-
JVC HM-DH30000U - page 1
REC LINK POWER TIMER STOP/EJECT PL A Y PULL-OPEN HM-DH30000U D-VHS DIGITAL RECORDER INSTRUCTIONS LPT0542-001B For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. MTP NTSC CANCEL TIMER START STOP DATE PLAY R E W < B A C K R E C ...
-
JVC HM-DH30000U - page 2
2 EN Dear Customer , Thank you for purchasing the JVC D-VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This video cassette record ...
-
JVC HM-DH30000U - page 3
EN 3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety . In order not to defeat the built-in safeguards, observe the following basic rules for its inst ...
-
JVC HM-DH30000U - page 4
4 EN SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. ...
-
JVC HM-DH30000U - page 5
EN 5 Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette. 1. DO NOT place the recorder… … in an environment prone to extreme temperatures or humidity. … in direct sunlight. … in a dusty environment. … in an environment where strong magnetic fields are generated. … on a surface ...
-
JVC HM-DH30000U - page 6
6 EN CONTENTS TIMER RECORDING 34 VCR Plus+ ® Timer Programing ..................... 34 Changing VCR Plus+ Setting ........................ 36 Express Timer Programing .......................... 38 Checking program settings ....................................... 40 Canceling or changing program settings .................. 40 VIDEO NA VIGA TION 42 ...
-
JVC HM-DH30000U - page 7
EN 7 S200 DV IN i.LINK IN/OUT DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R Y L P B /C B VIDEO P R /C R S VIDEO S VIDEO AUDIO R IN (L-1) IN (L-2) L (MONO) VIDEO REMOTE PAUSE/ AV COMPU LINK CABLE BOX ANTENNA AUDIO OUT OUT OUT TV IN VHF/UHF IN INST ALLING YOUR NEW VCR Matching T ransformer (not supplied) AC Power Cord Audio Cable (supplied) TV ANTENNA IN ( ...
-
JVC HM-DH30000U - page 8
8 EN S200 DV IN i.LINK IN/OUT DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R Y L P B /C B VIDEO P R /C R S VIDEO S VIDEO AUDIO R IN (L-1) IN (L-2) L (MONO) VIDEO REMOTE PAUSE/ AV COMPU LINK CABLE BOX ANTENNA AUDIO OUT OUT OUT TV IN VHF/UHF IN NOTES: ● T o make the most of the Super VHS picture performance we recommend that you use the supplied S-VIDEO c ...
-
JVC HM-DH30000U - page 9
EN 9 INFORMA TION ● If “AUT O CLOCK” is set to “ON” on the Clock Set screen on page 1 1, the clock will be adjusted automatically by the host channel every hour (except 1 1:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock adjustment can only be performed when the VCR is turned ...
-
JVC HM-DH30000U - page 10
10 EN Clock Setting Perform clock setting only if the clock has not been set correctly by the Plug & Play setting or if you use a cable box. Access the Clock Set screen to perform the Semiauto or Manual Clock Set. Each procedure starts from step 4 after preparation steps below are finished. If you use a cable box, set the clock manually . ( Z p ...
-
JVC HM-DH30000U - page 11
EN 11 Setting clock semiautomatically — Semiauto Clock Set Y ou can change the host channel/D.S.T . /time zone setting manually . First follow steps 1 to 3 on page 10, then go to the following steps. 4 Set Auto Clock to ON Press %fi to move the highlight bar to “AUT O CLOCK”, then press @ # so that “ON” is selected. Then; T o select the ...
-
JVC HM-DH30000U - page 12
12 EN CLOCK SET UP TIME DA TE YEAR – –:– –AM 1/ 1 2001 AUTO CLOCK : ON HOST CH : AUTO (CA TV) D.S.T . : AUTO TIME ZONE : AUTO PRESS ( 5∞ ), THEN ( 2 3 ) PRESS (MENU) TO END Setting clock manually — Manual Clock Set First follow steps 1 to 3 on page 10, then go to the following steps. 4 Set time Press @ # until the desired time appears, ...
-
JVC HM-DH30000U - page 13
EN 13 T uner Setting Setting channels automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, and want to use the ghost reduction function, use Manual Channel Set ( Z pg. 14). 1 Access Main Menu screen Press MENU . 2 Access T uner Set ...
-
JVC HM-DH30000U - page 14
14 EN 3 Access Manual Channel Set screen Press %fi to move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK . 4 Add or skip desired channels T o add channels 1 Press the Number keys or @ # to input a channel number you want to add. 2 Press OK to set to “ADD”. 3 Repeat 1 and 2 to add other channels. T o skip channels 1 Press ...
-
JVC HM-DH30000U - page 15
EN 15 CABLE BOX The following procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer recording. The Controller is effective for recording broadcasts that have been programmed using VCR Plus+ ( Z pg. 34) or Express timer program ...
-
JVC HM-DH30000U - page 16
16 EN CABLE BOX SET UP OFF PRESS ( 2 3 ), THEN (OK) PRESS (MENU) TO END T urn on the VCR and the TV , and select the A V mode on the TV . Setting cable box output channel & brand After installation, set the cable box output’ s channel and its brand correctly; otherwise, the Controller cannot work correctly . 1 T urn on cable box Select a chan ...
-
JVC HM-DH30000U - page 17
EN 17 CABLE BOX BRAND SET UP 1 PRESS NUMBER KEY (0–9) THEN (OK) TO TEST PRESS (MENU) TO END CABLE BOX BRAND SET UP 1 DID YOUR CABLE BOX CHANGE TO CHANNEL 09? 2 YES 3 NO PRESS ( 2 3 ), THEN (OK) PRESS (MENU) TO END 6 Access Cable Box Brand Set screen Press OK . 7 Enter cable box brand Press the appropriate Number keys to enter the brand code from ...
-
JVC HM-DH30000U - page 18
18 EN INITIAL SETTINGS (cont.) The following procedure is required if you receive satellite channels through a DBS (Direct Broadcast Satellite) receiver . The Controller allows the VCR to automatically switch the DBS receiver ’ s channels during timer recording. NOTES: ● The VCR can automatically change the DBS receiver channels using the Contr ...
-
JVC HM-DH30000U - page 19
EN 19 T urn on the VCR and the TV , and select the A V mode on the TV . DBS RECEIVER SET UP OFF PRESS ( 2 3 ), THEN (OK) PRESS (MENU) TO END Setting DBS receiver output channel & brand After installation, set the DBS receiver ’ s output channel and its brand correctly; otherwise, the Controller cannot work correctly . 1 T urn on DBS receiver ...
-
JVC HM-DH30000U - page 20
20 EN 6 Access DBS Receiver Brand Set screen Press OK . 7 Enter DBS Receiver’ s brand Press the appropriate Number keys to enter the brand code from the following list, then press OK . The program currently received through the DBS receiver appears for about 10 seconds. ● If the DBS receiver ’ s channel changes to the channel listed below for ...
-
JVC HM-DH30000U - page 21
EN 21 1 BASIC PLA YBACK AND RECORDING Basic Playback This VCR can check the tape condition during playback (and recording), and realizes the best possible pictures. ● This recorder can play back tapes that have been recorded in D-VHS (MTP), S-VHS and VHS formats. ● When playing back a tape, this recorder automatically identifies the recording f ...
-
JVC HM-DH30000U - page 22
22 EN Basic Playback Features Changing display information Press DISPLA Y during playback. Each time you press the button, the front display panel shows the time counter , the clock time and the tape remaining time in sequence . ● T o display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen ...
-
JVC HM-DH30000U - page 23
EN 23 Selecting monitor sound — Audio Monitor Y ou can select the desired monitor sound. While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows: S-VHS/VHS HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left H ...
-
JVC HM-DH30000U - page 24
24 EN BASIC PLA YBACK AND RECORDING (cont.) Automatic operations after rewinding — Next Function Memory The Next Function Memory “tells” the VCR what to do after rewinding is complete. ● Ensure that the VCR is in stop mode. a– For Automatic Playback Start Press REW ( 1 ) , then press PLA Y ( 3 ) within 2 seconds. b– For Automatic Power ...
-
JVC HM-DH30000U - page 25
EN 25 H Other Useful functions for playback (S-VHS/VHS only) Y ou can also use the following functions for playback. ● V ideo Calibration (S-VHS/VHS only) ( Z pg. 53) When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures. ● ...
-
JVC HM-DH30000U - page 26
26 EN Basic Recording This VCR can check the tape condition during recording (and playback), and realizes the best possible pictures. In addition, this VCR is equipped with the V ideo Navigation function, which allows you to quickly locate the programs you have recorded on a tape. When recording on this VCR, the tapes are automatically numbered so ...
-
JVC HM-DH30000U - page 27
EN 27 T o pause recording Press P AUSE ( 8 ) . T o resume recording, press PLA Y ( 3 ) . T o stop recording Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel. T o rewind the tape (when it is not running) Press REW ( 1 ) . T o fast-for ward the tape (when it is not running) Press FF ( ¡ ) . T o eject the tape Press STOP/EJEC ...
-
JVC HM-DH30000U - page 28
28 EN Basic Recording Features A B Changing display information Press DISPLA Y during recording or recording pause. Each time you press the button, the front display panel shows the time counter , channel number , clock time, and the tape remaining time in sequence. ● T o display the VCR status including the time counter and the clock time on the ...
-
JVC HM-DH30000U - page 29
EN 29 W atching one program while recording another 1 Engage TV mode During recording... ● Change the TV’ s input mode from A V to TV . 2 Select channel for viewing Select the channel you want to watch, on the TV . Showing on-screen display When “SUPERIMPOSE” is set to “ON” ( Z pg. 56), you can see the current VCR status on the TV scree ...
-
JVC HM-DH30000U - page 30
30 EN Accidental erasure prevention T o prevent accidental recording on a recorded cassette, remove its record safety tab. T o record on it later , cover the hole with adhesive tape. Record safety tab Other useful functions for recording Y ou can also use the following functions for recording. ● Recording Resume Function If there is a power outag ...
-
JVC HM-DH30000U - page 31
EN 31 SPECIAL EFFECT PLA YBACK Special Effect Playback T urn on the VCR and the TV , and select the A V mode on the TV . W ith this VCR, you can enjoy special effect playback such as high-speed search, variable-speed sear ch, and still playback and so on. Locating particular scene rapidly — Picture Search 7 High-Speed Picture Search: Possible dur ...
-
JVC HM-DH30000U - page 32
32 EN SPECIAL EFFECT PLA YBACK (cont.) Viewing still picture — Still Picture Playback Press P AUSE ( 8 ) during normal playback. Playback is freezed and a still picture appears. T o resume normal playback, press PLA Y ( 3 ) . NOTE: T o obtain a noiseless still picture, it may be necessary to adjust tracking in slow motion playback before starting ...
-
JVC HM-DH30000U - page 33
EN 33 Viewing slow motion picture — Slow Motion Playback (S-VHS/VHS only) During normal playback or still picture playback: T urn the SHUTTLE ring slowly to the right (forward slow motion) or to the left (reverse slow motion) so that slow motion playback starts.When you release the ring, a still picture appears. ● Holding P AUSE ( 8 ) for more ...
-
JVC HM-DH30000U - page 34
34 EN VCR Plus+ ® Timer Pr ograming T urn on the VCR and the TV , and select the A V mode on the TV . T imer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 24 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method ( 墌 pg. 38) as far as a yea ...
-
JVC HM-DH30000U - page 35
EN 35 PROGRAM PLUS CODE NUM. : 0 12345678 ST ART STOP DA TE 8:00PM 10:00PM 12/24/01 CH MON CA TV 12 STD (SP) PRESS (+/–, SP/EP , 8=DAIL Y 9=WEEKL Y) THEN (OK) PRESS (PROG.) TO END 4 Input receiving channel number The guide channel number , which is assigned to the TV or cable station for the PlusCode number that you entered in step 3 , will appea ...
-
JVC HM-DH30000U - page 36
36 EN TIMER RECORDING (cont.) Changing VCR Plus+ Setting T urn on the VCR and the TV , and select the A V mode on the TV . IMPORT ANT If you have moved to a different area or if a broadcasting station’ s channel number has been changed, the wrong VCR CH or CABLE CH number will be displayed on the Program screen ( Z step 5 on page 35). When this h ...
-
JVC HM-DH30000U - page 37
EN 37 1 Access Main Menu screen Press MENU . 2 Access T uner Set Up screen Press %fi to move the highlight bar (arrow) to “TUNER SET UP”, then press OK . 3 Access Guide Channel Set screen Press %fi to move the highlight bar (arrow) to “GUIDE CHANNEL SET”, then press OK . 4 Input guide channel number Press the Number keys or @ # to input t ...
-
JVC HM-DH30000U - page 38
38 EN TIMER RECORDING (cont.) Y ou can directly program the VCR’ s timer to record up to 24 broadcasts, as far as a year in advance. Remember , the clock must be set before you can program the timer ( 墌 pg. 10). 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. ● ...
-
JVC HM-DH30000U - page 39
EN 39 8 Set tape speed Press HS/STD/LS3/SP/LP ( ) to set the tape speed. 9 Return to normal screen Press PROG. or OK . “PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears. 0 Engage timer recording standby mode Press TIMER . The VCR turns off automatically and “ ‰ ” is displayed on the front display pa ...
-
JVC HM-DH30000U - page 40
40 EN – 1 TIMER RECORDING (cont.) Checking program settings 1 Disengage timer Press TIMER , then press POWER . ● When “AUT O TIMER” ( Z pg. 56) is set to “ON”, you do not have to press TIMER . 2 Access Program List screen Press PROG. CHECK . 3 Access Program screen Press %fi to select a program, then press OK to check more detailed inf ...
-
JVC HM-DH30000U - page 41
EN 41 Other Useful functions for timer recording Y ou can also use the following functions for timer recording. ● Auto Timer ( Z pg. 56) When “AUTO TIMER” is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. Y ou do not have to press TIM ...
-
JVC HM-DH30000U - page 42
42 EN Navigation Playback T urn on the VCR and the TV , and select the A V mode on the TV . This function is useful when you want to quickly find out what programs you have recorded on a tape using this VCR. This function allows you to select a program to watch, and then automatically searches for the beginning of the program. 1 Load a cassette Ins ...
-
JVC HM-DH30000U - page 43
EN 43 Deactivating Video Navigation If you do not want to store program information, you can deactivate the V ideo Navigation function. 1 Access Main Menu screen Press MENU . 2 Access Video Navigation screen Press %fi to move the highlight bar (arrow) to “VIDEO NA VIGA TION”, then press OK . 3 Deactivate Video Navigation Press %fi to move the ...
-
JVC HM-DH30000U - page 44
44 EN VIDEO NA VIGA TION (cont.) Finding T apes T urn on the VCR and the TV , and select the A V mode on the TV . Y ou can find a tape you want using V ideo Navigation. Y ou have four methods to find tapes; by tape number , by recording date, by category , and by tape remaining time. Finding by tape number Use the Remote to do the following operati ...
-
JVC HM-DH30000U - page 45
EN 45 5 Confirm tape number lists ● T o go to another page of the lists, press @ # . ● T o playback the selected tape, insert the corresponding tape on the VCR and press OK . 6 Return to normal screen Press MENU . Finding by recording date Use the Remote to do the following operations. 1 Follow steps 1 to 3 on page 44, then go to the following ...
-
JVC HM-DH30000U - page 46
46 EN Finding blank space Y ou can find a tape whose remaining time is enough for a program you want to record. Use the Remote to do the following operations. 1 Access Main Menu screen Press MENU . 2 Access Video Navigation screen Press %fi to move the highlight bar (arrow) to “VIDEO NA VIGA TION”, then press OK . D VIDEO NA VIGA TION (cont.) ...
-
JVC HM-DH30000U - page 47
EN 47 Editing Titles T urn on the VCR and the TV , and select the A V mode on the TV . When you record a TV program on this VCR, the VCR automatically records the recording start time, date, and channel in each program title. If the tape is recorded for the first time, the tape number and the date and time are recorded in the tape title. Y ou can t ...
-
JVC HM-DH30000U - page 48
48 EN VIDEO NA VIGA TION (cont.) 6 Access edit screen Press %fi to move the highlight bar (arrow) to “EDIT T APE TITLE”, then press OK . 7 Enter title Press the Number keys to enter the title, then press OK . • For entering the characters as the title, refer to “How to enter the characters and symbols” on the right column. (In this examp ...
-
JVC HM-DH30000U - page 49
EN 49 B Entering or Editing program title When you want to edit the program title, follow the procedure below by using the Remote. 1 Load a cassette Insert a tape on which there is a program you want to edit. 2 Access T itle screen Press NA VIGA TION . 3 Select program Press %fi to move the highlight bar (arrow) to the program you want to edit, th ...
-
JVC HM-DH30000U - page 50
50 EN Deleting tape information When you want to delete the entire tape information (information for all recorded programs on the tape), follow the procedure below by using the Remote. • T ape information for the V ideo Navigation function is deleted, but the recorded programs will not be erased. 1 Follow steps 1 to 4 on page 47, then go to the f ...
-
JVC HM-DH30000U - page 51
EN 51 Deleting program information When you want to delete the stored information for each recorded program, follow the procedure below by using the Remote. • Program information for the V ideo Navigation function is deleted, but the recorded program will not be erased. 1 Load a cassette Insert a tape on which there is a program you want to edit. ...
-
JVC HM-DH30000U - page 52
52 EN 123 456 7 89 0 Y ou can use the other useful function settings on the Function Set Up screens by following the procedure described below . ● For the functions you can set on the Function Set Up screen, see pages 53 to 57. 1 Access Main Menu screen Press MENU . 2 Access Function Set Up screen Press %fi to move the highlight bar (arrow) to ? ...
-
JVC HM-DH30000U - page 53
EN 53 * The default setting is bold in the table below . When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures. This takes place whenever you play back a tape or start recording after inserting a tape. NOTES: ● During playback ...
-
JVC HM-DH30000U - page 54
54 EN OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below . Up to four audio signal channels can be input from a DV camcorder through the DV IN connector (i.LINK). This recorder allows you to select and record two of these channels. This setting is used to specify which two channels to record. When there are four DV audi ...
-
JVC HM-DH30000U - page 55
EN 55 Y ou have to select which terminal — either VIDEO (composite) or S-VIDEO (Y/C separate signals) to use as the video input terminal on the front panel. Make sure to select the correct terminal; otherwise, you may fail in recording (editing) on this VCR. Y ou have to select which terminal — either VIDEO (composite) or S VIDEO (Y/C separate ...
-
JVC HM-DH30000U - page 56
56 EN OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below . m AUTO TIMER ON OFF m SUPERIMPOSE ON OFF m GRA Y BACK ON OFF m POWER SA VE MODE ON OFF Additional settings [ADDTL] When this function is set to “ON”, the VCR automatically switches to EP mode to allow complete recording if there is not enough tape to record ...
-
JVC HM-DH30000U - page 57
EN 57 S200 DV IN i.LINK IN/OUT DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R Y L P B /C B VIDEO P R /C R S VIDEO S VIDEO AUDIO R IN (L-1) IN (L-2) L (MONO) VIDEO REMOTE PAUSE/ AV COMPU LINK CABLE BOX ANTENNA AUDIO OUT OUT OUT TV IN VHF/UHF IN * The default setting is bold in the table below . T o A V COMPU LINK II (VCR ONL Y) A V COMPU LINK T elevision T ...
-
JVC HM-DH30000U - page 58
58 EN OTHER USEFUL FUNCTIONS (cont.) i.LINK Set Up i.LINK set up for connected device When you connect i.LINK compatible devices to this VCR, an i.LINK device number is asigned to each device in the order of connection. If you want to change the number , follow the procedure below . 1 Access Main Menu screen Press MENU . 2 Access i.LINK Set Up scre ...
-
JVC HM-DH30000U - page 59
EN 59 What is “i.LINK?” “i.LINK” is a digital serial interface that allows devices equipped with an i.LINK connector to exchange digital video signals, digital audio signals, and device control signals bi-directionally over a single cable. i.Link refers to the IEEE1394-1995 industry specification and extensions thereof. The logo is used for ...
-
JVC HM-DH30000U - page 60
60 EN OTHER USEFUL FUNCTIONS (cont.) NOTES: ● While the Satellite Auto Recording standby mode or after Satellite Auto Recording is finished, the VCR will not enter the timer recording standby mode even though “AUT O TIMER” is set to “ON”. ( Z pg. 56) ● If you turn off this VCR while Satellite Auto Recording is in progress, recording sto ...
-
JVC HM-DH30000U - page 61
EN 61 JLIP ID Number Setting The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device. When connecting this VCR to anothe ...
-
JVC HM-DH30000U - page 62
62 EN Edit Fr om Camcorder T o rear panel REMOTE P AUSE/ A V COMPULINK connector Mini-plug cable (not supplied) (JVC camcorder only) Audio cable (supplied) Camcorder (for playback) T o Audio output T o EDIT This VCR (for recording) T o AUDIO Input EDITING S-video cable (supplied) T o S-video output Various connection for editing tapes The following ...
-
JVC HM-DH30000U - page 63
EN 63 Y ou can use a camcorder as the playback VCR and your VCR as the recording VCR. 1 Make connections A S-VHS/VHS connection Connect an audio cable between the camcorder ’ s audio output connectors and your VCR’ s audio input connectors. ● When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the cam ...
-
JVC HM-DH30000U - page 64
64 EN S200 DV IN i.LINK IN/OUT DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R Y L P B /C B VIDEO P R /C R S VIDEO S VIDEO AUDIO R IN (L-1) IN (L-2) L (MONO) VIDEO REMOTE PAUSE/ AV COMPU LINK CABLE BOX ANTENNA AUDIO OUT OUT OUT TV IN VHF/UHF IN S200 DV IN i.LINK IN/OUT DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL R Y L P B /C B VIDEO P R /C R S VIDEO S VIDEO AUDI ...
-
JVC HM-DH30000U - page 65
EN 65 123 456 7 89 0 VCR TV CABLE/DBS 3 3 2 Load cassettes Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR. 3 Select input mode on recording VCR Select the correct external input on the other VCR. ● On this VCR (when using this VCR as the recording VCR); L-1 or L-2 — when connecting t ...
-
JVC HM-DH30000U - page 66
66 EN 123 456 7 89 0 VCR TV CABLE/DBS MUL TI-BRAND REMOTE CONTROL This Remote can control some functions of remote controllable TVs listed below . W ithout setting, you can control a JVC TV . 1 T urn on the TV T urn on the TV using the Power button on the TV or its Remote. 2 Set remote operation mode Set the VCR/TV/CABLE/DBS selector to “TV”. 3 ...
-
JVC HM-DH30000U - page 67
EN 67 This Remote can control some functions of the cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. 1 T urn on the cable box T urn on the cable box using the Power button on the cable box or its Remote. 2 Set remote operation mode Set the VCR/TV/CA ...
-
JVC HM-DH30000U - page 68
68 EN MUL TI-BRAND REMOTE CONTROL (cont.) This Remote can control some functions of the DBS (Direct Broadcast Satellite) receivers listed below . 1 T urn on the DBS receiver T urn on the DBS receiver using the Power button on the DBS receiver or its Remote. 2 Set remote operation mode Set the VCR/TV/CABLE/DBS selector to “CABLE/ DBS”. 3 Enter D ...
-
JVC HM-DH30000U - page 69
EN 69 This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. Y ou can easily modify your VCR and the Remote to respond to B code si ...
-
JVC HM-DH30000U - page 70
70 EN TROUBLESHOOTING Before requesting service, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POSSIBLE CAUSE ● The AC power cord is disconnected. ● The VCR is in the timer recording standby mode with “AUTO TIMER? ...
-
JVC HM-DH30000U - page 71
EN 71 CORRECTIVE ACTION Set the clock and/or timer correctly . Press TIMER and check to make sure that ‰ appears on the front display panel. Re-perform the set-up procedures. Make sure you have compensated for guide channel and VCR or cable box channel number mismatches ( 墌 pg. 36). T imer programing cann ot be performed when timer recording is ...
-
JVC HM-DH30000U - page 72
72 EN TROUBLESHOOTING (cont.) VIDEO NA VIGA TION CORRECTIVE ACTION T ape information cannot be shown if it has not been recorded on this VCR. V ideo Navigation cannot work correctly on a tape if it has more than one tape number . If this happens, fast- forward the tape up to its end, eject it, and try it again. Check the remaining memory ( Z ␣ pg ...
-
JVC HM-DH30000U - page 73
EN 73 Err or Codes and Messages Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for the solution. 102 103 104 105 107 200 201 202 203 205 300 301 302 CODE MESSAGE DESCRIPTION REC PROHIBITED REC PROHIBITED CAN NOT DECODE VIDEO OR AUDIO USE SET T OP BOX OR HDTV TUNER INPUT BY S-VHS/VHS CHOOSE ...
-
JVC HM-DH30000U - page 74
74 EN RECORDING Q. When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen? A. This is normal. It reduces distortion at the pause and resume points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q. Can the VCR indefinitely ...
-
JVC HM-DH30000U - page 75
EN 75 INDEX List of terms This guide serves as a quick way to locate frequently used terms and on-screen display names. A Accidental erasure prevention 30 Audio Monitor 23 Auto Daylight Saving T ime 1 1 AUT O SP → EP TIMER 56 AUT O TIMER 56 Automatic tracking 23 A V COMPU-LINK 57 C Cable box setting Brand 16 Installing Controller 15 Output channe ...
-
JVC HM-DH30000U - page 76
76 EN INDEX (cont.) Front panel T o access covered connectors, pull and open the connector cover . 1 POWER button : Z pg. 21, 27 2 Remote sensor 3 TIMER ‰ button : Z pg. 35, 39, 40 4 REC LINK button : Z pg. 60 5 DIGIT AL 3-DNR button and lamp : Z pg. 25 6 Cassette loading slot 7 HS/STD/LS3/SP/EP button : Z pg. 27 8 RECORD ( ¶ ) button : Z pg. 26 ...
-
JVC HM-DH30000U - page 77
EN 77 Rear panel 1 AC power cord : Z pg. 7 2 Cooling fan ● This prevents the temperature from rising inside the VCR. Do not remove it. ● Install the VCR so as not to block the area around the cooling fan. 3 Component video output connectors : Z pg. 8 4 S VIDEO/AUDIO/VIDEO IN connectors (L-1): Z pg. 64 5 JLIP terminal : Z pg. 61 6 CABLE BOX Cont ...
-
JVC HM-DH30000U - page 78
78 EN Front display panel 1 Recording speed indicator : Z pg. 26 T imer programming indicator (“Pro” appears when PROG. or PROG. CHECK button is pressed. “Err” appears when the guide channel error occurs.) : Z pg. 40 2 Audio Monitor Indicators : Z pg. 23 3 Symbolic Mode Indicators : Z pg. 23 4 T imer mode indicator : Z pg. 35, 39 5 D-VHS in ...
-
JVC HM-DH30000U - page 79
EN 79 On-screen display 1 Brand name of the device connected to the i.LINK connector 2 Model name of the device connected to the i.LINK connector 3 Clock time 4 T ape speed indication 5 T ime counter (When “COUNT“ appears) : Z pg. 22, 28 T ape remaining time (When “REMAIN“ appears) : Z pg. 22, 28 6 T ape position indicator : Z pg. 22 7 Imag ...
-
JVC HM-DH30000U - page 80
80 EN Remote 1 VCR/TV/CABLE/DBS selector : Z pg. 66 – 69 2 TV/VCR button : Z pg. 66 3 A/B button : Z pg. 69 4 Number keys : Z pg. 26, 34 Character input buttons : Z pg. 48 5 DBS button : Z pg. 39 6 CANCEL button : Z pg. 34, 40 C. (Counter) RESET button : Z pg. 22, 28 7 ST OP +/– button : Z pg. 35, 38 8 ST ART +/– button : Z pg. 38 9 PROG. (Pr ...
-
JVC HM-DH30000U - page 81
EN 81 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption Power on : 55 W Power off : 18 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 435 mm x 105 mm x 383 mm (17-3/16" x 4-3/16" x 15-1/8") W eight : ...
-
JVC HM-DH30000U - page 82
82 EN HOW TO LOCA TE YOUR JVC SERVICE CENTER FOR SER VICING (Only in U.S.A.) JVC SERVICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF JVC AMERICAS CORP . ACCESSORIES Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the ...
-
JVC HM-DH30000U - page 83
EN 83 WARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y T O THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below . ("The War ...
-
JVC HM-DH30000U - page 84
HM-DH30000U COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD. Printed in Japan 0801 MNV * ID * VP U A TTENTION ● JVC EXPRESSL Y DISCLAIMS ALL W ARRANTIES, EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, CLAIMS OR LIABILITIES, DIRECT OR INDIRECT , ARISING FROM OR RELA TING TO THE USE OF THIS PRODUCT WITH ANY OTHER PRODUCT , DEVI ...
Do you have a question concerning JVC HM-DH30000U?
Use the form below
If you did not solve your problem by using a manual JVC HM-DH30000U, ask a question using the form below. If a user had a similar problem with JVC HM-DH30000U it is likely that he will want to share the way to solve it.