Manual Friedrich RT5

14 pages 0.16 mb
Download

Go to site of 14

Summary
  • Friedrich RT5 - page 1

    1 Heat /1 Cool Manual Ch angeover Bat ter y or Har dwire d RT5 Non-Programmable Electronic Thermostat Installation, Operation & Application Guide • For use with Friedrich PT AC units ONL Y • Backlit Display • Filter Check • Status Indicator Light • Relay Outputs (minimum voltage drop in thermostat) • T wo-Speed Fan ...

  • Friedrich RT5 - page 2

    T able of Contents Parts Diagram............................................................................................................................................... 1 Speci fi cations ...................................................................................................................... ......................... 2 Importa ...

  • Friedrich RT5 - page 3

    1 P arts Diagram ...

  • Friedrich RT5 - page 4

    2 Electrical rating: • 24 V AC (18-30 V AC) • DC Power: 3.0 VDC (2 “AA” batteries included) • 1 amp maximum per terminal • 3 amp maximum total load T emperature control range: 45°F to 90°F (7°C to 32°C) Accuracy: ± 1°F (± 0.5°C) System con fi gurations: 1-stage heat, 1-stage cool, heat pump, electric Timing: Anti-short Cycle: 5 ...

  • Friedrich RT5 - page 5

    3 ELECTRICAL SHOCK HAZARD – T urn off power at the main service panel by removing the fuse or switching the appropriate circuit breaker to the OFF position before removing the existing thermostat. 1. Turn of f power to the heating and cooling system by removing the fuse or switching the appropriate circuit breaker off. 2. Remove cover of old ther ...

  • Friedrich RT5 - page 6

    4 T o Install Thermostat (continued) 2. T o remove cover, insert and twist a coin or screwdriver in the slots on the sides of the thermostat. 3. Put thermostat base against the wall where you plan to mount it (Be sure wires will feed through the wire opening in the base of the thermostat). 4. Mark the placement of the mounting holes. 5. Set thermos ...

  • Friedrich RT5 - page 7

    5 HARDWIRED C R W Y B GL GH C RH RC W Y B O GL GH PRE-INST ALLED JUMPER T H E R M O S T A T F R I E D R I C H P T A C ...

  • Friedrich RT5 - page 8

    6 The con fi guration mode is used to set the RT5 to match your heating/cooling system. The RT5 functions with Friedrich PT AC models. Ensure that the thermostat is con fi gured for air conditioning with ELECTRIC HEA T ONL Y . T o con fi gure the R T5, perform the following steps: 1. Remove the cover of the thermostat by gently pulling on one of ...

  • Friedrich RT5 - page 9

    7 FIL TER DIFF ROOM SET REMOTE 3. Temperature Differential (1°F to 3°F) (0.5°C to 1.5°C) – Set the number of degrees between your “setpoint” temperature and your “turn on” temperature. Press the or button to set differential value. Press the SW6 button to advance to the next screen. Con fi guration Mode Settings (continued) FIL TER D ...

  • Friedrich RT5 - page 10

    8 FIL TER DIFF ROOM SET REMOTE 6. Room temperature offset (+9°F to -9°F) (+4.5°C to -4.5°C) Adjust to calibrate displayed room temperature to match actual room temperature. Note: When not set to 0, ROOM will display Press the or button to select. Press the SW6 button to advance to the next screen. FIL TER DIFF ROOM SET REMOTE 7. Maximum compres ...

  • Friedrich RT5 - page 11

    9 Once the thermostat is installed, it should be thoroughly tested. caution! : Do not energize the air conditioning system when the outdoor temperature is below 50 degrees. It can result in equipment damage or personal injury . Cool T est 1. Slide Mode switch to Cool mode. 2. Adjust set temperature so it is 5 degrees below room temperature. 3. Air ...

  • Friedrich RT5 - page 12

    10 Fan T est 1. Slide Fan switch to On position. 2. Indoor fan turns on. Auto On Auto On 3. Slide Fan switch to Auto position. 4. Indoor fan turns off. (T esting the thermostat continued from Page 9) The RT5 is a single-stage heat, single-stage cool thermostat. The RT5 can use 24 V AC or batteries as a power supply . The RT5 can be hardwired and ha ...

  • Friedrich RT5 - page 13

    11 Symptom Remedy No display For Hardwired Installation Check for 24 V AC at thermostat; display is blank when 24 V AC is not present For Battery Installation Display is blank when batteries are drained or installed incorrectly System fan does not come on properly V erify wiring is correct Check position of gas/electric switch Thermostat turns on a ...

  • Friedrich RT5 - page 14

    Friedr ich Air C onditioning Co. Post O f fice B ox 1 540 • S an Antonio, T ex as 782 95 - 1 54 0 42 00 N. Pan A m E xpre ss way • San Antonio, T ex as 782 1 8-52 1 2 (2 1 0) 35 7-4 4 0 0 • FA X (2 1 0) 3 57 - 4 4 80 w w w .fri edric h. com ...

Manufacturer Friedrich Category Thermostat

Documents that we receive from a manufacturer of a Friedrich RT5 can be divided into several groups. They are, among others:
- Friedrich technical drawings
- RT5 manuals
- Friedrich product data sheets
- information booklets
- or energy labels Friedrich RT5
All of them are important, but the most important information from the point of view of use of the device are in the user manual Friedrich RT5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Friedrich RT5, service manual, brief instructions and user manuals Friedrich RT5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Friedrich RT5.

Similar manuals

A complete manual for the device Friedrich RT5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Friedrich RT5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Friedrich RT5.

A complete Friedrich manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Friedrich RT5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Friedrich RT5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Friedrich RT5, that we can find in the current document
3. Tips how to use the basic functions of the device Friedrich RT5 - which should help us in our first steps of using Friedrich RT5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Friedrich RT5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Friedrich RT5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Friedrich RT5?

Use the form below

If you did not solve your problem by using a manual Friedrich RT5, ask a question using the form below. If a user had a similar problem with Friedrich RT5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)