Manual Honeywell PW-6000

36 pages 0.46 mb
Download

Go to site of 36

Summary
  • Honeywell PW-6000 - page 1

    July 2007 © 2007 Honeywe ll. All rights reserved. 800-00005 PW -6000 Intellig ent Contr oller Installation and Configuration Guide P ar t Number: PW6K1IC ...

  • Honeywell PW-6000 - page 2

    Copyright© 2007 Honeywell. All right s reserved. All product and brand names are the service ma rks, trademarks, registe red trademarks, or registered service marks of their respec tive owners. Printed in the United S tates of America. Honeywell reserves th e right to change an y inform ation in this document at any time without prior notice. Micr ...

  • Honeywell PW-6000 - page 3

    ...

  • Honeywell PW-6000 - page 4

    PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A iii C ONTENT S Notices........................ .................. .................. .................................... ................... 1 Warnings and Cautions .................................... ........................................ ...... 1 Damage During S ...

  • Honeywell PW-6000 - page 5

    PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A v L IST OF F IGURES Figure 1: PW-6000 Conn ections, LEDs, and DIP Sw itches .............................. 7 Figure 2: PW-6000 Power Terminals ........................... .................................... 13 Figure 3: PW-6000 Port Wiring ........ .................. ...

  • Honeywell PW-6000 - page 6

    PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A vii L IST OF T ABLES Table 1 PW-6000 Jumper Settings ....................... ......................................... .. 8 Table 2 PW-6000 DIP Switch Settings ........ .................................... ................ 9 Table 3 PW-6000 Technical Specifications .. ...

  • Honeywell PW-6000 - page 7

    viii www.honeywell.com ...

  • Honeywell PW-6000 - page 8

    PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 1 PW -6000 Installation 1 Notices 1.1 W arnings and Cautions Before Inst allation Wa r n i n g: Before installation, TURN OFF the external circuit breaker which supplies power to the system. Before connecting the device to the power su pply , verify that the output voltage is within spe ...

  • Honeywell PW-6000 - page 9

    2 www .honeyw ell.com PW-6000 Installation Notices Earth Grounding Wa r n i n g: EAR TH ground all enclosures for pr oper installation. Use Suppressors Wa r n i n g: Use suppressors on all door strikes. Use S-4 suppressors for installation. Honeywell Integrated Security , Inc. recommends only D C strikes. 1.2 Damage During Shipment Caution: IF ANY ...

  • Honeywell PW-6000 - page 10

    PW-6000 Installation Notices PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 3 1.4 Disclaimer – Product Liab ility; Mutual Indemnification If a Customer receives a claim that a Product or any component thereof has caused personal injury or damage to th e property of others, Custo mer shall immediately notify Honeywell Integrated Se ...

  • Honeywell PW-6000 - page 11

    4 www .honeyw ell.com PW-6000 Installation Notices Show the RMA number on all packages ship ped. Packages, which are not marked with an RMA number will be refused at the factory and returned to you COD. Carefully pack the equipmen t for shipment. Use the original packing material whenever pos sible 1.7 Limited W arranty All Products so ld or licens ...

  • Honeywell PW-6000 - page 12

    PW-6000 Installation Product Overview PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 5 Customer shall not copy the des ign of any of the Produc ts or use or cause to be used any Product design or related materials for its own b enefit or for the benefit of any other party . The covenants contained in th is section shall remain effec ...

  • Honeywell PW-6000 - page 13

    6 www .honeyw ell.com PW-6000 Installation Product Overview 2.3 Other • An on-board real time clock maintains th e date and time, taking into account leap year and accounting for global time zones and daylight savings time changes. • The database for the system configur ation and card holders are stor ed in FLASH memory . • The event log b uf ...

  • Honeywell PW-6000 - page 14

    PW-6000 Installation Product Overview PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 7 Figur e 1: PW -6000 Connections, LEDs, and DIP Switches ...

  • Honeywell PW-6000 - page 15

    8 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware 3 Setting Up the PW -6000 Hard ware The PW -6000 processor is configured with 12 jumpers and a set of 4 DIP switches. These jumpers/switches set up the port in terface, end of line termination, and operating mode configuration. Refer to the tables below to set the jumpers a ...

  • Honeywell PW-6000 - page 16

    PW-6000 Installation Setting Up the PW-6000 Hardware PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 9 3.2 Setting the DIP Switches Dual In-line Package (DIP) switc hes are re ad when the system powers up, except where noted otherwise. The followi ng table shows the setting opti ons. T able 2 PW -6000 DIP Switch Settings S1 S2 S3 S4 ...

  • Honeywell PW-6000 - page 17

    10 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware The PW -6000 DIP switches need to be set twice: 1. Configure the S4-S3-S2-S1 DIP switches to off-off-on-off to set the default TCP/IP address to 192.168.0.251. 2. Apply power to the panel to set the IP address. 3. Change the S4-S3-S2-S1 combination to off-off-off-on .(DIP ...

  • Honeywell PW-6000 - page 18

    PW-6000 Installation Setting Up the PW-6000 Hardware PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 11 3.3 T echnical Specifications T able 3 PW -6000 T echnical Specifications Category Description W ARNING: PW -6000 is manufactured for use in low-voltage, Class 2 circuits only . Primary Power 12Vdc ± 10%, 300mA maximum. 12Vdc @ 24 ...

  • Honeywell PW-6000 - page 19

    12 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware Caution: Locate the power source as close to this boar d as possible. Connect power with minimum of 18A WG wires. Note: POLARITY for 12 VDC power is important. Ma ke sure the +12 VDC is connected to the terminal labeled +12V and the return is connected to the terminal labe ...

  • Honeywell PW-6000 - page 20

    PW-6000 Installation Setting Up the PW -6000 Hardware PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 13 Run TimeSupplying Power to the PW -6000 Interface 3.5 Supplying Power to the PW -6000 Interface The processor accepts 12Vdc for power . Locate power source as close to the unit as possible and connect it with minimum of 18A WG wi ...

  • Honeywell PW-6000 - page 21

    14 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware 3.6 Communications Wiring The PW -6000 proce ssor communicates to the host vi a on-board Ethernet 10Base-T/100Base-TX port or on port 1. Port 1 may be configured as RS-232, two-wire RS-485 or option al Lantronix Ethernet 10Base-T/ 100Base-TX CoBox-Micro interface. The RS-2 ...

  • Honeywell PW-6000 - page 22

    PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 15 4 System Configuration via W eb Interface The PW -6000 comes with Access Control Device Server Manager (ACDSM) . The ACDSM is a built-in web server , through which you can co nfigure network and other system settings. Note ...

  • Honeywell PW-6000 - page 23

    16 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace 4.3 Hom e Page The first screen after the login is the home page whic h displays all the ava ilable config uration links on the left navigation bar: Figur e 6: PW -6000 W eb Server Home Page ...

  • Honeywell PW-6000 - page 24

    PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 17 4.4 Network Settings Click the Network link on the navigation bar to display th e Network Settings screen where you can select the appropriate option button for dynamic or static IP address configuration: Figur e 7: PW -60 ...

  • Honeywell PW-6000 - page 25

    18 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace St atic IP Configuration Method 1. Click the St a t i c I P option button to assign a static IP address, and enter the following information in the appropriate fields: • IP Address • Subnet Mask • Default Gateway 2. Click OK . 4.5 Host Port Click the Host Port ...

  • Honeywell PW-6000 - page 26

    PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 19 1. From PW6000 Communication Address dro p-down list, select one of the eight (0 to 7) available communication addresses for the PW -6000 board. Note: In the previous panels, this selection was made manually by setting the ...

  • Honeywell PW-6000 - page 27

    20 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace IP Client Connection T ype Figur e 9: PW -6000 Host Port Configurat ion Screen with IP Client Connection Note: The PW -6000 panel does not currently supp ort an IP Client connectio n. ...

  • Honeywell PW-6000 - page 28

    PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 21 Serial-RS232, Serial -RS485, Serial-Modem, or Se rial-CoBox Connection T ypes Figur e 10: PW -600 0 Host Port Configuration with Seria l RS-232 Connection 1. From the PW6000 Commun ication Address drop-d own list, select o ...

  • Honeywell PW-6000 - page 29

    22 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace 3. For the Alternate Host Port , make the follo wing selections: a. Connection T ype . If you choose to co nfigure an alternate host port, an d if you have selected Serial-RS232 for the primary host port, select IP Server from the drop-down list for the alternate ho ...

  • Honeywell PW-6000 - page 30

    PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 23 4.7 User Configuration Click the Users link on the navigation bar to display the User screen where you can add, edit, and delete user records: Figur e 12: PW -6000 W eb Server User Info Screen Adding a User Follow these st ...

  • Honeywell PW-6000 - page 31

    24 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace 3. Specify the maximum period of time a session will remain open withou t user activity . If the period expires without user activity , the user is logged out. After specifying the time period, click Save Session T imer to save the setting. 4. Configure the auto-sav ...

  • Honeywell PW-6000 - page 32

    PW-6000 Installation System Configuratio n via Web Interface PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 25 4.9 Apply Setting Screen Click the Apply Setting link on the n avigation bar to apply the selected config uration values: Figur e 14: PW -6000 W eb Server Apply Setting Scr een Click Apply , Reboot to apply all the configur ...

  • Honeywell PW-6000 - page 33

    26 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace ...

  • Honeywell PW-6000 - page 34

    PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A 27 Appendix A PW -6000 W e b Server and Pro-W atch Channels The PW -6000 web server ’ s host port configuration requires correspo n ding changes in the way the Pro-W a tch’ s channels are configured. The PW -6000 web server host ports and the Pro-W atch channel po ...

  • Honeywell PW-6000 - page 35

    28 www.honeywell.com d. Click OK . e. From the Setting menu, select Apply , Reboot . The system will display the “Board is Restarting” message. 3. Set the port configurati on for the Pro-W atch channel: a. In Pro-W atch, click Hardware Configuration on the left navigation bar . b. Right click on your Site to laun ch the mini pop-up menu. c. Sel ...

  • Honeywell PW-6000 - page 36

    For more information: www .honeywell integrated .com Honeywell Access Systems 135 W . Forest Hill A ven ue Oak Creek, WI 53154 414-766-1700 414-766-1798 F ax European Office Boblingerstrasse 17 D-71101 Schonaich Ger many 49-7031-637-782 49-7031-637-769 F ax www .honeywell.com Specifications subject to change without notice. © Honeyw ell. All r igh ...

Manufacturer Honeywell Category Oven

Documents that we receive from a manufacturer of a Honeywell PW-6000 can be divided into several groups. They are, among others:
- Honeywell technical drawings
- PW-6000 manuals
- Honeywell product data sheets
- information booklets
- or energy labels Honeywell PW-6000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honeywell PW-6000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honeywell PW-6000, service manual, brief instructions and user manuals Honeywell PW-6000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honeywell PW-6000.

A complete manual for the device Honeywell PW-6000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honeywell PW-6000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honeywell PW-6000.

A complete Honeywell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honeywell PW-6000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honeywell PW-6000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honeywell PW-6000, that we can find in the current document
3. Tips how to use the basic functions of the device Honeywell PW-6000 - which should help us in our first steps of using Honeywell PW-6000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honeywell PW-6000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honeywell PW-6000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honeywell PW-6000?

Use the form below

If you did not solve your problem by using a manual Honeywell PW-6000, ask a question using the form below. If a user had a similar problem with Honeywell PW-6000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)