Manual KitchenAid KCDP 9010/I

16 pages Not applicable
Download

Go to site of 16

Summary
  • KitchenAid KCDP 9010/I - page 1

    KCDP 9010/I Instructions for use ...

  • KitchenAid KCDP 9010/I - page 2

    ...

  • KitchenAid KCDP 9010/I - page 3

    W arnings 4 Safeguarding the environment 5 Instructions for installation and use 6 Extraction Modes 6 Installation 7 Hood description 11 Functioning 11 Maintenance 12 After-Sales Service 14 ...

  • KitchenAid KCDP 9010/I - page 4

    • This appliance should not be used by children or people with limited physical or mental abilities and with no experience or knowledge of its use, unless they are supervised by someone in charge of their safety or who has taught them how to use the appliance. • Children should not play with the appliance. 1. Do not connect the appliance to the ...

  • KitchenAid KCDP 9010/I - page 5

    5 1. P acking The packaging material is entirely recyclable and marked with the recycling symbol . Follow local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous. 2. Product This appliance is marked according to the European Directive 2002/96/E ...

  • KitchenAid KCDP 9010/I - page 6

    This is an excessively heavy product and the movement and installation of the hood should be done by at least two or more people. Follow the instructions in this manual carefully . All responsibility is denied for problems, damage or fire to the appliance resulting in failure to comply with the instructions in this manual. Instructions for installa ...

  • KitchenAid KCDP 9010/I - page 7

    ceiling wall side cabinet V enting exhaust pipe passages and side cabinet min. width of hood centre line Cooking surface * Recirculation mode only all measurements in mm The hood comes with plugs suitable for most walls/ceilings. Y ou should however consult a qualified technician to make sure the installation is suitable for your kind of wall/ceili ...

  • KitchenAid KCDP 9010/I - page 8

    centre line support bracket hooks bottom fastener locations Ø 8 mm REAR VIEW hooks bottom screw hole (inside the canopy) FRONT VIEW Fig. 4 • Place the lower support bracket on the perforation layout aligning it with the sketched rectangle. Mark the two external holes, then drill the holes. Remove the perforation layout and insert 2 wall plugs an ...

  • KitchenAid KCDP 9010/I - page 9

    • The hood has two identical brackets for attaching the chimney . Attach the first bracket ( G – the side with fixing holes facing upwards – see Fig. 6 ) to the wall next to the ceiling, using the support bracket as a template (the small slots cut in the bracket should coincide with the centre lines previously traced on the wall), mark 2 hole ...

  • KitchenAid KCDP 9010/I - page 10

    10 • Hook the hood onto the lower bracket. • Fit the hood securely to the wall with screws • Connect the venting pipe (V enting pipe and straps are not provided and must be purchased seperately) to the connection ring found above the motor suction unit. The other end of the pipe should be attached to venting pipe leading to the outside if you ...

  • KitchenAid KCDP 9010/I - page 11

    T urn to maximum speed when there is a lot of steam in the kitchen. W e would advise you to turn the extraction on 5 minutes before starting to cook and leave it running after you have finished cooking for about another 15 minutes. 1. ON/OFF light button: press once for a dimmed light, twice for a full light. P ress again to turn off 2. Motor ON/OF ...

  • KitchenAid KCDP 9010/I - page 12

    12 Always disconnect the power supply before carrying out any kind of maintenance work. Cleaning The hood should be cleaned regularly both inside and out (at least as often as you carry out maintenance on the grease filters). Use a damp cloth with mild cleaning products. Avoid using harsh products. DO NOT USE ALCOHOL! W arning: Failure to follow th ...

  • KitchenAid KCDP 9010/I - page 13

    13 Carbon filter (only in recirculation mode) Fig. 12 The Carbon filter absorbs any unpleasant smells produced when cooking. The carbon filter can be washed every two months in hot water with suitable cleaning fluids, or in the dishwasher at 65°C (when washing in the dishwasher , do a full wash without any plates inside). Shake off any excess wate ...

  • KitchenAid KCDP 9010/I - page 14

    Before calling Customer Care Centre: 1. See if you can solve the problem yourself with the help of the “T roubleshooting guide”. 2. Switch off the hood for a few minutes and re- start it to see if the problem has cleared itself . 3. If the malfunction persists, call the Customer Care Centre Service. Specify: • the nature of the problem, • t ...

  • KitchenAid KCDP 9010/I - page 15

    15 W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover ( A ) and fuse ( B ). 2. Fit replacement 13A fuse into fuse cover . 3. Ref ...

  • KitchenAid KCDP 9010/I - page 16

    5019 718 02007 Printed in Italy n 05/07 GB ...

Manufacturer KitchenAid Category Exhaust hood

Documents that we receive from a manufacturer of a KitchenAid KCDP 9010/I can be divided into several groups. They are, among others:
- KitchenAid technical drawings
- KCDP 9010/I manuals
- KitchenAid product data sheets
- information booklets
- or energy labels KitchenAid KCDP 9010/I
All of them are important, but the most important information from the point of view of use of the device are in the user manual KitchenAid KCDP 9010/I.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals KitchenAid KCDP 9010/I, service manual, brief instructions and user manuals KitchenAid KCDP 9010/I. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product KitchenAid KCDP 9010/I.

A complete manual for the device KitchenAid KCDP 9010/I, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use KitchenAid KCDP 9010/I by users. Manuals are usually written by a technical writer, but in a language understandable to all users of KitchenAid KCDP 9010/I.

A complete KitchenAid manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual KitchenAid KCDP 9010/I - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the KitchenAid KCDP 9010/I, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the KitchenAid KCDP 9010/I, that we can find in the current document
3. Tips how to use the basic functions of the device KitchenAid KCDP 9010/I - which should help us in our first steps of using KitchenAid KCDP 9010/I
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with KitchenAid KCDP 9010/I
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of KitchenAid KCDP 9010/I in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning KitchenAid KCDP 9010/I?

Use the form below

If you did not solve your problem by using a manual KitchenAid KCDP 9010/I, ask a question using the form below. If a user had a similar problem with KitchenAid KCDP 9010/I it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)