English dropdown-ico

Manual Craftsman 315.10899

20 pages 0.8 mb
Download

Go to site of 20

Summary
  • Craftsman 315.10899 - page 1

    Owner's Manual 7-1/4 in. CIRCULAR SAW Double Insulated Model No. 315.108990 Save this manual for future reference. _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.s ...

  • Craftsman 315.10899 - page 2

    • Table Of Contents .......................................................................................................................................... 2 • Warranty ......................................................................................................................................................... 2 • Introduction . ...

  • Craftsman 315.10899 - page 3

    The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBO ...

  • Craftsman 315.10899 - page 4

    RULES FOR SAFE OPERATION (Continued) USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty tool. Don't use tool for purpose not intended - for example - A circular saw should never be used for cutting tree limbs or logs. WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in tool&apo ...

  • Craftsman 315.10899 - page 5

    RULES FOR SAFE OPERATION (Continued) SUPPORT LARGE PANELS. To minimize the risk of blade pinching and kickback, always support large panels as shown in Figure 9, page 10. When cutting operation requires the resting of the saw on the workpiece, the saw should be rested on the larger portion and the smaller piece cut off. • LOWER BLADE GUARD. _k WA ...

  • Craftsman 315.10899 - page 6

    Horsepower Input Blade Diameter Blade Arbor Cutting Depth at 0 ° Bevel Cut 2-1/4 12 Amperes 7-1/4 in. (184 mm) 518 in. (16 mm) 2-3/8 in. (60 mm) Cutting Depth at 45 ° Bevel Cut Cutting Depth at 51.5 ° Bevel Cut Rating No Load Speed 1-13/16 in. (46 mm) 1-5/8 in. (41 mm) 120 volts, 60 Hz, AC 5,000 RPM Your circular saw has been shipped completely ...

  • Craftsman 315.10899 - page 7

    KNOW YOUR CIRCULAR SAW See Figure 1. Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. Features include easily operated bevel cut and depth of cut adjustment mechanisms; positive 0 ° bevel stop; length of cut scale; directed air flow for keeping line of cut clear; and blade wrench storage. ...

  • Craftsman 315.10899 - page 8

    A WARNING: Your saw should never be connected to power supply when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Disconnecting your saw will prevent accidental starting that could cause serious personal injury. ,_ WARNING: A 7-1/4 in. blade is the maximum blade capacity of your saw. Never ...

  • Craftsman 315.10899 - page 9

    SAW BLADES The best of saw blades will not cut efficiently if they are not kept clean, sharp, and properly set. Using a dull blade will place a heavy load on your saw and increase the danger of kickback. Keep extra blades on hand, so that sharp blades are always available. Gum and wood pitch hardened on blades will slow your saw down. Use gum and p ...

  • Craftsman 315.10899 - page 10

    TO LESSEN THE CHANCEOF KICKBACK: • Always keep the correct blade depth setting - the correct blade depth setting for all cuts should not exceed 1/4 inch below the material to be cut. See Figure 8. CORRECT BLADEDEPTH SE'mNG = BLADEEXPOSED 114 in. OR LESS ON UNDERSIDE OF WORKPIECE Fig. 8 • Inspect the workpiece for knots or nails before begi ...

  • Craftsman 315.10899 - page 11

    STARTING A CUT Know the right way to use your saw. See Figure 11. TO HELP MAINTAIN CONTROL: • Always support your workpiece near the cut. • Support your workpiece so the cut will be on your right. • Clamp your workpiece so it will not move during the cut. Place your workpiece with its good side down. Note: The good side is the side on which a ...

  • Craftsman 315.10899 - page 12

    Hold your saw firmly with both hands. See Figure 14. RIGHT Fig. 14 Squeeze the switch trigger to start your saw. Always let the blade reach full speed, then guide your saw into the workpiecs. ,_ WARNING: The blade coming in contact with the workpieca before it reaches full speed could cause your saw to "kickback" towards you resulting in ...

  • Craftsman 315.10899 - page 13

    TO BEVEL CUT The angle of cut of your saw may be adjusted to any desired setting between zero and 51.5 °. Note: When making cuts at 51.5 ° blade should be set at full depth of cut, with edge guide screw removed. When making 45 ° bevel cuts, there is a notch in the saw base to help you line up the blade with the line of cut. See Figure 16. BEVEL ...

  • Craftsman 315.10899 - page 14

    POSITIVE 0 ° BEVEL STOP See Figure 18. BEVEL ADJUSTMENT WING NUT POSITIVEO°BEVELSTOP CARPENTER'SSQUARE ADJUSTMENT SCREW HEX NUT SAW BLADE TO ADJUST • Unplug your saw. _k WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury. • Loosen wing nut. • Loosen hex nut securing adjustme ...

  • Craftsman 315.10899 - page 15

    TO POCKET CUT See Figure 20. ,_ WARNING: Always adjust bevel setting to zero before making a pocket cut. Attempting a pocket cut at any other setting can result in loss of control of your saw possibly causing serious injury. Adjust the bevel setting to zero, set blade to correct blade depth setting, and swing the lower blade guard up using the lowe ...

  • Craftsman 315.10899 - page 16

    ,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. GENERAL Only the parts shown on parts list, page 19, are intended to be repaired or replaced by the customer. All other parts represent an important part of the double insulation system and should be service ...

  • Craftsman 315.10899 - page 17

    17 ...

  • Craftsman 315.10899 - page 18

    CRAFTSMAN CIRCULAR SAW - MODEL NUMBER 315.108990 SEE NOTE "A" PAGE 19 2 3 4 28 27 11 13 14 21 18 17 18 ...

  • Craftsman 315.10899 - page 19

    [ CRAFTSMAN CIRCULAR SAW - MODEL NUMBER 315.108990 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CIRCULAR SAW or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS I Key Part No. Number 1 981579-001 2 969858-001 3 999637-OO3 4 9693 ...

  • Craftsman 315.10899 - page 20

    In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME sM (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 Au Canada pour tout le service ou les pi_ces - 1-800-469 4663 For the repair or replacement parts you need: Call 6 a.m. - 11 p,m. CST, 7 days a week Parts D ...

Manufacturer Craftsman Category Saw

Documents that we receive from a manufacturer of a Craftsman 315.10899 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 315.10899 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 315.10899
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 315.10899.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 315.10899, service manual, brief instructions and user manuals Craftsman 315.10899. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 315.10899.

Similar manuals

A complete manual for the device Craftsman 315.10899, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 315.10899 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 315.10899.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 315.10899 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 315.10899, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 315.10899, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 315.10899 - which should help us in our first steps of using Craftsman 315.10899
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 315.10899
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 315.10899 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 315.10899?

Use the form below

If you did not solve your problem by using a manual Craftsman 315.10899, ask a question using the form below. If a user had a similar problem with Craftsman 315.10899 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)