Manual Canon LV-5220

64 pages 3.56 mb
Download

Go to site of 64

Summary
  • Canon LV-5220 - page 1

    E English Multimedia Pr ojector Owner’ s Manual LV -7225 L V -7220 L V -5220 ...

  • Canon LV-5220 - page 2

    2 F eatures and Design ◆ Wide Zoom Lens This projector is equipped with Wide Zoom Lens which is 1.6 times the zoom ratio, and it allows you to enjoy 100" screen size in range of 8.2' (2.5m) to 13.1' (4m). ◆ Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. ...

  • Canon LV-5220 - page 3

    3 T able of Contents F eat ures and Design . . . . . . . . . . . . . . . . . . .2 T able of Cont ents . . . . . . . . . . . . . . . . . . . . . .3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4 Saf ety Instr uctions . . . . . . . . . . . . . . . . . . . .5 Air Circulation 6 Installing the Projector in Proper Position 6 Moving the P ...

  • Canon LV-5220 - page 4

    4 To the Owner CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE ...

  • Canon LV-5220 - page 5

    5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m ...

  • Canon LV-5220 - page 6

    6 Safety Instructions USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR –D o not drop or bump a projector, otherwise damages or malfunctions may result. – When carrying a projector, use a suitable carrying case. – Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to ...

  • Canon LV-5220 - page 7

    7 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Po wer Cor d for the Unit ed States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding ...

  • Canon LV-5220 - page 8

    8 Bac k q Focus Ring w Speaker e Power Cord Connector r Infrared Remote Receiver t Zoom Lever y Projection Lens u Lens Cover (See page 50 for attaching.) i Air Intake Vent o Top Controls and Indicators !0 Air Intake Vent !1 Terminals and Connectors !2 Air Intake Vent (back and bottom) !3 Air Filter !4 Adjustable Feet !5 Lamp Cover !6 Exhaust Vent ! ...

  • Canon LV-5220 - page 9

    9 Pa rt Names and Functions A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. Rear T er minal IN DVI - I / RGB IN-1 RGB OUT S-VIDEO IN RGB IN-2 / COMPONE ...

  • Canon LV-5220 - page 10

    10 Pa rt Names and Functions INPUT W ARNING LAMP REPLACE MENU POWER AUT O SET SET VOL VOL + - q w e r t y i y LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p52) t WARNING indicator Lights red when the projector detects abnormal condition. This also blinks red when the internal temperature of the projecto ...

  • Canon LV-5220 - page 11

    11 Pa rt Names and Functions Pa rt Names and Functions Remot e Contr ol Unit q @2 RESET/ON/ALL-OFF switch When using the remote control unit, set this switch to “ON.” Set it to “ALL OFF” for power saving when it is not used. Slide this switch to "RESET" to initialize the remote control code or switch Spotlight and Pointer back to ...

  • Canon LV-5220 - page 12

    12 Pa rt Names and Functions Spotlight P oint er F unction Pointer ✔ Note: You can choose the size of Spotlight (Large, Middle, and Small) and the pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See “Pointer” on page 46. This remote control unit emits a laser beam from the laser light window. With the LASER button pressed, la ...

  • Canon LV-5220 - page 13

    13 Pa rt Names and Functions Pa rt Names and Functions The remote control unit can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is used, the wireless mouse is not available. Move the poi ...

  • Canon LV-5220 - page 14

    14 Pa rt Names and Functions To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or LR6 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control unit to moisture, or heat. ? ...

  • Canon LV-5220 - page 15

    15 Installation Projection angle can be adjusted up to 11.9 degrees with the adjustable feet. Lift the front of the projector and pull upward the feet lock latches on both sides of the projector. 1 Adjustable Feet Feet Lock Latches Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and ti ...

  • Canon LV-5220 - page 16

    16 NO TE ON THE POWER CORD AC power cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer. Installation To power cord connector on your projector. Pr oject or side AC o ...

  • Canon LV-5220 - page 17

    17 Installation Installation Connecting t o a Comput er AUDIO R IN L VIDEO IN DVI-I/ RGB IN-1 SERVICE POR T S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/ COMPONENT IN/ RGB OUT RESET MCI Cables used for connection • VGA Cable (HDB 15 pin) ✽ • DVI-VGA Cable (HDB 15 pin) • USB Cable • Audio Cables (Mini Plug: stereo) ✽ ( ✽ = Not suppl ...

  • Canon LV-5220 - page 18

    18 AUDIO R IN L VIDEO IN DVI-I/ RGB IN-1 SERVICE POR T S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/ COMPONENT IN/ RGB OUT RESET MCI Installation Connecting t o V ideo Equipment Cables used for connection • Video and Audio Cable (RCA x 3) ✽ • S-VIDEO Cable ✽ • Audio Cables (Mini Plug: stereo) ✽ ( ✽ = Not supplied with this projecto ...

  • Canon LV-5220 - page 19

    19 Installation Installation Connecting t o Component V ideo Equipment AUDIO R IN L VIDEO IN DVI-I/ RGB IN-1 SERVICE POR T S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/ COMPONENT IN/ RGB OUT RESET MCI Cables used for connection • Audio Cables (Mini Plug (stereo) x 2 or RCA x 2) ❉ , (RCA x 3) ✽ • Scart-VGA Cable ✽ • Component-VGA Cabl ...

  • Canon LV-5220 - page 20

    20 Connect the projector's AC power cord into an AC outlet. The POWER indicator blinks red in a moment and lights red. Press the POWER button on the top control or on the remote control unit. The POWER indicator turns green lighting and the cooling fans start to operate. The preparation display appears on the screen and the count down starts. ...

  • Canon LV-5220 - page 21

    21 Basic Operation Basic Operation Press the POWER button on the top control or on the remote control unit, and a message "Power off?" appears on the screen. Press the POWER button again to turn off the projector. The POWER indicator starts to blink red, and it continues while the cooling fans are operating for about 90 seconds. (About 12 ...

  • Canon LV-5220 - page 22

    22 Basic Operation INPUT L A MENU AUT O SET SET VOL VOL + - Top Control Menu bar Pointer (red frame) Menu icon Item data Press the Point 7 8 buttons to adjust value. SET button Pointer (red frame) Press the Point d button to move the pointer. Item Ho w t o Oper at e the On-Scr een Menu MENU button SET button POINT button (outer ring) On-Screen Menu ...

  • Canon LV-5220 - page 23

    23 Basic Operation Basic Operation Menu Bar PC System Menu Used to select computer system. (p28) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Sharpness / Gamma] (p33) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p42-48) Sound Menu Used to adj ...

  • Canon LV-5220 - page 24

    24 Basic Operation Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the projected picture focus. Zoom Lever Focus Ring Au to Setup F unction Auto setup function is provided to automatically correct Keystone distortion according to the projector's tilt and adjust the computer display parameters (Fine sync, Total dots an ...

  • Canon LV-5220 - page 25

    25 Basic Operation Basic Operation Press the FREEZE button on the remote control unit to freeze the picture on the screen. To cancel FREEZE, press the FREEZE button again. (p11) If a projected picture still has keystone distortion after pressing the AUTO SET button on the top control or on the remote control unit, correct the image manually as foll ...

  • Canon LV-5220 - page 26

    26 Basic Operation 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Sound Menu icon. Volume Press the VOL (+/–) button on the top control or on the remote control unit to adjust volume. The volume dialog box appears on the screen for a few seconds. (+) button to turn up ...

  • Canon LV-5220 - page 27

    27 Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move ...

  • Canon LV-5220 - page 28

    28 Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon displays the system being selected. The systems on this dialog box can be selected. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon. ...

  • Canon LV-5220 - page 29

    29 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows. Move the red frame pointer to the Auto PC Adj. icon and press the SET button. PC Adjust Menu PC Adjust Menu icon To store adjustment pa ...

  • Canon LV-5220 - page 30

    30 Computer Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the PC Adjust Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the item that you want to adjust and then press the SET button. An adjustment dialog box will appear. Press the Point 7 8 but ...

  • Canon LV-5220 - page 31

    31 Computer Input Select the resolution at the Display area dialog box. Display area Adjusts the horizontal area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SET button. Display area H Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase value ...

  • Canon LV-5220 - page 32

    32 Computer Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the level that you want to set and then press the SET button. Move the red frame pointer to the level and press the SET bu ...

  • Canon LV-5220 - page 33

    33 Computer Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the item that you want to adjust, and then press the SET button. The level of ...

  • Canon LV-5220 - page 34

    34 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. 1 Move the red frame to the function and press the SET button. Press the Point d d b ...

  • Canon LV-5220 - page 35

    35 Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input ...

  • Canon LV-5220 - page 36

    36 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 1 Press the Point d d button to move the red arrow pointer to Computer 2, and then press the SET button. The Source Select Menu will appear. 2 Move the pointer to the correct input source and then ...

  • Canon LV-5220 - page 37

    37 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the AV System Menu icon. 1 V ideo S yst em Selection AV System Menu (Video or S-Video) AV System Menu (Component) Press the Point d d button to move the red arrow pointer to the system that you want to select and then ...

  • Canon LV-5220 - page 38

    38 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the level that you want to set and then press the SET button. Move the red frame pointer to a level and press the SET button. ...

  • Canon LV-5220 - page 39

    39 Video Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the item that you want to adjust and then press the SET button. The level of each ...

  • Canon LV-5220 - page 40

    40 Video Input To store the adjustment data, move the red frame pointer to the Store icon and press the SET button. The message “OK?” will appear. Select [Yes] to store the adjustment data. To select this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p38). “OK?” message Move the pointer to [ ...

  • Canon LV-5220 - page 41

    41 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. Press the Point d d button and move the red frame pointer to the function that you want ...

  • Canon LV-5220 - page 42

    42 Keystone Press the MENU button to display the On-Screen Menu. Press the Point 7 8 button to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese. Set the red frame point ...

  • Canon LV-5220 - page 43

    43 Setting Logo PIN code lock Dialog Box Quit Pointer Enter a Logo PIN code Select a number by pressing the Point 7 8 button and fix the number with the SET button. The number will change to " ✳ ". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d d button, then return to ...

  • Canon LV-5220 - page 44

    44 Setting Terminal The RGB IN-2/ COMPONENT IN/ RGB OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select Computer 2 or Monitor Out with the Point 78 button. RGB IN-2 . . . . . . .computer input RGB Out . . . . . . . .monitor out Terminal item is not available when selecting Computer 2 to ...

  • Canon LV-5220 - page 45

    45 Setting Lamp mode This function allows you to change brightness of the screen. Normal mode ···· normal brightness Auto mode ···· brightness according with the input signal Silent mode ···· lower brightness reduces the lamp power consumption and extends the lamp life. The sound is quiet. Power management Time left until Lamp off Press ...

  • Canon LV-5220 - page 46

    46 Setting Select Spotlight or Pointer with the Point e e d d button and press the SET button. Then select size or pattern with the Point 7 8 button. Pointer You can emphasize a part of the projected image with this function. Choose either Spotlight or Pointer with the Point ed button and press the SET button. Then select one of three different siz ...

  • Canon LV-5220 - page 47

    47 Setting The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point d d button, and press the SET button. The New PIN code input dialog box will appear. Select a number with the Point 7 8 button and fix the number with the SET button. Repeat it to complete entering a four-digit number. When th ...

  • Canon LV-5220 - page 48

    48 Setting This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 53 for operation. Lamp counter reset Factory default This function returns all setting values except for the user logo, PIN code lock, logo PIN code lock and the lamp counter to the ...

  • Canon LV-5220 - page 49

    49 Maintenance & Cleaning The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. W ARNING LAMP REPLACE PO WER AU TO SET VO L + WARNING blinking red TOP CONTROL Wa r n i ng Indicator The projector is shut down and the WARNING ...

  • Canon LV-5220 - page 50

    50 Maintenance and Cleaning Air Filter Pull up and remove. Turn off the projector, and disconnect the AC power cord from the AC outlet. Turn the projector upside down and remove the air filters by pulling the latches upward. 1 2 Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air fi ...

  • Canon LV-5220 - page 51

    51 Maintenance & Cleaning Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Cleaning the Pr ojector Cabinet Disconnect the AC power cord before cleaning. 1 Softly wipe the projector body with a soft, dry cleaning ...

  • Canon LV-5220 - page 52

    52 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the lamp with a new one promptly. Follow these steps to replace the lamp. Lamp Lamp Cover ORDER REPLA CEMENT LAMP Replacement lamp can be ordered through your dealer. ...

  • Canon LV-5220 - page 53

    53 Maintenance & Cleaning Maintenance and Cleaning Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP REPLACE indicator stops lighting. Move the pointer to Lamp counter reset and then press the SET button. The message “Lamp replace counter Reset?” is displayed. Turn the pro ...

  • Canon LV-5220 - page 54

    54 Tr oubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer" and “Connecting to Video Equipment” on page17-19. – Make sure all equipment is connected to AC o ...

  • Canon LV-5220 - page 55

    55 Appendix This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix The CE Mark is a Directive conformity mark of the European Community (EC). Some displays are not seen – Check the ...

  • Canon LV-5220 - page 56

    56 Appendix Menu T ree System (1) MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Reset Mode free Store Quit High contrast Blackboard(Green) Custom Image Adjust Contrast Brightness Color Temp Red Green Blue Gamma Store Quit Normal True ...

  • Canon LV-5220 - page 57

    57 Appendix Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Cinema Blackboard(Green) Custom Quit Normal Wide 0 - 63 0 - 63 0 - 63 0 - 63 Off Set ting Image Select System (2) System (3) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Progressive 0 - 63 0 - 63 0 - ...

  • Canon LV-5220 - page 58

    58 Appendix Check the indicators for projector condition. • • • lights green. • • • lights red. • • • off • • • blinks green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the La ...

  • Canon LV-5220 - page 59

    59 Appendix Appendix Compatible Comput er Specifications LV-7225 / LV-7220 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. LV-5220 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 100 MHz of Dot Clock. These modes a ...

  • Canon LV-5220 - page 60

    60 Appendix Te c hnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 11.81" x 3.23" x 8.94" (300mm x 82mm x 227mm) (Not including adjustable feet) Net Weight 6.48 lbs (2.9kgs) Feet Adjustment 0˚ to 11.9˚ Panel Resolution LV-7225 / LV-7220 LV-5220 LCD Panel System 0.8" TFT Ac ...

  • Canon LV-5220 - page 61

    61 Appendix Appendix Model No. COMPONENT-VGA Cable : LV-CA32 SCART - VGA Cable : LV-CA31 (Not available in the U.S.A) Multi Card Imager Box : LV-MI01 Compact Flash Card : LV-WN03 Wired LAN Card : LV-WN01 Wireless LAN Card : LV-WN02 CEILING HANGER : LV-CL08 When using the Wired or Wireless LAN Card, set the following name in the PJ Controller operat ...

  • Canon LV-5220 - page 62

    62 Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 SERVICE PORT CONNECTOR Appendix RGB INPUT/COMPONENT INPUT/RGB OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) 2 34 1 Configur ations of T er minals R X D ----- ----- GND RTS / CTS T X D GND GND Serial 1 2 3 4 5 6 ...

  • Canon LV-5220 - page 63

    63 Appendix Appendix Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code... ...

  • Canon LV-5220 - page 64

    ©CANON INC . 2004 YT1-1350 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U.S.A., INC. One Canon Plaza, Lake Success , NY 11042-1198, U .S.A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC. 703 W aterford W ay Suite 400 Miami, Florida 33126 U .S.A. CANON EUROPA N.V. P. ...

Manufacturer Canon Category Projector

Documents that we receive from a manufacturer of a Canon LV-5220 can be divided into several groups. They are, among others:
- Canon technical drawings
- LV-5220 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon LV-5220
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon LV-5220.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon LV-5220, service manual, brief instructions and user manuals Canon LV-5220. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon LV-5220.

Similar manuals

A complete manual for the device Canon LV-5220, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon LV-5220 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon LV-5220.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon LV-5220 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon LV-5220, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon LV-5220, that we can find in the current document
3. Tips how to use the basic functions of the device Canon LV-5220 - which should help us in our first steps of using Canon LV-5220
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon LV-5220
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon LV-5220 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon LV-5220?

Use the form below

If you did not solve your problem by using a manual Canon LV-5220, ask a question using the form below. If a user had a similar problem with Canon LV-5220 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)