English dropdown-ico

Manual Zoom 504 II

17 pages 0.61 mb
Download

Go to site of 17

Summary
  • Zoom 504 II - page 1

    Operation Manual Contents Introduction Thank you for selecting the ZOOM 504 II (hereafter simply called the " 504 II "). Please take the time to read this manual carefully so as to get the most out of the unit and to ensure optimum performance and reliability . Retain this manual, the warranty card and all other documentation for future r ...

  • Zoom 504 II - page 2

    SAFETY PRECAUTIONS Features Safety Precautions Features 2 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 3 About power • Since power consumption of this unit is fairly high, we recommend the use of an AC adapter whene ver possible. When powering the unit from a battery , use only an alkaline type. AC adapter operation • Be sure to use only an AC ada ...

  • Zoom 504 II - page 3

    4 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 5 1. Turn the 504 II over and open the cover of the battery compartment on the bottom. Press the latch to release it and then raise the cover. 2. Insert four fresh IEC R6 (size AA) batteries into the battery compartment. 3. Close the cover of the battery compartment. Close the cover of the battery compart ...

  • Zoom 504 II - page 4

    NOTE [+]/[-] keys [STORE] key Display [PLA Y/EDIT] selector [ ]/[ ] foot switches INPUT jack CONTROL IN jack OUTPUT jack DC 9V (AC adapter) jack Serves for connecting the output of the pickup (preamplifier) attached to an acoustic guitar , or the output of an electric guitar . When the 504 II is operated on batteries, the unit will be turned on whe ...

  • Zoom 504 II - page 5

    Power -on Set 504 II to play mode Immediately after turning on power to the 504 II, the unit will be in play mode also if the [PLA Y/EDIT] selector is set to a differ ent position. T o dir ectly switch the bank Switch patches T o adjust the master volume When using the 504 II on batteries, plug a shielded cable with mono phone plug into the INPUT j ...

  • Zoom 504 II - page 6

    NOTE NOTE Switch to bypass or mute T une the guitar Play the open string you want to tune, and watch the display. The right side of the display shows a symbol that indicates by how much the tuning is of f. When the unit is turned off and on again, the refer ence pitch setting is reset to 40 (440 Hz). Adjusting the r eference pitch of the tuner Pres ...

  • Zoom 504 II - page 7

    Select the ef fect parameter Change the parameter value Changing the parameter on/of f condition Holding down one of these k eys will continuously change the value. Additionally pressing the opposite key will cause a f aster change. Pressing both keys simultaneously skips values in lar ger steps. The parameter is turned off, and the indication &quo ...

  • Zoom 504 II - page 8

    NOTE NOTE NOTE Pr ess the STORE key in play mode or edit mode. Use the [ ]/[ ] foot switches to select the target location in which to stor e the patch. When the store/copy pr ocess is executed, the previous content of the store tar get is overwritten and cannot be restor ed if it was a user - created patch. Y ou should therefor e take care when se ...

  • Zoom 504 II - page 9

    Changing the "Patch call" method to pr e-select T o change the "Patch call" method to pre- select, you must turn the unit on while holding down the [ ] foot switch. Specifying the desir ed patch Y ou can also use the [+]/[-] keys to only switch the bank. The bank and patch number of the patch to be used next will be shown on the ...

  • Zoom 504 II - page 10

    Using the Feedback Suppressor ZOOM 504 II ACOUSTIC 19 Using the Feedback Suppressor Using the Feedback Suppressor 18 ZOOM 504 II ACOUSTIC The 504 II incorporates an F .B.SUPPRESSOR that serv es for reducing acoustic feedback by cutting a specific frequenc y range (feedback frequency). The F .B.SUPPRESSOR can be used in play mode or edit mode. Using ...

  • Zoom 504 II - page 11

    Using the Expression Pedal (FP01/FP02) Restoring Factory Defaults Using the Expression Pedal Restoring Factory Defaults 20 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 21 The 504 II is equipped with a CONTR OL IN jack designed for connection of the optional expression pedal FP01 or FP02. The pedal can be used as volume pedal or as a controller for v a ...

  • Zoom 504 II - page 12

    ZOOM 504 II ACOUSTIC 23 Effect Parameters Effect Parameters Linking Effects Linking Effects 22 ZOOM 504 II ACOUSTIC The patches of the 504 II consist of ten effect parameters (including tw o global parameters). By setting these parameters to the desired values, you can control the sound of a patch. It is also possible to switch individual parameter ...

  • Zoom 504 II - page 13

    24 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 25 Effect Parameters Effect Parameters Adjusts the overall v olume of the patch. A v alue of 25 corresponds to unity gain (input lev el and output lev el are equal). P A TCH LEVEL ACOUSTIC ELECTRIC FLA T The sound of the acoustic guitar is output with flat frequency response. THRU Simulator is not used a ...

  • Zoom 504 II - page 14

    26 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 27 Effect Parameters Effect Parameters Simulates the ambient character of sound picked up with a microphone. Higher values result in greater simulated distance between the guitar and the microphone. oF Sets the AIR parameter to OFF . AIR Allows choosing one out of eight differ ent effects that shape the ...

  • Zoom 504 II - page 15

    28 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 29 Effect Parameters Effect Parameters WAH This is an auto wah ef fect that works on single notes. Higher values result in stronger auto wah. PEDAL WAH Allows using the expression pedal (FP01/FP02) connected to the CONTR OL IN jack to manually adjust the W AH effect. When no pedal is used, the parameter ...

  • Zoom 504 II - page 16

    30 ZOOM 504 II ACOUSTIC ZOOM 504 II ACOUSTIC 31 Specifications/Patch List Effect Parameters/Specifications AUTO SCAN Automatically detects the frequency where feedback is occurring. MANUAL Allows the user to set the frequenc y to be suppressed. Higher values shift the attenuated band tow ards higher frequencies. oF Sets the F .B.SUPPRESSOR paramete ...

  • Zoom 504 II - page 17

    ZOOM CORPORA TION NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, T okyo 183-0022, Japan PHONE: +81-42-369-7116 F AX: +81-42-369-7115 W eb Site: http://www .zoom.co.jp Printed in Japan 504 II-5000 No power Refer to "1. Power -on" on page 8. Patch does not change Check whether patch call method is set to pre-select (see page 16). Low volume ...

Manufacturer Zoom Category Guitar

Documents that we receive from a manufacturer of a Zoom 504 II can be divided into several groups. They are, among others:
- Zoom technical drawings
- 504 II manuals
- Zoom product data sheets
- information booklets
- or energy labels Zoom 504 II
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zoom 504 II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zoom 504 II, service manual, brief instructions and user manuals Zoom 504 II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zoom 504 II.

Similar manuals

A complete manual for the device Zoom 504 II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zoom 504 II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zoom 504 II.

A complete Zoom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zoom 504 II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zoom 504 II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zoom 504 II, that we can find in the current document
3. Tips how to use the basic functions of the device Zoom 504 II - which should help us in our first steps of using Zoom 504 II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zoom 504 II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zoom 504 II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zoom 504 II?

Use the form below

If you did not solve your problem by using a manual Zoom 504 II, ask a question using the form below. If a user had a similar problem with Zoom 504 II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)