXEC prompt, switc h# , enter setup , and press Return or Enter . The switch displays the prom ...

  • Cisco Systems OL-16447-01 - page 76

    4-6 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix 4 Tro ubleshooting Finding the Swit ch Serial Number ...

  • Cisco Systems OL-16447-01 - page 77

    A-1 Cisco ME 3400E Ethernet Acc ess Switch Hardware Installation Guide OL-16447-01 APPENDIX A Technical Specifications • En vironmental Ranges and T echnical Specificati ons for the Switch • En vironmental and T echni cal Specifications for the Power -Supply Modules Environmental Ranges and Technical Specifications for the Switch The operating ...

  • Cisco Systems OL-16447-01 - page 78

    A-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix A Technical Specificatio ns Environmental Ranges and Technical Specifications for the Switch GLC-ZX-SM Ye s No GLC-BX-D Ye s No GLC-BX-U Ye s No GLC-T Ye s No CWDM-xxxx-SFP Ye s No D WDM-xxxx-SFP Ye s No SFP-GE-S Ye s Ye s SFP-GE-L Ye s Ye s SFP-GE-T Ye s ...

  • Cisco Systems OL-16447-01 - page 79

    A-3 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix A Technical Specifications Environmental Ranges and Te chnical Specifications for the Switch T able A -4 Operating T emper atu res f or the Cisco ME 3400EG-12CS-M SFP Module 32 to 131°F (0 to 55°C) with 1 Power -Supply Module 32 to 140°F (0 to 60°C) with ...

  • Cisco Systems OL-16447-01 - page 80

    A-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix A Technical Specificatio ns Environmental Ranges and Technical Specifications for the Switch Note If you install o ne A C- and o ne DC-pow er-sup ply module in a switch, the po wer specif ications are similar to installing tw o DC-po wer -supply modules. T ...

  • Cisco Systems OL-16447-01 - page 81

    A-5 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix A Technical Specifications Environmental Ranges and Te chnical Specifications for the Switch Note If you install o ne A C- and one DC-po wer -supply mo dule in a switch, the po wer specifications are simil ar to installing tw o DC-po wer -supply modules. T ab ...

  • Cisco Systems OL-16447-01 - page 82

    A-6 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix A Technical Specificatio ns Environmental and T echnical Specifications for the Power-Supply Modules Environmental and Technical Specifications for the Power-Supply Modules T able A -7 T echnical Specifications for the Cisco ME 3 40 0 EG -2 CS - A Phy sica ...

  • Cisco Systems OL-16447-01 - page 83

    A-7 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix A Technical Specifications Environmental a nd Technical Specifications for the Power -Supply Modules T able A -1 0 T echnical Specif ications fo r the Cisco ME340X-PWR-DC P o w er -Supply Modul e Power Specifications Maximum output po wer 80 W Input voltage r ...

  • Cisco Systems OL-16447-01 - page 84

    A-8 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix A Technical Specificatio ns Environmental and T echnical Specifications for the Power-Supply Modules ...

  • Cisco Systems OL-16447-01 - page 85

    B-1 Cisco ME 3400E Ethernet Acc ess Switch Hardware Installation Guide OL-16447-01 APPENDIX B Connector and Cab le Specifications • Connector Specif ications, page B-1 • Cables and Adap ters, page B-4 Connector Specifications • 10/100, page B-1 • SFP Module Connectors, page B-2 • Dual-Purpose Ports, page B-3 • 10/100 Ethernet Management ...

  • Cisco Systems OL-16447-01 - page 86

    B-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix B Connec tor and Cable Specificatio ns Connector Specifications When connecting 10/100 po rts to compatible de vices su ch as servers, workstations, and routers, you can use a two or four t wisted-pair straight-throug h cable wired for 10B ASE-T and 100B A ...

  • Cisco Systems OL-16447-01 - page 87

    B-3 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix B Connector and Cable Specifications Connector Specifications Dual-Purpose Ports The 10/100/1000 Ethernet p orts on the dual-purpose ports use standard RJ-45 connectors. Figure B-3 1 0/1 00/1 00 0 P ort Pinouts 10/100 Ethernet Management Port The 10/100 Ether ...

  • Cisco Systems OL-16447-01 - page 88

    B-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix B Connec tor and Cable Specificatio ns Cables and Adapters Figure B-5 Alarm Input Por t Pinout s Cables and Adapters • SFP Module Cables, page B-4 • Cable Pinouts, page B-6 • Console Port Adapter Pinout s, page B-7 SFP Module Cables Each port must ma ...

  • Cisco Systems OL-16447-01 - page 89

    B-5 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix B Connector and Cable Specifications Cables and Adapters Note When the fiber-optic cable span is less than 15.4 3 miles (25 km), you should in sert a 5-decibel (dB) or 10-dB inline optical attenuat or between the f iber-o ptic cable plant and the r eceiving p ...

  • Cisco Systems OL-16447-01 - page 90

    B-6 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix B Connec tor and Cable Specificatio ns Cables and Adapters Cable Pinouts Figure B-6 T wo T wisted-P air Straight-Through Cable Schematic Figure B-7 T wo T wisted-P air Crosso ver Cable Schematic Figur e B-8 Four T wist ed-P air Straig ht-Throu gh Cable Sch ...

  • Cisco Systems OL-16447-01 - page 91

    B-7 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix B Connector and Cable Specifications Cables and Adapters T o identify a cr ossover cable, comp are the two modu lar ends of the cable. Hold the cable end s side-by-sid e, with the tab at the back . The wire connected to pin 1 on the left plug should be the sa ...

  • Cisco Systems OL-16447-01 - page 92

    B-8 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix B Connec tor and Cable Specificatio ns Cables and Adapters Ta b l e B - 3 lists the pinouts for the console p ort, RJ-45-to-DB-25 female DTE adapter , and the console device. Note Th e RJ-45-to-DB-25 female DTE adapter i s n o t s u pp l ie d wi t h t h e ...

  • Cisco Systems OL-16447-01 - page 93

    C-1 Cisco ME 3400E Ethernet Acc ess Switch Hardware Installation Guide OL-16447-01 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This appendix pro vides a command-line interface (CLI) -based setup procedure for a standalone swi tch. Before con necting the swit ch to a power source, revie w the safe ty warnings in Chapter 2, “ ...

  • Cisco Systems OL-16447-01 - page 94

    C-2 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix C Config uring the Switch with the CLI-Based Se tup Program Entering the Initial Con figuration Information T o power on the switch, connect one end of the A C-p ower cord to the A C-po wer connector on the switch, an d c on n ec t the other end of the pow ...

  • Cisco Systems OL-16447-01 - page 95

    C-3 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Entering the Initial Configuration Information Step 3 Enter an ena ble secret pas sword, and pr ess Return . The password can be fro m 1 to 25 alphanumeric charac ters, can st art with a number , is c ...

  • Cisco Systems OL-16447-01 - page 96

    C-4 Cisco ME 3400E Ethernet Access Sw itch Hardware In stall ation Guide OL-16447-01 Appendix C Config uring the Switch with the CLI-Based Se tup Program Entering the Initial Con figuration Information ! interface FastEthernet1/0/2 interface FastEthernet1/0/3 ! ...<output abbreviated> end Step 10 These choices appear: [0] Go to the IOS comman ...

  • Cisco Systems OL-16447-01 - page 97

    IN-1 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 INDEX LEDs (continued) power-supply modul es (continued) SFP modules (continued) warnings (continued) Numerics 10/100/1000BASE-T SFP module 1-6 10/100/1000 p orts 1-11, B-3 10/100 po rts cable lengths 2-4 connecting to 2-22 described 1-5 1000BASE-BX10 SFP module 1-6 ...

  • Cisco Systems OL-16447-01 - page 98

    Index IN-2 Cisco ME 3400E Ethernet Access Sw itch Hardware Installation Guide OL-16447-01 straight-throu gh connecting to B-2 four twisted-pair pinou t, 1000BASE-T ports B-6 two twi sted-pair pi nout B-6 Cisco IOS command-line int erface 1-14 Cisco ME 3400E-24TS-M switch described 1-2 Cisco ME 3400EG-12CS-M switch descr ibed 1-3 Cisco ME 3400EG-2CS ...

  • Cisco Systems OL-16447-01 - page 99

    Index IN-3 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 F front panel clearance 2-4 description 1-2 to 1-11 LEDs 1-7 G ground conduc tor warning 2-3, 3-9 ground connection warning 2-3, 3-9 grounding architecture requirement 2-3 H HP OpenView 1-14 I installati on assigning the IP Add ress C-2 connecting t o a power s ...

  • Cisco Systems OL-16447-01 - page 100

    Index IN-4 Cisco ME 3400E Ethernet Access Sw itch Hardware Installation Guide OL-16447-01 See NEBS compliance noise, electrical 2-4 O overcurrent protection warning 3-12 overheating warning 2-4 P pinouts 10/100 po rts B-2 console port B-8 crossover cables four twisted-pair, 1000BASE-T p orts B-6 two twisted-pair 10/100 ports B-6 RJ-45-to-DB-25 term ...

  • Cisco Systems OL-16447-01 - page 101

    Index IN-5 Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide OL-16447-01 installing 2-21 removing 2-22 SFP modules 10/100/1000BASE-T 1-6 1000BASE-BX 1-6 1000BASE-BX10 1-6 1000BASE-LX/LH 1-6 1000BASE-SX 1-6 1000BASE-T 1-6 1000BASE-ZX 1-6 100BASE-BX 1-6 100BASE-EX 1-6 100BASE-FX 1-6 100BASE-LX 1-6 100BASE-ZX 1-6 connecting to 2-25 con ...

  • Cisco Systems OL-16447-01 - page 102

    Index IN-6 Cisco ME 3400E Ethernet Access Sw itch Hardware Installation Guide OL-16447-01 ground connection 2-3, 3-9 installati on 2-1, 3-12 jewelry removal 2-1 lightn ing activi ty 2-2, 3-5 multiple power supply 2-4 no user-serviceable parts 2-3 overheating 2-4 plug-socket combinat ion 2-3 power source 2-2 rack-mounting 2-2 restricted access area ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems OL-16447-01 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- OL-16447-01 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems OL-16447-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems OL-16447-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems OL-16447-01, service manual, brief instructions and user manuals Cisco Systems OL-16447-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems OL-16447-01.

Similar manuals

A complete manual for the device Cisco Systems OL-16447-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems OL-16447-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems OL-16447-01.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems OL-16447-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems OL-16447-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems OL-16447-01, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems OL-16447-01 - which should help us in our first steps of using Cisco Systems OL-16447-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems OL-16447-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems OL-16447-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems OL-16447-01?

Use the form below

If you did not solve your problem by using a manual Cisco Systems OL-16447-01, ask a question using the form below. If a user had a similar problem with Cisco Systems OL-16447-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)