Manual Jura Capresso 13429

29 pages 0.49 mb
Download

Go to site of 29

Summary
  • Jura Capresso 13429 - page 1

    I MP RE SSA X s 90 / X s 95 Instructions for use ...

  • Jura Capresso 13429 - page 2

    Legend:  DISPLAY: serves as information.  DISPLAY: please follow the instructions shown. = Note = Important = Tip ...

  • Jura Capresso 13429 - page 3

    Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 11 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 12 Fig. 9 Fig. 10 Fig. 13 1 2 3 Fig. 14 Fig. 15 ...

  • Jura Capresso 13429 - page 4

    1 2 3 17 7 10 9 8 12 11 13 14 16 15 18 19 21 20 22 26 25 24 23 27 6 4 5 Description of the machine 1. Drip tray 2. Drip grate 3. Programming door 4. Rotary Switch 5. Selection key for pre-ground coffee 6. Coffee à la Carte key 7. 1 Coffee key 8. 2 Coffees key 9. 1 Espresso key 10. 2 Espressos key 11. ON / OFF key 12. Rinse key 13. Display dialog s ...

  • Jura Capresso 13429 - page 5

    5 Contents 1. Safety information .............................................. page 6 1.1 Warnings ................................................ page 6 1.2 Precautions .............................................. page 6 2. Before you start using the IMPRESSA .................... page 6 2.1 Checking the mains voltage .......................... ...

  • Jura Capresso 13429 - page 6

    6 Before you begin Congratulations on having bought this IMPRESSA! In order to ensure perfect operation of your IMPRESSA, carefully read this operating manual and keep it for future reference. Should you need more information or meet with particular prob- lems not specified in these operating instructions in sufficient detail, please contact JURA E ...

  • Jura Capresso 13429 - page 7

    7 2.3 Filling the water tank Only use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids.  Take out the water tank and thoroughly rinse it out with cold tap water.  Then fill it with water and place it back into the coffee machine. Make sure the tank is installed correctly and that it engages properly. 2.4 ...

  • Jura Capresso 13429 - page 8

    8  Place a receptacle under the 2-stage frothing jet (24) and press one of the Steam keys .  The system now fills up automatically. A little water will leak from the frothing jet.  SYSTEM FILLING  HEATING UP  PRESS RINSE  Place a cup under the height-adjustable coffee spout (18).  Press Rinse .  MACHINE RINSING  Now the w ...

  • Jura Capresso 13429 - page 9

    9  Now turn the Rotary Switch (4) until the following message is displayed:  EXIT  Now press the Rotary Switch (4) to leave the programming mode.  SELECT PRODUCT 5. Using a CLARIS plus filter cartridge When using the CLARIS plus filter cartridge correctly, de- calcifying your IMPRESSA will no longer be necessary. For more information on ...

  • Jura Capresso 13429 - page 10

    10  Fill the water tank (14) with cold, fresh tap water and place it back into the machine.  Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys to start the filter rinsing process.  FILTER RINSING  Filter rinsing stops automatically.  SELECT PRODUCT You can also ...

  • Jura Capresso 13429 - page 11

    11  1 ESPRESSO (example) POWDER  The coffee brewing process stops automatically as soon as the set amount of water has run through.  SELECT PRODUCT To stop the brewing process prematurely, press any of the product keys. We recommend always using powder from fresh coffee beans or pre-ground, vacuum-packed coffee. Never fill in more than 2 s ...

  • Jura Capresso 13429 - page 12

    12 To stop the process prematurely, turn the switch (22) back to . You can also change the amount of water set while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approxi ...

  • Jura Capresso 13429 - page 13

    13  Dip the 2-stage frothing jet (24) into the milk and press the key.  DRAW OFF STEAM  When you have frothed the milk to your liking, pres the key again. 11.3 Attaching the Professional-Cappuccino Frother to the IMPRESSA  Remove the 2-stage frothing jet (24).  Now attach the Professional-Cappuccino Frother (Fig. 6).  Press the ho ...

  • Jura Capresso 13429 - page 14

    14  MACHINE RINSING  The coffee spout (18) is rinsed. 13. Programming The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste. The following parameters can be adjusted: ...

  • Jura Capresso 13429 - page 15

    15  SELECT PRODUCT  Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.  FILTER NO or YES  Turn the Rotary Switch (4) until the following message is dis- played:  POWDER QUANTITY  Now press the Rotary Switch (4) to start programming.  SELECT PRODUCT  Then press a product key of your ...

  • Jura Capresso 13429 - page 16

    16 13.6 Programming the temperature for coffee, espresso and coffee à la carte You can adjust the temperature for each type of coffee separately. The temperature can be set to 2 different levels (NORMAL, HIGH).  SELECT PRODUCT  Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.  FILTER NO or YES ...

  • Jura Capresso 13429 - page 17

    17  FILTER NO or YES  Turn the Rotary Switch (4) until the following message is dis- played:  STEAM PORTION  Press the Rotary Switch (4) to activate the program item.  PORTION 20 SEC (example)  Turn the Rotary Switch (4) to modify the steam portion and then confirm your setting by pressing the Rotary Switch (4).  STEAM PORTION ...

  • Jura Capresso 13429 - page 18

    18 Select this setting if you make mostly black coffees and are prepared to wait for approx. 1 minute before being able to draw steam. Economy mode 2 Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up each time you make coffee or need to draw steam. The IMPRESSA switches to economy temperatur ...

  • Jura Capresso 13429 - page 19

    19  Now press the Rotary Switch (4) to start programming.  UNIT ON —:—  Turn the Rotary Switch (4) to set the hours.  UNIT ON 07:00 (example)  Press the Rotary Switch (4) to confirm the hours and to activate the minutes.  UNIT ON 07:00  Turn the Rotary Switch (4) to set the minutes.  UNIT ON 07:15 (example)  Press the ...

  • Jura Capresso 13429 - page 20

    20  LANGUAGE ENGLISH  Turn the Rotary Switch (4) to set the language.  LANGUAGE ENGLISH (example)  Confirm your selection by pressing the Rotary Switch (4).  LANGUAGE ENGLISH  Now turn the Rotary Switch (4) until the following message is displayed:  EXIT  Now press the Rotary Switch (4) to leave the programming mode.  SEL ...

  • Jura Capresso 13429 - page 21

    21  Now press the Rotary Switch (4) to access the Information menu.  TOTAL 1000 (example)  Turn the Rotary Switch (4) to display how often you made espresso, 2 espressos, 1 coffee, 2 coffees, coffee à la carte, pow- der, water and steam.  Finally, the number of cleaning and decalcifying cycles and filter changes are displayed.  To e ...

  • Jura Capresso 13429 - page 22

    22 If this information is displayed, the machine will no longer make coffee. Refill water as described in Chapter 2.3.  SELECT PRODUCT The water tank should be rinsed out and filled with fresh water daily. Always use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids. 15.2 Emptying the coffee grounds  EMPTY ...

  • Jura Capresso 13429 - page 23

    23  Remove the screw in the bean tank (Fig. 9) and fold the finger protection device up (Fig. 10).  Insert the key (Fig. 11).  Now turn the key counter-clockwise until the jammed stone is released.  Remove any remaining powder with a vacuum cleaner.  Fold the finger protection device (Fig. 10) down and screw it tight.  Fill the be ...

  • Jura Capresso 13429 - page 24

    24 15.11 General cleaning instructions  Never use sharp objects or caustic chemicals for cleaning.  Clean the case using a soft, damp cloth.  Clean the pivoting steam spout (23) after each use.  After heating milk, draw off some hot water to clean the inside of the pivoting steam spout (23).  Remove the Professional-Cappuccino Frothe ...

  • Jura Capresso 13429 - page 25

    25  When the cleaning program has finished, take out the removable coffee powder tank and briefly rinse it under running water. You can also trigger a cleaning cycle manually at any point in time (see Chapter 13.3). 17. Decalcifying The IMPRESSA features an integrated decalcifying program. The process takes approx.50 minutes. Lime scale builds u ...

  • Jura Capresso 13429 - page 26

    26  You will hear an acoustic signal.  EMPTY TRAY / EMPTY GROUNDS  Empty out the drip tray (1) and the coffee grounds bin (Fig. 15).  TRAY MISSING  Place the empty, clean drip tray (1) and the coffee grounds bin back into the IMPRESSA.  FILL WATER TANK / RINSE WATER TANK Thoroughly rinse out the water tank and fill it with fresh c ...

  • Jura Capresso 13429 - page 27

    27 20. Problems Problem Cause Remedy Grinding gear makes a very loud noise Foreign body in the grinding gear Please refer to Chapter 14.6 Too little froth when frothing milk Professional Cappuccino Frother clogged Clean frother (Chapter 11.5) Coffee only drips from the coffee spout Grinding degree too fine Adjust grinding gear to coarser grind Pre- ...

  • Jura Capresso 13429 - page 28

    28 21. Legal information These operating instructions contain all the information required for operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during mainte- nance. These ...

  • Jura Capresso 13429 - page 29

    Art. 67306 – 4/07 JURA Elektroappar ate A G – Kaffee weltstrasse 1 0 – CH-4626 Niederbuchsiten www.jura. com ...

Manufacturer Jura Capresso Category Coffeemaker

Documents that we receive from a manufacturer of a Jura Capresso 13429 can be divided into several groups. They are, among others:
- Jura Capresso technical drawings
- 13429 manuals
- Jura Capresso product data sheets
- information booklets
- or energy labels Jura Capresso 13429
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jura Capresso 13429.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jura Capresso 13429, service manual, brief instructions and user manuals Jura Capresso 13429. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jura Capresso 13429.

A complete manual for the device Jura Capresso 13429, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jura Capresso 13429 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jura Capresso 13429.

A complete Jura Capresso manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jura Capresso 13429 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jura Capresso 13429, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jura Capresso 13429, that we can find in the current document
3. Tips how to use the basic functions of the device Jura Capresso 13429 - which should help us in our first steps of using Jura Capresso 13429
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jura Capresso 13429
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jura Capresso 13429 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jura Capresso 13429?

Use the form below

If you did not solve your problem by using a manual Jura Capresso 13429, ask a question using the form below. If a user had a similar problem with Jura Capresso 13429 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)