English dropdown-ico

Manual Craftsman C944.511591

11 pages 0.5 mb
Download

Go to site of 11

Summary
  • Craftsman C944.511591 - page 1

    Instruction Manual I CRAFTSMAN°I BRUSHCU'I-FER A'I-FACHMENT Model No. O944.511591 NOT DESIGNED FOR USE WITH ELECTRIC POWERHEADS • Safety • Assembly • Operation • Maintenance • Parts List _ ANGER: Read and follow all Safety Rules and Operating Instructions before first use of this product. Sears Canada, Inc., Toronto, Ontario M5 ...

  • Craftsman C944.511591 - page 2

    Warranty Statement 2 Maintenance 10 Identification of Symbols 2 Service & Adjustments 10 Safety Rules 2 Storage 11 Assembly 5 Parts List Center Section Operation 7 Parts and Ordering Back Cover LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN ® BRUSHCUTTER ATTACHMENT For two (2) years from the date of purchase, Sears Canada, Inc., will repair or rep ...

  • Craftsman C944.511591 - page 3

    DANGER: Blade can thrust vio- lently away from material itdoes not cut. Blade thrust can cause amputa- tion of arms or legs. Keep people and animals 50 feet (15 meters) away. _ WARNING: Blade can throw ob- jects violently. You can be blinded or injured. Wear eye and leg protection. ALWAYS WEAR Eye Protection Thrown II Leg I I Guards _ Boots _WARNIN ...

  • Craftsman C944.511591 - page 4

    ken, or damaged in any other way before using the unit. • Maintain the unit according torecom- mended procedures. Keep the blade sharp. Never use flailing devices, wire, rope, string, etc. • Use only specified blade; make sure itis properly installed and securely fastened. • Never start engine with clutch shroud removed. The clutch can fly of ...

  • Craftsman C944.511591 - page 5

    CARTON CONTENTS Check carton contents against the fol- lowing list. Model 0944.511591 • Brushcutter attachment • Handlebar • Handlebar mounting bracket for 1" (2.5 cm) shaft • Handlebar mounting bracket for 7/8" (2.2 cm) shaft • Bracket cover (2) • Shoulder strap • Upper shoulder strap clamp • Lower shoulder strap clamp (w ...

  • Craftsman C944.511591 - page 6

    2. Position one of the bracket covers under the upper shaft and align the mounting bracket and the bracket cover screw holes. Insert two screws into the screw holes. 3. Secure the mounting bracket by tightening the screws with the hex wrench. 4. Locate the decal on the handlebar. This decal includes an arrow. Posi- tion the handlebar with the mount ...

  • Craftsman C944.511591 - page 7

    HARNESS ADJUSTMENT FOR BALANCE 6 inches below 4 - 12 waist inches above ground 30i KNOW YOUR BRUSHCUTTER ATTACHMENT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiar- ize yourself with the location of various controls and adjustments. Save this manual for ...

  • Craftsman C944.511591 - page 8

    Coupler Lower Attachment Upper Shaft LOOSEN TIGHTEN Knob 2= Press and hold the locking/release button. Locking/Release Button Lower Attachment 3= While securely holding the upper shaft, pull the attachment straight out of the coupler. INSTALLING ATTACHMENT 1= Remove the shaft cap from the at- tachment (if present) and discard. 2= Position locking ...

  • Craftsman C944.511591 - page 9

    • WHEN BLADE THRUST OCCURS - Blade Thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it is difficult to see the material being cut. By using the unit properly, the occurrence of blade thrust will be reduced and the opera- tor will be less likely to lose control. • Cut only grass, ...

  • Craftsman C944.511591 - page 10

    MAINTENANCE SCHEDULE _l WARNING: Always stop unit and disconnect spark plug wire before performing maintenance. CARE AND MAINTENANCE TASK Check for loose fasteners and parts Check for damaged or worn parts Inspect and clean unit and decals Check or replace blade GENERAL RECOMMEN DATIONS The warranty on this attachment does not cover items that have ...

  • Craftsman C944.511591 - page 11

    4, 5. Shield Remove both washers and the blade from the blade shaft. Leave the dust cup on the gearbox. Install new blade and retaining washer onto the threaded shaft ex- tending from the gearbox (blade must be between the dust cup and the retaining washer). Make sure the raised part of the retaining washer is facing the gearbox, and the raised are ...

Manufacturer Craftsman Category Lawn Mower Accessory

Documents that we receive from a manufacturer of a Craftsman C944.511591 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- C944.511591 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman C944.511591
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman C944.511591.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman C944.511591, service manual, brief instructions and user manuals Craftsman C944.511591. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman C944.511591.

Similar manuals

A complete manual for the device Craftsman C944.511591, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman C944.511591 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman C944.511591.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman C944.511591 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman C944.511591, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman C944.511591, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman C944.511591 - which should help us in our first steps of using Craftsman C944.511591
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman C944.511591
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman C944.511591 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman C944.511591?

Use the form below

If you did not solve your problem by using a manual Craftsman C944.511591, ask a question using the form below. If a user had a similar problem with Craftsman C944.511591 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)