English dropdown-ico

Manual Runco RS-900 Series RS1100 Series

104 pages 6.13 mb
Download

Go to site of 104

Summary
  • Runco RS-900 Series RS1100 Series - page 1

    RS-900 Series RS1100 Series 1080p DLP TM Home Theater Projectors RS-900 RS-900/CineWide™ RS-900/CineWide with AutoScope™ RS1100 RS1100/CineWide™ RS1100/CineWide with AutoScope™ RS1100 Ultra RS1100 Ultra/CineWide™ RS1100 Ultra/CineWide with AutoScope™ I NSTALLATION /O PERATION M ANUAL ...

  • Runco RS-900 Series RS1100 Series - page 2

    ...

  • Runco RS-900 Series RS1100 Series - page 3

    RS-900 and RS1100 Series Inst allation/Operation Manual iii PRE L IMINAR Y TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers from Runco International, LLC (“Runco”) Congratulation s on your pu rchase of a Ru nco video product and welcome to the Runco fam ily! With prop er installation, se tup and care, yo u should enjoy ...

  • Runco RS-900 Series RS1100 Series - page 4

    iv RS-900 and RS1100 Series Installation/Operation Manu al PRE L IMINAR Y THE FOREGOING DESCRIBED WARRANTIES ARE THE ONLY WARRANTIES THAT APPLY TO THE PRODUCTS. RUNCO MAKES NO OTHER WARRANTY OR REPRESENTATION AND HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LI MITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND ...

  • Runco RS-900 Series RS1100 Series - page 5

    RS-900 and RS1100 Series Inst allation/Operation Manual v PRE L IMINAR Y © Copyright 200 8 Runco Internat ional, LLC (“Run co”). This documen t contains prop rietary inform ation prote cted by copyri ght, trademark a nd other intellect ual prop erty laws. All right s are reser ved. No part of this manua l may be re produced b y any mechanical, ...

  • Runco RS-900 Series RS1100 Series - page 6

    vi RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Thank you for you r purchase of this qu ality Runco video prod uct! It has been desig ned to provide yo u with the quality of vide o that is exp ected in a home the ater. For th e best perfo rmance, p lease read this man ual carefully as it is your guide through the menus and ...

  • Runco RS-900 Series RS1100 Series - page 7

    RS-900 and RS1100 Series Inst allation/Operati on Manu al vii PRE L IMINAR Y 19. Never look directly int o the lens w hen the lamp is on. Manufacturer’s Name: Run co Internation al, LLC Manufacture r’s Address: 119 5 NW Compto n Drive, Beaverto n, OR 97006 -1992 hereby declare s that the Prod ucts’ Model Number s: RS-900, RS-900/Cine Wide, RS ...

  • Runco RS-900 Series RS1100 Series - page 8

    viii RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Date of Decl aration: June 2008 NOTE: This equipment ha s been tes ted and found to comply w ith the limits fo r a Class B d igital device , pursuant to Part 15 o f the FCC Rules. T hese limits are designed to provide reas onable protect ion against har mful interference in ...

  • Runco RS-900 Series RS1100 Series - page 9

    RS-900 and RS1100 Series Inst allation/Operation Manual ix PRE L IMINAR Y Table of Hazardous Substances Model Name: R S 900 S eries Presence of one of the following RoHS-regulated substances would be indicated on the table via an “O” = compliant or a “X” = non-compliant. 㦘㹡㦘⹂䓸德⚜䱿♙⚺摞䤓㪖幕㫋㆞ Table of hazardous su ...

  • Runco RS-900 Series RS1100 Series - page 10

    x RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Table of Hazardous Substances Model Name: R S 1100 S eries Presence of one of the following RoHS-regulated substances would be indicated on the table via an “O” = compliant or a “X” = non-compliant. 㦘㹡㦘⹂䓸德⚜䱿♙⚺摞䤓㪖幕㫋㆞ Table of hazardous sub ...

  • Runco RS-900 Series RS1100 Series - page 11

    RS-900 and RS1100 Series Inst allation/Operation Manual xi 1 Table of Content s PRE L IMINAR Y TWO YEAR LIMITED WARRANTY ................... ................ ............. ................ ................ . iii Important S afety In s truction s .......................... ............. ............. ................ ............. ....... vi Complia ...

  • Runco RS-900 Series RS1100 Series - page 12

    Table of Contents xii RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Mounting the RS-900/RS1 100 ................... ............ ............. ................ ............. .......... 30 Floor Mount ing (Upright) .......... ................ ............. ............. ................ ............. ...... 30 Ceiling Mountin ...

  • Runco RS-900 Series RS1100 Series - page 13

    Table of Contents RS-900 and RS1100 Series Insta llation/Operation Manu al xiii PRE L IMINAR Y 5. Maintenance and Trouble s hooting .............. ............. ................ ............. ................ 69 Lamp Repla cement ................... ................. ............ ............. ............. ................ .......... 69 Troublesho ...

  • Runco RS-900 Series RS1100 Series - page 14

    Table of Contents xiv RS-900 and RS1100 Series Installation/Operation Manu al PRE L IMINAR Y Note s : ...

  • Runco RS-900 Series RS1100 Series - page 15

    RS-900 and RS1100 Series Inst allation/Operation Manual xv 1 Li s t of Figure s PRE L IMINAR Y 2-1. RS-900/RS1100 Front/Side/T op View .................... ................. ............ ................. ........ 5 2-2. RS-900/RS1100 Rear/Bottom/Sid e View ...... ................ ................ ............. ................ .. 7 2-3. RS-900/RS1 ...

  • Runco RS-900 Series RS1100 Series - page 16

    List of Figures xvi RS-900 and RS1 100 Series Installation/Operation Manu al PRE L IMINAR Y 4-6. Keystone Co rrection ..... ............. ................. ............ ............. ................ ............. .......... 60 4-7. Pincushion C orrection .. ................. ............. ............ ................. ............ ............. . ...

  • Runco RS-900 Series RS1100 Series - page 17

    RS-900 and RS1100 Series Inst allation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manu al describes how to insta ll, set up and operate a Runco RS-900 Series or RS1100 Series DLP™ Home Thea ter Projector. T his product fam ily consists of the RS-900, RS1100 and RS1100 Ultra Proje ctors. Throughout th is manual, t he Ru ...

  • Runco RS-900 Series RS1100 Series - page 18

    Introduc tion 2 RS-900 and RS1100 S eries Installation/Operation Manual PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous plac es througho ut the manual, to emp hasize points that you mu st keep in mind to avoid proble ms with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic i ...

  • Runco RS-900 Series RS1100 Series - page 19

    Introd uction RS-900 and RS1100 Series Inst allation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The RS-900 and RS1100 fami ly of Home Theater Proj ectors offer the a stounding pict ure quality and versatility heretofo re associated with more expensive projectors. Their 1920 x 1080, native-resolut ion DLP light engine f ...

  • Runco RS-900 Series RS1100 Series - page 20

    Introduc tion 4 RS-900 and RS1100 S eries Installation/Operation Manual PRE L IMINAR Y Key Features and Benefits The RS-900/RS110 0 offers th ese key feature s and benefits : • Native Resolution: 1920 x 108 0 (16:9 Native Aspect Ratio) • DLP system using SuperOnyx™ Dig ital Micromirror Device (DMD) • 7-segment color wheel pr oduces wide dyn ...

  • Runco RS-900 Series RS1100 Series - page 21

    RS-900 and RS1100 Series Inst allation/Operation Manual 5 PRE L IMINAR Y 2.1 RS-900/RS1100 at a Glance Figure 2-1 and Figure 2 -2 show the key RS-900/RS1 100 compone nts. Figure 2-1. R S -900/R S 1100 Fron t/ S ide/Top View 1. EXHAU S T VENT 2. ZOOM T AB ( S tandard R S -900/R S 1100) Use this to change the projected image size with a standard RS-9 ...

  • Runco RS-900 Series RS1100 Series - page 22

    Controls and Functions 6 RS-900 and RS1100 S eries Installation/Operation Manual PRE L IMINAR Y 4. TEMP LED Indicates fan sta tus and internal temperature as follo ws: • Off during norm al operation • Red when internal temperatur e is too high or a fan failure occu rs 5. INT AKE VENT 6. POWER/ S T ANDBY LED Indicates po wer status as follows: ? ...

  • Runco RS-900 Series RS1100 Series - page 23

    Controls and Functi ons RS-900 and RS1100 Series Inst allation/Operation Manual 7 PRE L IMINAR Y Figure 2-2. R S -900/R S 1100 Rear/Bottom/ S ide View 1. RUNCO LOGO The logo can be rotated to match the projector orientation: invert ed (ceiling-mounted) or upright. To rotate the logo, grip it at t he sides, pu ll it away fro m the pr ojector and rot ...

  • Runco RS-900 Series RS1100 Series - page 24

    Controls and Functions 8 RS-900 and RS1100 S eries Installation/Operation Manual PRE L IMINAR Y 2.2 RS-900/RS1100 Rear Panel Figure 2-3 shows the RS-900/R S1100 rear panel. Figure 2-3. R S -900/ R S 1100 Rear Pane l 1. HDMI 1 (Digital) HDCP-compliant dig ital video in put for connec ting a DVD player or HD tuner w ith a DVI or HDMI output. 2. HDMI ...

  • Runco RS-900 Series RS1100 Series - page 25

    Controls and Functi ons RS-900 and RS1100 Series Inst allation/Operation Manual 9 PRE L IMINAR Y 9. 12-VOL T (2 50 mA) TRIGGER OUTPU T (3.5-mm, mini phono jac k) Connection fo r a 12-volt trig ger-controlle d device. This can be a ret ractable scre en, screen mask or the Runco CineWide with Auto Scope system. 10. COMP 2 / RGB Five BNCs for connect ...

  • Runco RS-900 Series RS1100 Series - page 26

    Controls and Functions 10 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 1. LIGHT Press to illumin ate the buttons. 2. ON / OFF Use these butto ns to turn the pr ojector on or off. 3. S our ce S election Butto n s : VID Press to select Co mposite vi deo input as the source. S -VID ( S -Video) Press to select the S-V ideo inpu ...

  • Runco RS-900 Series RS1100 Series - page 27

    Controls and Functi ons RS-900 and RS1100 Series Inst allation/Operation Manual 11 PRE L IMINAR Y 5. Picture Adju s tment Button s : BRT (Brigh tne ss ) Press to adjust black level. CONT (Contra s t) Press to adjust white level. COL (Color) Press to adjust color intensity. TINT Press to adju st color hu es. 6. Memory Pre s e t Button s : I S F NIGH ...

  • Runco RS-900 Series RS1100 Series - page 28

    Controls and Functions 12 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 9. Picture -In-Picture (PIP) Co ntrol s : ACT Press to switch to the ac tive window in PIP mode . PIP Press to activate PIP m ode. PIP+ Press to enlarge the PIP window. PIP- Press to shrink the size of the PIP window. 10. Motorized Len s Contr ol s : FOC ...

  • Runco RS-900 Series RS1100 Series - page 29

    RS-900 and RS1100 Series Inst allation/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batterie s in the rem ote control, push the battery cover and slide it off. Install the two AAA batteries w ith the correc t polarity a nd then replac e the cove r. Notes on Batteries • Make sure that the battery pol arities are c orrect when i ...

  • Runco RS-900 Series RS1100 Series - page 30

    Installation 14 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qu ick overview of the RS-90 0/RS1100 installation pr ocess. The sections following this one provid e detailed instructions. Installation sh ould be performed by a qualified custom video installation specialist. Table 3-1. In s ta ...

  • Runco RS-900 Series RS1100 Series - page 31

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 15 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensur e the quality of yo ur display. Wh ether you are installing a pr ojector temp orarily or p ermanently, yo u should t ake the follo wing into account to ensure your p rojector per fo ...

  • Runco RS-900 Series RS1100 Series - page 32

    Installation 16 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Throw Distance Throw distance is the dista nce measured fro m the front of the projec tor to the screen. This is an impo rtant calculat ion in an y projecto r installation as it de termines whether or not you have enough roo m to install your projector wit h a des ...

  • Runco RS-900 Series RS1100 Series - page 33

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 17 PRE L IMINAR Y Table 3-4 gives the thr ow ratios for the RS1100 Ultra. RS-900/CineWide or RS1100/CineWide (McKinley Lens) (n/a) 1.40 – 1.65 134.40 158.40 RS-900/CineWide with AutoScope or RS1100/CineWide with AutoScope (McKinley Lens) 1.87 – 2.20 135.76 159.72 1.40 – 1.65 ...

  • Runco RS-900 Series RS1100 Series - page 34

    Installation 18 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Vertical and Horizontal Position Proper placem ent of the proje ctor relative t o the screen wil l yield a rectangu lar, perfectly-cen tered image that complet ely fills the scree n. Ideally, the pro jector should be position ed perpend icular to the sc reen and i ...

  • Runco RS-900 Series RS1100 Series - page 35

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 19 PRE L IMINAR Y Figure 3-4. Horizontal Le n s S hift (Example O nly) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) Screen Width (W) Note: This is a general example of lens shift. Lenses vary in their shift capabili ties. No particular lens or pr ...

  • Runco RS-900 Series RS1100 Series - page 36

    Installation 20 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Table 3-5 li sts the lens shift l imits for each available RS-900/RS11 00 lens, as pe rcentages and absolu te measur ements with a 100 x 56 inch (1.78:1) screen. Table 3-5. Vertical and Horizontal Len s S hift Limit s Len s Option R S -900/ R S 1100 R S 1100 Ultra ...

  • Runco RS-900 Series RS1100 Series - page 37

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 21 PRE L IMINAR Y Folded Optics In rear-screen applications wh ere space be hind the project or is limited, a m irror may be used to fold th e optical path , as shown in Figu re 3-5 . The posit ion of the proj ector and mirror must be accura tely set. If you are con sidering this ...

  • Runco RS-900 Series RS1100 Series - page 38

    Installation 22 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Installing the AutoScope Lens Motor Figure 3-6 shows the RS-900/Cin eWide with Aut oScope or RS1100 /CineWide with AutoScope motor assembly. Figure 3-6. R S -9 00/CineWi de with Auto S cope or R S 1100/CineWide with Auto S cope Motor A ss embly – Exploded View ? ...

  • Runco RS-900 Series RS1100 Series - page 39

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 23 PRE L IMINAR Y Figure 3-7 sh ows the RS1100 Ultra/Cin eWide with AutoScope mo tor assembly. Figure 3-7. R S 1100 Ultra/CineWide with Auto S cope Motor A ss embly – Exploded View Remove Project or Front Heig ht Adju s ter s : Place the proje ctor upside do wn on a b lanket or ...

  • Runco RS-900 Series RS1100 Series - page 40

    Installation 24 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y In s tall Ceiling Mount Adapter s /Projecto r S tand s : For ceiling installations, these brackets brin g the mount ing points for th e projecto r mounting pl ate (included w ith the projecto r ceiling moun t kit) from t he bottom of the pr ojector up and around t ...

  • Runco RS-900 Series RS1100 Series - page 41

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 25 PRE L IMINAR Y In s tall Len s Motor: 1. Position th e AutoScope Lens Motor (item #2) as shown in Figure 3-9 . 2. Line up the moun ting holes on the lens motor housing with those on th e underside of the projecto r. 3. Secure the motor to the projector with t he four (4), suppl ...

  • Runco RS-900 Series RS1100 Series - page 42

    Installation 26 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Installing the Fixed CineWide Base Plate (Prismatic Lens) To install the fixe d CineWide ba se plate on a n RS-900/CineWid e, RS1100/CineWide o r RS1100 Ultra/CineWide with a pri s matic anamorphic lens: 1. Place the projector up side down on a blanket or other so ...

  • Runco RS-900 Series RS1100 Series - page 43

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 27 PRE L IMINAR Y Figure 3-10. Projector with Whitney (Pri s matic ) Len s Ba s e Plate and Ceiling Mounting Plate - Bottom View W ashers under Lens Base Plate (2 places) W ashers between Lens Base Plate and Ceiling Mounting Plate (2 places) R S -900/CineWide or R S 1100/CineWide ...

  • Runco RS-900 Series RS1100 Series - page 44

    Installation 28 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Installing the Fixed CineWide Base Plate (Cylindrical Lens) Figure 3-11 sh ows the cylindr ical (Rainier II/McKinley) lens b ase plate asse mbly for an RS-900/CineWide or RS1100/CineWide. Figure 3-11. R S -900/CineWide or R S 11 00/CineWide with Rainier II/McKinle ...

  • Runco RS-900 Series RS1100 Series - page 45

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 29 PRE L IMINAR Y Figure 3-12 sh ows the RS110 0 Ultra/CineWide cylindrical (Rainier II/ McKinley) lens base plate assemb ly. Figure 3-12. R S 1100 Ultra/Cin eWide wi th Rainie r II/McKinley (Cylindrical) Len s Ba s e Plate and Ceiling Mounti ng Plate - Exploded View Ceiling Mount ...

  • Runco RS-900 Series RS1100 Series - page 46

    Installation 30 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 1. Place the projector up side down on a blanket or other sof t surface. 2. Install a nylon spac er (item #3) at ea ch mounting ho le location. 3. Place the CineWide base p late (item #2) on the botto m of the pr ojector. For a standard RS-900 /CineWide or RS110 0 ...

  • Runco RS-900 Series RS1100 Series - page 47

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 31 PRE L IMINAR Y For a floor in stallation, turn t he four adjustab le feet on the b ottom of th e projector to adjust the projecto r height an d/or projec tion angle. If you do this, you may need to make keystone adjustments or v ertically shift the image using the on-screen dis ...

  • Runco RS-900 Series RS1100 Series - page 48

    Installation 32 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y HDMI/DVI Connection s : See Figure 3-13. With an HDMI s ource, use the in cluded HDMI-to-HDMI ca ble; with a DVI source , use the includ ed DVI-to-HDM I cable. Figure 3-13. HDMI/DVI S ource Conne ction s Use the HDMI inpu t whenever po ssible. This en sures the hi ...

  • Runco RS-900 Series RS1100 Series - page 49

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 33 PRE L IMINAR Y RGB Connection s : Co nnect your per sonal comp uter or other RGB source ( DVD player or HD set top box) to the COMP 2/RGB input; see Figure 3-14 . You can use the included DB15HD-to-5 x BN C cable if your RGB s ource has a 15 -pin, VGA-type conne ctor. Figure 3- ...

  • Runco RS-900 Series RS1100 Series - page 50

    Installation 34 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Compo s ite/ S -Video/Component Video Co nnection s : Use the included ca bles to connect you r composit e, S-Video and component video sources to the RS-9 00/RS1100 as shown in Figure 3-16 . Figure 3-16. Co mpo s ite, S -Video and Component Video Con nection s S- ...

  • Runco RS-900 Series RS1100 Series - page 51

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 35 PRE L IMINAR Y RS-232 Controller Connection Use the communicat ion cable sup plied with th e projector t o connect a P C or home theater control/ automation syste m (if present) to the RS-23 2 port on the RS-900/ RS1100; see Figure 3-17 . For more in formation ab out using this ...

  • Runco RS-900 Series RS1100 Series - page 52

    Installation 36 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Connecting 12-Volt Trigger Output to External Theater Equipment If you are in stalling an RS-900/CineWide with AutoScope , RS1100/Ci neWide with AutoScope or RS1100 Ultra/CineWide with AutoScope , use the ca ble supplied wit h the AutoScope Lens Moto r to connect ...

  • Runco RS-900 Series RS1100 Series - page 53

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 37 PRE L IMINAR Y Connecting to AC Power Projector: The RS-900/RS1 100 ships with various types of AC power cord s. Choose t he one that is appropriate t o your locale. Plug the female end of the p ower cord into th e AC recept acle on the rear of the projector (AC 10 0V ~ 240V). ...

  • Runco RS-900 Series RS1100 Series - page 54

    Installation 38 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 3.8 Primary Lens Adjustments The RS-900/RS11 00 gives you a great deal of cont rol over the picture size, position and focus. Focus and Zoom – RS-900/RS1100 To focus the projected image, gras p the lens b y the oute r ring and ro tate it. To make th e picture sm ...

  • Runco RS-900 Series RS1100 Series - page 55

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 39 PRE L IMINAR Y 3.10 Adjusting the Picture Orientation By default, the RS-900/RS110 0 is config ured for a “floor/front” in stallation, in which the projector is ins talled upright a nd in front o f the screen. If it is installed behind the sc reen and/or mounted on a ceilin ...

  • Runco RS-900 Series RS1100 Series - page 56

    Installation 40 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Cylindrical Anamorphic Lens Installation and Adjustment The Cylindrical Anamorph ic lens mount kit consists of eve rything shown in Figure 3-20. Some compon ents shipped w ith your projec tor may differ slightly from what is shown in these instructions. Figure 3-2 ...

  • Runco RS-900 Series RS1100 Series - page 57

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 41 PRE L IMINAR Y 5. Use the H eight/Y Adjustmen t T-Screws/Was hers (item #3), Pitc h Adjustmen t T-Screws/Wash ers (item #4) and T-Nuts (item #9) to attach the Pitch Adjustm ent Yoke and Lens Adapter Ring t o the Anamorph ic Lens Holder . The Y oke s hould be a s clo s e to the ...

  • Runco RS-900 Series RS1100 Series - page 58

    Installation 42 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 6. Select the Cinema or Virtu al Cinema aspe ct ratio to move the an amorphic lens into position, if it isn’t already. To do this, press CINEMA or VCINE on the RS-900/RS1100 remote con trol ( Figure 2-4 ). Adju s ting the Horizonta l (X) Len s Po s ition: 1. Pro ...

  • Runco RS-900 Series RS1100 Series - page 59

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 43 PRE L IMINAR Y Adju s ting the Pitch (Angle): Next, angle the lens to ev en out any top-to-bottom pincushion disto rtion. To do t his, loosen the Pitch Adjustm ent T-Screws (d irectly below the Height/Y Adjustment T-Scre ws) on eithe r side of the lens to allow it to pivot free ...

  • Runco RS-900 Series RS1100 Series - page 60

    Installation 44 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Once the pr oper lens ang le has been set, firml y tighten the Yaw /X-Adjustmen t Levers to secure the lens in pl ace. Geometry: 1. Input an anamorph ic cross-hatch test patte rn to the projector. 2. Unscrew the Anamorphic Lens just enoug h to allow it to rotate f ...

  • Runco RS-900 Series RS1100 Series - page 61

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 45 PRE L IMINAR Y Whitney (Prismat ic) Anamorphic Lens Installation and Adjustment The Whitney Anam orphic lens mo unt kit consists o f everything shown in Figure 3 -22. Some compone nts shipped with your projector ma y differ slightly from what is shown in these instructions. Fig ...

  • Runco RS-900 Series RS1100 Series - page 62

    Installation 46 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Adju s ting the Len s Height (Y): 1. Project a white f ield on the scre en. 2. Ensure th at the four H eight (Y) Ad justment Sc rews are loos e enough to allow vertica l movement of t he lens assembly. 3. Slowly move t he anamorp hic lens into pl ace so that there ...

  • Runco RS-900 Series RS1100 Series - page 63

    Installation RS-900 and RS1100 Series Inst allation/Operation Manual 47 PRE L IMINAR Y Adju s ting the Yaw: Loosen the Yaw/Z-Adjus tment Knobs to allow the lens t o pivot freely from side to side. Then, an gle the le ns to even out any left -right pincu shion dist ortion: Once the pr oper lens angle has been set , firmly tighte n the Yaw/Z- Adjustm ...

  • Runco RS-900 Series RS1100 Series - page 64

    Installation 48 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco RS-900 Series RS1100 Series - page 65

    RS-900 and RS1100 Series Inst allation/Operation Manual 49 PRE L IMINAR Y 4.1 Selecting Video Memory • Press the CU S T1 or CU S T2 button on the remote con trol to recall settin gs for the cu rrent input from the “Custom 1” or “Custom 2” memory preset. • Press I S F NIGHT to recall settings for the curren t input from t he “ISF Night ...

  • Runco RS-900 Series RS1100 Series - page 66

    Operation 50 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 4.5 Using Picture-In-Picture (PIP) For PIP purpos es, there are tw o groups o f inputs separated by th eir displa y modes: •V i d e o ( S D) group: Video and S-Video inpu ts. • Graphic (HD) group: HDMI 1, HDMI 2, Component 1 and Compo nent 2/RGB inputs. PIP shows ...

  • Runco RS-900 Series RS1100 Series - page 67

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 51 PRE L IMINAR Y Figure 4-1. R S -900/R S 1100 O S D Men u S tructure S etup Lamp Power 170W or 200W Lamp Hours View / Reset Fan Mode Normal, Hi. Alti tude or Manual Speed (if Manu al mode is selected) Background C olor Black, Blue o r Gray PIP On / Off RVR 0, 1, 2 ... 19 12-volt Tr ...

  • Runco RS-900 Series RS1100 Series - page 68

    Operation 52 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Main Menu The Main Menu is the starting point for accessing all project or functions. (You must ente r a passcode to access th e Setup and ISF menus.) Source Select Choose Source Sele ct from the Main Me nu to switch vi deo sources. The active sou rce is indi cated b ...

  • Runco RS-900 Series RS1100 Series - page 69

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 53 PRE L IMINAR Y Picture Memory: For each input , the RS-900/ RS1100 le ts you store p icture qua lity settings as pre sets that yo u can recall at a later time . You can c reate up to four presets per input and resoluti on, to accomm odate ch anging lighting conditions or viewer pr ...

  • Runco RS-900 Series RS1100 Series - page 70

    Operation 54 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Select Brightness from the Pic ture Adjust menu and press ENTER . Adjust the level so that: • The darkest bla ck bars disappea r into the back ground. • The dark gray areas a re barely visible . • The lighter g ray areas are clearly visible. • The white areas ...

  • Runco RS-900 Series RS1100 Series - page 71

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 55 PRE L IMINAR Y Color: On your extern al test pattern so urce, select a color bar pat tern like the on e shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select Color from the Pictur e Adjust menu and press ENTER . While looking ...

  • Runco RS-900 Series RS1100 Series - page 72

    Operation 56 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the im age. To adjust sharpness, select Sharpness from the Picture Adjust menu and press ENTER . On your external test p attern sourc e, select a pa ttern like the one shown in Figure 4-5 . Adj ...

  • Runco RS-900 Series RS1100 Series - page 73

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 57 PRE L IMINAR Y Aspect Ratio To change the aspect ratio (size and shape) of the p rojected im age, select Aspect Rati o from the Ma in Menu an d press ENTER . Selec t the appro priate aspect ratio for you r screen size and the t ype of pro gram mater ial being vie wed, then p ress ...

  • Runco RS-900 Series RS1100 Series - page 74

    Operation 58 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y VirtualWide VWIDE VirtualWide scales a 4:3 image NON-linearly (more on the sides than in the center) to fit a 16:9 screen. On a 2.35:1 screen, the image is centere d between black bars on either side. Cinema CINEMA Select Cine ma to view 2.35 source material in its n ...

  • Runco RS-900 Series RS1100 Series - page 75

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 59 PRE L IMINAR Y Installation To access the Instal lati on adjustments, press MENU , then press the or button to highlight Installation and press ENT ER . The Installation sub- menu appears. Pr ess EXIT to return to the previou s menu or press MENU to close all menus. Language: Pres ...

  • Runco RS-900 Series RS1100 Series - page 76

    Operation 60 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y GeoCorrection: Projector placemen t and other fa ctors can ca use geomet ric distortion in the projecte d image. To c orrect this, se lect GeoCorrection from the Installation menu. Th is sub-menu p rovides the fo llowing option s: • V. Key s tone / H. Key s tone: T ...

  • Runco RS-900 Series RS1100 Series - page 77

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 61 PRE L IMINAR Y • Pincu s hion: “Pincushion” distortion can sometimes occur if the throw dista nce is very short and/or the projector is equipped with an anamorphi c lens (refer to Installing and Adjusting the CineWide Anamorphic Lens in Section 3). To correc t it, select Pin ...

  • Runco RS-900 Series RS1100 Series - page 78

    Operation 62 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Over s can: Overscan pushes the outside edge of the active picture area of th e video signal out beyo nd the edge o f the display area. Some television progr ams are produced based on the assumption that older television sets may not display the o uter edges o f the ...

  • Runco RS-900 Series RS1100 Series - page 79

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 63 PRE L IMINAR Y Information Select Informat ion from the Main Menu to see proje ctor status info rmation: the currently-act ive source, input sign al resolution, asp ect ratio, picture mem ory and lamp usage. This menu also displays the proje ctor serial numbe r. Should you ever ne ...

  • Runco RS-900 Series RS1100 Series - page 80

    Operation 64 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y RVR: Use the RVR co ntrol to incre ase or decr ease the Refle ctance Volume Regulation setting. RVR lets you c ontrol the ap erture or iris size (the physica l opening th rough the lens; similar to a n “f-stop” on a cam era). Doing so allows you t o optimize brig ...

  • Runco RS-900 Series RS1100 Series - page 81

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 65 PRE L IMINAR Y ISF To access the ISF Calibratio n menu, sele ct ISF from th e Main Menu and press ENTER . Use the numb er buttons o n the remot e control to en ter the ISF C alibration menu passcode when prompted and press ENTER again. Then, press MENU on the remote control. Pictu ...

  • Runco RS-900 Series RS1100 Series - page 82

    Operation 66 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Advanced Option s : For more precise contro l over picture quality, select Ad vanced Options from the ISF menu and press ENTER . • Image Enhance: The Image Enhance me nu gives you options for impr oving th e quality of standar d-definition , 480i images. (Fo r 480p ...

  • Runco RS-900 Series RS1100 Series - page 83

    Operation RS-900 and RS1100 Series Inst allation/Operation Manual 67 PRE L IMINAR Y • Advanced Color Enhance (ACE): Use the Advanced Color Enhance (ACE) controls to customize th e stored color space charact eristics. To do t his, use the or button to select a component color (Red, Gree n, Blue, Yellow , Cyan or M agenta). For each compone nt colo ...

  • Runco RS-900 Series RS1100 Series - page 84

    Operation 68 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Changing eithe r or both o f these num bers chang es the hue of the color and relocates the “triangle” f or possible colo rs. For e xample, chang ing the x/y coordinates fo r red moves the color closer to eith er orange or violet, which in tu rn affects a ll disp ...

  • Runco RS-900 Series RS1100 Series - page 85

    RS-900 and RS1100 Series Inst allation/Operation Manual 69 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be repl aced when it reaches the e nd of its lif e (typically 20 00 hours), or sooner if a no ticeable degr adation in b rightness occ urs. Conta ct your Runco dealer to obtain a repl acement lamp. 1. Turn off the proj ector and u nplug th ...

  • Runco RS-900 Series RS1100 Series - page 86

    Maintenance and Troublesh ooting 70 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshootin g problems you may encounter with the RS-900/R S1100. If the suggested solutions fail to resolv e the problem or if you encounte r an issue not de scribed ...

  • Runco RS-900 Series RS1100 Series - page 87

    Maintenance and Troubleshooting RS-900 and RS1100 Series Inst allation/Operation Manual 71 PRE L IMINAR Y LAMP LED ligh ts solid red. • The lamp has failed or exceeded its usage life. • Replace the lam p with a new one. TEMP LED lights solid red. • RS-900/RS1100 internal temperature is too high or one or more fans have failed. • Power off t ...

  • Runco RS-900 Series RS1100 Series - page 88

    Maintenance and Troublesh ooting 72 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y Note s : ...

  • Runco RS-900 Series RS1100 Series - page 89

    RS-900 and RS1100 Series Inst allation/Operation Manual 73 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the RS-900/RS1100 with a home theater automation/control system or a PC running te rminal emula tion software: 1. Connect it to yo ur control system or PC as shown in Figure 3-17 . 2. Star t a terminal session on your ...

  • Runco RS-900 Series RS1100 Series - page 90

    Serial Communications 74 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y X006X Up (arrow key) X007X Down (arrow key) X008X Left (arrow key) X009X Right (arrow key) X011X Show active source and aspe ct ratio information X021X Keypad 1 X022X Keypad 2 X023X Keypad 3 X024X Keypad 4 X025X Keypad 5 X026X Keypad 6 X027X Keypad 7 X028 ...

  • Runco RS-900 Series RS1100 Series - page 91

    Serial Communications RS-900 and RS1100 Series Inst allation/Operation Manual 75 PRE L IMINAR Y X065X Cinema aspect ratio X066X Virtual Cinema aspect ratio X082X Image orientation = floor front X083X Image orientation = ceilin g front X084X Image orientation = floor rear X085X Image orientation = ceiling rear X091X Lamp Power = 170W X092X Lamp Powe ...

  • Runco RS-900 Series RS1100 Series - page 92

    Serial Communications 76 RS-900 and RS1100 Series Installation/Operation Manual PRE L IMINAR Y X180X Blue Image ON X181X Blue Image OFF Table 6-1. S erial Command s (continued) Code Function ...

  • Runco RS-900 Series RS1100 Series - page 93

    RS-900 and RS1100 Series Inst allation/Operation Manual 77 PRE L IMINAR Y 7.1 RS-900/RS1100 Specifications Table 7-1 lists the RS-900 /RS1100 specificat ions. 7. S pecification s Table 7-1. R S -900/R S 1100 S pecification s Projector Type: Digital Light Processi ng (DLP), Single-Ch ip SuperOnyx DMD Native Re s olution: 1920 x 1080 (1 6:9) A s pect ...

  • Runco RS-900 Series RS1100 Series - page 94

    Specifications 78 RS-900 and RS1100 Series Installation/Operation Manual P RELI M INARY Brightne ss and Contra s t: Cin ema S tandard s Mea s urement S y s tem (C S M S ) S pecification s – R S -900 S erie s - Brigh tness*: 13.9 to 19.8 foot-Lamberts (fL) - Cont rast Ratio*: 200:1 to 220:1 Cinema S tandard s Mea s urement S y s tem (C S M S ) S p ...

  • Runco RS-900 Series RS1100 Series - page 95

    Specifications RS-900 and RS1100 Series Inst allation/Operation Manual 79 PRE L IMINAR Y +12V Output: Max. 0.25 Amps, active when Cinema or V irtual Cinema Aspect Ratio is selected (Cin eWide versions only) or wh en projector is turned on; Tip = +12 V; Sleeve = Grou nd Power Requirement s : 100 to 240 VAC (auto-sensing), 50/60 Hz, 290 Watts (989.8 ...

  • Runco RS-900 Series RS1100 Series - page 96

    Specifications 80 RS-900 and RS1100 Series Installation/Operation Manual P RELI M INARY 7.2 Overall Dimensions – RS-900/CineWide and RS1100/CineWide Figure 7-1 shows the RS-900/RS1100 dimensions (all di mensions are in inc hes). Figure 7-1. Overall Dimen s ion s – R S -900/CineWide and R S 1100/CineWide (Pri s matic Len s ) 0 9.8 19.7 6.1 18.7 ...

  • Runco RS-900 Series RS1100 Series - page 97

    Specifications RS-900 and RS1100 Series Inst allation/Operation Manual 81 PRE L IMINAR Y 7.3 Overall Dimensions – RS1100 Ultra Figure 7-2 sh ows the RS1100 Ultra dimensio ns (all dime nsions are in inches). Figure 7-2. Overall Dimen s ion s – R S 1100 Ultra 0 9.8 18.8 14.9 19.7 0 .8 6.3 7.3 .7 .9 .5 5.0 6.8 6.6 9.6 0 2X 1.2 2X 18.5 5.3 14.2 15. ...

  • Runco RS-900 Series RS1100 Series - page 98

    Specifications 82 RS-900 and RS1100 Series Installation/Operation Manual P RELI M INARY 7.4 Overall Dimensions – RS-900/CineWide with AutoScope and RS1100/CineWide with AutoScope Figure 7-3 sh ows the RS-900/RS110 0/CineWide with AutoScope dime nsions (all dimensions are in inches). Figure 7-3. Overall Dimen s ion s – R S -900/CineWide with Aut ...

  • Runco RS-900 Series RS1100 Series - page 99

    Specifications RS-900 and RS1100 Series Inst allation/Operation Manual 83 PRE L IMINAR Y 7.5 Supported Timings Table 7-2 lists the signal types suppo rted by each inp ut on the RS-900/RS110 0. Table 7-2. S upported S ignal Timin g s Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) Analog/Digital PC S Ignal s ...

  • Runco RS-900 Series RS1100 Series - page 100

    Specifications 84 RS-900 and RS1100 Series Installation/Operation Manual P RELI M INARY 1400x1050 1400x1050 60.00 64.744 101.000 60.00 65.317 121.750 75.00 82.278 156.000 1440x900 1440x900 60.00 55.469 88.7 50 60.00 59.935 106.500 75.00 70.635 136.750 85.00 80.430 157.000 1600x1200 1600x1200 60.00 75.000 162.000 1680x1050 1680x1050 60.00 64.674 119 ...

  • Runco RS-900 Series RS1100 Series - page 101

    Specifications RS-900 and RS1100 Series Inst allation/Operation Manual 85 PRE L IMINAR Y S DTV S ignal s (Video / S -Video) NTSC 3.58 – 59.94/60.00 15.734/15.750 3.580 NTSC 4.43 – 59.94/60.00 15.734/15.750 4.430 PAL-B/G – 50.00 15.625 4.430 PAL-M – 59.94/60.00 15 .734/15.750 3.580 PAL-N – 50.00 15.625 3.580 PAL-60 – 59.94/60.00 15.734/1 ...

  • Runco RS-900 Series RS1100 Series - page 102

    Specifications 86 RS-900 and RS1100 Series Installation/Operation Manual P RELI M INARY Note s : ...

  • Runco RS-900 Series RS1100 Series - page 103

    ...

  • Runco RS-900 Series RS1100 Series - page 104

    Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com SERIAL NUMBER 020-0706-03 Rev. A June 2008 ...

Manufacturer Runco Category Home Theater System

Documents that we receive from a manufacturer of a Runco RS-900 Series RS1100 Series can be divided into several groups. They are, among others:
- Runco technical drawings
- RS-900 Series RS1100 Series manuals
- Runco product data sheets
- information booklets
- or energy labels Runco RS-900 Series RS1100 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Runco RS-900 Series RS1100 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Runco RS-900 Series RS1100 Series, service manual, brief instructions and user manuals Runco RS-900 Series RS1100 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Runco RS-900 Series RS1100 Series.

Similar manuals

A complete manual for the device Runco RS-900 Series RS1100 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Runco RS-900 Series RS1100 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Runco RS-900 Series RS1100 Series.

A complete Runco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Runco RS-900 Series RS1100 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Runco RS-900 Series RS1100 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Runco RS-900 Series RS1100 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Runco RS-900 Series RS1100 Series - which should help us in our first steps of using Runco RS-900 Series RS1100 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Runco RS-900 Series RS1100 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Runco RS-900 Series RS1100 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Runco RS-900 Series RS1100 Series?

Use the form below

If you did not solve your problem by using a manual Runco RS-900 Series RS1100 Series, ask a question using the form below. If a user had a similar problem with Runco RS-900 Series RS1100 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)