Manual Apple Sirius IIGS

62 pages 2.59 mb
Download

Go to site of 62

Summary
  • Apple Sirius IIGS - page 1

    ...

  • Apple Sirius IIGS - page 2

    Table Of Contents INTRODUCTION - GETTING STARTED V About the Vulcan v What’s Included with the Vulcan v The Vulcan’s Fan vi The Power Supply vi CHAPTER ONE- IIGS INSTALLATION 1 Installation Procedure 1 What Now? 7 CHAPTER Two - // E AND ][ PLUS INSTALLATION 9 Installation Procedure 9 What Now? 15 CHAPTER THREE - THE PARTITION MANAGER 17 First.. ...

  • Apple Sirius IIGS - page 3

    Formatting 26 Print 26 Quit 27 Final Check 27 Quitting 27 CHAPTER FOUR - PRODOS 8, DOS 3.3, PASCAL, AND CP/M 29 ProDOS 8 29 DOS 3.3 29 Recognizing Vulcan under DOS 3.3 29 Booting from a Vulcan DOS 3.3 Partition 30 Patched DOS 3.3 Notes 30 Volume Sizes 30 Copying Files to the DOS 3.3 Partition 30 Other DOS 3.3 Goodies 34 CP/M 34 Pascal 34 CHAPTER FI ...

  • Apple Sirius IIGS - page 4

    APPENDICES 43 A: Trouble Shooting 45 If you can’t boot 45 ProDOS Can’t Find All Four Vulcan Partitions 45 Eight Total Drive Devices 45 Two Drive Devices per Slot 45 B: Vulcan Speed Under GS/OS (IIGS Only) 47 C: The Vulcan Classic Desk Accessory (IIGS Only) 48 Accessing the Desk Accessory 48 Set Boot Partition 49 Write Protect Partition 49 Park ...

  • Apple Sirius IIGS - page 5

    Æ iv Vulcan ...

  • Apple Sirius IIGS - page 6

    INTRODUCTION Getting Started About the Vulcan What's Included with the Vulcan On the Vulcan The Vulcan comes preformatted and set into ProDOS partitions. Computer Size #of Preset Contents Partitions IIGS 20Meg 1 GS/OS, Utils IIGS 40Meg 2 1) GS/OS, Utils 2) Empty IIGS l00Meg 4 1) GS/OS, Utils 2) Empty //e,][+ 20Meg 2 1) ProDOS 8, Utils 2) GS/OS ...

  • Apple Sirius IIGS - page 7

    Also the ProDOS 8 version provided on the Vulcan and the floppy disks has been patched to allow ProDOS 8 to use four ProDOS partitions from the Vulcan instead of only two. The Separate Disks The 3.5” disk is a backup of the files necessary to boot GS/OS. It also contains the Vulcan’s utilities such as the native mode driver, partition manager, ...

  • Apple Sirius IIGS - page 8

    CHAPTER ONE IIGS Installation Installation Procedure You’ll need no special tools to install the Vulcan. Simply follow the instructions below. 1) Open Computer Press in the two latches at the rear of the case with your forefingers while using your thumbs to push the lid up and towards you. (See picture following.) Remove the IIGS cover 2) Remove ...

  • Apple Sirius IIGS - page 9

    Unplug Internal Cord iv) Gently pull back on tab at bottom front of power supply. A small flatblade screwdriver may keep you from breaking a nail. Pull Back Tab v) Lift out power supply. You may want to store the power supply in the Vulcan’s box. 3) Remove Vulcan from Packing. 4) Check Voltage Setting The switch setting on back of the Vulcan must ...

  • Apple Sirius IIGS - page 10

    5) Insert Vulcan i) Insert bock end first. Align the three holes in the back of the Vulcan with the three prongs in the back of the computer. ii) Snap down Into front tab. Push down on the front of the Vulcan until the plastic tab on the computer case snaps into the hole at the bottom front of the Vulcan. You should hear the tab snap into place. Sn ...

  • Apple Sirius IIGS - page 11

    7) Set Switches According to Slot The Controller Card will work from any slot. However, there are a few conditions of which you need to be aware. Do not install the card into the Memory Expansion slot. We recommend installing the controller card into slot 6 or 7. Check the switches on the card. The switch block is the red rectangular box toward the ...

  • Apple Sirius IIGS - page 12

    1) Locate the switch block on the controller card. 2) If a piece of tape is covering the switches, remove it. 3) Set the switches in the position shown below. Switch Setting 1 OPEN 2 CLOSED 3 CLOSED 4 CLOSED Switches Set for Pseudo-SlottIng 8) Insert Card Into Slot Align the gold “fingers” of the controller cards edge connector with the slot; t ...

  • Apple Sirius IIGS - page 13

    10) ReInstall Any Cards Removed Replace any cards you have removed for the installation following those cards’ installation instructions. • WARNING! IF YOU HAVE A CARD IN SLOT 1 , use the insulator card (2” x 6”) included with the Vulcan package. Applied Engineering will not be responsible for damage to any other products so be careful when ...

  • Apple Sirius IIGS - page 14

    What Now? Using GS/OS You may want to use only the GS/OS operating system on the Vulcan. If that’s the case, you’re already set to go. The Vulcan is formatted with GS/OS installed in the first partition. Dividing the Partitions If you’d like to set up the hard drive so that it appears to be several separate disks, refer to the next chapter. L ...

  • Apple Sirius IIGS - page 15

    Æ Vulcan 8 Vulcan ...

  • Apple Sirius IIGS - page 16

    CHAPTER Two //e and ][ Plus Installation Installation Procedure You’ll need Phillips screwdriver to install the Vulcan. When you have one, follow the instructions below. 1) Open Computer Pull up on the two tabs at the rear of the case lifting the lid up and towards you. (See picture following.) Remove the //e or ][ Plus cover 2) Remove Cards If y ...

  • Apple Sirius IIGS - page 17

    Squeeze the left and right side of the plug to release, then pull up. Unplug Internal Cord iii) Remove screws. Turn the computer on its left side. On the bottom of the computer you will find four screws in a rectangular pattern the size of the power supply. While firmly holding onto the power supply, remove the four screws. When all four are remove ...

  • Apple Sirius IIGS - page 18

    Attach Riser Plates (][ Plus Only) 7) Insert Vulcan With the computer still on its side, turn the Vulcan at an angle and insert it into the opening left by the old supply. • If Plus Note: Some speakers will be in the way, others will not. If you need to move the speaker, pry it up (it is glued not screwed) and use the included adhesive strip to r ...

  • Apple Sirius IIGS - page 19

    • ][ Plus Note: If the holes don’t align, try turning one or both of the bottom plates around. 9) Plug Internal Power Cord Into Motherboard. Return the computer to its normal position. The Vulcan’s internal power cord plugs into the motherboard in the same place as the old power supply’s cord. The connector’s push tabs should be toward th ...

  • Apple Sirius IIGS - page 20

    Switch 3, ][+ Boot Enable Leaving this switch open allows a II+ or an unenhanced //e to boot directly from the hard disk. The Vulcan still must be the first drive device encountered (usually slot 7). If the hard disk is not to be the boot device in these systems, this switch should be dosed. In a / /e retrofit or an enhanced / /e, this switch shoul ...

  • Apple Sirius IIGS - page 21

    If you want the card to appear to be in the slot in which it is installed, set switch 4 to Open. Switch 2 can be Open or Closed. 11)Insert Card Into Slot Align the gold “fingers” of the controller cards edge connector with the slot; then use the heel of one hand to push the card down into the slot and seat it firmly. Insert Controller Card into ...

  • Apple Sirius IIGS - page 22

    14) Close Computer Replace the lid by sliding the front of the lid in first, lowering the back edge into place and then pushing gently and firmly on the back corners of the lid until it pops into place. 15) Plug In External Power Cord This is the same cord as your original power supply used. Connect it to the back of the Vulcan and then plug it int ...

  • Apple Sirius IIGS - page 23

    Æ 16 Vulcan Vulcan ...

  • Apple Sirius IIGS - page 24

    CHAPTER THREE The Partition Manager First... The first thing you should know about the Partition Manager (PM) is that it is a formatting utility. Modifications to the size of a partition and switching operating system change the basic structure of the disk and will destroy any data currently within the partitions you are resizing. So, before using ...

  • Apple Sirius IIGS - page 25

    From Basic From BASIC, set your current prefix to the VULCAN disk and enter -PART.MANAGER at the BASIC prompt. From the Finder (GS and lIe retrofit Only) 1) With your 3.5” drive set as the startup device, insert your Vulcan 3.5” disk into it and boot your computer. 2) Double-dick the disk icon to open its window. 3) Double-click the icon PART M ...

  • Apple Sirius IIGS - page 26

    While in MODIFY mode, the Partition Manager is set up like a spread sheet. Use the arrow keys to move from cell to cell. To move the cursor Use up “I” or up arrow down “M” or down arrow left “J” or left arrow right “K” or right arrow LockIng/Unlocking Partitions Locking a partition protects that partition from being written to, refo ...

  • Apple Sirius IIGS - page 27

    Name the PartitIon To name a partition, while in MODIFY mode: 1) Move the cursor to the NAME column of the partition you want to name. 2) Press <return>. 3) Type in the name for the partition. (Refer to Name Rules above for acceptable names.) 4) Press <return> Canceling Rename While in the ENTER NAME mode, if you want to leave the name ...

  • Apple Sirius IIGS - page 28

    4) DOS 3.3 allows a maximum partition size of 32 Meg made up of a number of either 140K or 400K volumes (set in the FORMAT option). 5) Pascal allows a maximum partition size of 16 Meg (16,383.5K -- $7FFF). 6) CP/M allows a maximum partition size of 8 Meg (8192.0K -- $4000). Sizing the Partition * IMPORTANT: If you currently have files within the pa ...

  • Apple Sirius IIGS - page 29

    To Use increase size by 32K “1” or up arrow decrease size by 32K “M” or down arrow increase size by 0.5K “K” or right arrow decrease size by 0.5K "J" or left arrow iv) Press <return> The sizes are dependent upon the total available space. All of the hard disk memory must be allocated to one partition or another. When you ...

  • Apple Sirius IIGS - page 30

    Because ProDOS can recognize only 8 online volumes, you may want to have less than four drives active depending on your system’s setup. For example: if you have two 5.25” drives, two 3.5” drives and a RAM disk, you would only want three Vulcan partitions active. If you have four turned on, one drive unit will not show up properly. Another exa ...

  • Apple Sirius IIGS - page 31

    2) Move the cursor to the SYSTEM column of the partition you want to resize. 3) Press <return>. 4) Use the arrow keys or I, J, K, M keys to toggle through the system options until you reach the desired system. 5) Press <return>. 6) Changing systems automatically turns off that partition so turn on the partition if you want it active. Af ...

  • Apple Sirius IIGS - page 32

    Set Boot Partition To set the boot partition, while in MODIFY mode: 1) If there is not already an asterisk in the boot column of the partition you want to boot from, move the cursor to that column. 2) Press <return>. The asterisk will be removed from its current position and will appear in that column you currently have selected. Leaving MODI ...

  • Apple Sirius IIGS - page 33

    Formatting * Note: Formatting will completely erase everything that may still reside on the partition being formatted. You should have all important files backed up by this time. Once you have your partitions set to the desired size and operating system, you’ll want to format the partitions for their particular system so they can be written to an ...

  • Apple Sirius IIGS - page 34

    Quit When you're ready to leave the Partition Manager, use the QUIT option. Final Check Before you leave the PM, check your settings to make sure they are as you want them. ◊ Have you formatted the resized and new partitions? ◊ Are the partitions you want active turned on? ◊ Do you have the boot flag set to the proper partition? Quitting ...

  • Apple Sirius IIGS - page 35

    Æ Vulcan 28 Vulcon ...

  • Apple Sirius IIGS - page 36

    CHAPTER FOUR ProDOS 8, DOS 3.3, Pascal, and CP/M * Note: You must be within a partition’s operating system before you can copy files to it. For example, you can’t copy to the DOS 3.3 partitions while in ProDOS. Only the partitions that are currently ON and contain the system currently booted will be recognized. ProDOS 8 The ProDOS 8 we’ve inc ...

  • Apple Sirius IIGS - page 37

    Booting from a Vulcan DOS 3.3 Partition To boot from a DOS 3.3 partitions, follow these steps: 1) Follow the steps in the previous section. • Note: The first volume must be 140K; you cannot boot from a 400K volume. 2) Initialize Volume 1 to make it a bootable device. The procedure is the same as initializing a standard DOS 3.3 disk with the addit ...

  • Apple Sirius IIGS - page 38

    Copying Files with FID RD is a binary program which will copy DOS 3.3 files and applications from one disk to another. Apple’s original version does not recognize hard drives as an option. We’ve modified the version included on the Vulcan’s DOS 3.3 disk to recognize the Vulcan’s DOS 3.3 partitions and allow you to copy files to them. To exe ...

  • Apple Sirius IIGS - page 39

    AE.FID (or=) Specifies filename of first file to copy. The equal sign (=) is a wild card character meaning “copy all”. Repeat the above steps for each file you want copied or, if you’ve pressed “=“, you won’t need to repeat the steps for individual file copying. S (or any key) Returns you to the AE FID menu. 9 Quits and returns you to t ...

  • Apple Sirius IIGS - page 40

    The first time you select this option in a session, you’ll be asked to specify the slot, drive, and volume. The subsequent times, you’ll be returned to the volume last chosen. To view a different volume, use <7> RESET SLOT AND DRIVE before pressing <3> again. <4> UNLOCK FILES To unlock individual files, use this command. The f ...

  • Apple Sirius IIGS - page 41

    Other DOS 3.3 Goodies We’ve included some other helpful utilities on the DOS 3.3 disk. Run Volume 2 Hello - Runs Hello program on V2 of the same partition. Park Heads - Moves hard drive’s heads to safe place. Use just before shut down. Catalog All Volumes - complete listing of all DOS 3.3 volumes in active partition. (Press any key for next vol ...

  • Apple Sirius IIGS - page 42

    CHAPTER FIVE Backing Up the Vulcan Introduction Because Vulcan’s partitions act as separate disks, you'll need to backup the partitions separately. We’ve included Apple Computer’s Backup IL program on the ProDOS partition of the Vulcan for backing up the ProDOS partitions. To back up the DOS 3.3, Pascal, and CP/M partitions, use an appro ...

  • Apple Sirius IIGS - page 43

    Suggested Backup Schedule If you use your computer constantly, we recommend that you use make a backup of the entire hard disk on a weekly basis and back up individual modified files daily. If you don’t use your computer that much, a bimonthly or even monthly full backup may be all you need. But always back up any important documents after creati ...

  • Apple Sirius IIGS - page 44

    * Note: Remember that it’s much quicker to preformat the disks instead of letting Backup II do it. Refer to the chart at the beginning of this chapter to get an idea of how many disks to preformat. 1) Run Backup II. 2) Label one of the blank formatted disks /BU1 along with the date and insert it into the drive to which you’ll be backing up. 3) ...

  • Apple Sirius IIGS - page 45

    10) Select where to output the file list; ◊ Press <return> for screen only ◊ Press P-<return> for printer and screen if you have a printer connected. Backup II will then begin the backup procedure. The program will tell you which disk it is currently backing up as well as how many total disks it needs. As it finishes filling each di ...

  • Apple Sirius IIGS - page 46

    B — BACKUP FILES R — RESTORE FILES Q - QUIT PLEASE SELECT AN OPTION 4) Press “M” to select BACKUP MODIFIED FILES. M — BACKUP MODIFIED FILES P - BACKUP BY PATHNAME SELECT AN OPTION OR <ESC>: 5) At the BACKUP FROM prompt, type in a slash followed by the name of your Vulcan partition. Ex: BACKUP FROM -- (/VULCAN1 6) Press <return> ...

  • Apple Sirius IIGS - page 47

    1) Run Backup II. 2) Insert the disk from which you want a listing into the proper floppy drive. 3) From Backup H’s main menu, press the R key on your keyboard. This selects the RESTORE FILES option. B — BACKUP FILES R — RESTORE FILES Q — QUIT PLEASE SELECT AN OPTION 4) Press L to select LIST FILES. V - RESTORE VOLUME P - RESTORE BY PATHNAM ...

  • Apple Sirius IIGS - page 48

    • Note: If you don’t have a list of what files are on what disks, you can list the contents of each disk following the instructions under the Listing Files section above. 3) From Backup II’s main menu, press the R key on your keyboard. This selects the RESTORE VOLUME option. B - BACKUP FILES R - RESTORE FILES Q - QUIT PLEASE SELECT AN OPTION ...

  • Apple Sirius IIGS - page 49

    10) At the TO THE DIRECTORY — prompt, type in the name of the directory (and the pathname if so desired) to which you’ll be restoring the file or files, ex: TO THE DIRECTORY —— (/VULCAN1 11) Select where to output the restored file list; ◊ Press <return> to send the list to the screen only ◊ Press P-<return> to send the list ...

  • Apple Sirius IIGS - page 50

    APPENDICES The following appendices are included for further reference and reading enjoyment: A - - Trouble Shooting B - - Vulcan Speed Under GS/OS C - - Hardware D - - A Brief Pro DOS Tutorial E - - Getting Help Appendices 43 ...

  • Apple Sirius IIGS - page 51

    Æ Vulcan 44 Vulcan ...

  • Apple Sirius IIGS - page 52

    APPENDIX A Trouble Shooting If you can't boot ◊ Check the switch settings (refer to chapters 1 and 2). ◊ Check which drive is set to boot under the Partition Manager. ◊ Is the boot partition turned ON under the Partition Manager? ◊ Does the partition set to boot contain the necessary boot files? ◊ Turn off the computer then see if th ...

  • Apple Sirius IIGS - page 53

    APPENDIX B Vulcan Speed Under GS/OS (IIGS Only) We’ve written a special driver to speed up the Vulcan’s access time under GS/OS. If you’re booting GS/OS from the Vulcan this driver is automatically installed. However, if you’re booting from a RAM disk, ROM disk or 3.5” drive, you’ll need to copy the driver to the boot disk. To copy the ...

  • Apple Sirius IIGS - page 54

    A PPENDIX C The Vulcan Classic Desk Accessory (IIGS Only) Included in the System folder on the first Vulcan partition is a Classic Desk Accessory that allows you to set the boot partition, write protect individual partitions, or park the Vulcan’s heads. Accessing the Desk Accessory Access the Classic Desk Accessories menu by holding down the OA a ...

  • Apple Sirius IIGS - page 55

    Again, use the up and down arrow keys to select the option. The different options and their functions are described below. Set Boot Partition Choose this option to select from which partition you want to boot. A check mark appears next to the partition currently set to boot. To change the boot partition, follow these steps: 1) Use the up or down ar ...

  • Apple Sirius IIGS - page 56

    • Note: If you press <esc> after selecting the Park Heads option, you’ll be returned to the Vulcan main menu and the heads will no longer be parked. About Vulcan... About Vulcan tells you the version number of the Vulcan Desk Accessory, tells you who created the Vulcan, and gives you the numbers for Sales and Tech Support. Quit Selecting ...

  • Apple Sirius IIGS - page 57

    APPENDIX D Hardware Switches The controller card has a block of four switches located in the lower right hand corner. What They Do Switch 1, Interrupt Enable - This switch must be closed in order for any interrupts generated by the Hard Drive to pass through to the Apple. (Interrupts are not used at this time.) Switch 2, PS Enable - When pseudo-slo ...

  • Apple Sirius IIGS - page 58

    Remote Light Jack In addition to the on-board LED, there is a two pin connector for a remote drive activity indicator LED. Applied Engineering offers an LED extension option. Call Æ Sales to order at (214) 241-6060. If you’re so inclined, you can make an extension light to run from the connector and attach it under the front panel next to the gr ...

  • Apple Sirius IIGS - page 59

    APPENDIX E A Brief ProDOS Tutorial This is a brief explanation of the Pro D isk O perating S ystem, ProDOS , for those who are completely new to it. All of this information and more is included in your Apple Owner’s Guide, but we have provided it here for your convenience. Operating System ProDOS is one of several operating systems for the Apple. ...

  • Apple Sirius IIGS - page 60

    2) Put files within subdirectories like putting documents in folders. 3) Put subdirectories within subdirectories like putting folders within folders. Pathname The name of the directory combined with the names of one or more subdirectories is called a pathname. Volume names and subdirectory names are preceded by a slash, “1”. (Note that some ap ...

  • Apple Sirius IIGS - page 61

    Additional Resources The following books are available through most book stores: Apple II Owner’s Manual (Apple Computer, Inc.) Supplied with your Apple Computer. Take the time to read it. Basic Programming with ProDOS (Addison-Wesley Publishing) Gives a detailed explanation of how to use ProDOS from AppleSoft Basic. Beneath Apple ProDOS (Quality ...

  • Apple Sirius IIGS - page 62

    APPENDIX F Getting Help If you have a technical question relating to the Vulcan Hard Drive or any other Applied Engineering product that is not covered in the manual please contact the dealer from whom you purchased the product. If you are experiencing difficulties with one particular program, contact the program’s author or publisher. In the eve ...

Manufacturer Apple Category Computer Hardware

Documents that we receive from a manufacturer of a Apple Sirius IIGS can be divided into several groups. They are, among others:
- Apple technical drawings
- Sirius IIGS manuals
- Apple product data sheets
- information booklets
- or energy labels Apple Sirius IIGS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Apple Sirius IIGS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Apple Sirius IIGS, service manual, brief instructions and user manuals Apple Sirius IIGS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Apple Sirius IIGS.

Similar manuals

A complete manual for the device Apple Sirius IIGS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Apple Sirius IIGS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Apple Sirius IIGS.

A complete Apple manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Apple Sirius IIGS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Apple Sirius IIGS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Apple Sirius IIGS, that we can find in the current document
3. Tips how to use the basic functions of the device Apple Sirius IIGS - which should help us in our first steps of using Apple Sirius IIGS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Apple Sirius IIGS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Apple Sirius IIGS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Apple Sirius IIGS?

Use the form below

If you did not solve your problem by using a manual Apple Sirius IIGS, ask a question using the form below. If a user had a similar problem with Apple Sirius IIGS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)