Manual Cisco Systems PA-2FE-TX

82 pages 3 mb
Download

Go to site of 82

Summary
  • Cisco Systems PA-2FE-TX - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 P A -2FE-TX and P A -2FE-FX T w o-P or t F ast Ethernet P or t Adapte r Installation and Conf iguration Pr odu ct Number: P A-2FE-TX=, P A-2FE-FX= Platforms Suppor ted: Cisco 71 ...

  • Cisco Systems PA-2FE-TX - page 2

    THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USER S MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICAT IO ...

  • Cisco Systems PA-2FE-TX - page 3

    iii PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 CONTENTS Preface vii Document Revision History vii Objectives viii Organization viii Related Documentation viii Obtaining Documentation, Obtaining Support, and Security Guid eline s xi CHAPTER 1 Overview 1-1 Port Adapter Overview 1-1 Fast Et ...

  • Cisco Systems PA-2FE-TX - page 4

    Contents iv PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 CHAPTER 2 Preparing for Installation 2-1 Required Tools and Equipment 2-1 Software and Hardware Requirements 2-2 Checking Hardware and Software Com patibility 2-2 Safety Guidelines 2-3 Safety Warnings 2-3 Warning Definition 2-3 Elect ...

  • Cisco Systems PA-2FE-TX - page 5

    Contents v PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Using the show version or show hardware Comman ds 4-11 Using the show diag Command 4-14 Using the show interfaces Command 4-18 Using the ping Command to Verify Network Connectivity 4-21 ...

  • Cisco Systems PA-2FE-TX - page 6

    Contents vi PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 ...

  • Cisco Systems PA-2FE-TX - page 7

    vii PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Preface This preface describes th e objecti ves and or ganization of this document and e xplains ho w to f ind additional informati on on related products and servi ces. This preface contains the follo wing sections: • Document Re vision H ...

  • Cisco Systems PA-2FE-TX - page 8

    viii PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Preface Objectives Objectives This document describes ho w to i nstall and conf igure the P A-2FE-TX and P A-2FE-FX two-port F ast Ethernet port adapters, hereafter referred to as th e P A-2FE, which are used in the follo wing platforms: ? ...

  • Cisco Systems PA-2FE-TX - page 9

    ix PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Preface Related Documentation • Cisco 7100 s eries routers : – For an online directory to quickly access document s for Cisco 7100 series rout ers, refer to the Cisco 7100 S eries Docu mentation roadmap at the foll owing URL: http://www . ...

  • Cisco Systems PA-2FE-TX - page 10

    x PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Preface Related Documentation • Cisco 7301 rout er: – For an onl ine directory to quickly access docu ments for the Cisco 7301 router , refer to the Cisco 7301 Internet Router Document ation Roadmap at the f ollow ing URL: http://www .cisc ...

  • Cisco Systems PA-2FE-TX - page 11

    xi PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Preface Obtaining Do cumentation, Obtainin g Support, and Security Guideline s • Fast Ethernet Port Adapter Family (P A-FE and P A-2FE) Datasheet http://www .cisco.com/en/US/products/hw/ modules/ps2033/products_d ata_sheet09186a0 080091c9 2 ...

  • Cisco Systems PA-2FE-TX - page 12

    xii PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Preface Obtaining Documentation, Obtaining Support, and Security Guide lines ...

  • Cisco Systems PA-2FE-TX - page 13

    CH A P T E R 1-1 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 1 Overview This chapter describes the P A-2FE port ad apter and contains the following sections: • Port Adapter Overview , page 1-1 • Fast Ethernet Overvie w , page 1-2 • IEEE 802.3u 100B ASE-T Specifications, page 1- 2 ...

  • Cisco Systems PA-2FE-TX - page 14

    1-2 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Fast Ethernet Over view Fast Ethernet Overview The term Etherne t is commonly used for all carrier sense multiple access collisio n detect (CSMA/CD) LANs that generally conform to Ethernet specif ications, including F ast ...

  • Cisco Systems PA-2FE-TX - page 15

    1-3 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview IEEE 802.3u 100BASE -T Specifications Figure 1 -3 Maximum Segment and Networ k Lengths—1 00BASE--FX and 1 0 0BASE-TX Maximum netw ork length (half-duple x, one repeater) 4 200 m 272 m Data rate 100 Mbps 100 Mbps Signal ...

  • Cisco Systems PA-2FE-TX - page 16

    1-4 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview LEDs Note P A-2FE-FX uses 62.5/125-micron multimode f iber with an SC con nector . LEDs The P A-2FE has sev en LEDS; an EN ABLED LED, and LINK, TRANSMIT , and RECEIVE LEDs for each port. The LEDs are shown in Figure 1-4 . ...

  • Cisco Systems PA-2FE-TX - page 17

    1-5 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Receptacles, Ca bles, a nd Pinouts Figure 1-5 sho ws the RJ-45 cab le connectors. Cisco does not supply Cat egory 5 UTP RJ- 45 cables; they are av ailable from a commercial supplier . Ta b l e 1 - 3 lists the pinout s an ...

  • Cisco Systems PA-2FE-TX - page 18

    1-6 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Network Manage ment Figur e 1 -7 Cr ossov er Cable Pinout—P A -2FE-TX RJ- 45 Connections Betw een Hubs and Repeaters Figure 1-8 sho ws the duple x SC connector (one requir ed for bot h transmit an d recei v e), and Figur ...

  • Cisco Systems PA-2FE-TX - page 19

    1-7 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Port Adapter Slot Locations on the Supported Platforms Port Adapter Slot Locations on the Supported Platforms This section discusses port adapte r slot locations on the suppor ted platforms. The ill ustrations that follo ...

  • Cisco Systems PA-2FE-TX - page 20

    1-8 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Port Adapter Slot Lo cations on the Supported Platforms Figur e 1 -1 1 P or t Adapt er Slots in the Cisco 7140 Ser ies Rout er Cisco 7200 Series Routers and Cisco 7200 VXR Routers Slot Numbering Cisco 7202 routers ha ve tw ...

  • Cisco Systems PA-2FE-TX - page 21

    1-9 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Port Adapter Slot Locations on the Supported Platforms Cisco uBR7200 Series Router Slot Numbering The Cisco uBR7223 router has one port adapter sl ot (slot 1). Slot 0 is alw ays reserved for the I/O controller—if prese ...

  • Cisco Systems PA-2FE-TX - page 22

    1-10 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7201 Router Slot Numbering Figure 1-14 sho ws the fro nt view of a Cisco 7201 rout er with a port adapt er installed. There is only one port adapter slot (slot ...

  • Cisco Systems PA-2FE-TX - page 23

    1-11 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7304 PCI Port Adapter Carrier Card Slot Numbering The Cisco 7304 PCI port adapter carrier card i nstalls into Cisco 7304 router module slots 2 through 5. Figu ...

  • Cisco Systems PA-2FE-TX - page 24

    1-12 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7401ASR Router Slot Numbering Figure 1-18 sho w s the front vie w of a Cisco 7401ASR rou ter with a port adapter installed. There is onl y one port adapter slo ...

  • Cisco Systems PA-2FE-TX - page 25

    1-13 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7505 routers ha ve four slot s for port adapters, and one slot for a Ro ute Switch Processor (RSP). The slots are numbered from bottom to top. Y ou can place ...

  • Cisco Systems PA-2FE-TX - page 26

    1-14 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7507 routers ha ve f iv e slots for port adapters, and two slots for RSPs. The slots are numbered from left to right. Y o u can place the port adapters in any ...

  • Cisco Systems PA-2FE-TX - page 27

    1-15 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7513 routers ha ve el ev en slots f or port adapters, and tw o slots for RSPs. The slots are nu mbered from left to right. Y ou can place th e port adapters i ...

  • Cisco Systems PA-2FE-TX - page 28

    1-16 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Identifying In terface Addresses Identifying Interface Addresses The follo wing sections describe the interface addre ss formats for the P A-2FE in supported platforms. Interface addresses specify the actual physical lo c ...

  • Cisco Systems PA-2FE-TX - page 29

    1-17 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Identifying Interface Addresse s Note In Cisco 7200 series routers, Cisco 7 200 VXR router s, and Cisco uBR7200 seri es routers, port adapter slot 0 is reserved for the F ast Ethernet port on the I/O controller , if pre ...

  • Cisco Systems PA-2FE-TX - page 30

    1-18 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Identifying In terface Addresses Cisco uBR7200 Series Routers Interface Addresses In the Cisco uBR7223 router , on ly one slot ac cepts port adapters and it is numbered slot 1. In the Cisco uB R7246 route r and Cisco uBR7 ...

  • Cisco Systems PA-2FE-TX - page 31

    1-19 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 1 Overview Identifying Interface Addresse s Cisco 7500 Series Routers VIP Interface Addresses In Cisco 7500 series routers, port adapters are installed on a versatil e interface processor (VIP), which installs in interface pro ces ...

  • Cisco Systems PA-2FE-TX - page 32

    1-20 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 1 Overview Identifying In terface Addresses ...

  • Cisco Systems PA-2FE-TX - page 33

    CH A P T E R 2-1 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 2 Preparing for Installation This chapter describes the genera l eq uipment, safety , and site preparat ion requirements for i nstalling the P A-2FE. This chapte r contains the following sections: • Required T ools and Equip ...

  • Cisco Systems PA-2FE-TX - page 34

    2-2 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 2 Preparing for Installation Software and Har dware Requirements Software and Hardware Requirements Ta b l e 2 - 1 lists the recommended minimum Cisco IOS software release required to use the P A-2FE in supported router or switch pla ...

  • Cisco Systems PA-2FE-TX - page 35

    2-3 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 2 Pre paring for Installation Safety Guidelines Choose a product f amily or enter a specif ic product nu mber to search for the minimum supported software release needed for your hardw are. Safety Guidelines This section pro vides ...

  • Cisco Systems PA-2FE-TX - page 36

    2-4 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 2 Preparing for Installation Safety Guidelines Attention IMPORT ANTES INFORMA TIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une situation pouvant entraîner des blessures ou des do mm ...

  • Cisco Systems PA-2FE-TX - page 37

    2-5 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 2 Pre paring for Installation Safety Guidelines ¡Advertencia! INSTRUCCIONES IMPORT ANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, conside re ...

  • Cisco Systems PA-2FE-TX - page 38

    2-6 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 2 Preparing for Installation Safety Guidelines Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V oc ê se encontra em uma situação em que há risco de le sões corporais. Antes de trabalhar c ...

  • Cisco Systems PA-2FE-TX - page 39

    2-7 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 2 Pre paring for Installation Safety Guidelines ...

  • Cisco Systems PA-2FE-TX - page 40

    2-8 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 2 Preparing for Installation Safety Guidelines Electrical Equipment Guidelines Follo w these basic guidelines when working with any electrical equipment: • Before begin ning any procedures requ iring access to the chassis interior ...

  • Cisco Systems PA-2FE-TX - page 41

    2-9 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 2 Pre paring for Installation Safety Guidelines Telephone Wiring Guidelines Use the follo wing guidelines when working with an y equipment that is connected to telephone wiring or to other network cabl ing: • Nev er install telep ...

  • Cisco Systems PA-2FE-TX - page 42

    2-10 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 2 Preparing for Installation FCC Class A Compliance FCC Class A Compliance This equipment has been test ed and found to comply with the limits for a Class A digital de vice, pursuant to part 15 of t he FCC rules. These limits ar e d ...

  • Cisco Systems PA-2FE-TX - page 43

    CH A P T E R 3-1 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 3 Removing and Installing Port Adapters This chapter describes ho w to remo ve the P A-2FE port adapter from supported platfor ms and also ho w to install a ne w or replacement port adapter . This chapter contains the followin ...

  • Cisco Systems PA-2FE-TX - page 44

    3-2 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Online Insertio n and Removal Figur e 3-1 Handling a P ort A dapter Online Insertion and Removal Se veral plat forms support online in sertion and remo va l (OIR) of port adapters; theref ore, ...

  • Cisco Systems PA-2FE-TX - page 45

    3-3 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Warnings and Cau tions Each P A-2FE has a b u s connector th at connects it to th e router . The connector has a set of tiered pins in three lengths that send specific sign als to the system ...

  • Cisco Systems PA-2FE-TX - page 46

    3-4 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Port Adapter Removal and Installation Port Adapter Removal and Installation In this section, the illustrations that fol low gi v e step-b y-step instructi ons on ho w to remov e and install po ...

  • Cisco Systems PA-2FE-TX - page 47

    3-5 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Port Adapter Remo val and Installation Cisco 7100 Series—Removing and Installing a Port Adapter SLOT 0 SLOT 1 0 2 FE 0 / 0 FE AUX 7120 - AE3 RX TX E3 RX EN CEL CAR ALM 5 I CONS ACT 0 / 1 A ...

  • Cisco Systems PA-2FE-TX - page 48

    3-6 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Port Adapter Removal and Installation Cisco 7200 Series Routers and Cisco 7200 VXR Routers—Removing and Installing a Port Adapter Step 1 To remove the port adapter, place the port adapter le ...

  • Cisco Systems PA-2FE-TX - page 49

    3-7 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Port Adapter Remo val and Installation Cisco uBR7200 Series Routers—Removing a Port Adapter P ort adapter lev er (lock ed position) Port adapters P ort adapter lev er (unlock ed position) ...

  • Cisco Systems PA-2FE-TX - page 50

    3-8 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Port Adapter Removal and Installation Cisco uBR7200 Series Routers—Installing a Port Adapter Step 1 To insert the port adapter, carefully align the port adapter carrier between the upper and ...

  • Cisco Systems PA-2FE-TX - page 51

    3-9 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Port Adapter Remo val and Installation Cisco 7201 Router—Removing and Installing a Port Adapter 170902 A L A R M R J4 5 E N L IN K T X R X G B IC G IG A B IT E T H E R N ET 0 /2 R J4 5 E N ...

  • Cisco Systems PA-2FE-TX - page 52

    3-10 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Port Adapter Removal and Installation Cisco 7301 Router—Removing and Installing a Port Adapter 84129 A L A R M R J 4 5 E N L IN K T X R X G B IC G IG A B IT E T H E R N E T 0/2 R J 4 5 E N ...

  • Cisco Systems PA-2FE-TX - page 53

    3-11 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Port Adapter Remo val and Installation Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter Y ou can install one single-width port adap ter in a Ci sco 7304 PCI ...

  • Cisco Systems PA-2FE-TX - page 54

    3-12 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Port Adapter Removal and Installation Figure 3-2 illu strates how t o remov e and install a port adapter in a Cisco 7304 PCI port adapter carr ier card. Figure 3-2 Ci sc o 73 04 P CI Port Ad ...

  • Cisco Systems PA-2FE-TX - page 55

    3-13 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Port Adapter Remo val and Installation Cisco 7401ASR Router—Removing and Installing a Port Adapter Cisco 7500 Series Router VIP—Removing and Installing a Port Adapter Y ou must remo ve ...

  • Cisco Systems PA-2FE-TX - page 56

    3-14 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Port Adapter Removal and Installation Removing and Installing a VIP Carrier Ca rd in the Cisco 7500 Series Router 39395 E JE C T S LO T 0 S LO T 1 N O R M A L C P U H A LT R E S E T A U X . C ...

  • Cisco Systems PA-2FE-TX - page 57

    3-15 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Port Adapter Remo val and Installation Removing and Installing the Port A dapter in the VIP Carrier Card Note: You must first remove the VIP from the chassis before removing a port adapter ...

  • Cisco Systems PA-2FE-TX - page 58

    3-16 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Connecting a PA-2FE RJ-45 or SC Cable Connecting a PA-2FE RJ-45 or SC Cable T o continue your P A-2FE port adapter inst allation, you must install the port adapter’ s interface cables. The ...

  • Cisco Systems PA-2FE-TX - page 59

    3-17 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 3 Removing and Installin g Port Adapters Connecting a PA-2FE RJ-45 or SC Cable Figure 3-4 Connectin g P A -2FE-FX SC Cables—Ho r iz ontal Or ientation 46456 R X 1 L IN K 1 T X 1 CLASS 1 LED PRODUCT PRODUKT MIT KLASSE 1 LED PRODU ...

  • Cisco Systems PA-2FE-TX - page 60

    3-18 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 3 Removing an d Installing Port Adapters Connecting a PA-2FE RJ-45 or SC Cable ...

  • Cisco Systems PA-2FE-TX - page 61

    CH A P T E R 4-1 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 4 Configuring the PA-2FE T o continue your P A-2FE port adapter installation, you must con f igur e the F ast Ethernet interfaces. The instructions th at follow apply to all supported platforms. Mi nor dif fe rences between th ...

  • Cisco Systems PA-2FE-TX - page 62

    4-2 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Configuring the Interfaces After you verif y that the ne w P A-2F E is inst alled correct ly (the ENABLED LED goes on), use the pri vileged-l ev el conf igure command to conf igure ...

  • Cisco Systems PA-2FE-TX - page 63

    4-3 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Step 3 Shut do wn interfaces b y entering the interface fastether net command (followed by the interface address of the interface), and then enter the shutdown command. Ta b l e 4 ...

  • Cisco Systems PA-2FE-TX - page 64

    4-4 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Note If you need to shut do wn addition al interfaces, en ter the interface fas tetherne t command follo wed by the interface address (example: 1/1/1 ) of the interf ace. Use the no ...

  • Cisco Systems PA-2FE-TX - page 65

    4-5 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Ta b l e 4 - 2 provides examples of the sho w interfaces fastethernet command for the supported platforms. T able 4-2 Ex amples of the sho w int erfaces f ast ethe rnet Command fo ...

  • Cisco Systems PA-2FE-TX - page 66

    4-6 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Step 6 Re-enable interf aces by doing the f ollo wing: a. Repeat Step 3 to re-enable an interface. Substitute the no shutdown command for the shutdo wn command. b. Repeat Step 4 to ...

  • Cisco Systems PA-2FE-TX - page 67

    4-7 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Performing a Basic Interface Configuration Follo wing ar e instruct ions for a basic conf iguration, which include enabling an interface and specifying IP routing. Y ou might also ...

  • Cisco Systems PA-2FE-TX - page 68

    4-8 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Configuring the Interfaces Note The P A-2FE is automatically conf igured with 1 00-Mbps interfaces. If Cisco IOS soft ware detects t hat the P A-2FE is connected to a 10-Mbps inte rface, the P A -2FE will aut ...

  • Cisco Systems PA-2FE-TX - page 69

    4-9 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Checking the Configuration After configuring the ne w interface, use the show comman ds to display the status of the n ew in terface or all interfaces, and use the ping command to ...

  • Cisco Systems PA-2FE-TX - page 70

    4-10 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration If an interf ace is shut do wn and you conf igured it as up , or if the displays indicate that the hardware is not functioning properly , ensure that the interface is properly conn ...

  • Cisco Systems PA-2FE-TX - page 71

    4-11 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Using the show version or show hardware Commands Display the configurat ion of the system hardware , the number of each interface type installed, the Cisco IOS software version, ...

  • Cisco Systems PA-2FE-TX - page 72

    4-12 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Cisco 7200 Series Routers and Cisco 7200 VXR Routers—Example Output of the show version Command Follo wing is an e xample of the show version command from a Cisco 7200 series rou ...

  • Cisco Systems PA-2FE-TX - page 73

    4-13 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Cisco 7201 (c7201) processor (revision A) with 917504K/65536K bytes of memory. Processor board ID 2222222222222 MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2 1 slot midplane, ...

  • Cisco Systems PA-2FE-TX - page 74

    4-14 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Router uptime is 5 minutes System returned to ROM by reload System image file is "tftp://172.168.0.0" cisco RSP4 (R5000) processor with 65536K/2072K bytes of memory. R500 ...

  • Cisco Systems PA-2FE-TX - page 75

    4-15 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Cisco 7100 Series Routers—Example Output of the show diag Co mmand Follo wing is an e xample of the show diag command from a Cisco 71 40 series router: Router# show diag 4 Slot ...

  • Cisco Systems PA-2FE-TX - page 76

    4-16 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration The follo wing e xample sho ws information about the P A-2FE-FX instal led in port adapter slot 3: Router# show diag 3 Slot 3: Dual Port FastEthernet (MMF) Port adapter, 2 ports Po ...

  • Cisco Systems PA-2FE-TX - page 77

    4-17 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Cisco 7401ASR Routers—Example Ou tput of the show diag Command Follo wing is an e xample of the show diag command from a Cisco 74 01ASR router: Router# show diag 1 Slot 1: Dual ...

  • Cisco Systems PA-2FE-TX - page 78

    4-18 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Dual Port Fast Ethernet (MMF), 2 ports EEPROM format version 4 HW rev 1.00, Board revision UNKNOWN Serial number:MIC04291ZUY Part number:73-5419-01 Note For complete command descr ...

  • Cisco Systems PA-2FE-TX - page 79

    4-19 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration 26 packets input, 4922 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble co ...

  • Cisco Systems PA-2FE-TX - page 80

    4-20 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Cisco 7201 Router—Example Output of the show interfaces Command Follo wing is an e xample of the show interfaces command from a Ci sco 7201 router: Router# show interfaces Gigabi ...

  • Cisco Systems PA-2FE-TX - page 81

    4-21 PA-2FE-TX and PA-2FE-FX Two-Po rt Fast Etherne t Port Adapte r Installa ti on and Configuration OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration 1 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out VIP in Cisco 7500 Series Routers—Example Output o f the show in terfaces Command Follo wing ...

  • Cisco Systems PA-2FE-TX - page 82

    4-22 PA-2FE-TX and PA-2FE-FX Two-Port Fast E therne t Port Adapter Installation and Configura tion OL-3474-07 Chapter 4 Configuring the PA-2FE Checking the Configuration Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms Router# ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems PA-2FE-TX can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- PA-2FE-TX manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems PA-2FE-TX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems PA-2FE-TX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems PA-2FE-TX, service manual, brief instructions and user manuals Cisco Systems PA-2FE-TX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems PA-2FE-TX.

A complete manual for the device Cisco Systems PA-2FE-TX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems PA-2FE-TX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems PA-2FE-TX.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems PA-2FE-TX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems PA-2FE-TX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems PA-2FE-TX, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems PA-2FE-TX - which should help us in our first steps of using Cisco Systems PA-2FE-TX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems PA-2FE-TX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems PA-2FE-TX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems PA-2FE-TX?

Use the form below

If you did not solve your problem by using a manual Cisco Systems PA-2FE-TX, ask a question using the form below. If a user had a similar problem with Cisco Systems PA-2FE-TX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)