Manual Graco Inc. 205626

18 pages 0.33 mb
Download

Go to site of 18

Summary
  • Graco Inc. 205626 - page 1

    Instructions – Parts List GRACO INC.ąP .O. BOX 1441ąMINNEAPOLIS, MNą55440-1441 Copyright 1996, Graco Inc. is registered to I.S. EN ISO 9001 10:1 Fire–Ball r 425 Pump For pumping non–corrosive and non–abrasive oils and lubricants only . 180 psi (12.4 bar) Maximum Incoming Air Pressure 1800 psi (124 bar) Maximum Fluid Working Pressure Mode ...

  • Graco Inc. 205626 - page 2

    2 308655J T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T roubleshooting 8 . . . . . . . . . . . . . . . . . . . . ...

  • Graco Inc. 205626 - page 3

    308655J 3 HAZARDOUS FLUIDS Improper handling of hazardous fluids or inhaling toxic fumes can cause extremely serious injury , even death, due to splashing in the eyes, ingestion, or bodily contamination. D Know the specific hazards of the fluid you are using. D Store hazardous fluid in an approved container . Dispose of hazardous fluid according to ...

  • Graco Inc. 205626 - page 4

    4 308655J Installation The typical installation shown in Fig.1 is only a guide to help you select and install a pump; it is not an actual system design. Contact your Graco distributor for assistance in designing a system to suit your needs. Always mount the pump firmly to a bracket or a tank cover . Never operate the pump while it is not mounted. S ...

  • Graco Inc. 205626 - page 5

    308655J 5 Installation System Accessories CAUTION Do not hang the air accessories directly on the air inlet (E). The fittings are not strong enough to support the accessories and may cause one or more to break. Provide a bracket on which to mount the accessories. NOTE: Install the following accessories in the order shown in Fig. 1. Four accessories ...

  • Graco Inc. 205626 - page 6

    6 308655J Installation Grounding Proper grounding is an essential part of maintaining a safe system. T o reduce the risk of static sparking, ground the pump. Check your local electrical code for detailed grounding instructions for your area and type of equipment. Be sure to ground this equipment: D Pump: Use a ground wire and clamp as shown in Fig. ...

  • Graco Inc. 205626 - page 7

    308655J 7 Operation Pressure Relief Procedure SKIN INJECTION HAZARD T o reduce the risk of serious bodily injury , including fluid injection or splashing in the eyes or on the skin, always follow this procedure whenever you shut off the pump, check or service any part of the system, install or change dispensing devices, and when you stop dispensing ...

  • Graco Inc. 205626 - page 8

    8 308655J Operation Never allow the pump to run dry of the fluid being pumped. A dry pump will quickly accelerate to a high speed, possibly damaging itself, and it may get very hot. CAUTION 7. Read and follow the instructions supplied with each component in your system. 8. If the pump will be unattended for any period of time, if there is an air su ...

  • Graco Inc. 205626 - page 9

    308655J 9 Air Motor and Throat Service Before Y ou Start D Be sure you have all necessary parts on hand. Repair Kit 238751 includes repair parts for the air motor and pump. Use all parts in the kit for the best results. Parts included in the kit are marked with one asterisk, for example (19*), in the text and drawings. See the Parts List on page 14 ...

  • Graco Inc. 205626 - page 10

    10 308655J Air Motor and Throat Service 10. Pull the piston assembly (27) from the air motor base (28), and set it aside. 1 1. Remove the throat bearing (36) with a 1 5/8-in. socket, remove the seal (2*), and wipe the seat clean with a cloth. 12. Remove the piston/base assembly from the vise, and set it upright on the workbench. 13. Inspect the air ...

  • Graco Inc. 205626 - page 11

    308655J 1 1 Air Motor and Throat Service L 05612 25 16 23 15 T urn lock- wires up. Fig. 4 Cut off tops of poppets as indicated by dotted lines. 0.125” (3.18 mm) Cutaway View M 13 31 22* 21* 32* 21* 32* 27 28 32* 21* 17* 31 14 17* 21* 32* 26* 27 26* 14 19* 04422 12 13 15 Reassembly 1. Place the piston rod (29) flats in the vise with the air motor ...

  • Graco Inc. 205626 - page 12

    12 308655J Air Motor and Throat Service 12. Grease and reinstall the seal (2*) with the lips down, thread the throat bearing (36) into the air motor base (28), and torque the throat bearing to 30 to 40 ft-lb (41 to 54 N.m) using a 1 5/8-in. socket. 13. Slide the piston rod (29) down through the pack- ing, and lower the piston assembly (27) into the ...

  • Graco Inc. 205626 - page 13

    308655J 13 Displacement Pump Service Disassembly NOTE: Be sure you have all necessary parts on hand. Repair Kit 238751 includes repair parts for the air motor and pump. Use all parts in the kit for the best results. Parts included in the kit are marked with one asterisk, for example (19*), in the text and drawings. See the Parts List on page 14. 1. ...

  • Graco Inc. 205626 - page 14

    14 308655J Parts List Model 205626, Series K Model 222065, Series C Model 222095, Series C W all-Mount Universal Pump 55-Gallon Drum Cover-Mount Pump 55-Gallon Drum Bung-Mount Pump Includes items 1 to 1 13 Includes items 1 to 1 13, 150, and 151 Includes items 1 to 1 13, 150,152, and 153 Ref No. Part No. Description Qty . 1 AIR MOTOR (items 2 to 36) ...

  • Graco Inc. 205626 - page 15

    308655J 15 Parts Drawing When assembling the fluid cylinder (1 10) over the assembled fluid piston (107, 109, 1 13), use the piston assembly tool included in repair kit 238751 and steps 21 through 23 on page 12 . 16 24 11 30 22* 21* 25 23 12 21* 17* 26* *19 27b 27a 31 15 13 27c 32* 29 3 7 18 36 1 *20 5 28 1 2 T orque to 30 to 40 ft-lb (41 to 54 N.m ...

  • Graco Inc. 205626 - page 16

    16 308655J Dimensions 1/2-in. npt air inlet 3/4-in. npt muffler port Model 205626 25.8 in. (655 mm) MODEL 205626, Series K 3/4-in. npt fluid outlet 18.4 in. (467 mm) 7.4 in. (188 mm) Model 222065 32.3 in. (820 mm) Model 222095 36.6 in. (929 mm) Note: For sealed tank mounting use gasket 192658. 06035 Mounting Hole Layout 2.25-in. (57.2 mm) diameter ...

  • Graco Inc. 205626 - page 17

    308655J 17 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 01234 56 FLUID FLOW––gpm (lpm) T est Fluid: 10-weight oil at 75 _ F (23.9 _ C) T o find fluid outlet pressure at a specific fluid flow and operating air pressure: 1. Locate desired fluid flow along bottom of chart. 2. Follow vertical line up to intersection with selected ...

  • Graco Inc. 205626 - page 18

    18 308655J Graco Standard W arranty Graco w arrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco w ill, for a period of twelve months from t ...

Manufacturer Graco Inc. Category Septic System

Documents that we receive from a manufacturer of a Graco Inc. 205626 can be divided into several groups. They are, among others:
- Graco Inc. technical drawings
- 205626 manuals
- Graco Inc. product data sheets
- information booklets
- or energy labels Graco Inc. 205626
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco Inc. 205626.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco Inc. 205626, service manual, brief instructions and user manuals Graco Inc. 205626. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco Inc. 205626.

Similar manuals

A complete manual for the device Graco Inc. 205626, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco Inc. 205626 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco Inc. 205626.

A complete Graco Inc. manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco Inc. 205626 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco Inc. 205626, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco Inc. 205626, that we can find in the current document
3. Tips how to use the basic functions of the device Graco Inc. 205626 - which should help us in our first steps of using Graco Inc. 205626
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco Inc. 205626
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco Inc. 205626 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco Inc. 205626?

Use the form below

If you did not solve your problem by using a manual Graco Inc. 205626, ask a question using the form below. If a user had a similar problem with Graco Inc. 205626 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)