Manual Eizo FlexScan F35

58 pages 0.97 mb
Download

Go to site of 58

Summary
  • Eizo FlexScan F35 - page 1

    User’ s Man ual F l ex S c an â F 35/FX·B5 Color Display Monitor English Bedienungsanleitung Manuel d’utilisation Farbmonitor Moniteur Couleur Deutsch Français ...

  • Eizo FlexScan F35 - page 2

    2 CONTENTS CONTENTS PRECA UTIONS i INTRODUCTION 5 About This Manual ............................................... 5 P ackage Contents ............................................... 5 1 FEA TURES 6 Features .............................................................. 6 Functions ............................................................. 7 2 ...

  • Eizo FlexScan F35 - page 3

    3 E CONTENTS 5 O THER SETTINGS 20 - Others, Information and Language menus - Degaussing ....................................................... 20 Beep .................................................................. 21 Menu P osition, Menu Contrast .......................... 2 1 Reset ............................................................. ...

  • Eizo FlexScan F35 - page 4

    4 CONTENTS Copyright© 2000 by EIZO NANAO CORPORA TION. All rights reser ved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of Eizo Nanao Corporation. Eizo Nanao Corporation is under no obligation to hold ...

  • Eizo FlexScan F35 - page 5

    F D PRECA UTIONS SICHERHEITSHINWEISE i PRECA UTIONS PRECA UTIONS SICHERHEITSHINWEISE PRÉCA UTIONS ...

  • Eizo FlexScan F35 - page 6

    PRECA UTIONS E ii PRECAUTIONS Location of the caution state- ments Jordet stikkontakt skal ben yttes når apparatet tilkob les datanett. Apparaten skall anslutas till jordat nätuttag. The equipment must be connected to a grounded main outlet. IMPOR T ANT! T o ensure personal safety and proper maintenance. Please read this section and the caution s ...

  • Eizo FlexScan F35 - page 7

    F D PRECA UTIONS SICHERHEITSHINWEISE iii PRECA UTIONS Emplacement de l’étiquette de sécurité P osition des W arnhinweis- A ufkleber s WICHTIG! Zu Ihrer eigenen Sicherheit und um ordn ungsmäße Handhabung Ihres Systems zu gewährleisten, sollten Sie unbedingt diesen Abschnitt und die W arnhinweise auf Ihrem Monitor lesen (siehe obige Abbildung ...

  • Eizo FlexScan F35 - page 8

    PRECA UTIONS E iv PRECAUTIONS W ARNING • If the monitor begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer f or advice. Attempting to use a malfunctioning monitor can be dangerous. • Do not dismantle the cabinet or modify the monitor . Dismantling ...

  • Eizo FlexScan F35 - page 9

    F D PRECA UTIONS SICHERHEITSHINWEISE v PRECA UTIONS W ARNUNG • T ritt Rauc h aus dem Monitor aus oder werden unge wöhnliche Geräusche oder Gerüche wahrgenommen, sind umgehend sämtliche Netzverbindungen zu lösen. W enden Sie sich in diesem Fall an Ihren Händler . Der Einsatz eines defekten Monitors kann gefährlich sein. • Gehäuse keinesf ...

  • Eizo FlexScan F35 - page 10

    PRECA UTIONS E vi PRECAUTIONS • Place the monitor on a strong, stable surface. A unit placed on an inadequate surface may fall, resulting in injury or equipment damage. If the monitor falls, disconnect the power immediately and have the unit checked by a qualified service engineer before using it again. Using a monitor after it has been dropped m ...

  • Eizo FlexScan F35 - page 11

    F D PRECA UTIONS SICHERHEITSHINWEISE vii PRECA UTIONS • Stellen Sie den Monitor auf eine stabile ebene Flä che . Wird das Gerät nicht ordnungsgemäß aufgestellt, kann es herunterfallen und jemanden verletzen bzw . selbst beschädigt werden. Nach einem Sturz muß der Monitor umgehend vom Netz getrennt und vor dem nächsten Einsatz durch einen F ...

  • Eizo FlexScan F35 - page 12

    PRECA UTIONS E viii PRECAUTIONS • Use the enclosed po wer cord. If using the power cor d other than the enclosed one, use the follo wing cord. In USA and Canada: * Rating: min. 125 V , 10 A * Length: max. 2.1 m * T ype: SVT * Plug type: NEMA 5-15P , Parallel blade, Grounding type, 125 V , 10 A In Europe: * Rati ng: min. 250 V , 10 A * Length: max ...

  • Eizo FlexScan F35 - page 13

    F D PRECA UTIONS SICHERHEITSHINWEISE ix PRECA UTIONS • V erwenden Sie das mitgelieferte Netzkabel. Bei Einsatz anderer Netzkabel sind folgende Spezifikationen einzuhalten. In den V er einigten Staaten und Kanada: * Leistung: min. 125 V , 10 A * Länge: max. 2,1 m * T yp: SVT * Steckertyp: NEMA 5-15P , Parallel- Flachstift, Erdungstyp, 125 V , 10 ...

  • Eizo FlexScan F35 - page 14

    PRECA UTIONS E x PRECAUTIONS • T o disconnect the po wer cord, grasp the plug firmly and pull. Never tug on the cord, doing so may cause damage and could result in fire or electric shock. OK ...

  • Eizo FlexScan F35 - page 15

    F D PRECA UTIONS SICHERHEITSHINWEISE xi PRECA UTIONS • Zum Lö sen der Netzverbindung Netzstecker fest greif en und aus der W andsteckdose ziehen. Niemals ruckartig am Netzkabel ziehen, da das Kabel hierdurch beschädigt werden könnte, was wiederum mit Brand- oder Stromschlaggefahr verbunden ist. • P our d é brancher le c â ble secteur , tir ...

  • Eizo FlexScan F35 - page 16

    PRECA UTIONS E xii PRECAUTIONS CA UTION Be careful when taking the monitor out of the car ton: • Disconnect the power cor d, signal cables and remove the optional i· Sound ä ä ä ä ä sound unit and i · Station ä ä ä ä ä USB hub (if applicable) when moving the monitor . Moving the monitor with the cord attached or lifting it by the i·S ...

  • Eizo FlexScan F35 - page 17

    F D PRECA UTIONS SICHERHEITSHINWEISE xiii PRECA UTIONS A CHTUNG Beim Herausheben des Monitor s aus dem V erpac kungskar ton ist f olg endes zu beac hten: • Lö sen Sie vor dem T ranspor t des Monitors das Netzkabel und die Signalkabel, und entfernen Sie das optionale i · Sound Ô Ô Ô Ô Ô - Lautsprecher system sowie den i · Station Ô Ô Ô ...

  • Eizo FlexScan F35 - page 18

    PRECA UTIONS E xiv PRECAUTIONS • Do not sit on the cabinet or place any heavy objects on the cabinet. A unit with heavy objects on it may fall or be damaged and result in injury . • Do not block the ventilation slots on the cabinet. * Do not place books or any other papers on the ventilation slots. * Do not install the monitor in a closed space ...

  • Eizo FlexScan F35 - page 19

    F D PRECA UTIONS SICHERHEITSHINWEISE xv PRECA UTIONS • Nicht auf das Geh ä use setzen und keine schweren Gegenst ä nde darauflegen. Ein Monitor , auf dem schwere Gegenstände abgelegt werden, kann herunterfallen oder beschädigt werden. Hierbei besteht V erletzungsgefahr . • V erdec ken Sie keinesfalls die Lü ftungsschlitze des Geh ä uses. ...

  • Eizo FlexScan F35 - page 20

    PRECA UTIONS E xvi PRECAUTIONS • Unplug the monitor before c leaning it. Cleaning the monitor while it is plugged into a power outlet may result in electric shock. For user s of the EIZO optional i · Sound ä ä ä ä ä sound unit and i · Station ä ä ä ä ä USB hub • When adjusting the viewing angle of the monitor , do not do so b y hand ...

  • Eizo FlexScan F35 - page 21

    F D PRECA UTIONS SICHERHEITSHINWEISE xvii PRECA UTIONS • Ziehen Sie v or dem Reinigen des Monitors den Netzstec ker . Ist der Monitor während der Reinigung mit der W andsteckdose verbunden, besteht Stromschlaggefahr . Fü r Ben utz er des optionalen i· Sound Ô - Lautsprec her systems und des i · Station Ô -USB-Hubs: • Fassen Sie den Monito ...

  • Eizo FlexScan F35 - page 22

    PRECA UTIONS E xviii PRECAUTIONS IMPOR T ANT! * This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.e. picture geometry , picture positioning and color convergence and purity in the case of color monitors) is optimally adjusted to the earth's magnetic field of ...

  • Eizo FlexScan F35 - page 23

    F D PRECA UTIONS SICHERHEITSHINWEISE xix PRECA UTIONS WICHTIG! * Dieses Produkt wurde werkseitig speziell für den Einsatz am vorgesehenen Bestimmungsort konfiguriert. Die Monitorleistung (d. h. Bildgeometrie, Bildposition sowie Farbkonvergenz und Farbreinheit bei Farbmonitoren) ist optimal auf das Magnetfeld der Erde am Einsatzort abgestimmt. Wird ...

  • Eizo FlexScan F35 - page 24

    PRECA UTIONS E xx PRECAUTIONS ...

  • Eizo FlexScan F35 - page 25

    E 5 INTROD UCTION INTR ODUCTION About This Manual This manual explains the precautions, features, specifications, and operation of your EIZO monitor . The separately bound 'Quick Setup Guide' explains how to install your monitor , and how to implement basic adjustments with the ScreenManager utility . Package Contents: • Monitor ....... ...

  • Eizo FlexScan F35 - page 26

    6 1 FEA TURES 1 FEA TURES Features FlexScan ® f or wide compatibility • 27 to 70 kHz horizontal scanning, 50 to 120 Hz vertical scanning with automatic adjustment. • The built-in microprocessor allows user -adjustable color control adjustments to control screen distortion, and memorization of user - adjusted settings. • High resolution 1024 ...

  • Eizo FlexScan F35 - page 27

    E 7 1 FEA TURES 1) As an ENERGY ST AR Partner, EIZO NANA O CORPORA TION has determined that this product meets the ENERGY ST AR guidelines for energy efficiency . Functions Windows 95/98 Plug & Pla y .... Readme .txt in the EIZO Utility Disk • This model complies with VESA DDC1/DDC2B standards and supports the Plug & Play function propose ...

  • Eizo FlexScan F35 - page 28

    8 2 IMAGING ADJUSTMENT 2 IMA GING ADJUSTMENT - Screen menu - All of the icons shown in the ScreenManager 'Screen' menu are described below . • Allow the monitor to stabiliz e for at least 30 min utes before making image adjustments. Brightness, Contrast, Size, P osition These functions are used to adjust the brightness, contrast, size a ...

  • Eizo FlexScan F35 - page 29

    E 9 2 IMAGING ADJUSTMENT Moir é Reduction What is moir é ? Moir é refers to an interference pattern of dark wavy lines on the screen. It is not a defect, but rather an interference phenomenon caused by the relationship between the phosphor layout and the imaging signal. Moir é is often an indication of a good focus level. Moir é is particularl ...

  • Eizo FlexScan F35 - page 30

    10 3 COLOR ADJUSTMENT 3 COLOR ADJUSTMENT - Color menu - Outline EIZO monitors have incorporated two color adjustment mode, standard and custom. The “ Standard ” mode allows the adjustment of the color spectrum. The “ Custom ” mode allows extensive controls over the colors of the displayed image on the screen. All adjustments for either mode ...

  • Eizo FlexScan F35 - page 31

    E 11 3 COLOR ADJUSTMENT Adjusting the Standard mode • Users should allow at least 30 min utes for the monitor to stabilize bef ore setting the color adjustments or color matching. Pr ocedure 1) Go to the 'Color' menu. 2) Select the “ Standard mode ” setting from the 'Color mode' menu. 3) Select the 'T emperature' ...

  • Eizo FlexScan F35 - page 32

    12 3 COLOR ADJUSTMENT Adjusting the Custom mode Cutoff and Gain adjustments Monitors use red, green and blue (R, G, and B) to convey color information. They use an additive method to combine different amounts of the primary colors to produce a desired color . In other words, monitors start with no light (black) and add percentages of red, green and ...

  • Eizo FlexScan F35 - page 33

    E 13 3 COLOR ADJUSTMENT a) Select the 'T emperature' icon from the sub menu. b) Select the temperature as desired by moving the arrow keys in any direction. 4) Adjust the Cutoff Cutoff The Cutoff adjustment is the most powerful adjustment. It alters the starting point (the black level) and the ending point (the white level). If the Cutoff ...

  • Eizo FlexScan F35 - page 34

    14 3 COLOR ADJUSTMENT • These diagram e xplains how the color curves w ere changed for the best adjustment in steps 4 and 5. What is the relation between the color and the brightness adjustment? Brightness uniformly adjusts the amount of light output for the entire screen and its background. If it is increases too high the background will become ...

  • Eizo FlexScan F35 - page 35

    E 15 4 POWER-SA VE SETUP 4 PO WER-SA VE SETUP - P owerManager menu - What is PowerManager? The PowerManager feature automatically reduces the monitor ’ s power consumption during idle periods, in accordance with the PCs ScreenSaver software. There are two PowerSaving modes in the EIZO PowerManager: Mode 1 and Mode 2 (maximum reduction). Even if t ...

  • Eizo FlexScan F35 - page 36

    16 4 PO WER-SA VE SETUP Set-up Procedure Set the monitor ’ s power -save envir onment to match the PC ’ s ScreenSaver software. • F or the PC setup , please refer to the user ’ s man uals for the PC and gr aphics board. There are two power -save settings for the monitor . ‘ VESA DPMS ’ system works with the VESA DPMS signal. ‘ NUTEK ? ...

  • Eizo FlexScan F35 - page 37

    E 17 4 POWER-SA VE SETUP VESA DPMS System 1) First, make the appropriate settings for the PC. 2) Then select ‘ VESA DPMS ’ . 3) Set the delay period, which is the interval that the monitor will wait after receiving a power -save signal from the PC, before entering into Mode 1 or Mode 2. VESA DPMS power -saving method VESA DPMS utilizes four sig ...

  • Eizo FlexScan F35 - page 38

    18 4 PO WER-SA VE SETUP NUTEK System 1) First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC. 2) Then select ‘ NUTEK ’ . 3) Set the delay time, which is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time that the monitor enters Mode 1. 4) Set the Mode 1 durati ...

  • Eizo FlexScan F35 - page 39

    E 19 4 POWER-SA VE SETUP What is VESA DPMS? The acronym VESA stands for “ V ideo Electronics Standards Association, ” and DPMS stands for “ Display Power Management Signaling. ” DPMS is a communication standard that PCs and graphics boards use to implement power savings at the monitor side. What is NUTEK? NUTEK is the acronym for the “ Sw ...

  • Eizo FlexScan F35 - page 40

    20 5 OTHER SETTINGS 5 O THER SETTINGS - Others, Information and Langua ge menus - All of the icons shown in the ScreenManager 'Others' menu are described below . Degaussing The monitor automatically degausses every time the power is turned ON and every time it is reactivated from the PowerManager power -saving Mode 2. A degaussing functio ...

  • Eizo FlexScan F35 - page 41

    E 21 5 OTHER SETTINGS Beep Use this feature to set the beeper ON or OFF . If the beeper is ON, the monitor will generate beep signals as shown below . If the beeper is OFF , the monitor will not beep. Short beep • ScreenManager item selected. • ScreenManager parameter adjusted to minimum or maximum limit. Long beep • AUTO-SIZING button presse ...

  • Eizo FlexScan F35 - page 42

    22 5 OTHER SETTINGS Information status report Use this feature to review the current ScreenManager settings. The menu contains four pages. Pressing the ENTER key selects the different pages in order . The infor mation displayed on each page is as follows. • Page 1: Input port, horizontal and vertical frequencies, moir é reduction setting • Pag ...

  • Eizo FlexScan F35 - page 43

    E 23 6 GE TTIN G TH5 MOST FROM Y OUR MONITO R Adjustment Lock The ScreenManager operation can be disabled by holding down the AUTO-SIZING button while switching on the monitor ’ s power . This will disable ( “ lock ” ) the ScreenManager and AUTO-SIZING button, protecting from accidental changes. T o unlock the buttons: switch the power off, t ...

  • Eizo FlexScan F35 - page 44

    24 7 TROUBLESHOO TING 7 TR OUBLESHOO TING T roub leshooting This page presents problems that can be corrected by the user . If a problem persists even after applying the suggested remedies, contact an EIZO dealer . P oints to chec k with possible solutions • Check that the power cord is correctly connected. • T r y pressing a key on the keyboar ...

  • Eizo FlexScan F35 - page 45

    E 25 7 TROUBLESHOOTING • Use the graphics board ’ s utility software to change the frequency setting. (Refer to the manual of the graphics board.) • Whenever an error signal message appears, the signal frequency will be displayed in red. • Press the AUTO-SIZING button on the front panel. See Quick Setup Guide, page 8. • Adjust the image s ...

  • Eizo FlexScan F35 - page 46

    26 7 TROUBLESHOO TING • If the volume level of the EIZO optional i · Sound speaker is too high, it may , in some cases, cause a slight vibration. T o eliminate, turn down the volume of the speaker . • Flicker will occur with interlaced scanning, or non-interlaced scanning with a low refresh rate. All EIZO monitors are capable of reproducing hi ...

  • Eizo FlexScan F35 - page 47

    E 27 7 TROUBLESHOOTING • The CRT is not warmed up. Allow 30 minutes for the monitor to stabilize. • Allow 30 minutes for the monitor to warm up. • Degauss the screen. (Use the degaussing feature in the ScreenManager ’ s 'Others' menu. See page 22.) • The monitor emits a humming noise when executing automatic degaussing at power ...

  • Eizo FlexScan F35 - page 48

    28 7 TROUBLESHOO TING • The Auto-sizing function is intended for use on the Macintosh and on IBM compatibles running Windows. It may not work properly if either of the following applies. - Y ou are running an A T -compatible PC on MS-DOS (not Windows). - The background color for the “wallpaper” or “desktop” pattern is set to black. • So ...

  • Eizo FlexScan F35 - page 49

    E 29 8 CLEANING 8 CLEANING W ARNING • Keep liquids a way fr om the monitor . Spillage into the cabinet ma y result in fire, electric shock, or equipment damage. If an object or liquid f alls/spills into the cabinet, unplug the monitor immediately . Ha ve the unit chec ked b y a qualified ser vice engineer bef ore using it again. Using the monitor ...

  • Eizo FlexScan F35 - page 50

    30 9 SPECIFICA TIONS 9 SPECIFICA TIONS Electrical Specifications CRT Dot Pitch 0.28 mm CRT Size 39 cm (15 inch) class 90 ° deflection FS type CRT Surface Anti-Reflective SuperErgoCoat ® Scan Frequency Horizontal: 27 kHz-70 kHz (Automatic) V ertical: 50 Hz-120 Hz (Automatic) Max. Active Display Area 280 mm (H) x 210 mm (V) (11.0" (H) x 8.2&qu ...

  • Eizo FlexScan F35 - page 51

    100 APPENDIX APPENDIX Pin Assignment Pin-Belegung Affectation des Broches D-Sub mini 15 pin connector Pi n No . Signal Pin.No. Signal 1 Red video 9 No pin 2 Green video 1 0 Gr ound 3 Blue video 1 1 (shorted) 4 Ground 1 2 D a t a 5 No p in 1 3 H.Sync 6 Red ground 14 V .Sync 7 Green ground 1 5 C lock 8 Blue ground ...

  • Eizo FlexScan F35 - page 52

    101 A APPENDIX Timing Charts Timing-Übersichten Synchronisation des Signaux Based on the signal diagram shown below , 4 factory presets have been registered in the monitor's microprocessor . Der integrierte Mikroprozessor des Monitors unterstützt 4 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme). 4 signaux ont é ...

  • Eizo FlexScan F35 - page 53

    102 APPENDIX V GA (te xt) T 720 dots x 400 lines mode Unit A B C D E F µ s 0.636 3.813 1.907 6.356 25.422 31.778 D o t 18 108 54 180 720 900 m s 0.381 0.064 1.111 1.556 12.712 14.268 Line 1 2 2 3 5 4 9 40 0 4 4 9 Frequencies: fd/28.322MHz, fH/31.468kHz, fV/70.087Hz Interlace: N o n Sync Polarity: H/Negative, V/Positive Video Signal Level: 0 . 7Vp- ...

  • Eizo FlexScan F35 - page 54

    103 A APPENDIX T 832 dots x 624 lines mode Unit A B C D E F µ s 0.559 1.115 3.910 5.586 14.524 20.111 D ot 32 64 224 320 832 1152 m s 0.020 0.060 0.784 0.865 12.549 13.414 Line 1 3 3 9 4 3 6 24 66 7 Frequencies: fd/57.28MHz, fH/49.73kHz, fV/74.55Hz Interlace: N o n Sync Polarity: Separate sync, TTL, Negative Video Signal Level: 0.7Vp-p/75 Ohm Dime ...

  • Eizo FlexScan F35 - page 55

    Congratulations! Y ou have just purchased a TCO’95 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also, to the further development of environmentally adapted electronics products. Why do we have environmen ...

  • Eizo FlexScan F35 - page 56

    TCO’95 is a co-operative project between Environmental Requirements Br ominated flame retardants Brominated flame retardants are present in printed circuit boards, cables, wires, casings and housings. In turn, they delay the spread of fire. Up to thirty percent of the plastic in a computer casing can consist of flame retardant substances. These a ...

  • Eizo FlexScan F35 - page 57

    W ARNING! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provided reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in ...

  • Eizo FlexScan F35 - page 58

    Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ZH1/618/10.80 mit dem ideosignal, 1024 Punkte x 768 Zeilen, RGB analog, 0,7Vp-p und mindestens 85,0Hz Bildwiederholfrequenz, non interlaced. Die Übereinstimmung mit den Ergonomie-V orschriften ZH1/618 kann nur dann garantiert werden, wenn dieser Monitor mit den ...

Manufacturer Eizo Category Computer Monitor

Documents that we receive from a manufacturer of a Eizo FlexScan F35 can be divided into several groups. They are, among others:
- Eizo technical drawings
- FlexScan F35 manuals
- Eizo product data sheets
- information booklets
- or energy labels Eizo FlexScan F35
All of them are important, but the most important information from the point of view of use of the device are in the user manual Eizo FlexScan F35.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Eizo FlexScan F35, service manual, brief instructions and user manuals Eizo FlexScan F35. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Eizo FlexScan F35.

Similar manuals

A complete manual for the device Eizo FlexScan F35, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Eizo FlexScan F35 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Eizo FlexScan F35.

A complete Eizo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Eizo FlexScan F35 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Eizo FlexScan F35, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Eizo FlexScan F35, that we can find in the current document
3. Tips how to use the basic functions of the device Eizo FlexScan F35 - which should help us in our first steps of using Eizo FlexScan F35
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Eizo FlexScan F35
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Eizo FlexScan F35 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Eizo FlexScan F35?

Use the form below

If you did not solve your problem by using a manual Eizo FlexScan F35, ask a question using the form below. If a user had a similar problem with Eizo FlexScan F35 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)