-
Canon 1100D - page 1
m mt mm.1 mau_ ...
-
Canon 1100D - page 2
Advanced Shooting ThischapterbuitdsonChapter3and introducesmore waystoshootcreatively. Thefirsthalfofthischapterexplainshowtousethe<Tv> <Av> <M> <A-DEP> modes on the Mode Dial. AllthefunctionsexplainedinChapter3canalsobeusedin the <Tv> <Av> and <M> modes. ToseewHchfunctionscanbeusedineachshooting mode, see ...
-
Canon 1100D - page 3
Tv" Action Shots You can either freeze the action or create motion blur with the < Tv > (Shutter-priority AE) mode on the Mode Dial. * <Tv> stands for Time value. Slurred motion Frozen action (Slow shutter speed: 1/30 sec.) (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to <Tv>. Set the desired shutter speed. See "S ...
-
Canon 1100D - page 4
Tv: Action Shots To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If ...
-
Canon 1100D - page 5
Av" Changing the Depth of Field To blur the background or to make everything near and far look sharp, set the Mode Dial to < Av > (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * < Av > stands for Aperture valuewhich is the size of the diaphragm hole inside the lens. Blurred background Sharp foregr ...
-
Canon 1100D - page 6
Av: Changing the Depth of Field i_,,!_ __,_,_ -' _ _ ::_1_i_i, ,_ _ _,_ _ _,_;_,_,,_,_',_ _ _ _ _:_i_ G,i %,_7,_7,_,_,_ When using an aperture with a high f/number, note that camera shake can occur in low light scenes. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 se ...
-
Canon 1100D - page 7
Av: Changing the Depth of Field To obtain a correct flash exposure, the flash output wiii be set automatically to match the set aperture (autoflash exposure). The shutter speed wiii be set automatically between 1/200 sec. - 30 sec. to suit the scene's brightness. in low light, the main subject is exposed with the automatic flash, and the backg ...
-
Canon 1100D - page 8
M- Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * <M> stands for Manual. li <_> <Avr_> + <_> Standard exposure iodax Exposure level mark Set th ...
-
Canon 1100D - page 9
M: Manual Exposure To obtain a correct flash exposure, the flash output will be set automatically (autoflash exposure) to match the manually-set aperture. The flash sync speed can be set from 1/200 sec. to 30 sec. and bulb. Elapsed exposure time A bulb exposure keeps the shutter open for as long as you hold down the shutter button, it can be used t ...
-
Canon 1100D - page 10
A-DEP: Automatic Depth=of=Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * <A-DEP> stands for Auto-Depth of field. This mode sets the depth of field automatically ...
-
Canon 1100D - page 11
E_3 Changing the Metering Mode _ Three methods (metering modes) to measure the subject's brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. Select [Metering mode]. Under the [_:] tab, select [Metering mode], then press <_-_>. Set t.e metering mode. Select ...
-
Canon 1100D - page 12
Setting Exposure Compensation _ Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except <M>). You can set the exposure compensation up to +5 stops in 1/3-stop increments. increased exposure fora brighter image Making it brighter: Hold down the < Avl_> ...
-
Canon 1100D - page 13
Setting Exposure Compensation * Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the flash exposure compensation up to _+2 stops in 1/3-stop increments. ii! Press the <l]_]> button. (4HO) The Quick Control screen will appear (p.40). Select [_]. Press the <_;_> key to select [ ...
-
Canon 1100D - page 14
Auto Exposure Bracketing _ This feature takes exposure compensation a step further by varying the exposure automatically (up to _+2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure AEB amount Darker exposure (Decreased exposure) Bri ...
-
Canon 1100D - page 15
Auto Exposure Bracketing* Follow steps 1 and 2 to turn off the AEB amount display. The AEB setting will also be canceled automatically if the power switch is set to < OFF >, flash recycling is completed, etc. Using AEB with continuous shooting: If <D_j> continuous shooting (p.86) has been set and you press the shutter button completely, ...
-
Canon 1100D - page 16
Locking the Exposure* You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <=X=>button to lock the exposure, then recompose and take the shot. This is called AE (autoexposure) lock. It is effective for bacHit subjects ...
-
Canon 1100D - page 17
=X- Locking the Flash Exposure _ If the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. This is when you should use FE lock. After setting the proper flash exposure for the subject, you can recompose (put the subject toward the side) and shoot. This feature c ...
-
Canon 1100D - page 18
Correcting the Brightness and Contrast Automatically _ If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This feature is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corre ...
-
Canon 1100D - page 19
Correcting the image's Dark Corners Due to the lens characteristics, the four corners of the picture might look darker. This phenomenon is called lens light faIFoff or drop in peripheral Mumination and can be corrected automatically. The defaWt setting is [Enable]. With JPEG images, the correction is done when the image is captured. For RAW im ...
-
Canon 1100D - page 20
Correcting the Image's Dark Corners The camera already contains lens peripheral illumination correction data for about 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera. With EOS Utility (provided software, p.270), you ...
-
Canon 1100D - page 21
,_=~ Customizing image Characteristics _ You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 11 2. Select [Picture Style]. Under the [131:] tab, select [Picture Style], then press <8>. The Picture Style selectio ...
-
Canon 1100D - page 22
_-':- Customizing Image Characteristics* _) Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the [] end. The closer it is to [], the softer the image will look. To make it sharper, set it toward the [] end. The closer it is to [], the sharper the image will look. _) Contrast Adjusts the image contrast and the ...
-
Canon 1100D - page 23
_-'=_ Customizing Image Characteristics* For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page, t_) Filter Effect With a filter effect applied to a monochrome image, you can make write clouds or green trees stand out more. N: None Ye: Yellow Or: Orange R: ...
-
Canon 1100D - page 24
_=~ RegisteringPreferred image Characteristics _ You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as sharpness and contrast are different. You can also adjust the pa ...
-
Canon 1100D - page 25
_,1_ Registering Preferred Image Characteristics* Select a parameter. Select a parameter such as [Sharpness], then press < _-_>. Set the parameter. Press the < _ > key to adjust the parameter as desired, then press < _'_ >, For details, see "Customizing Image Characteristics" on pages 110-112. Press the <MENU> ...
-
Canon 1100D - page 26
WB: Matching the Light Source _ The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the <_]> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <_W>, you can select the white balance to match the light source or ...
-
Canon 1100D - page 27
WB: Matching the Light Source _ Select [Custom White Balance]. Under the [t_:] tab, select [Custom White Balance], then press < 8>. The custom white balance selection screen will appear. import the white balance data. Select the image that was captured in step 1, then press <8>. On the dialog screen which appears, select [OK] and the da ...
-
Canon 1100D - page 28
wB Adjusting the Color Tone for the Light Source _ @/= You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with ...
-
Canon 1100D - page 29
_B Adjusting the Color Tone for the Light Source* With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a bluelamber bias or magentalgreen bias. This is called white balance bracketing (WB-BKT). White bal ...
-
Canon 1100D - page 30
Setting the Color Reproduction Range _ The range of reproducible colors is ca[led the color space. With this camera, you can set the color space to sRGB or Adobe RGB for captured images. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. Select [Color space]. Under the [_:] tab, select [Color space], then pres ...
-
Canon 1100D - page 31
...
-
Canon 1100D - page 32
Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera's LCD monitor. This is called "Live View shooting". Live View shooting is effective for still subjects which do not move, if you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Usi ...
-
Canon 1100D - page 33
Shooting with the LCD Monitor ...... Display the Live View image. Press the <_> button. The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. ;::::: Fooo he sobjeot. When you press the shutter button halfway, the camera will focus with the current AF ...
-
Canon 1100D - page 34
r'_ Shooting with the LCD Monitor Set [Live View shoot.] to [Enable]. In Basic Zone modes, [Live View shoot.] will be displayed under [131"], and in Creative Zone modes, it will be displayed under [t_i]. Battery Life with Live View Shooting [Approx. number of shots] Shooting Conditions Temperature No Flash 50% Flash Use At 23°C / 73°F 2 ...
-
Canon 1100D - page 35
I_ Shooting with the LCD Monitor Each time you press the < DISP. > button, the information display wH[ change. AF mode .............................................................................................. - AF[f_ : Live mode - AF'._ : Face detection Live mode AF_ Quick mode .............. AF point (Quick mode) ............... Ma ...
-
Canon 1100D - page 36
r_ Shooting with the LCD Monitor The finaH image simuHation reflects the effects of the Picture StyHe,white baHance, etc., in the Live View image so you can see what the captured image wHH Hook Hike. During stHH photo shooting, the Live View image wHH automatically reflect the settings Hsted bellow. Final image simulation during Live View shooting ...
-
Canon 1100D - page 37
Shooting Function Settings Function settings particular to Live View shooting are explained here. While the image is displayed on the LCD monitor in Creative Zone modes, pressing the <[_> button will enable you to set the AF mode, drive mode, white balance, Picture Style, Auto Lighting Optimizer, image-recording quality, and ISO speed. In Bas ...
-
Canon 1100D - page 38
[_i _enu FUnCtiOn Settings The menu options below are displayed. In Basic Zone modes, the Live View menu options will be displayed under [t_:], and in Creative Zone modes, they will be displayed under [t_i]. Live View shooting You can set Live View shooting to [Enable] or [Disable]. AF mode You can select [Live mode] (p.128), [_ Live mode] (p.129), ...
-
Canon 1100D - page 39
Changing the Autofocus Mode The AF modes available are [Live mode], [_ Live mode] (face detection, p.129), and [Quick mode] (p.133). if you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.135). Select the AF mode. Under the [_i] tab, select [AF mode]. Select the desired AF mode, ...
-
Canon 1100D - page 40
Changing the Autofocus Mode Focus the subject. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point wiii turn green and the beeper wiii sound. if focus is not achieved, the AF point wiii turn orange. Take the picture. Check the focus and exposure, then press the shutter button completely to ta ...
-
Canon 1100D - page 41
Changing the Autofocus Mode Focus t.e subject. @ Press the shutter button halfway and the camera wiii focus the face covered by the <[ ]> frame. When focus is achieved, the AF point wiii turn green and the beeper wiii sound. if focus is not achieved, the AF point wiii turn orange. @ if a face cannot be detected, the AF point <_> wiii be ...
-
Canon 1100D - page 42
Changing the Autofocus Mode AF operation @ Focusing wiii take slightly longer. Even when focus has been achieved, pressing the shutter button halfway wiil focus again. The image brightness may change during and after the AF operation. if the Hight source changes while the Live View image is displayed, the screen might flicker and focusing may be di ...
-
Canon 1100D - page 43
Changing the Autofocus Mode i iii_i!iii!i_i!iii!i_i!iii!i_i!iii!il :!il i iiiili_i_ Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose b ...
-
Canon 1100D - page 44
Changing the Autofocus Mode The dedicated AF sensor is used to focus in One-Shot AF mode (p.81), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. AF point Magnifying frame Display the Live View image. Press the <r_> ...
-
Canon 1100D - page 45
Changing the Autofocus Mode Focus the subject. Aim the AF points over the subject and press the shutter button halfway. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. When focus is achieved, the AF point which achieved focus will turn green and the Live View image will reappear. If focus is not achi ...
-
Canon 1100D - page 46
MF: Focusing Manually You can magnify the image and focus precisely manually. Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Magnifying frame AE lock Magnified area position Magnification Move the magnifying frame. Press the < _;, > key to move the magnifying frame to the position where you want to ...
-
Canon 1100D - page 47
Live View Shooting Cautions White <_J> and Red <_]l> Internal Temperature Warning icons , If the camera's internal temperature increases due to prolonged Live View shooting or a high ambient temperature, a white <_> icon will appear, if you continue shooting while this icon is displayed, the image quality of still photos may ...
-
Canon 1100D - page 48
Live View Shooting Cautions Shooting Resutt Cautions When you shoot continuously with the Live View function for a tong period, the camera's internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images. Before taking a tong exposure, stop Live View shooting temporarily and wait sever ...
-
Canon 1100D - page 49
...
-
Canon 1100D - page 50
Shooting Movies When you set the Mode Dial to <_,_,>, you can shoot High- Definition (HD) movies. The movie recording format will be MOV. _L_ Cards which can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 "CLASSy" or higher. If you use a slow-writing card when shooting movies, the movie might ...
-
Canon 1100D - page 51
bm,, Shooting Movies When you set the shooting mode to <Din>, you can easily shoot High- Definition (HD) movies with autoexposure. When playing movies, connecting the camera to a TV set is recommended (p.184, 191). ........................................... i_ ........... IL ................. Recording movie Microphone Set the Mode Dial to ...
-
Canon 1100D - page 52
_ Shooting Movies @ @ @ In the movie shooting mode, you cannot take a still photo even if you press the shutter button completely. During movie shooting, do not point the lens toward the sun. The sun's heat can damage the camera's internal components. Cautions for movie shooting are on pages 150 and 151. if necessary, also read the Live V ...
-
Canon 1100D - page 53
"_ Shooting Movies Each time you press the < DISP. > button, the information display wH[ change. Movie shooting mode ........................... Frame rate Movie shooting remaining time/ AF mode ........................................................................... Elapsed time . AFI_IM Live mode - AF _; Face detection ............. ...
-
Canon 1100D - page 54
",_, Shooting Movies The final image simulation reflects the effects of the Picture Style, white balance, etc., in the movie image so you can see what the captured movie will look like. During movie shooting, the movie image will automatically reflect the settings listed below. Final image simulation for movie shooting Picture Style * All para ...
-
Canon 1100D - page 55
Shooting Function Settings Function settings particular to movie shooting are explained here. While the movie image is displayed on the LCD monitor, you can press the <[_> button to enable the following to be set: AF mode, white balance, Picture Style, and Auto Lighting Optimizer. Press the <[_> button. (4H0) The functions settable with ...
-
Canon 1100D - page 56
Menu Function Settings The menu options displayed under the [',_,'], [',_,:], and [',_J] tabs are explained below. [',_,'] tab AF mode The AF modes will be the same as described on pages 128-134. You can select [Live mode], [_ Live mode], or [Quick mode]. Note that continuous focusing of a moving subject is not possibl ...
-
Canon 1100D - page 57
Menu Function Settings D_ShuttedAE lock button You can change the function assigned to the shutter button's halfway position and to the AE lock button. * AF/AE lock: Normal function. Press the shutter button halfway to execute AF. Press the <-)(- > button for AE lock. * AE Iock/AF: Press the shutter button halfway for AE lock. For AF, pr ...
-
Canon 1100D - page 58
Menu Function Settings [',_,:] tab Movie recording size The movie wiii be recorded in [1280x720] High-Definition (HD) quality. You can select the frame rate [1_0] or [[_s] (recorded frames per second) to suit your TV set's video format. * The frame rate is expressed as fps or frames per second. [1_0] : For areas where the TV video format ...
-
Canon 1100D - page 59
Menu Function Settings @ Sound recording When the sound recording is set to [On], sound wiii be recorded by the built-in monaural microphone. The sound recording level wiil be adjusted automatically. An external microphone cannot be used. Metering timer You can change how long the exposure setting is displayed (AE lock time). Grid display With [Gri ...
-
Canon 1100D - page 60
Menu Function Settings [ ' ,_, -" ] tab Exposure compensation You can set exposure compensation for movies up to _+3 stops in 1/3-stop increments. Auto Lighting Optimizer The Auto Lighting Optimizer can be set as explained on page 107. If the [',_,'] menu tab's [_Highlight tone priority] is set to [Enable], the Auto Lightin ...
-
Canon 1100D - page 61
About the Red <H> internal Temperature Warning icon If the camera's internal temperature is high, a blinking red icon <H> may appear. This blinking icon is a warning that the movie shooting will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera's internal temperature decrea ...
-
Canon 1100D - page 62
Movie Shooting Cautions Playback and TV connection If the brightness changes during movie shooting, that part might took momentarily still when you playback the movie. If you connect the camera to a TV set with an HDMI cable (p.191) and shoot a movie, the movie being shot will be displayed at a small size on the TV. But the movie wilt still be prop ...
-
Canon 1100D - page 63
...
-
Canon 1100D - page 64
Handy Features Silencing the Beeper (p.154) Card Reminder (p.154) Setting the Image Review Time (p.154) Setting the Auto Power-off Time (p.155) Adjusting the LCD Monitor Brightness (p.155) Creating and Selecting a Folder (p.156) File Numbering Methods (p.158) Setting Copyright Information (p.160) Auto Rotation of Vertical Images (p.162) Checking Ca ...
-
Canon 1100D - page 65
Handy Features You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [_'] tab, select [Beep], then press < _-_>. Select [Disable], then press <_-_>. iii!i!ii!i i ¸ !i!i!iiiii i !i !a!iiiiiiii! i !i! ia! ii!!i!i!i This prevents shooting if there is no card in the camera. Under the ...
-
Canon 1100D - page 66
Handy Features To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake it up by pressing the shutter button halfway or pressing any of the following buttons: <MENU>, <1_1>, <_>, e ...
-
Canon 1100D - page 67
Handy Features You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder l Select [Select folder]. Under the [_'] tab, select [Select folder], then press < _-_>. , Se,eot [Createfo der]. Select [Create fo ...
-
Canon 1100D - page 68
Handy Features Selecting a Folder Lowest file number Number of images in folder Folder name With the folder selection screen displayed, select a folder and press < _'_ >. The folder where the captured images will be saved is selected, Subsequent captured images will be recorded into the selected folder, Highest file number About Folders ...
-
Canon 1100D - page 69
Handy Features The image files wiii be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number wiii appear on your computer in this format: IMG O001.JPG. Under the [_"] tab, select [File numbering], then press <8>. The available settings are des ...
-
Canon 1100D - page 70
Handy Features i iii_i!iii!i_i!iii!i_i!iii!i_i!i!i! !!iiii!iiiiiii!iiiiiii!iiii!iiii!iiii!!iii_i [Auto reset]: The file numbering is reset to 0001 whenever you replace the card or create a folder. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according t ...
-
Canon 1100D - page 71
Handy Features When you set the copyright information, it will be appended to the image as Exif information. Select [Copyright information]. Under the [_] tab, select [Copyright information], then press <8>. Select the option to be set. Select [Enter author's name] or [Enter copyright details], then press <8 > . The text entry scre ...
-
Canon 1100D - page 72
Handy Features Text Entry Procedure Changing the entry area: Press the < [] > button to toggle between the top and bottom entry areas. Moving the cursor: Press the <4_> key to move the cursor. Entering text: In the bottom area, press the <,;,> key or turn the <_> dial to select a character, then press <_-_> to enter it ...
-
Canon 1100D - page 73
Handy Features Vertical images are rotated automatically so they are displayed vertically on the camera's LCD monitor and on the personal computer instead of horizontally. The setting of this feature can be changed. Under the [_"] tab, select [Auto rotate], then press < _ >. The available settings are described below. Select one, th ...
-
Canon 1100D - page 74
Handy Features While the menu is displayed, press the <DISP.> button to display the camera's major function settings. While the menu is displayed, press the <DISP.> button to display the settings. Press the <DISP.> button again to return to the menu. Settings display remaining capacity correction (p.117)/ WB bracketing (p.118 ...
-
Canon 1100D - page 75
Handy Features The camera's shooting settings and menu settings can be reverted to the default. This can be done in Creative Zone modes. ' Select [Clear settings]. Under the [_] tab, select [Clear settings], then press < _-_>. Select [Clear all camera settings]. Select [Clear all camera settings], then press <_-_>. Select [OK] ...
-
Canon 1100D - page 76
Handy Features Shooting Settings One-Shot AF Automatic selection [] (Single shooting) E_]] (Evaluative metering) AUTO (Auto) Max.: 3200 Canceled 0 (Zero) Unchanged Camera Settings 30 sec. Enable Enable 2 sec. Brightness (10 images) On_l Shutter button Unchanged Unchanged Enable Unchanged Disable Disable Unchanged Live View Shooting Settings Enable ...
-
Canon 1100D - page 77
Handy Features ........................... .................................................... The shooting settings display (p.46) can be turned on or off by pressing the shutter button halfway. Under the [_:] tab, select [LCD off/on btn], then press <_-_>. The available settings are described below. Select one, then press <_-_>. [Shu ...
-
Canon 1100D - page 78
Setting the Flash _ The built-in flash and external Speedlite settings can be set with the camera's menu. You can use the camera's menu to set the external Speedlite function settings only if the attached EX-series Speedlite is compatible with this function. The setting procedure is the same as setting a camera menu function. Select [Flas ...
-
Canon 1100D - page 79
Setting the Flash _ [Built=in flash func. setting] and [External flash func. setting] Settable Functions E-TTL 11 (Fixed) © 168 © 169 -- I © -- © 102 © 169 -- © -- -- © -- * Regarding [FEB] (Flash exposure bracketing), [Zoom], and [Wireless set.], refer to the Speedlite's instruction manual. Flash mode With an external Speedfite, you ca ...
-
Canon 1100D - page 80
Setting the Flash _ Shutter sync. Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. If [2nd curtain] is set, the flash will fire right before the exposure ends. When this is combined with a slow sync speed, you can create a trail of light such as from car headlights at night. With 2nd-curtain sync, a ...
-
Canon 1100D - page 81
Setting the Flash* The Custom Functions displayed under [External flash C.Fn setting] will vary depending on the Speedlite model. Display the Custom Function. Select [External flash C.Fn setting], then press <_-_>. Set the Custom Function. Press the < 4_ > key to select the function number, then set the function. The procedure is the sa ...
-
Canon 1100D - page 82
Appending Dust Delete Data* Dust entering the camera can adhere to the image sensor and cause dust spots to be visible on the captured images. To erase these dust spots, you can append the Dust Delete Data to the images. The Dust Delete Data is used by Digital Photo Professional (provided software, p.270) to erase the dust spots automatically. Get ...
-
Canon 1100D - page 83
Appending Dust Delete Data* [3 [3 B D B [3 [3 [3 Photograph a solid=white object. At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in aperture- priority AE mode at an aperture of f/22. Since the image will not be saved, the data can still be ...
-
Canon 1100D - page 84
Manual Sensor Cleaning _ if dust adhere to the image sensor and dust spots appear on the images, you can clean the image sensor yourself with a camera blower. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach ...
-
Canon 1100D - page 85
Manual Sensor Cleaning* While cleaning the sensor, never do any of the following, if the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. * Setting the power switch to <OFF>. * Opening the card/battery compartment cover. , The surface of the image sensor is extremely delicate. Clean the sen ...
-
Canon 1100D - page 86
image Playback This chapter explains features related to viewing photos and movies, going into more detail than in Chapter 2 "Basic Shooting and Image Playback." Here you will find explanations about how to playback and erase photos and movies with the camera and viewing them on a TV set. About images taken with another camera: The camera ...
-
Canon 1100D - page 87
[] Searching for images Quickly Search for images quickly with the index display showing four or nine images on one screen. Playback the image. When you press the < [] > button, the last image captured will be displayed. Switch to the index display. Press the <[].(_> button. The 4-image index display will appear. The currently-selected ...
-
Canon 1100D - page 88
[] Searching for Images Quickly With the single image display, you can turn the <_> dial to jump through the images forward or back according to the jump method that was set. Jump method Playback position Select [image jump w/_¢_]. Under the [_:] tab, select [Image jump w/_], then press <8>. Se]eot the jump met.od Press the < ,;_> ...
-
Canon 1100D - page 89
/ _ Magnified View You can magnify a shot image by 1.5x to 10x on the LCD monitor. Magnified area position Magnify the image. During image playback, press the < _ > button. The image will be magnified. If you hold down the < _ > button, the image will be magnified until it reaches the maximum magnification. Press the <[].Q> button ...
-
Canon 1100D - page 90
@ Rotating the image You can rotate the displayed image to the desired orientation. Select [Rotate]. Under the [_'] tab, select [Rotate], then press <_-_>. :iii!!: Select an image. Press the <_> key to select the image to be rotated. You can also select an image on the index display (p.176). Rotate the image. Each time you press &l ...
-
Canon 1100D - page 91
Setting Ratings You can rate images and movies with one of five rating marks: I--3t1-*-3t [:JI[:*]l[:*:]. , Seleot [Rati.g:]. Under the [_:] tab, select [Rating], then press <_-_>. Select an image or movie. Press the < _ > key to select the image or movie to be rated. You can display three images by pressing the <_._> button. To r ...
-
Canon 1100D - page 92
Setting Ratings L_ The number next to the rating marks ([,31[**]1[***]1[***]/[*****]) can only go up to 999. If there are 1,000 or more images for a rating, [###] will be displayed. Taking advantage of ratings With the [3: Image jump w/_] option, you can display only the rated images and movies. , With the [3: Slide show] option, you can playback o ...
-
Canon 1100D - page 93
[] Quick Control During Playback When you press the <[]> button during image playback, you can set the following: [o_ Protect images, __ Rotate, _ Rating, .._ Image jump w/_]. Note that movies cannot be rotated (__ Rotate). Press the < [] > button. During image playback, press the < [] > button. The functions settable with Quick C ...
-
Canon 1100D - page 94
[] Quick Control During Playback Pressing the <[]_]> button during the index display will switch to the single-image display and the Quick Control icons will appear. Pressing the <_]> button again will return to the index display. For images taken with another camera, selectable functions may be limited. 183 ...
-
Canon 1100D - page 95
Enjoying Movies Basically, you can playback movies in the following three ways: p,91> An HDMI cable (sold separately) is necessary to connect the camera to a TV set. The TV set must also have an HDMI terminal, When the camera is connected to a TV [_ _--_ _- " - " set with an HDMI cable, you can playback movies and still photos on the T ...
-
Canon 1100D - page 96
_,;l, Enjoying Movies You can playback movies on the camera's LCD monitor. You can also edit out the movie's first and last scenes, and playback the images and movies in the card in an automatic slide show. _J_ A movie edited with a personal computer cannot be rewritten to the card and played back with the camera. (See the PDF file instru ...
-
Canon 1100D - page 97
Playing Movies P|ayback the image. Press the <l_q> button to display images. Speaker Select a movie. Press the <41_> key to select a movie. On the single-image display, the <_,_=, _ii> icon displayed on the upper left indicates a movie. On the index display, the perforation on the left edge of the image indicates a movie. As movie ...
-
Canon 1100D - page 98
",_, Playing Movies Function Playback Description Exit Returns to the single-image display. Play Pressing <C)> toggles between play and stop. Adjust the slow motion speed by pressing the < 4_ > I_- Slow motion key. The slow-motion speed is indicated on the upper right. First frame Displays the movie's first frame. Each time yo ...
-
Canon 1100D - page 99
Editing a Movie's First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. On the movie playback screen, select [_]. The editing screen will be displayed. Specify the part to be edited out. Select either [_] (Cut beginning) or [_] (Cut end), then press <8>. Press the <41_> key to see the pre ...
-
Canon 1100D - page 100
Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. Select [Slide show]. Under the [_:] tab, select [Slide show], then press <_-_>. Number of,mo0e, to be p,ayed Select the images to be played. Press the <AT> key to select the desired option, then press <_-_>. [All imageslMovieslStills] Pr ...
-
Canon 1100D - page 101
Slide Show (Auto Playback) [Display time] Set [Set up] as desired. Press the <AT> key to select [Set up], then press <_-_>. Set the [Display time] (still photos), [Repeat], and [Transition effect]. Then press the <MENU> button. [Repeat] [Transition effect] Start the slide show. Press the < AT > key to select [Start], then pr ...
-
Canon 1100D - page 102
Playback on a High=Definition TV An HDMI cable (sold separately) is necessary to connect the camera to a TV set. The TV set must also have an HDMI terminal. When the camera is connected to a TV set with an HDMI cable, you can playback movies and still photos on the TV set. If you use a High- Definition TV set to playback High-Definition (HD) movies ...
-
Canon 1100D - page 103
Playback on a High-Definition TV 2; ¸ Press the <[_> button. The image wiii appear on the TV screen (Nothing will be displayed on the camera's LCD monitor). The images will automatically be displayed at the TV's optimum resolution. By pressing the <DISP.> button, you can change the display format. To playback movies, see page ...
-
Canon 1100D - page 104
Playback on a High-Definition TV st, ..oto .toyboo, moo,, Movie playback menu • Return _ • 9-image index • Play movie • Slide show DISP, • Disp. shooting info @ • Rotate Press the camera's <r_> button. An image will appear on the TV screen and you can use the TV's remote control to playback images. Select an image or mov ...
-
Canon 1100D - page 105
] Protecting images Protecting an image prevents it from being erased accidentally. Select [Protect images]. Under the [_'] tab, select [Protect images], then press <8>. The protect setting screen will appear. Select [Select images]. Select [Select images], then press < _'_ >. ,maoe proteot ,ooo Protect the image. Press the &l ...
-
Canon 1100D - page 106
[] Protecting Images You can protect all the images in a folder or card at one time. When you select [All images in folder] or [All images on card] in [3" Protect images], all the images in the folder or card will be protected. To cancel the image protection, select [Unprotect all images in folder] or [Unprotect all images on card]. if you for ...
-
Canon 1100D - page 107
Erasing images You can either select and erase images one by one or erase them in one batch. Protected images (p.194) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a Iff_+_ L image will e ...
-
Canon 1100D - page 108
Erasing Images Select [Select and erase images]. Select [Select and erase images], then press <_>. The images will be displayed. To display the three-image display, press the < []._ > button. To return to the single-image display, press the < ¢, > button. Select the images to be erased. Press the <41_> key to select the ima ...
-
Canon 1100D - page 109
DISR Shooting Information Display Exposure compensation amount ............. Flash exposure compensation amount Aperture Shutter speed Metering mode Shooting mode ................. Protect .................. Rating Folder number - File number Histogram (Brightness/RGB) White balance Image-recording quality Playback number/ Total images recorded spa ...
-
Canon 1100D - page 110
DISR Shooting Information Display Shooting mode .... ambience effects .... Lighting or scene * For images taken in Basic Zone modes, the information displayed may differ depending on the shooting mode. * Photos taken in the <_> mode will show [Background blur]. Shooting time ....................... Movie shooting mode Recording file size syst ...
-
Canon 1100D - page 111
DISP. Shooting Information Display About the Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. About the Histogram The brightness histogram shows the exposure level distri ...
-
Canon 1100D - page 112
CANON iNC. 30-2, Shimomamko 3-chome, Ohta-ku, Tokyo t46-850t, Japan USA -- CANON U.S.A. iNC. One Canon Plaza, Lake Success, NY 11042-1198, U.SA. For all inquires concerning this product, call to}l free in the U S 1-800-OK-CANON CANADA -- CANON CANADA _NC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario LST 1P7, Canada CANON CANADA _NC. MONTREAL ...
Do you have a question concerning Canon 1100D?
Use the form below
If you did not solve your problem by using a manual Canon 1100D, ask a question using the form below. If a user had a similar problem with Canon 1100D it is likely that he will want to share the way to solve it.