English dropdown-ico

Manual Orion 23LEDE

39 pages Not applicable
Download

Go to site of 39

Summary
  • Orion 23LEDE - page 1

    23-INCH WIDE TFT-LED MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference. ...

  • Orion 23LEDE - page 2

    ...

  • Orion 23LEDE - page 3

    SAFETY INSTRUCTION ………………………………………………………….…… 2 ~ 3 CAUTIONS……………………………………………………………….......... ................ 4 FCC RF INTERFERENCE STATEMENT ……………………………..... .................. 5 INSTALLATION ………………………………? ...

  • Orion 23LEDE - page 4

    Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in ac cordance with the manufacturer ’s instructions. 8. Do not install near any heat sour ...

  • Orion 23LEDE - page 5

    - The apparatus shall not be exposed to dripping or splashing and that no objects f illed with liquids, such as vases, shall be placed no the apparatus. 14 Minimu m distances(e.g. 10cm) around the appa ratus for sufficient ventilation. “W ARNING – T o reduce the risk of fire or electric sh ock, do not expose the app aratus to rain or moisture.? ...

  • Orion 23LEDE - page 6

    CAUTION The power supply cord is used as the main disc onnect device, ensure that the socket-outlet is located/installed near the equipm ent and is easily accessible. ATTENTION N Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du ma tériel et être facile d`acc? ...

  • Orion 23LEDE - page 7

    NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installe ...

  • Orion 23LEDE - page 8

    Before setting up the monitor , ensure that the power to the monitor and other att ached devices are turned off. ※ Notice: Stand & Screws are optional A. Connecting the stand 1. Place the monitor with its front facing downward on a sof t cloth. 2. Assemble the S tand Base into the S tand B ody in the correct dire ction using the included scre ...

  • Orion 23LEDE - page 9

    1. Rear Connection 1. PC STEROE IN. 2. VGA. 3. DVI. 4. HDMI. 5. DC 12V IN. - 7 - 1 2 3 4 5 ...

  • Orion 23LEDE - page 10

    2. Bottom Key Control 1. SOURCE/ Selects VGA, DVI and HDMI inputs. Selects an option in the OSD. 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3, 4. AUTO/ ▼ & ▲ Moves another option in the OSD. The ▲ button converts the aspect ratio as 16:9 or 4:3. The AUTO/ ▼ button is auto adjustment function in the VGA ...

  • Orion 23LEDE - page 11

    OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲ / ▼ buttons to select the desired option. The selected option is yellow color. 3. Press the SOURCE/ button twice to enter the sub-menu and adjust the ...

  • Orion 23LEDE - page 12

    2. Positioning Option Function Value Exit Returns to previous menu. Horizontal Adjusts the horizontally picture position. 0 ~ 100. Vertical Adjusts the vertically picture position. 0 ~ 100. ※ Unavailable in DVI & HDMI inputs. - 10 - ...

  • Orion 23LEDE - page 13

    3. Image Settings Option Function Value Exit Returns to previous menu. Auto Adjust Auto geometry adjustment. Pixel Clock Adjusts the vertical noise of screen image. 0 ~ 100. Phase Adjusts the number of horizontal picture elements. 0 ~ 100. ※ Unavailable in DVI & HDMI inputs. - 11 - ...

  • Orion 23LEDE - page 14

    4. Color Settings Option Function Value Color Adjust Adjusts red, green & blue colors of the picture. 0 ~ 100. Color Temp Adjusts color temperature of the picture. sRGB Preset, 9300K Preset, 6500K Preset, User Preset 1) . 1) User Preset Option Function Value Exit Returns to previous menu. Red, Green, Blue Adjusts red, green & blue colors of ...

  • Orion 23LEDE - page 15

    5. OSD Settings Option Function Value Exit Returns to previous menu. Horizontal Position Moves the horizontally OSD position. 0 ~ 100. Vertical Position Moves the vertically OSD position. 0 ~ 100. OSD Hold Timer Adjusts the display time of OSD. 0 ~ 100. OSD Lock Displays the menu of OSD settings only. No / Yes - 13 - ...

  • Orion 23LEDE - page 16

    6. Brightness / Contrast Option Function Value Exit Returns to previous menu. Brightness Adjusts brightness of the screen. 0 ~ 100. Contrast Adjusts intensity of the image. 0 ~ 100. - 14 - ...

  • Orion 23LEDE - page 17

    7. Language Option Function Value Exit Returns to previous menu. Language Sets the language of OSD menu. English, Spanish, French, Deutsch & Korean. - 15 - ...

  • Orion 23LEDE - page 18

    8. Misc. Option Function Value Exit Returns to previous menu. Initialize Resets the monitor settings to the factory default. Aspect Ratio Converts the aspect ratio. 16:9 & 4:3 - 16 - ...

  • Orion 23LEDE - page 19

    W all mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 st andard wall mount (not included in the delivery). ※ Attention! Y ou must use four M4x10 screws to assemble this monitor and the wall mount bracket. - 17 - 100 100 M4x10 screws ...

  • Orion 23LEDE - page 20

    P ▶ in Assignments Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ Accessories 1. Power cord. 2. Power adaptor 3. User manual. 4. VGA(RGB-PC) cable. 5. Stand & FS4x10 screws 3E ...

  • Orion 23LEDE - page 21

    This monitor features a pow er management system to “power down” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card perfo rms this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identify ...

  • Orion 23LEDE - page 22

    23” LCD Type 23 ˝ Diagonal AM-TFT(Acti ve-Matrix) Pixel pitch(mm): 0.2655(H) x 0.2655(V) Brightness: 250cd/m ² (Typical) Contrast ratio: 1000:1(Typical) Viewing angle: 160°/160°(H/V) Response time: 5ms(Typical) Resolution (H x V) 1920X1080@60Hz Frequency Horizontal: 31~80kHz Vertical: 56~75Hz Input Signal Digital Visual Interface (DVI 1.0 &am ...

  • Orion 23LEDE - page 23

    WEEE Symbols - 21 - Correct Disposal of This Product (Waste Electrical & El ectronic Equipment) (Applicable in the Euro pean Union and other European countries with se parate collection systems) This marking shown on the product or its liter ature, indicates that it should not be disposed with other household was tes at the end of its working l ...

  • Orion 23LEDE - page 24

    MEMO ...

  • Orion 23LEDE - page 25

    MEMO ...

  • Orion 23LEDE - page 26

    MEMO ...

  • Orion 23LEDE - page 27

    ...

  • Orion 23LEDE - page 28

    P/N : L39ME0271 Rev.1 ...

  • Orion 23LEDE - page 29

    Français-27 Français SURBALA Y AGE Entrées HDMI, DVD/HD, SCART , VIDEO1, VIDEO2, S-VIDEO uniquement Certains formats vidéo peuvent nécessiter différents modes de numérisation pour un meilleur affi chage de l’image. MARCHE MARCHE La taille de l’image est supérieure à la taille pouvant être affi chée. Le bord de l’image apparaît c ...

  • Orion 23LEDE - page 30

    Français-28 REMARQUE 1 : CRÉA TION D’UN CALENDRIER La fonction Calendrier permet d’allumer et d’éteindre l’écran à des heures différentes. Il est possible de programmer jusqu’à sept calendriers différents. Pour programmer le calendrier : 1. Entrez dans le menu CALENDRIER. Mettez en surbrillance la fonction P ARAM. CALENDRIER en ut ...

  • Orion 23LEDE - page 31

    ...

  • Orion 23LEDE - page 32

    Français-30 2. Défi nition de l’IDENT . DU MONITEUR et du mode COMMANDE REGISTRE. Pour un bon fonctionnement, l’IDENT . DU MONITEUR doit être défi ni dans le menu OSD de chaque moniteur de la chaîne. L ’ID Moniteur peut être défi ni dans le menu « AFFICHAGES MUL TIPLES » de l’OSD. Le numéro de l’IDENT . DU MONITEUR peut être ...

  • Orion 23LEDE - page 33

    ...

  • Orion 23LEDE - page 34

    Français-32 2) Diagramme de la commande de contrôle Pour les autres commandes, veuillez vous référer au fi chier « External_Control.pdf » contenu sur le CD-ROM. Fonction (Ident. du moniteur = 1) Code Position MARCHE 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d Position ARRÊT 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 ...

  • Orion 23LEDE - page 35

    Français-33 Français Connexion à un réseau En utilisant un câble LAN, vous pouvez indiquer les paramètres réseau et les paramètres d’alertes par e-mail grâce à une fonction de serveur HTTP . REMARQUE : Lorsque vous utilisez cette fonction, le paramètre COMMANDE EXTERNE doit être défi ni sur « LAN » (V oir page 24). Pour utiliser u ...

  • Orion 23LEDE - page 36

    Français-34 Préparation av ant l’utilisation Connectez le moniteur à un câble LAN disponible en vente avant de commencer à effectuer des opérations dans le navigateur . Il est possible que les opérations dans le navigateur utilisant un serveur proxy ne soient pas permises en fonction du type de serveur proxy et des paramètres. Bien que le ...

  • Orion 23LEDE - page 37

    ...

  • Orion 23LEDE - page 38

    Français-36 Liste de messages d’erreur et d’alertes Numéro d’erreur * Code erreur Message de l’alerte par e-mail Explication Mesures 70h ~ 7Fh The monitor ’ s power supply is not functioning normally . (L’alimentation du moniteur ne fonctionne pas normalement.) Alimentation anormale en mode de veille Contactez votre fournisseur . 80h ...

  • Orion 23LEDE - page 39

    Français-37 Français Encombrement réduit : Offre la solution idéale pour les environnements avec une qualité d’image supérieure. Systèmes de contrôle des couleurs : Permet de régler les couleurs à l’écran et de personnaliser la précision des couleurs de votre moniteur selon diverses normes. OmniColor : Combine un contrôle des coule ...

Manufacturer Orion Category Monitor

Documents that we receive from a manufacturer of a Orion 23LEDE can be divided into several groups. They are, among others:
- Orion technical drawings
- 23LEDE manuals
- Orion product data sheets
- information booklets
- or energy labels Orion 23LEDE
All of them are important, but the most important information from the point of view of use of the device are in the user manual Orion 23LEDE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Orion 23LEDE, service manual, brief instructions and user manuals Orion 23LEDE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Orion 23LEDE.

Similar manuals

A complete manual for the device Orion 23LEDE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Orion 23LEDE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Orion 23LEDE.

A complete Orion manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Orion 23LEDE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Orion 23LEDE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Orion 23LEDE, that we can find in the current document
3. Tips how to use the basic functions of the device Orion 23LEDE - which should help us in our first steps of using Orion 23LEDE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Orion 23LEDE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Orion 23LEDE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Orion 23LEDE?

Use the form below

If you did not solve your problem by using a manual Orion 23LEDE, ask a question using the form below. If a user had a similar problem with Orion 23LEDE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)