Manual Barco PGXG-61B / PGWX-61B / PGWU-61B

56 pages 21.78 mb
Download

Go to site of 56

Summary
  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 1

    PGXG-6 1B / PGWX-6 1B / PGWU-6 1B User manual ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 2

    Doc. Revision: 00 Barco nv Projection Division Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 Support: www .barco.com/esupport Visit us at the web: www .barco.com ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and tness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without n ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 4

    ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 5

    5 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. SAFETY .................................................................................................................................................................................. 6 1.1 General considerations ....................................................................................... ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 6

    6 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety 1. SAFETY 1.1 General considerations About this chapter Read this chapter attentively . It contains important information to prevent personal injury while installing and using your PRESENT series projector . Furthermore, it includes several cautions to prevent damage to your PRESENT series proj ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 7

    7 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety Notice on safety This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technol - ogy equipment including electrical business equipment. These ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 8

    8 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety Do not immerse or expose this projector in water or other liquids. y Do not spill liquid of any kind on this projector . y Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by qualied service y personnel before resuming operations. Do not disassemble ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 9

    9 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety medical attention if unusual health conditions occur after a lamp rupture, explosion, such as headache, fatigue, shortness of breath, chest-tightening coughing or nausea. T o prevent re hazard Do not place ammable or combustible materials near the projector! y Barco large screen projectio ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 10

    10 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety T o ensure the highest optical performance and resolution, the projection lenses are specially treated with an y anti-reective coating, therefore, avoid touching the lens. T o remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution, or thinner . Rated maxi ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 11

    11 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 1. Safety T o prevent battery explosion Danger of explosion if battery is incorrectly installed. y Replace only with the same or equivalent type recommended by the manufacturer . (AAA LR03,1.5V) y For disposal of used batteries, always consult federal, state, local and provincial hazardous waste disposa ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 12

    12 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2. INTRODUCTION 2.1 Installation requirements About this chapter Read this chapter before installing PRESENT series projector . It contains important information concerning instal- lation requirements for the PRESENT series projector , such as minimum and maximum allowed ambient tempera ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 13

    13 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction Projector Power requirements PGXG-61B AC INPUT 100-240V , 6.5A, 50/60Hz PGWX-61B AC INPUT 100-240V , 6.5A, 50/60Hz PGWU-61B AC INPUT 100-240V , 6.5A, 50/60Hz The power cord required to connect the projector with the power net is delivered with the projector . Projector weight Do not unde ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 14

    14 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2.3 Product Overview 2 1 3 4 6 5 2.3.1 Main Unit Component Location Note: The Projection Lens is optional item not a standard accessary in the package. 1 Projection Lens 2 Lamp Cover 3 T ilt-Adjustment Feet 4 Input/Output (I/O) Panel 5 Power Switch 6 Power Socket (AC Input: AC100-240V~, ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 15

    15 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2.3.2 Input/Output (I/O) Panel Component Location 5 2 6 7 4 3 1 8 9 1 Networking Connector RJ45 2 DVI-D Input ConnectorVideo Input Connector 3 BNC Input Connector (YPbPr/RGBHV) 4 +12V Relay Connector 5 Video Input Connector 6 HDMI Connector 7 VGA Connector (PC Analog Signal/Component Vid ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 16

    16 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 2. Introduction 2.3.3 Remote Control Button Location 8 5 3 4 2 9 10 6 7 1 1 On/Off 2 Home 3 OK 4 Arrow Right 5 Arrow UP 6 Arrow Left 7 Arrow Down 8 LED Indication 9 Battery Compart- ment 10 IR LED’S Basic Remote Command (Result) Remote Lite (Action) Start the projector Press “On/off” 1 T urn off t ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 17

    17 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.1 RCU Battery Installation 3. INST ALLA TION Overview RCU Battery Installation y Installing the Lens y Connecting the Projector y Powering On/Off the Projector y Adjusting the Projected Image y Ceiling Mount Installation y Remove the cover by sliding it in the direction indicated by th ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 18

    18 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.2 Installing the Lens T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 1 minute then start the lens 2. replacement. Remove the lens ring cover . 3. 1 Remove the lens cap counterclockwise. 4. 2 Pull the bar to release the lock. 5. 3 Be ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 19

    19 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.3 Connecting the Projector 3.3.1 Removing the rear cover Procedure Unscrew the three crews on the cover . 1. 1 Lift up and remove the cover . 2. 2 T o install the rear cover , reverse the previous steps. 3. 1 2 Projection Lens P/N R9832755 R9832753 R9832754 R9832756 Lens Type Wide Zoom ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 20

    20 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 1 3 2 4 5 6 +12V Relay Output Network Port 7 1 Power Cord 2 12V DC Jack 3 RS232 Cable 4 VGA in Cable 5 HDMI Cable 6 Network Cable 7 VGA out Cable 3.3.2 Connecting to a Computer or Laptop Wiring Diagram ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 21

    21 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.3.3 Connecting to Video Sources Wiring Diagram 3 Video Output 1 2 DVD Player , Set-top Box, HDTV Receiver 5 6 +12V Relay Output 4 1 Power Cord 2 12V DC Jack 3 BNC Cable 4 DVI-D Cable 5 HDMI Cable 6 Composite Video Cable ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 22

    22 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation 3.4 Powering On/Of f the Projector Ensure that the power cord and signal cable are securely connected. Power on the switch 1.  and the Status LED is solid red. T urn on the lamp by pressing “ 2. ” on the remote control. The Status LED is of f.  The startup screen displays in ap ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 23

    23 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation Adjusting the Projector ’ s Position 3.5 Adjusting the Projected Image T o determine where to position the projector , consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some ge ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 24

    24 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation -28% +100% 1 10% 100% 100% -100% 100% 100% +28% Lens Center V ertical Image Offset: +/-100% Horizontal Image Offset: +/-28% Lens Center -28% +100% 1 10% 100% 100% -100% 100% 100% +28% ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 25

    25 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 3. Installation Ensure the screws used to attach a mount to the projector meet the following specications: Screw type: M6*10 - Mounting dimension - 3.6 Ceiling Mount Installation 160.00 95.00 241.20 216.20 155.1 1 184.79 Mounting Holes Note: Damage resulting from incorrect installation will void the ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 26

    26 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1 On-Screen Display Menus 4. USER CONTROLS The projector has On-Screen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. 4.1.1 Using the OSD Lite Menus Main Menu & Buttons Main Menu Basic OSD Lite navigation (Result) Remote Lite (Action ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 27

    27 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Main menu is on screen, go to button re - quired (Result) Remote Lite -> OSD Lite (Action -> On Screen) Select input manually 6 4 5 7 3 > 6 4 5 7 go to input desired (default setting = AutoSelect) > 3 Make the image brighter or darker 3 6 4 > 3 default setting= middle Ada ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 28

    28 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2 Using the Advanced OSD Menus Procedure: Select the Advanced button in OSD Lite Menus then press the sequential key : LEFT > LEFT > 1. RIGHT > DOWN buttons to enter advanced menu. When the advanced OSD displays, use the arrow keys to navigate in the menu and enter to a de ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 29

    29 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.1 Input Menu Input Select Select the active source, include the following options: HDMI y DVI y VGA y 5BNC y Video y Auto Power Off Switch off after a while when no sync detected. Off: Default value. Disable auto power of f function. y On: Projector will switch off automatically w ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 30

    30 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.2 Image Menu Brightness Adjust the brightness of the image. Press the ◄ to darken image. y Press the ► to lighten the image. y Contrast Adjust the contrast of the image. Press the ◄ to decrease the contrast. y Press the ► to increase the contrast. y Saturation Adjust the c ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 31

    31 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Sharpness Adjust the sharpness of the image. Press the ◄ to decrease the sharpness. y Press the ► to increase the sharpness. y Noise Reduction Reduce temporary and/or spatial noise in the image. Press the ◄ to decrease the noise. y Press the ► to increase the noise. y Color T em ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 32

    32 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.3 Layout Menu Main Size Set the size of the main window . This function is zoom out/cropping image, the location of image will be kept in center . Press the ◄ to decrease the main size. y Press the ► to increase the main size. y Main Select Select the source for the main windo ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 33

    33 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.4 Lamps Menu Mode Set lamp mode of the projector . Normal: Default value. When set to normal mode, the wattage of the lamp will be at 330W . y Eco: When set to eco mode, the wattage of the lamp will be at 280W . y Power: Enable lamp power adjust. y High Altitude When “On” is s ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 34

    34 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.5 Alignment Menu Rear Projection Reverse the image horizontally when the setup is with the projector at the rear of the screen. Off: Default value. Projector is in front projection mode. y On: Projector is in rear projection mode. y Ceiling Mode Reverse the image vertically when t ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 35

    35 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Green Weighting of White y Blue Weighting of White y Press the ◄ to decrease the custom color space. y Press the ► to increase the custom color space. y Reset to default: Resets all color points to default value. y Enable Off: Default value. y On: CCN enable. y Auto T est Pattern Of ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 36

    36 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.6 Control Menu Eco Network Power Switch on/off the network power to save power . Off: Default value. Network is enable in standby . y On: Network is not available in standby . y RS232 Baudrate Select RS232 baudrate. 1 15200: Default value for this function. y 9600/19200: Other opt ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 37

    37 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls 4.1.2.7 Service Menu Model The designated model number of the projector . Serial No The designated serial number of the projector . Soft V ersion The version of software installed on the projector . Main/PIP Source Display the current main and PIP sources. Active Resolution Display the ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 38

    38 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 4. User Controls Projector Runtime Display the projector ’s total operating hours. Factory Reset Set all persistent settings back to default values. This function will not apply to items including No Signal, Network, Language, Lamp Hours and Projector Hours. ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 39

    39 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 5. Troubleshooting No image appears on-screen y Ensure all the cables and power connections are correctly and securely connected as described in the “In- - stallation” section. Check if all pins are ok in the connector . - Check if the projection lamp has been securely installed. - Note: This projec ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 40

    40 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 5. Troubleshooting Image is unstable or ickering y Use “TIMINGSH PHASE” to correct it. - Change the monitor color setting on your computer . - Image has vertical ickering bar y Use “AUTO IMAGE” to make an adjustment. - Check and recongure the display mode of your graphic card to make i ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 41

    41 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 5. Troubleshooting Message Description Filter Error: When you see the warning message, it means the lter is failed to operate. Overheating: When you see the warning message, it means the tem- perature is over operational temperature. 5.3 W arning Message Note: Please contact service people when you s ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 42

    42 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 6. Maintenance & Service T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 30 minutes. 2. Unscrew the sixs crews on the cover . 3. 1 Lift up and remove the cover . 4. Unscrew the three screws on the lamp module. 5. 2 Lift up the lamp handle and remov ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 43

    43 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 6. Maintenance & Service T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 30 minutes. 2. Unscrew the sixscrews on the cover . 3. 1 Lift up and remove the cover . 4. Lift up the air lter slowly and carefully . 5. 2 Clean or replace the air lter ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 44

    44 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 6. Maintenance & Service T urn the projector off and unplug the power cord. 1. Allow the projector to cool down for at least 1 minute then start the lens 2. replacement. Remove the lens ring cover . 3. 1 Remove the lens cap counterclockwise. 4. 2 Pull the bar to release the lock. 5. 3 Be sure the la ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 45

    45 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.1 PGXG-61B 7. SPECIFICA TIONS Specications PGXG-61B Projector type single-chip DLP projector T echnology 0.7" DMD Color Wheel 6S standard (RGBYCW) Resolution XGA 1024x768 Brightness* 6750 ANSI lumen Brightness (eco-mode)* 4900 ANSI lumen Contrast ratio 1 100:1 Contrast ratio ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 46

    46 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Specications PGXG-61B Optical dowser n/a Advance Picture in Picture Y es Orientation table - ceiling W ARP n/a Integrated web server n/a 3D Y es, TI DLP-Link Keystone Correction Y es Ease of Use Simplied OSD menu + Remote control Inputs G/Y , B/Pb, R/Pr , H/C, V; VGA; CVBS; HDMI ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 47

    47 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.2 PGWX-61B Specications PGWX-61B Projector type single-chip DLP projector T echnology 0.65" DMD Color Wheel 6S standard (RGBYCW) Resolution WXGA 1280x800 Brightness* 6200 ANSI lumen Brightness (eco-mode)* 4500 ANSI lumen Contrast ratio 1 100:1 Contrast ratio (Dynamic contras ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 48

    48 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Specications PGWX-61B Keystone Correction Y es Ease of Use Simplied OSD menu + Remote control Inputs G/Y , B/Pb, R/Pr , H/C, V; VGA; CVBS; HDMI-1 v1.3 ; DVI-D Input Resolutions up to WUXGA (1920x1200) 60Hz Software tools Projection T oolset Control IR; RS232; RJ45 Network connec ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 49

    49 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.3 PGWU-61B Specications PGWU-61B Projector type single-chip DLP projector T echnology 0.67" DMD Color Wheel 6S standard (RGBYCW) Resolution WUXGA 1920x1200 Brightness* 5900 ANSI lumen Brightness (eco-mode)* 4250 ANSI lumen Contrast ratio 1 100:1 Contrast ratio (Dynamic contr ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 50

    50 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Specications PGWU-61B Keystone Correction Y es Ease of Use Simplied OSD menu + Remote control Inputs G/Y , B/Pb, R/Pr , H/C, V; VGA; CVBS; HDMI-1 v1.3 ; DVI-D Input Resolutions up to WUXGA (1920x1200) 60Hz Software tools Projection T oolset Control IR; RS232; RJ45 Network connec ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 51

    51 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications W ARNING: Be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting y plate. Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector . y Avoid installing the projector near a heat source. y 364.00 1 12.68 293. ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 52

    52 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications 7.5 Compatibility Modes Signal Resolution Frequency H. (KHz) V . (Hz) Video Digital Analog Remark NTSC -- 15.734 60 ○ -- -- P AL/SECAM -- 15.625 50 ○ -- -- 640×350 31.5 70.1 -- ○ ○ 70Hz 640×400 37.9 85.1 -- ○ ○ 85Hz VGA 640×480 31.5 60 -- ○ ○ 640×480 67 -- ○ ○ ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 53

    53 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 7. Specications Signal Resolution Frequency H. (KHz) V . (Hz) Video Digital Analog Remark HDTV 1920×1080 33.8 30 ○ -- -- 1920×1080 28.1 25 ○ -- -- 1920×1080i 28.125 50 -- ○ ○ 1920×1080i 33.75 60 -- ○ ○ 1920×1080p 24 -- ○ ○ 1920×1080p 25 -- ○ ○ 1920×1080p 30 -- ○ ○ 1920? ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 54

    54 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 8. Environmental information 8.1 Disposal information 8. ENVIRONMENT AL INFORMA TION Overview Disposal information y RoHS compliance y Disposal Information W aste Electrical and Electronic Equipment This symbol on the product indicates that, under the European Directive 2002/96/EC governing waste from e ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 55

    55 PGXG-61B/PGWX-61B/PGWU-61B - - 2013/1 1/20 8. Environmental information Hazardous Substances Or Elements / 有毒有害物质或元素 Component Name / 部件名称 Lead (Pb) / 铅 (Pb) Mercury (Hg) / 汞 (Hg) Cadmium (Cd) / 镉 (Cd) Chromium VI Compounds (Cr VI) / 六价铬 (Cr VI) Polybrominated Biphenyls (PBB) / 多溴联苯 (PBB) Polybromina ...

  • Barco PGXG-61B / PGWX-61B / PGWU-61B - page 56

    Production Address No.20, 3rd Ave, Kunshan Free T rade Zone, Jiangsu, P .R. China ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco PGXG-61B / PGWX-61B / PGWU-61B can be divided into several groups. They are, among others:
- Barco technical drawings
- PGXG-61B / PGWX-61B / PGWU-61B manuals
- Barco product data sheets
- information booklets
- or energy labels Barco PGXG-61B / PGWX-61B / PGWU-61B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco PGXG-61B / PGWX-61B / PGWU-61B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco PGXG-61B / PGWX-61B / PGWU-61B, service manual, brief instructions and user manuals Barco PGXG-61B / PGWX-61B / PGWU-61B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco PGXG-61B / PGWX-61B / PGWU-61B.

Similar manuals

A complete manual for the device Barco PGXG-61B / PGWX-61B / PGWU-61B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco PGXG-61B / PGWX-61B / PGWU-61B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco PGXG-61B / PGWX-61B / PGWU-61B.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco PGXG-61B / PGWX-61B / PGWU-61B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco PGXG-61B / PGWX-61B / PGWU-61B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco PGXG-61B / PGWX-61B / PGWU-61B, that we can find in the current document
3. Tips how to use the basic functions of the device Barco PGXG-61B / PGWX-61B / PGWU-61B - which should help us in our first steps of using Barco PGXG-61B / PGWX-61B / PGWU-61B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco PGXG-61B / PGWX-61B / PGWU-61B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco PGXG-61B / PGWX-61B / PGWU-61B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco PGXG-61B / PGWX-61B / PGWU-61B?

Use the form below

If you did not solve your problem by using a manual Barco PGXG-61B / PGWX-61B / PGWU-61B, ask a question using the form below. If a user had a similar problem with Barco PGXG-61B / PGWX-61B / PGWU-61B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)