Manual Pelco FR8316

20 pages 0.38 mb
Download

Go to site of 20

Summary
  • Pelco FR8316 - page 1

    INST ALLA TION FT8316/FR8316 Fiber T ransmitter and Receiver Sixteen-Channel Digitally Encoded Video C2603M (6/06) ...

  • Pelco FR8316 - page 2

    ...

  • Pelco FR8316 - page 3

    C2603M (6/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Overview . . . . . . . . . . . . . . . . . . ...

  • Pelco FR8316 - page 4

    4 C2603M (6/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near ...

  • Pelco FR8316 - page 5

    C2603M (6/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NO ...

  • Pelco FR8316 - page 6

    6 C2603M (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This ...

  • Pelco FR8316 - page 7

    C2603M (6/06) 7 Product Overview DESCRIPTION The FT8316/FR8316 fi ber transmitter and receiver provide the ability to transmit up to 16 composite video channels over one optical fi ber (refer to Figure 1). Figure 1. Sixteen-Channel Video FT8316 T ransmitter and FR8316 Receiver Features of the FT8316/FR8316 fi ber optic transmission system includ ...

  • Pelco FR8316 - page 8

    8 C2603M (6/06) MODELS The FT8316/FR8316 fi ber transmitter and receiver consist of the following series of models: Multimode Models:* FT8316MSTR Sixteen-channel fiber optic video transmitter; multimode, ST connector FR8316MSTR Sixteen-channel fiber optic video receiver; multimode, ST connector Single-Mode Models:* FT8316SSTR Sixteen-channel fi ...

  • Pelco FR8316 - page 9

    C2603M (6/06) 9 FRONT PANEL The front panel of the FT8316 transmitter and FR8316 receiver provides LED indicators that a llow you to monitor signal status, laser status (transmitter only), and operating power. The following sections provide a view of the front panel of the transmitter and receiver. FRONT PANEL - FT8316 T RANSMITTER Figure 2 illustr ...

  • Pelco FR8316 - page 10

    10 C2603M (6/06) FRONT PANEL - FR8316 RECEIVER Figure 3 illustrates the front panel of the FR8316 receiver. Figure 3. Front Panel of FR8316 Receiver For detailed information about the front-panel indicators, refer to the T roubleshooting section.  VIDEO PRESENT LEDs 1-16  OPTIC FAUL T LED, optical signal status indicator, channels 1-8  OPT ...

  • Pelco FR8316 - page 11

    C2603M (6/06) 11 REAR PANEL Connections to the FT8316 transmitter and FR8316 receiver are made to the rear panel of the modules (refer to Figure 4). Figure 4. Rear Panel of FT8316 T ransmitter and FR8316 Receiver For additional information about rear-panel connections, refer to the Installation section.  RACK POWER/ALARM CONNECTOR, 4-pin connect ...

  • Pelco FR8316 - page 12

    12 C2603M (6/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT8316 transmitter or FR8316 receiver 1 Regulated switching power supply with either of the following: • Four plug adapters (North American, Australian, U.K., and European); 100-240 V AC, 50-60 Hz input, 12 VDC (25 W) output or • Three power cords (North American ...

  • Pelco FR8316 - page 13

    C2603M (6/06) 13 CONNECTIONS Connections to the FT8316 transmitter and FR8316 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC ...

  • Pelco FR8316 - page 14

    14 C2603M (6/06) T roubleshooting LED indicators on the front panel of the FT8316 transmitter and FR8316 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status , laser status (transmitter only), and operating power . T able A provides information about the front-panel indicators and associated troubleshooting ...

  • Pelco FR8316 - page 15

    C2603M (6/06) 15 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the trans- mitter . Optic Fault LED is also red. Refer to the Optic Fault LED - Receiver section in this table. Video source is not powered on. Check power connection to the video source. Vide ...

  • Pelco FR8316 - page 16

    16 C2603M (6/06) Optic Fault LED - Receiver Green The optical signal is being received from the transmitter . – No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections. Replace power supply if necessary . Fiber optic cable is not connected. Check fiber optic ...

  • Pelco FR8316 - page 17

    C2603M (6/06) 17 Specifications VIDEO Number of Channels 16 Modulation T ype Pulse code modulation, 8-bit resolution Video Input (FT8316)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8316) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.58 MHz Differential Gain <1% Differential Phase <1.2° T ilt <1% Signal-to-Noise ...

  • Pelco FR8316 - page 18

    18 C2603M (6/06) OPTICAL POWER BUDGET AND TRANSMISSION DIST ANCE Model No. Wavelength Optical Power Budget Maximum T ransmission Distance T ransmitter Compatible Receiver Multimode (62.5/125 µm) FT8316MSTR FR8316MSTR 1275 nm 1300 nm 18 dB* † 1 km (0.6 mi) ‡ Single-Mode (9/125 µm) FT8316SSTR FR8316SSTR 1275 nm 1300 nm 18 dB* 26 km (16.1 mi) § ...

  • Pelco FR8316 - page 19

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted p ...

  • Pelco FR8316 - page 20

    Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Satellite Radio

Documents that we receive from a manufacturer of a Pelco FR8316 can be divided into several groups. They are, among others:
- Pelco technical drawings
- FR8316 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco FR8316
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco FR8316.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco FR8316, service manual, brief instructions and user manuals Pelco FR8316. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco FR8316.

Similar manuals

A complete manual for the device Pelco FR8316, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco FR8316 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco FR8316.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco FR8316 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco FR8316, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco FR8316, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco FR8316 - which should help us in our first steps of using Pelco FR8316
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco FR8316
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco FR8316 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco FR8316?

Use the form below

If you did not solve your problem by using a manual Pelco FR8316, ask a question using the form below. If a user had a similar problem with Pelco FR8316 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)