English dropdown-ico

Manual Fisher 1270

20 pages 0.15 mb
Download

Go to site of 20

Summary
  • Fisher 1270 - page 1

    1270 Operating Manual Special Anniversary Edition Metal Detector FISHER RESEARCH LABORATORY ...

  • Fisher 1270 - page 2

    CONTENTS About Your Detector ............................................................ pg. 1 Condensed Operating Instructions .................................. pg. 2 Setting Up ............................................................................... pg. 3 Controls & Functions .......................................................... ...

  • Fisher 1270 - page 3

    ABOUT YOUR FISHER 1270 The 1270 is a “motion” detector and was designed to offer you more versatility in a wide range of conditions: Highly mineralized soil, extremely trashy areas, and deep targets. By utilizing the various controls on the 1270, you will find more items that were unreachable until today. We at Fisher Research Laboratory always ...

  • Fisher 1270 - page 4

    2 Read this instruction manual thoroughly, practice often and you are in for some exciting treasure hunting. Drop us a line if you have any questions, comments or good finds to tell us about. In the meantime... HAPPY HUNTING! CONDENSED OPERATING INSTRUCTIONS We recommend that you first read this entire operating manual before taking your new 1270 o ...

  • Fisher 1270 - page 5

    SETTING UP Your new 1270 comes ready to assemble and use, but first review the steps below before proceeding. STEP 1. Unpack your 1270 carefully, and save the carton: It may come in handy on the rare occasion that you may need service. STEP 2. The coil is attached to the lower stem. Depress the spring lock button on the lower stem, and slip it into ...

  • Fisher 1270 - page 6

    STEP 6. When the stem length is properly adjusted, tighten the lower lock nut, and the coil wing nut. CAUTION: Never use a pliers or anything other than your hand to tighten either lock nut or wing nut. STEP 7. Disconnect the search-coil cable from the control housing and wrap it around the stem. A loose cable near the search coil may cause false s ...

  • Fisher 1270 - page 7

    CONTROLS & FUNCTIONS 5 1. ON / OFF VOLUME: ON /OFF VOLUME: Allows you turn on the 1270 and adjust the volume to a comfortable level. No need to have a special headphone with volume controls. Turning this control clockwise adjusts the volume. 2. NORMAL DISC: When operating in NORMAL DISC mode, this control gives you the ability to adjust the rej ...

  • Fisher 1270 - page 8

    6 7. IRON DISC TOGGLE: When this toggle switch is flipped ON, the 1270 will operate in IRON DISC mode. When operating in this mode, the IRON DISC control becomes ac- tive and the NORMAL DISC control will be ignored. The NORMAL DISC control can be momentarily re-engaged without changing the IRON DISC setting by pushing the MODE TRIGGER switch forwar ...

  • Fisher 1270 - page 9

    7 ALL METAL MODE Your 1270 gives you two ways to search in all-metal operation: (1) by set- ting your NORMAL DISC to 0, or (2) by turning on the ALL METAL GROUND ADJUST (rotate knob clockwise). When using the ALL-METAL GROUND ADJUST mode, only the VOLUME and the SENSITIVITY con- trols are still active: you have temporarily disabled the other contro ...

  • Fisher 1270 - page 10

    8 IRON DISC MODE metal. This may be tested quickly by pulling the trigger switch and sweep- ing over an area of about one square foot. If no signal is detected, release the trigger switch and raise the search coil off the ground, and lower it back down two or three times (also known as “bobbing”). If an audible sound is heard, turn the GROUND A ...

  • Fisher 1270 - page 11

    NORMAL DISC MODE When rejection of a full range of other non-ferrous trash is desired, the NORMAL DISC mode will be necessary. Make sure the ALL METAL GROUND ADJUST is OFF; that is, fully counterclockwise until it “clicks” into the “0” position. The IRON toggle switch must also be OFF. Adjust the NORMAL DISC knob to reject the unwanted “t ...

  • Fisher 1270 - page 12

    SEARCH TECHNIQUES Good searching techniques are every bit as important as having a good detector. 1. Adjust your SENSITIVITY control. Only experience will tell you how to set it in every situation. As general rule, turn up the sensitivity to achieve maximum depth and detection of small items. You will also get a wider search scan. Conditions may ar ...

  • Fisher 1270 - page 13

    SEARCH TECHNIQUES NO- MOTION PINPOINT 1. When the target “beep” is heard, make an “X” over the target, as de- scribed above, to determine the target area. 2. Move the coil away from the target area, and lower the coil to the ground. 3. Pull, and hold the MODE TRIGGER switch. 4. Raise the coil about 1/2 inch; move back across the target area ...

  • Fisher 1270 - page 14

    TARGET RECOVERY Once you have pinpointed a target, your objective is to recover it quickly and neatly, leaving virtually no trace of your excavation. There are many ways do this, and you will soon discover which method works best for you. REMEMBER: Always leave the ground in the same condition as you found it. NEVER leave exposed holes or damage to ...

  • Fisher 1270 - page 15

    A “False Signal” occurs when something sounds like a good target, but is not. Your 1270 does a great job of discriminating, but bad “targets” with similar electrical characteristics can fool it. Large pieces of trash or items very close to the search coil will occasionally sound “good”. Experience is the best teacher. As you accumulate ...

  • Fisher 1270 - page 16

    Your 1270 doesn’t require a lot of care, nor does it require regular “maintenance”. However, you should do a few things to keep your 1270 in peak operating condition. 1. Remove the batteries if you’re not going to be using your detector for a while. Batteries can leak, and cause severe damage. 2. Avoid extreme temperatures. When parked in t ...

  • Fisher 1270 - page 17

    Subject to improvement or modification without notice. SPECIFICATIONS 15 OUTPUTS BATTERIES BATTERY LIFE WEIGHT FREQUENCY LENGTH SEARCH COILS SEARCH MODES Low Battery Alert ...................................................... Automatic (LED) Built-i n Speak e r ......................................................... Y e s Stereo Headphone J ack ...

  • Fisher 1270 - page 18

    ...

  • Fisher 1270 - page 19

    ...

  • Fisher 1270 - page 20

    QUALITY Fisher detectors are renowned for their quality. Each detector is hand crafted in the USA with pride PERFORMANCE Treasure Hunters worldwide rely on Fisher. Our detectors are durable, dependable, and search deeper.. REPUTATION Fisher produced the first patented metal detector in 1931. For over 70 years, the Fisher logo has been a mark of exc ...

Manufacturer Fisher Category Metal Detector

Documents that we receive from a manufacturer of a Fisher 1270 can be divided into several groups. They are, among others:
- Fisher technical drawings
- 1270 manuals
- Fisher product data sheets
- information booklets
- or energy labels Fisher 1270
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fisher 1270.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fisher 1270, service manual, brief instructions and user manuals Fisher 1270. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fisher 1270.

Similar manuals

A complete manual for the device Fisher 1270, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fisher 1270 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fisher 1270.

A complete Fisher manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fisher 1270 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fisher 1270, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fisher 1270, that we can find in the current document
3. Tips how to use the basic functions of the device Fisher 1270 - which should help us in our first steps of using Fisher 1270
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fisher 1270
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fisher 1270 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fisher 1270?

Use the form below

If you did not solve your problem by using a manual Fisher 1270, ask a question using the form below. If a user had a similar problem with Fisher 1270 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)