English dropdown-ico

Manual Patton electronic 1040

12 pages 0.48 mb
Download

Go to site of 12

Summary
  • Patton electronic 1040 - page 1

    USER MANUAL MODEL 1040 Self-Powered Universal Short Range Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://ww w .patton.com Part #07M1040-B Doc. #0540 1 1UB Revised 4/29/98 An ISO-9001 Certified Company ...

  • Patton electronic 1040 - page 2

    1.0 W ARRANTY INFORM A TION Patton Electronic s warrants all Model 1040 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorize ...

  • Patton electronic 1040 - page 3

    3.0 CONFIGUR A TION The Model 1040 is simple to install and is ruggedly designed for excellent reliability: just set it and forget it. The following instructions will help you set up and install the Model 1040 properl y . If you have any questions, don’t hesitate to call Patton Electronics T echnical Support at (301) 975-1007. 3.1 CONFIGUR A TION ...

  • Patton electronic 1040 - page 4

    3.2 CONFIGUR A TION SWITCH SETTINGS The Model 1040 has two sets of eight switches, yielding 16 total DIP switches. The two sets will be referred to as SW1 and SW2. As Figure 2 shows, the orientation of all DIP switches is the same with respect to “ON” and “OFF” positions. 3.3 SWITCH SET SW1 The DIP switches on SW1 set data rate, clock sourc ...

  • Patton electronic 1040 - page 5

    SW2-3: Extended Signaling Rate The setting for switch SW2-3 determines the range of variability the Model 1040 “looks for” in asynchronous data rates (i.e., the actual variance from a given frequency level the Model 1040 will tolerate). SW2-3 Setting Off -2.5% to +1% On -2.5% to +2.3% SW2-4 and SW2-5: RTS/CTS Delay The combined settings for swi ...

  • Patton electronic 1040 - page 6

    4.0 INS T ALL A TION Once the Model 1040 is properly configured, it is ready to connect to your system. This section tells you how to connect the Model 1040 to the twisted pair and RS-232 interfaces. 4.1 CONNECTION T O THE TWISTED P AIR INTER F ACE The Model 1040 supports data-only communication between two RS-232 devices at distances to 12 miles ( ...

  • Patton electronic 1040 - page 7

    1. Open the unit by gently inserting a screwdriver into the special pry slot on the plastic case (below). Don't worry about breaking the plastic, but make sure that you do not insert the screwdriver more than 1/4” into the enclosure, as you may damage the unit. Once the unit has been opened, you will be able to see the terminal blocks locate ...

  • Patton electronic 1040 - page 8

    8 . Place the 2 halves of the strain relief assembly on either side of the telephone wire and press together very lightl y . Slide the assembly so that it is about 2 inches from the terminal posts and press together firml y . If your cable diameter is too small or too large for our strain relief, please contact our technical support. W e have strai ...

  • Patton electronic 1040 - page 9

    Connection to Model 1040 † Connection to DCE Device DB-25 Pin No . DB-25 Pin No. 1 .....................................................1 2 .....................................................3 3 .....................................................2 4 .....................................................8 8 ..................................... ...

  • Patton electronic 1040 - page 10

    5.3.1 Local Analog Loopback (LAL) The Local Analog Loopback (LAL) test checks the operation of the local Model 1040, and is performed separately on each unit. Any data sent to the local Model 1040 in this test mode will be echoed (returned) back to the user device. For example, characters typed on the keyboard of a terminal will appear on the termi ...

  • Patton electronic 1040 - page 11

    APPENDIX A P A T T ON MODEL 1040 SPECIFIC A TIONS T ransmission Format : Sync. or async., full or half duplex T ransmission Line: Unconditioned twisted pair 19 - 26 A WG Clocking: Internal, external or receive loopback Interfaces: EIA RS-232, CCITT V .24 Data Rates: 1.2, 1.8, 2.4, 3.6, 4.8, 7.2, 9.6, 14.4, 19.2, 28.8, 38.4 Kbps (switch selectable) ...

  • Patton electronic 1040 - page 12

    APPENDIX C P A T T ON MODEL 1040 PIN/SIGNAL ASSIGNMENTS APPENDIX D P A T T ON MODEL 1040 BLOCK DIAGRAM Copyright © 1998 Patton Electronics Company All Rights Reserved 1- (FG) Frame Ground 2- (TD) T ransmit Data T o Model 1040 3- (RD) Receive Data From Model 1040 4- ( R TS) Request to Send T o Model 1040 5- (CTS) Clear to Send From Model 1040 6- (D ...

Manufacturer Patton electronic Category Modem

Documents that we receive from a manufacturer of a Patton electronic 1040 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 1040 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 1040
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 1040.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 1040, service manual, brief instructions and user manuals Patton electronic 1040. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 1040.

Similar manuals

A complete manual for the device Patton electronic 1040, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 1040 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 1040.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 1040 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 1040, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 1040, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 1040 - which should help us in our first steps of using Patton electronic 1040
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 1040
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 1040 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 1040?

Use the form below

If you did not solve your problem by using a manual Patton electronic 1040, ask a question using the form below. If a user had a similar problem with Patton electronic 1040 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)