Manual Vector SMATE200A

14 pages 0.44 mb
Download

Go to site of 14

Summary
  • Vector SMATE200A - page 1

    Vector Signal Generator ¸SMATE 200A Configuration Guide Version 01.00 April 2005 ...

  • Vector SMATE200A - page 2

    The variety of signal generation for production This document guides you step -by-step throug h th e configuration proc ed ure for the Vector Signal Generato r R&S SMATE200A. Each step indicates wheth e r an option is mandatory or optio n al and also provides the follo wing information: Option Name of the option Description Description of the o ...

  • Vector SMATE200A - page 3

    Option overview RF path B RF path A Base Unit 100 kHz to 6 GH z 1st RF Path SMATE-B106 1401.1200.02 Vector Signal Generator SMATE200A 1400.7005.02 Baseband Options marked with 2x (first in baseband path can be in- stalled twice A, second in baseband path B) High Power Output 1st RF Path SMATE-B31 1401.1800.02 FM/PhiM Modulator and Low Phase Noise S ...

  • Vector SMATE200A - page 4

    Single-path instrument Applies if t he instrument i s equipped with o ne RF path and no more than one baseband pa th. Step c Configure RF path MANDATORY Choose frequency range (only one choice possible) MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz SMATE200A SMATEB106 HW Factory-install ed SMA ...

  • Vector SMATE200A - page 5

    Choose digital modulation systems with R&S WinIQSIM ™ 1 OPTIONAL Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE -B 1 0 o r B11 - SW Wit h Wi n IQS I M ™ SMATE-K12 Dig. Std. cdma20 00 SMATE-B10 or B11 - SW Wit h Wi n IQS I M ™ SMATE-K13 Dig. Std. 3GPP TD D SMATE-B10 or B11 - SW Wit h Wi n I ...

  • Vector SMATE200A - page 6

    Two-path instrument Applies if t he instrument is equipped with up to two RF paths and up to t wo baseband paths. Step c Configure RF path A MANDATORY Choose frequency range (only one choice possible) MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz SMATE200A SMATEB106 HW Factory-install ed SMATE ...

  • Vector SMATE200A - page 7

    Step e Configure baseband path A OPTIONAL Choose baseband source MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATEB10x - HW Factory-install ed. Requires SM ATE-B10, SM ATE- B11 or SMATE-K62. SMATE-B10 Baseband Generator with ARB and Digital Modulation SMATE-B13 (in baseband pat h A) SMAT ...

  • Vector SMATE200A - page 8

    Choose noise OPTIONAL Option Description Requires Not compatible with HW or SW Remarks SMATE-K62 Additive White Gaussian Noise ( AWGN ) SMATE-B13 - SW Step f Configure baseband path B OPTIONAL Choose baseband source MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATE-B13 (in baseband pat h ...

  • Vector SMATE200A - page 9

    Choose digital modulation systems with R&S WinIQSIM ™ 1 OPTIONAL Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE -B 1 0 o r B11 - SW Wit h Wi n IQS I M ™ SMATE-K12 Dig. Std. CDMA20 00 SMATE-B10 or B11 - SW Wit h Wi n IQS I M ™ SMATE-K13 Dig. Std. 3GPP TD D SMATE-B10 or B11 - SW Wit h Wi n I ...

  • Vector SMATE200A - page 10

    Configuration Examples The modular design of the R&S SMATE200A allows the instrument to be equipped with up to two paths. This allo ws a multitud e of a pplications to be performed f or which several signal generato rs wer e previ ousl y re quired. One baseband generator and one RF path Instrument configuration Option Installed Description SMAT ...

  • Vector SMATE200A - page 11

    One baseband generator and two RF paths Instrument configuration Option Installed Description SMATE200A 1x Base unit SMATEB10x 1x Frequency option 1st RF path SMATEB20x 1x Frequency option 2n d RF path SMATE-B13 1x Baseband mai n module SMATE-B10 1x Baseband generat or Application example ¾ Generation of a modulated si gnal on path A and a CW inte ...

  • Vector SMATE200A - page 12

    Ordering information Vector Signal Generator 1 R&S SMATE200A 1400.7005.02 including power cable, Quick S tart Guide and CD-ROM (with operating and service manual) Options RF path A 100 kHz to 3 GHz R&S SMATEB103 1401.1000.02 100 kHz to 6 GHz R&S SMATEB106 1401.1200.02 Low Phase Noise and analog modulation FM / PhiM R&S SMATE-B22 140 ...

  • Vector SMATE200A - page 13

    Digital modulation systems using R&S WinIQSIM ™ 2 Digital Standard IS-95 (with R&S WinI QSIM ™ ) R&S SMATE-K11 1404.5907.02 Digital Standard CDMA2000 (with R&S WinIQSIM ™ ) R&S SMATE-K12 1404.6003.02 Digital Standard 3GPP TDD (with R&S WinIQSIM ™ ) R&S SMATE- K13 1404.6090.02 Digital Standard TD-SCDMA (with R& ...

  • Vector SMATE200A - page 14

    R&S ® is a regist ered trademark of Rohde & Schwa rz GmbH & Co. KG · Trad e names are tra demarks of the owners R&S ® SMAT E200A ⋅ Version 01.0 0 ⋅ April 2005 ⋅ Data without tolerance limits is not bind ing ⋅ Subject to change www.ro hd e-sc h wa r z. c o m Europe: Tel. +49 1805 12 4242 , e-mail: custome rsupport@rohde-sc ...

Manufacturer Vector Category Portable Generator

Documents that we receive from a manufacturer of a Vector SMATE200A can be divided into several groups. They are, among others:
- Vector technical drawings
- SMATE200A manuals
- Vector product data sheets
- information booklets
- or energy labels Vector SMATE200A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vector SMATE200A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vector SMATE200A, service manual, brief instructions and user manuals Vector SMATE200A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vector SMATE200A.

Similar manuals

A complete manual for the device Vector SMATE200A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vector SMATE200A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vector SMATE200A.

A complete Vector manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vector SMATE200A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vector SMATE200A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vector SMATE200A, that we can find in the current document
3. Tips how to use the basic functions of the device Vector SMATE200A - which should help us in our first steps of using Vector SMATE200A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vector SMATE200A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vector SMATE200A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vector SMATE200A?

Use the form below

If you did not solve your problem by using a manual Vector SMATE200A, ask a question using the form below. If a user had a similar problem with Vector SMATE200A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)