English dropdown-ico

Manual Regency I31-LPG3

28 pages 3.21 mb
Download

Go to site of 28

Summary
  • Regency I31-LPG3 - page 1

    Model: I31-NG3 I31-LPG3 Owners & Installation Manual 06/01/07 LISTINGS AND CODE APPROVALS These gas appliances have been tested in accordance with AS4553-2000, NZS 5262 and have been certified by the Australian Gas Association for installation and operation as described in these Installation and Operating Instructions. Your unit should be servi ...

  • Regency I31-LPG3 - page 2

    2 Regency I31-3 Gas Fireplace Inbuilt REGENCY GAS FIREPLACE INBUIL T FIREPLACE TO THE NEW OWNER Congratulations! You are the owner of a state-of-the-art Gas Inbuilt Fireplace by Regency Industries. The Regency Gas Fireplace Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a fireplace, at the flick ...

  • Regency I31-LPG3 - page 3

    3 Regency I31-3 Gas Fireplace Inbuilt T ABLE OF CONTENTS REGENCY GAS FIREPLACE INSERT Operating Instructions Operating Instructions ................................................ 1 6 Lighting Procedure ...................................................... 1 6 Shutdown Procedure .................................................. 1 6 First Fire .. ...

  • Regency I31-LPG3 - page 4

    4 Regency I31-3 Gas Fireplace Inbuilt DA T A BADGE (Australia Only) This is a copy of the label that accompanies each Regency I31-3 Gas Inbuilt fireplace. We have printed a copy of the contents here for your review. DATA BADGE NOTE: Regency units are con- stantly being improved. Check the label on the unit and if there is a difference, the label on ...

  • Regency I31-LPG3 - page 5

    5 Regency I31-3 Gas Fireplace Inbuilt INST ALLA TION IMPORT ANT : SA VE THESE INSTRUCTIONS The Regency Gas Fireplace must be installed in accordance with these instructions. Carefully read all the instructions in this manual first. Note: Failure to follow these instructions could cause a malfunction of the heater which could result in death, seriou ...

  • Regency I31-LPG3 - page 6

    6 Regency I31-3 Gas Fireplace Inbuilt GAS CONNECTION 3) Locate the center point where the flue will pass through the chimney above the appli- ance. Move the appliance into the exact location where it is to be installed. Ensure that the Insert is level. 4) The installer must provide a valve with a plugged tapping, accessible for test gauge connectio ...

  • Regency I31-LPG3 - page 7

    7 Regency I31-3 Gas Fireplace Inbuilt TEST FOR FLUE SPILLAGE A " spillage" test must be made before the installed unit is left with the custom- er. Follow the procedure below: 1) Start all exhaust fans in the home and then close all external doors and windows in the house. 2) Light the unit and set controls to maximum. Turn fan off. 3) Af ...

  • Regency I31-LPG3 - page 8

    8 Regency I31-3 Gas Fireplace Inbuilt LOG SET INST ALLA TION Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot operation. The gas log kit contains the following: a) 02-43 Rear Log 90 2- 2 27 b) 02-45 Front Right Log 9 02 -2 29 c) ...

  • Regency I31-LPG3 - page 9

    9 Regency I31-3 Gas Fireplace Inbuilt Logs D)02-46 and E)02-47 in position. 6) Place the Left Top Log D)02-46 on the pin on Log C)02-56 and on top of the cutout on Log A)02-43. 7) Place the notch in Center Log E)02-47 over Log B)02-45 and across the cutout on Log A)02-43. Cutout Pin Cutout Notch 8) Position notch in Front Right Log F)02-48 on Log E ...

  • Regency I31-LPG3 - page 10

    10 Regency I31-3 Gas Fireplace Inbuilt FLUSH FRONT INST ALLA TION 1 ) Install Logs before going on to the next step. See the Log Installation instruction sheet or page 8 in the manual. 2 ) Install the bottom glass trim by hooking the trim into the lip on the firebox base. The trim will not fit into place if the glass is installed first. Diagram 1 D ...

  • Regency I31-LPG3 - page 11

    11 Regency I31-3 Gas Fireplace Inbuilt BA Y FRONT INST ALLA TION 1) Place the bay door onto the 2 pins on the top of the unit. 2) Install bottom louvre by sliding the two bracket clips into the brackets located un- derneath the bay door and secure with 2 screws into the bracket on the bottom of the Bay Front as per diagram above. 3) Slide the valve ...

  • Regency I31-LPG3 - page 12

    12 Regency I31-3 Gas Fireplace Inbuilt HAMPTON CAST F ACEPLA TE INST ALLA TION 1) Lay the faceplate panels flat, face down on something soft so they don't scratch. 2) Attach the side filler brackets to the left and right sides using 3 screws and washer per side. 3) Attach the right and left cast sides to the top using 2 screws per side. 5) Con ...

  • Regency I31-LPG3 - page 13

    13 Regency I31-3 Gas Fireplace Inbuilt 11) Mount the cast faceplate panels onto the insert body, sliding the side filler brackets into the space between the glass and the firebox. Secure using the 4 remaining black screws, 2 per side. 12) Install the glass trim by inserting the side hooks on the glass trim into the 4 slots between the faceplate and ...

  • Regency I31-LPG3 - page 14

    14 Regency I31-3 Gas Fireplace Inbuilt BAROSSA CURVED FRONT INST ALLA TION 1) Install bottom louver by matching the holes in louver bracket with holes in firebox frame and secure using 2 screws on each side. 2) Pull down louver. 3) Fix brackets onto firebox, one on each side using 1 screw per side. 4) Fit plates on back of screen into brackets on t ...

  • Regency I31-LPG3 - page 15

    15 Regency I31-3 Gas Fireplace Inbuilt INST ALLA TION Thermostat Wire Table CAUTION Do not connect the millivolt wall thermostat wires to the 240 V wires. Recommended Maximum Lead Length (Two-Wire) When Using Wall Thermostat (CP-2 System) OPTIONAL REMOTE CONTROL Use the Optional Remote Control Kit approved for this unit. Use of other systems may vo ...

  • Regency I31-LPG3 - page 16

    16 Regency I31-3 Gas Fireplace Inbuilt OPERA TING INSTRUCTIONS 4) Wait five minutes to allow gas, that may have accumulated in the main burner compart- ment, to escape. If you do smell gas, follow the instructions on the front of this manual. If you don't smell gas continue on to the next step. 5) Turn the gas control counter clockwise to &quo ...

  • Regency I31-LPG3 - page 17

    17 Regency I31-3 Gas Fireplace Inbuilt MAINTENANCE INSTRUCTIONS 1) Always turn the gas valve to off before cleaning. For relighting, re- fer to lighting instructions. Keep the burner and control compartment clean by brushing and vacuuming at least once a year. When cleaning the logs, use a clean soft paint brush as the logs are fragile and easily d ...

  • Regency I31-LPG3 - page 18

    18 Regency I31-3 Gas Fireplace Inbuilt Top View of pilot flame Correct flame pattern has two strong blue flames: 1 flowing around the ther- mopile and 1 reaching towards the rear burner (it does not have to be touching the burner). Top View of pilot flame Incorrect flame pattern will have small, probably yellow flames, not coming into proper contac ...

  • Regency I31-LPG3 - page 19

    19 Regency I31-3 Gas Fireplace Inbuilt FAN MAINTENANCE If your fan requires maintenance or replace- ment, access to the fan is through the plate on the rear wall of the firebox. NOTE: the unit MUST NOT be operated without the fan access panel securely in place. CAUTION: Label all wires prior to disconnection when servicing controls. Wiring error ca ...

  • Regency I31-LPG3 - page 20

    20 Regency I31-3 Gas Fireplace Inbuilt SERVICE SHOULD BE CARRIED OUT BY AUTHORIZED PERSONNEL ONLY ABNORMAL OPERATION If main burner does not light but pilot stays on, shut down heater and contact your dealer. If excessive carbon on logs or glass contact your dealer for service. TROUBLE SHOOTING REGENCY GAS SP ACE HEA TER SYMPTOM 1 ) Thin black coat ...

  • Regency I31-LPG3 - page 21

    21 Regency I31-3 Gas Fireplace Inbuilt P ARTS LIST MAIN ASSEMBL Y Part # Description Part # Description 1 ) 400-011 Fan Opening Cover 2 ) 910-169/P Fan Motor (240 V) 4 ) 910-714 Power Cord 240 Volts 910-707 Wire Harness (Fan end) 910-771 Wire Harness (Faceplate) 5 ) 400-068 Thermodisc Cover Mounting Plate 6 ) 400-023 Thermodisc Bracket 7 ) 910-142 ...

  • Regency I31-LPG3 - page 22

    22 Regency I31-3 Gas Fireplace Inbuilt BURNER ASSEMBL Y & LOG SET Part # Description P ARTS LIST 402-565/P Valve Assembly - NG 402-566/P Valve Assembly - LPG 52) 910-026 RobertShaw Valve - NG 910-027 RobertShaw Valve - LPG 53) 910-190 Piezo Ignitor and nut 5 4 ) * Valve Heat Shield 55) 904-702 Gasket - Valve Heat Shield 5 6 ) * Pilot Bracket 57 ...

  • Regency I31-LPG3 - page 23

    23 Regency I31-3 Gas Fireplace Inbuilt P ARTS LIST FACEPLA TE ASSEMBL Y Part # Description Part # Description 87) 910-140 Fan HI/OFF/LOW Switch 88) 910-246 Burner ON/OFF Switch 403-912 Faceplate & Trim Complete - Regular 9 1 ) * Faceplate Side Right - Regular 9 2 ) * Faceplate Top - Regular 9 3 ) * Faceplate Side Left - Regular 401-522 Trims Pa ...

  • Regency I31-LPG3 - page 24

    24 Regency I31-3 Gas Fireplace Inbuilt P ARTS LIST BA Y & FLUSH FRONT ASSEMBL Y Part # Description Part # Description Bay Door 400-988 Complete Bay Front c/w Black Trim 102) * Glass Retainer Side (Top & Btm) 103) * Glass Retainer Front (Top & Btm) 106) 940-315/P Side Glass 107) 936-243 Gasket 108) 940-314/P Center Glass 110) 902-183 Bay ...

  • Regency I31-LPG3 - page 25

    25 Regency I31-3 Gas Fireplace Inbuilt 403-911 Cast Faceplates (Set) - Black Metallic 403-916 Cast Faceplates (Set) - Black Enamel 187) * Burner On/Off Switch 188) * Fan Speed Control 189) * Knob - Black Cast Surround 201) * Cast Faceplate - Right 202) * Cast Faceplate - Top 203) * Cast Faceplate - Left 205) * Flush Glass Frame 194) * Mounting Flan ...

  • Regency I31-LPG3 - page 26

    26 Regency I31-3 Gas Fireplace Inbuilt _____________________________________________________________________________________ ____________________________________________________________ __________________________________________________________ ____________________________________________________________ ____________________________________________ ...

  • Regency I31-LPG3 - page 27

    27 Regency I31-3 Gas Fireplace Inbuilt W ARRANTY Exclusions: This limited Lifetime Warranty does not extend to or include paint, door or glass gasketing or trim. It does not cover installation and operational related problems such as over- firing, downdrafts or spillage caused by environmental con- ditions, nearby trees, buildings, hilltops, mounta ...

  • Regency I31-LPG3 - page 28

    Printed in Canada © Copyright 2007, FPI Fireplace Products International Ltd. All rights reserved. ...

Manufacturer Regency Category Fire Pit

Documents that we receive from a manufacturer of a Regency I31-LPG3 can be divided into several groups. They are, among others:
- Regency technical drawings
- I31-LPG3 manuals
- Regency product data sheets
- information booklets
- or energy labels Regency I31-LPG3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Regency I31-LPG3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Regency I31-LPG3, service manual, brief instructions and user manuals Regency I31-LPG3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Regency I31-LPG3.

Similar manuals

A complete manual for the device Regency I31-LPG3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Regency I31-LPG3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Regency I31-LPG3.

A complete Regency manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Regency I31-LPG3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Regency I31-LPG3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Regency I31-LPG3, that we can find in the current document
3. Tips how to use the basic functions of the device Regency I31-LPG3 - which should help us in our first steps of using Regency I31-LPG3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Regency I31-LPG3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Regency I31-LPG3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Regency I31-LPG3?

Use the form below

If you did not solve your problem by using a manual Regency I31-LPG3, ask a question using the form below. If a user had a similar problem with Regency I31-LPG3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)