English dropdown-ico

Manual Cisco Systems IGX 8

12 pages 0.05 mb
Download

Go to site of 12

Summary
  • Cisco Systems IGX 8 - page 1

    APPENDIX -1 System Specifications A This appendix contains system specifications. General This section provides general system information on the IGX 8. System Capacity: 1 shelf with 8 card slots. Requires 2 dedicated front slot(s) for NPMs. Requires 2 dedicated back slots for SCMs (1 slot with blank plate). Up to 6 T1/E1 circuit ports. Up to 6 T1 ...

  • Cisco Systems IGX 8 - page 2

    -2 IGX 8 Installation Manual, Release 8.2.0 V oice Cir cuit Suppor t Input A C Po wer Connector: IEC 16 Amp input connector . 6 dif ferent power cords are a v ailable to comply with the standards of individual countries. Po wer cords are 6 feet (about 2 meters) long. See A C Power Cabling for details. DC Input Connections 3-wire pluggable terminal ...

  • Cisco Systems IGX 8 - page 3

    -3 Data Channel Suppor t Sync. Data Interfaces: RS-232C/D, RS-449/422, V .24, X.21, and V .35 with IGX 8 as DCE or DTE. High-Speed Data Rates (HDM): 2.4 Kbps to 1.344 Mbps. Low-Speed Data Rates: 2.4 to 19.2 Kbps per LDM port. Ports per card: LDI: 4 or 8. SDI: 4. Control Leads Supported: SDI: Per interface standards. SDI: Up to 7 in each direction f ...

  • Cisco Systems IGX 8 - page 4

    -4 IGX 8 Installation Manual, Release 8.2.0 Digital Data Service Interface Ports per card: Four . Electrical Interface: Digital Data System (DDS)—A T&T Pub. 62310, No vember 1987. Interface T ype: DSU or OCU (software selectable). Data Rates: 2.4, 4.8, 9.6, 19.2, and 56 Kbps (software selectable). DDS Data Encoding: Standard DDS Bipolar Retur ...

  • Cisco Systems IGX 8 - page 5

    -5 T1 Interface Line Rate: 1.544 Mbps, ± 50 bps ( ± 200 bps VCO lock range). Line Code: Bipolar AMI or B8ZS. Framing Formats: Fractional T1, adjacent or alternating channels. Minimum of four DS0 channels required. Signal Le vel: DSX-1 compatible. Line Impedance: T erminated = 100 Ohms nominal. Bridged = 1 KOhm. Pulse Amplitude Indi vidual pulse a ...

  • Cisco Systems IGX 8 - page 6

    -6 IGX 8 Installation Manual, Release 8.2.0 E1 Interface Line Rate: 2.048 Mbps, ± 50 bps ( ± 200 bps VCO lock range) Line Code: Bipolar AMI or HDB3 Line Impedance: 120 Ohms (balanced) or 75 Ohms (balanced or unbalanced) Minimum Pulse Density: Zero code suppression via HDB3 coding Frame Format: Unframed, 32-channel (G.703). Framed: 30 or 31-channe ...

  • Cisco Systems IGX 8 - page 7

    -7 T3 Interface Line Rate: 44.736 Mbps ± 20 ppm, asynchronous. Line Code: B3ZS. Clock Source Mode: Internal (Asynchronous). Signal Le vel: DSX-3. Framing Formats: M13 mode, C-bit parity . Alarms Processed: AIS. LOS. Remote Alarm Indication. Loss Of Framing. Line Errors Counted: BPV . Parity Bit Errors. Receiv er Input Impedance: T erminated = 75 o ...

  • Cisco Systems IGX 8 - page 8

    -8 IGX 8 Installation Manual, Release 8.2.0 E3 Interface Line Rate: 34.368 Mbps ± 20 ppm, asynchronous. Line Code: HDB3. Clock Source Mode: Internal (Asynchronous). Signal Le vel: ITU-T G.703 Framing Formats: ITU-T G.804, G.832, Alarms Processed: AIS. LOS. Remote Alarm Indication. Loss Of Framing. Line Errors Counted: BPV . Parity Bit Errors. Rece ...

  • Cisco Systems IGX 8 - page 9

    -9 Frame Rela y Interface T ype of Service: Permanent V irtual Circuit (PVC). Data Interface: Per ITU-T I.122 and ANSI T1/S1 Standards. Data T ransfer Protocol: LAP-D frame level core functions. Input Data Format: High Le vel Data Link (HDLC) protocol. Input Data Frame Length: Up to 4096 bytes max. Frame Integrity Check: Frame Check Sequence and CR ...

  • Cisco Systems IGX 8 - page 10

    -10 IGX 8 Installation Manual, Release 8.2.0 A TM Interface Netw ork Synchr onization T ype of Service: Permanent V irtual Circuit (PVC) Interface T ypes: User-to-Netw ork (UNI) and Network-to-Network (NNI) per ITU I.361 and I.363 Data Rates: T3 or E3 A TM Layer: Physical Layer Con ver gence Protocol per A T&T publication T A-TSY -00772 and 000 ...

  • Cisco Systems IGX 8 - page 11

    -11 Netw ork Management Control Network Control T erminal: StrataV iew Plus workstation and StrataCom software required for graphical display of network status, statistics gathering and display , and automatic do wnloading of software. Control T erminal: DEC VT100, WYSE 85, T ele video 970 or equiv alent terminal for basic system configuring and a ...

  • Cisco Systems IGX 8 - page 12

    -12 IGX 8 Installation Manual, Release 8.2.0 ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems IGX 8 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- IGX 8 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems IGX 8
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems IGX 8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems IGX 8, service manual, brief instructions and user manuals Cisco Systems IGX 8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems IGX 8.

Similar manuals

A complete manual for the device Cisco Systems IGX 8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems IGX 8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems IGX 8.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems IGX 8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems IGX 8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems IGX 8, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems IGX 8 - which should help us in our first steps of using Cisco Systems IGX 8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems IGX 8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems IGX 8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems IGX 8?

Use the form below

If you did not solve your problem by using a manual Cisco Systems IGX 8, ask a question using the form below. If a user had a similar problem with Cisco Systems IGX 8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)