Manual Dual XDVD710

60 pages 5.84 mb
Download

Go to site of 60

Summary
  • Dual XDVD710 - page 1

    INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with 7” Touch Screen Display XDVD710 The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is ill ...

  • Dual XDVD710 - page 2

    Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and ...

  • Dual XDVD710 - page 3

    2 DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software t ...

  • Dual XDVD710 - page 4

    3 XDVD710 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occ ...

  • Dual XDVD710 - page 5

    XDVD710 OPERATION 4 Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD710 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. Safety Notes: The DVD video displ ...

  • Dual XDVD710 - page 6

    5 Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm) TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, su ...

  • Dual XDVD710 - page 7

    6 Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. Rear view camera A rear view camera (not included) can be used with the CAMERA input. NEED HELP?? Call our Technical Service Hotline, 1-866-382-5476. Wiring Notes: XDVD710 INSTALLATION Expanded Wiring Diagram - Input ...

  • Dual XDVD710 - page 8

    7 Wiring Diagram - Optional A/V Connections XDVD710 INSTALLATION ...

  • Dual XDVD710 - page 9

    XDVD710 OPERATION 8 IR Remote Preparation Notes: Remove the battery if the remote will not be used for a month or longer Remove and dispose of battery properly • • To first use the IR Remote control, you must first pull the battery insulation tape out Insert or replacing the Battery: Remove the battery holder Remove the battery from the battery ...

  • Dual XDVD710 - page 10

    9 XDVD710 OPERATION 15 7 1 2 4 5 Band Auto Store/Preset Scan Secondary LCD Display Open/Close Monitor Eject Rotary Encoder/Enter Mode 1 2 3 4 5 6 7 8 Play/Pause/Scan Stop Chapter/Track Up Chapter/Track Down Fast Forward Fast Reverse Mute Power/Volume 9 10 11 12 13 14 15 14 13 12 11 10 9 8 16 This model incorporates a motorized moving monitor. Befor ...

  • Dual XDVD710 - page 11

    10 XDVD710 OPERATION Control Functions - Monitor Closed Press BAND to increment from FM1, FM2, FM3, AM1 ] FM1. Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND . Additional LCD for system information while monitor is closed. Press the DISP button to ...

  • Dual XDVD710 - page 12

    11 XDVD710 OPERATION Disc-in indicator - Red = Disc inserted, White = No disc. ANGLE  - Press to decrease the monitor view angle. ANGLE  - Press to increase the monitor view angle. INFO - Press to select DVD INFO and press and hold for BRIGHTNESS . Press to RESET system. The DVD video display of the in-dash unit will not operate while the veh ...

  • Dual XDVD710 - page 13

    XDVD710 OPERATION 12 White = No disc Red = Disc inserted Press ANGLE  to increase the monitor view angle. Press ANGLE  to decrease the monitor view angle. Notes: • Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. • The color of the LCD monitor varies bet ...

  • Dual XDVD710 - page 14

    XDVD710 OPERATION 13 Mode Mute Open/Close Power Key #1 Key #2 Key #3 Volume Up Key #4 Key #5 Key #6 Volume Down Key #7 Key #8 Key #9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Info Search Key #0 Band/Stop Audio Select Escape 4-Way - Up Menu Picture 4-Way - Left Ok 4-Way - Right Repeat A-B Title Menu 4-Way - Down 16 17 18 19 20 21 22 23 24 25 26 27 28 29 3 ...

  • Dual XDVD710 - page 15

    XDVD710 OPERATION 14 Control Functions - Remote Mode Mute Open/Close Power Keys 0-9 Volume Up Volume Down Info Search Band/Stop Audio Select Escape 4-Way -Up/Down/Left/Right Menu Picture Ok Repeat A-B Title Menu Root Repeat Chapter/Track Down Chapter/Track Up Fast Rewind Fast Forward Zoom Audio Angle Sub-Title Press once to incrementally select des ...

  • Dual XDVD710 - page 16

    XDVD710 OPERATION 15 Power On/Off Monitor Open/Close Monitor Angle Position Press POWER momentarily to turn the unit on, the unit will beep 2 times. Press and hold POWER for more than 2 seconds, unit will beep 1 time, then turn off. Note: EJECT will still function even if POWER is off. Press OPEN to open or close the monitor. The unit will emit 1 c ...

  • Dual XDVD710 - page 17

    XDVD710 OPERATION 16 Mode Optional Mode Selection Volume Mute Audio Adjustment from front panel Audio Adjustment from Remote Press MODE to select between TUNER , DVD , AUX IN , XM, iPOD and CAMERA inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD . Notes: XM tuner and/or iPod (both optional) must be connected ...

  • Dual XDVD710 - page 18

    XDVD710 OPERATION 17 INFO/PIC RGB BRIGHTNESS CVBS Screen Controls SHARPNESS CONTRAST COLOR BRIGHTNESS TINT Press INFO button for 1 second to display DVD disc information. Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS: Press ANGLE  to increase, ANGLE  to decrease, or use VOLUME rotary to adjust the level up or down. (0 minimum ...

  • Dual XDVD710 - page 19

    XDVD710 OPERATION 18 Press BAND to increment from FM1, FM2, FM3, AM1 ] FM1. Press AS/PS momentarily to start station PRESET SCAN function. The unit will now scan your program presets for 10 seconds for each preset in that band. Press AS/PS again to stop scanning. Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND ...

  • Dual XDVD710 - page 20

    XDVD710 OPERATION 19 Note: Secondary LCD only functions when TFT monitor is closed. LOCAL indicator, icon will be off when DISTANCE (DX) is selected STEREO radio station indicator Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK , etc LOUDNESS selection indicator XM SATELLITE RADIO indicator Note : XM Radio requires an optional XM t ...

  • Dual XDVD710 - page 21

    XDVD710 OPERATION 20 There are three methods to access the MAIN menu Press the ENTER button on the right ROTARY knob Press the MENU button on the remote control Touch the upper left corner of the touch screen Touch to access AM/FM TUNER mode Touch to access CD/DVD mode, ( CD/DVD must be inserted) Touch to access iPod mode, ( iPod must be connected ...

  • Dual XDVD710 - page 22

    XDVD710 OPERATION 21 GENERAL Setup - Menu Press the GENERAL button to access the GENERAL setup mode Select desired parameter you wish to change Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button GENERAL Setup Menu matrix • • • General Setup Menu Note: Default anti-theft password is 0000 Se ...

  • Dual XDVD710 - page 23

    XDVD710 OPERATION 22 Adjusting Radio Frequency Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch top left corner of screen 2) Touch GENERAL setup button 3) Touch USA 4) Touch the setting for your region Touch RETURN to exit L L GENERAL Setup - Adjusting Radio Frequency L L L 3 4 5 1 2 ...

  • Dual XDVD710 - page 24

    XDVD710 OPERATION 23 GENERAL Setup - Adjusting the Clock 12Hr Clock Mode Step 1 Step 2 Step 3 Steps 4-8 24Hr Clock Mode 1) Touch top left corner of screen 2) Touch GENERAL setup button 3) Touch 00:00 area in the CLOCK row 4) Keypad should now appear 5) Enter HOURS, touch ok 6) Enter MINUTES, touch ok 7) Touch AM or PM to set 8) Touch RETURN to exit ...

  • Dual XDVD710 - page 25

    XDVD710 OPERATION 24 XDVD710 OPERATION GENERAL Setup - Setting the Anti-theft code By default Anti-theft password is 0000 and is turned Off. To turn this feature on, follow the steps below. CAUTION!! This will lock your unit from operating if battery POWER is disconnected for more than 5 minutes. Step 1 & 2 Step 3 & 4 Step 5 & 6 Step 7 ...

  • Dual XDVD710 - page 26

    XDVD710 OPERATION 25 Screen Setup Menu System Standby Press the SCREEN button to access the SCREEN setup mode Select desired parameter you wish to change Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button SCREEN Setup Menu matrix To conserve the LCD backlight lifespan or to eliminate glare while ...

  • Dual XDVD710 - page 27

    XDVD710 OPERATION 26 SCREEN Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button on the front TFT panel. Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch top left corner of screen 2) Touch SCREEN setup button 3) Touch [-] to dim TFT 4) Touch [+] to brighten TFT ...

  • Dual XDVD710 - page 28

    XDVD710 OPERATION 27 SCREEN Setup - Setting TFT Angle Set for best viewing angle in your vehicle Step 1 Step 2 Step 3 Step 4 Step 5 1) Touch top left corner of screen 2) Touch SCREEN setup button 3) Touch a number displayed in SCREEN TILT row 4) Touch desired angle for best viewing angle 1 - 6 is possible Default = 4 5) Touch RETURN to exit L L 1 2 ...

  • Dual XDVD710 - page 29

    XDVD710 OPERATION 28 XDVD710 OPERATION SCREEN Setup - Touch Screen Calibration On occasion, the touch screen will have to be calibrated. Follow these steps as described. Step 1 Step 2 Step 3 & 4 Step 5 & 6 1) Touch top left corner of screen 2) Touch SCREEN setup button 3) Touch No in TS Calibration row 4) Then touch Yes 5) Touch and hold th ...

  • Dual XDVD710 - page 30

    XDVD710 OPERATION 29 Current MODE information, touch upper left area to return to MAIN MENU Current PRESET station indicator STEREO broadcast indicator Clock PRESET page up LOCAL/DISTANCE selection PRESET page down Auto station SCAN button MANUAL TUNE up MANUAL TUNE down SEEK TUNE up SEEK TUNE down AS/PS (AUTO STORE/PRESET SCAN) BAND selection, FM1 ...

  • Dual XDVD710 - page 31

    XDVD710 OPERATION 30 XDVD710 OPERATION AM/ FM Tuner Operation Press the button to auto SEEK up the next strongest station. Press the button to auto SEEK down the next strongest station. Press the button to manually tune up one step at a time. Press the button to manually tune down one step at a time. Press and hold AS/PS for more than 2 seconds to ...

  • Dual XDVD710 - page 32

    XDVD710 OPERATION 31 WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occu ...

  • Dual XDVD710 - page 33

    XDVD710 OPERATION 32 DVD Operation - Parking Brake Initialization Front TFT Video Initialization Parking Brake Initialization Situation 1 Parking Brake Initialization Situation 2 SAFETY WARNING • The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash vide ...

  • Dual XDVD710 - page 34

    XDVD710 OPERATION 33 DVD Disc Symbols DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been ...

  • Dual XDVD710 - page 35

    XDVD710 OPERATION 34 DVD Operation - Inserting a Disc DVD Loading Slot Inserting a Disc Ejecting the Disc Resetting the Loading Mechanism When inserting a DVD disc, usually it will play automatically. Other sub-menus may have to be pressed to access the DVD movie/music content. Read the directions of your specific DVD disc for other features. Note: ...

  • Dual XDVD710 - page 36

    XDVD710 OPERATION 35 Hidden Touch Screen area while in TUNER mode Hidden Touch Screen areas while in DVD mode There are several hidden TOUCH SCREEN areas outlined below: "A" area can be used in any mode to access MAIN menu "A-F" areas can be used in DVD mode to access: A - Displays MAIN menu B - Displays DVD track information C ...

  • Dual XDVD710 - page 37

    XDVD710 OPERATION 36 Using the hidden Touch Screen Controls A - Displays MAIN menu B - Displays DVD track information C - Selects PREVIOUS chapter D - Select NEXT chapter E - Displays the full DVD transport controls F - GOTO search menu L L L L AREA A Access MAIN Menu AREA B Displays Track Information AREA C Selects PREVIOUS Track AREA D Selects NE ...

  • Dual XDVD710 - page 38

    XDVD710 OPERATION 37 L Using the hidden Touch Screen Controls Touch AREA E 1) 2) 3) 4) 5) 6) 7) 8) 9) Touch the PLAY button or on the front panel to resume disc playback Touch the PAUSE button again to suspend the disc playback Touch button to STOP playback, touch or ok on the remote to resume playback Touch the REVERSE button to FAST REVERSE on DV ...

  • Dual XDVD710 - page 39

    XDVD710 OPERATION 38 Notes: Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD710 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. Searching a DVD Searching by Time, Title or Chapter S ...

  • Dual XDVD710 - page 40

    XDVD710 OPERATION 39 Direct Chapter / Track Selection Viewing an Alternate picture Angle (DVD only) Multi-Language Disc Changing Subtitle Language DVD Playback Information Playback Information 1) 2) 3) 4) 5) 6) 7) During DVD and CD playback, you can use the numeric keypad on the remote control to access tracks directly. Some DVD's contain scen ...

  • Dual XDVD710 - page 41

    XDVD710 OPERATION 40 With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu. Press LANGUAGE icon to select LANGUAGE setup page Press to select desired disc subtitle language English French Spanish Auto Off = DEFAULT Press to select desired disc audio language Engl ...

  • Dual XDVD710 - page 42

    XDVD710 OPERATION 41 With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu. Press VIDEO icon to select from the following menus: Press to select desired TV shape Select On to activate angle mark Press to select desired view mode Video Setup Menu TV Shape Angle Ma ...

  • Dual XDVD710 - page 43

    XDVD710 OPERATION 42 With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu. Press DVD Setup to access the DVD setup menu. Press RATING icon to select from the following menus: Press ---- to enter a password, then press Ok 1. Enter a 4-digit code 2. Write the code down 3. Save in a safe place When unlock symb ...

  • Dual XDVD710 - page 44

    XDVD710 OPERATION 43 CD User Interface 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) Current MODE information, touch upper left area to return to MAIN MENU Disc title Track title Current TIME Touch to PLAY/PAUSE disc playback Touch to STOP disc playback Touch to PAGE down Touch to PAGE up Touch to FAST REVERSE current track Touch to FA ...

  • Dual XDVD710 - page 45

    XDVD710 OPERATION 44 Playing CD-DA discs Selecting by Keypad Selecting by Direct Track Access Previous/Next Page After inserting a CD disc, files will play in numerical order in the directory. Touch to display keypad. Enter desired track number and press ok. Touch desired track for DIRECT TRACK access. Touch to view UP/DOWN pages of available TRACK ...

  • Dual XDVD710 - page 46

    XDVD710 OPERATION 45 MP3/WMA User Interface 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) Current MODE information, touch upper left area to return to MAIN MENU Disc title Track title Current TIME Touch to PLAY/PAUSE disc playback Touch to STOP disc playback Touch to PAGE down Touch to PAGE up Touch to PREVIOUS FOLDER Touch to NEXT ...

  • Dual XDVD710 - page 47

    XDVD710 OPERATION 46 Playing MP3/WMA files Selecting by Single Track Selecting by Direct Track Access Previous/Next Page After inserting an MP3/WMA disc, files will play in numerical order in the directory. Touch to display keypad. Enter desired track number and press ok. Touch desired track for DIRECT TRACK access. Touch to view UP/DOWN pages of a ...

  • Dual XDVD710 - page 48

    XDVD710 OPERATION 47 The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW • CD-DA, DVD Video • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • Discs recorded with Track At O ...

  • Dual XDVD710 - page 49

    XDVD710 OPERATION 48 An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Onl y MP3 files with file nam e exte nsi on (. mp3 ) can be play ed. Onl y WMA files with file nam e ex ...

  • Dual XDVD710 - page 50

    XDVD710 OPERATION 49 iPod User Interface 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) Current MODE information, touch upper left area to return to MAIN MENU Artist name Track title Current TIME Touch to PLAY/PAUSE iPod playback Touch to STOP iPod playback Touch to PAGE down Touch to PAGE up Touch to FAST REVERSE curren ...

  • Dual XDVD710 - page 51

    XDVD710 OPERATION 50 Playing iPod files To select iPod mode, press the MODE button on the front panel, remote control, or press the iPod icon on the MAIN menu. Selecting by Keypad Selecting by Direct Song Access Previous/Next Page After connecting an iPod, files will play in numerical order in the directory. Touch to display keypad. Enter desired s ...

  • Dual XDVD710 - page 52

    XDVD710 OPERATION 51 Playing photo or video files from iPod Releasing Video control from iPod iPod will now reconnect • Touch VIDEO icon, iPod is now disconnected and waiting for video signal. • Make sure VIDEO OUTPUT is turned on in your iPod . Consult your iPod owner's manual for details • Press PLAY on your iPod , photos or video shou ...

  • Dual XDVD710 - page 53

    XDVD710 OPERATION 52 Selecting Music By: Playlist Artist Album Genre Song Rapid Dial Character Support iPod Compatibility Touch desired Folder, music will begin to play after selection. RAPID DIAL can also control iPod touch screen functions Select desired item by rotating clockwise or counter-clockwise Item will be outlined in blue Press to confir ...

  • Dual XDVD710 - page 54

    XDVD710 OPERATION 53 Activating Your XM Tuner (when connected) 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 1. Press MODE to select XM Radio. 2. Verify channel 1 (XM Preview Channel) is playing. 3. Select Channel 0. The XM tuners' eight character Radio ID number will appear on the XDVD710 display. The Radio ID number is also ...

  • Dual XDVD710 - page 55

    XDVD710 OPERATION 54 Tuning Modes Channel Selection Storing and Recalling Preset Channels Direct Channel Selection Channel Search by Category Quick Select of Category Touch to select between XM, XM1. XM2 and XM3 bands. Touch momentarily to select the next available channel. Up to 48 XM channels can be stored. To store a channel, select XM1, XM2 or ...

  • Dual XDVD710 - page 56

    55 This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp. agrees, at our option, dur ...

  • Dual XDVD710 - page 57

    XDVD710 OPERATION 56 Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has power (but no sound) Speaker wires not connected Ch ...

  • Dual XDVD710 - page 58

    XDVD710 OPERATION 57 DVD Player FM Tuner AM Tuner Monitor General Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-1710kHz Usable sensit ...

  • Dual XDVD710 - page 59

    XDVD710 OPERATION 58 Notes ...

  • Dual XDVD710 - page 60

    Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2006 Dual Electronics Corp. All rights reserved. NSA1106-V02.5 Printed in China ...

Manufacturer Dual Category Car Video System

Documents that we receive from a manufacturer of a Dual XDVD710 can be divided into several groups. They are, among others:
- Dual technical drawings
- XDVD710 manuals
- Dual product data sheets
- information booklets
- or energy labels Dual XDVD710
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dual XDVD710.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dual XDVD710, service manual, brief instructions and user manuals Dual XDVD710. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dual XDVD710.

Similar manuals

A complete manual for the device Dual XDVD710, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dual XDVD710 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dual XDVD710.

A complete Dual manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dual XDVD710 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dual XDVD710, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dual XDVD710, that we can find in the current document
3. Tips how to use the basic functions of the device Dual XDVD710 - which should help us in our first steps of using Dual XDVD710
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dual XDVD710
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dual XDVD710 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dual XDVD710?

Use the form below

If you did not solve your problem by using a manual Dual XDVD710, ask a question using the form below. If a user had a similar problem with Dual XDVD710 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)