English dropdown-ico

Manual Cisco Systems CX-TRIP4

28 pages 0.69 mb
Download

Go to site of 28

Summary
  • Cisco Systems CX-TRIP4 - page 1

    1 Customer Order Number: Copyright © 1995 Cisco Systems, Inc. All rights reser ved. Documentation P ar t Number: T ok en Ring Interf ace Processor (TRIP) Installation and Configuration Product Number s: CX-TRIP2 and CX-TRIP4 This document provides instructions for installing the T oken Ring interface processor (TRIP) in your Cisco 7000 and Cisco ...

  • Cisco Systems CX-TRIP4 - page 2

    2 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Product Description Pr oduct Description This section contains a detailed description of the T oken Ring interface processor (TRIP). The TRIP , shown in Figure 1, provides tw o or four T oken Ring ports for interconnection with IEEE 802.5 and IBM T oken Ring media. The TRIP ...

  • Cisco Systems CX-TRIP4 - page 3

    Token Ring Interface Processor (TRIP) Installation and Configuration 3 Product Description When a T oken Ring interface is configured by using software commands, three LEDs for each port indicate the follo wing: • 16 Mbps—Lights if the interface is operating at 16 Mbps. • 4 Mbps—Lights if the interface is operating at 4 Mbps. • In Ring? ...

  • Cisco Systems CX-TRIP4 - page 4

    4 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Product Description Figure 3 T oken Ring T ype 3 Lobe Cable Connectors, DB-9 and RJ-11 T ypes T oken Ring Ph ysical Connections The term T oken Ring refers to both IBM’ s T oken Ring Network, which IBM de veloped in the 1970s, and to IEEE 802.5 networks. The IEEE 802.5 spe ...

  • Cisco Systems CX-TRIP4 - page 5

    Token Ring Interface Processor (TRIP) Installation and Configuration 5 Product Description In the typical T oken Ring network sho wn in Figure 4, lobe cables connect each T oken Ring station (TRIP port) to the MSA U (or MA U), and patch cables connect adjacent MSA Us (or MA Us) to form one large ring. Figure 4 T oken Ring Network Physical Connectio ...

  • Cisco Systems CX-TRIP4 - page 6

    6 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Product Description What is the Cisco 7000 Series? Network interfaces reside on modular interf ace processors, which provide a direct connection between your external netw ork and the high speed Cisco Extended Bus (CxBus) in the Cisco 7000 series routers, and the CyBus in th ...

  • Cisco Systems CX-TRIP4 - page 7

    Token Ring Interface Processor (TRIP) Installation and Configuration 7 Product Description Figure 6 Cisco 7010, Interface Processor End H2359 RP slot SP or SSP slot Interface processor slot 1 DC OK LED Power switch Chassis ground screw Power receptacle Interface processor slot 2 Interface processor slot 0 AC-input power supply ...

  • Cisco Systems CX-TRIP4 - page 8

    8 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Product Description What is the Cisco 7500 Series? The Cisco 7500 series consists of three router models: the Cisco 7505, the Cisco 7507, and the Cisco 7513. All three models provide high reliability , av ailability , serviceability , and performance. The three systems suppo ...

  • Cisco Systems CX-TRIP4 - page 9

    Token Ring Interface Processor (TRIP) Installation and Configuration 9 Product Description Figure 8 shows the rear of the se ven-slot Cisco 7507 router . In the Cisco 7507, up to two slots (2 and 3) are reserved for the Route Switch Processor (RSP2), which contains the system processor and performs packet switching functions. Slots 0 and 1, and 4 t ...

  • Cisco Systems CX-TRIP4 - page 10

    10 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Product Description Figure 9 sho ws the rear of the Cisco 7513, with two A C-input power supplies installed. T wo slots (6 and 7) are reserved for the second generation Route Switch Processor (RSP2), which contains the system processor and performs packet switching function ...

  • Cisco Systems CX-TRIP4 - page 11

    Token Ring Interface Processor (TRIP) Installation and Configuration 11 Installation Prerequisites Installation Prerequisites This section provides a list of parts and tools you will need to perform the installation, and safety and ESD-pre vention guidelines to help you to a void injury and damage to the equipment. It also provides a detailed descr ...

  • Cisco Systems CX-TRIP4 - page 12

    12 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Installation Prerequisites T elephone Wir ing Saf ety Use the following guidelines when w orking with any equipment that is connected to telephone wiring or to other network cabling: • Ne ver install telephone wiring during a lightning storm. • Ne ver install telephone ...

  • Cisco Systems CX-TRIP4 - page 13

    Token Ring Interface Processor (TRIP) Installation and Configuration 13 Installation Prerequisites Online Inser tion and Remov al—An Ov er vie w Online insertion and remov al (OIR) allo ws you to remov e and replace interface processors while the system is operating; you do not need to notify the software or shut do wn the system po wer . This se ...

  • Cisco Systems CX-TRIP4 - page 14

    14 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Installation Prerequisites The function of the ejector lev ers (see Figure 10) is to align and seat the card connectors in the backplane. Failure to use the ejectors and insert the interf ace processor properly can disrupt the order in which the pins make contact with the b ...

  • Cisco Systems CX-TRIP4 - page 15

    Token Ring Interface Processor (TRIP) Installation and Configuration 15 Installation Prerequisites Figure 10 Ejector Lever s and Captive Installation Screws Interface processor card slot Interface processor card carrier guide (black) Ejector lever Captive installation screw H1984 a b c ...

  • Cisco Systems CX-TRIP4 - page 16

    16 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Installation List of P ar ts and T ools V erify that you ha ve all of the parts and optional equipment you will need to install the TRIP . If you need additional equipment, contact a service representativ e for ordering information. • One TRIP • One T oken Ring 802.5 me ...

  • Cisco Systems CX-TRIP4 - page 17

    Token Ring Interface Processor (TRIP) Installation and Configuration 17 Installation Step 4 Store the interface processor filler for future use. T o help prevent dust and contaminants from entering the chassis, do not lea v e the interface processor slot open. Immediately proceed to the section “Installing a TRIP” on page 18. Removing a TRIP T ...

  • Cisco Systems CX-TRIP4 - page 18

    18 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Installation Step 5 Place the remov ed TRIP on an antistatic mat or foam pad, or place it in an antistatic bag if you will return it to the factory . Step 6 If the interface processor slot is to remain empty , install an interface processor filler (MAS7K-BLANK) to keep dus ...

  • Cisco Systems CX-TRIP4 - page 19

    Token Ring Interface Processor (TRIP) Installation and Configuration 19 Checking the Installation Step 7 Attach network interface cables or other connection equipment to the interf ace ports. (See Figure 12). Figure 12 T oken Ring Connections Step 8 Check the status of the interfaces as follo ws: • If this installation was a replacement TRIP , us ...

  • Cisco Systems CX-TRIP4 - page 20

    20 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Configuring the Interfaces Figure 13 TRIP LEDs Configuring the Interfaces Y ou can modify the startup configuration for Cisco 7000 series and Cisco 7500 series routers through the software command interpreter called EXEC . T o configure the interfaces for interface proc ...

  • Cisco Systems CX-TRIP4 - page 21

    Token Ring Interface Processor (TRIP) Installation and Configuration 21 Configuring the Interfaces T o configure T oken Ring interfaces using the setup EXEC command f acility , follow the instructions in the section “Using the Setup Command” on page 21. T o configure the T oken Ring interfaces by using the configure EXEC command, follo w the ...

  • Cisco Systems CX-TRIP4 - page 22

    22 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Configuring the Interfaces Step 3 Proceed through the remainder of the global parameter prompts, using the Return key to accept the defaults. After the global parameters are configured, the system prompts you for interface configuration information, one interface at a ti ...

  • Cisco Systems CX-TRIP4 - page 23

    Token Ring Interface Processor (TRIP) Installation and Configuration 23 Configuring the Interfaces Basic Configuration Guidelines Follo wing are instructions for a basic configuration: enabling an interface and specifying IP routing. Y ou might also need to enter other configuration subcommands, depending upon the requirements for your system co ...

  • Cisco Systems CX-TRIP4 - page 24

    24 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Checking the Configuration Chec king the Configuration After configuring the ne w interface(s) using either the setup command or the configure command, use the EXEC show commands to display status information. Step 1 T o display the current system configuration file, ...

  • Cisco Systems CX-TRIP4 - page 25

    Token Ring Interface Processor (TRIP) Installation and Configuration 25 Upgrading Microcode Upgrading Micr ocode Depending on how it is configured, the Cisco 7000 series router allo ws the Switch Processor (SP) and interface processors to use updated microcode that is a vailable either in Flash memory on the Route Processor (RP) or on the onboard ...

  • Cisco Systems CX-TRIP4 - page 26

    26 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Upgrading Microcode Step 5 Confirm that you want the file copied into Flash: Copy trip1-0 from 131.108.13.111 into flash memory? [confirm] yes Step 6 If you do not want the other microcode files in Flash memory erased, enter no OR If you want Flash erased, enter ye s . E ...

  • Cisco Systems CX-TRIP4 - page 27

    Token Ring Interface Processor (TRIP) Installation and Configuration 27 Upgrading Microcode Step 13 V erify that the correct microcode v ersion is av ailable in Flash memory: Router# show controllers token Y ou ha ve no w completed do wnloading microcode to the Flash memory , downloaded the microcode to the TRIP , added the microcode commands to th ...

  • Cisco Systems CX-TRIP4 - page 28

    28 T ok en Ring Interface Processor (TRIP) Installation and Configur ation Cisco Information Online Cisco Inf ormation Online Cisco Information Online (CIO) is Cisco Systems’ primary , real-time support channel. Maintenance customers and partners can self-register on CIO to obtain additional content and services. A vailable 24 hours a day , 7 da ...

Manufacturer Cisco Systems Category Network Card

Documents that we receive from a manufacturer of a Cisco Systems CX-TRIP4 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- CX-TRIP4 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems CX-TRIP4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems CX-TRIP4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems CX-TRIP4, service manual, brief instructions and user manuals Cisco Systems CX-TRIP4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems CX-TRIP4.

Similar manuals

A complete manual for the device Cisco Systems CX-TRIP4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems CX-TRIP4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems CX-TRIP4.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems CX-TRIP4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems CX-TRIP4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems CX-TRIP4, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems CX-TRIP4 - which should help us in our first steps of using Cisco Systems CX-TRIP4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems CX-TRIP4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems CX-TRIP4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems CX-TRIP4?

Use the form below

If you did not solve your problem by using a manual Cisco Systems CX-TRIP4, ask a question using the form below. If a user had a similar problem with Cisco Systems CX-TRIP4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)